[ROM][STABLE][J600G]Revolution S9 ROM - Samsung Galaxy J6 ROMs, Kernels, Recoveries, & Oth

[ROM][STABLE][J600G]Revolution S9 ROM - Samsung Galaxy J6 ROMs, Kernels, Recoveries, & Oth

Revolution ROM for J6 (2018)
It all starts here
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
DO NOT TAKE MY STUFF WITHOUT PERMISSION!
YOU WILL BE REPORTED BY DOING SO
Introducing, my very first direct S9 port!
So, you decided to buy this phone, huh? Maybe you had no choice, maybe you only saw "octa-core chip" and jumped all over it, or maybe you just assumed that you would just download ROMs from XDA to make this device better since all other devices contain ROMs on this forum by the truck loads.
Then you get to the sad realization that generally speaking, this phone is really bad and no developer would want to buy this 2018 device with a 2016 processor and barely any sensors lol
Well, I hope I can at least ease a bit of that pain with this ROM. I am no master developer, but at least I know my development a-b-c's... but just barely.
So, it is only fair to warn you the following (aside from that giant disclaimer at the beginning of the thread lol):
If you are expecting this device to run as smooth as an S9 phone, have the expectation to download this ROM to improve your battery life by 50% , are expecting this ROM to run Fortnite at the highest settings possible as an actual S9 would or even expect the Benchmark scores like Antutu to increase, THEN STOP! STAY IN STOCK ROM!
AS I STATED, I AM NO MASTER DEVELOPER, MY KNOWLEDGE ONLY EXTENDS TO FRAMEWORK EDITING, I HAVE NO KNOWLEDGE ON KERNEL TWEAKING
And even if a dev tweaked the kernel to run faster, I doubt any of the above would happen, lower your expectations you're not dealing with a high end device
OK, rant out of the way. Let's get started!
Supported variant: SM-J600G (I do not know if this will run on any other variant, if you decide to try please give me feedback so I can update post)
Features:
*S9 Firmware
*Edge panels
*Edge lighting
*Smart select
*GIF recording
*Smart stay
*S9 Multiwindow (Pop-up view action)
*Open notifications in multiwindow mode
*Smart capture
*Scroll capture
*Infinity wallpapers
*And I think for the most part, all the features that the J6 offers by default
*More to come, of course
ROM Info:
*Based on S9 firmware G960FXXS2BRJ6
*Deodexed
*Zipaligned
*Busybox
*Slightly debloated
*Rooted with Magisk
Bugs:
*Mobile Hotspot does not work
*Phone lags at the initial boot due to being rooted with Magisk. To fix this, you just have to reboot upon getting to welcome screen
*Resolution looks a bit blurry. To fix this, just go to Settings->Display Settings->Resolution and change resolution to WQHD+, apply and the change back to HD+ and apply. Then the bug is fixed.
*This is initial release, expect bugs other than these mentioned. Please report if you find more
*AOD: Does not work at the moment
*Currently does not work with 2 SIMs inserted [FIXED]: Thanks for tutorial to BlackMesa123 here and thanks to @corsicanu for discovery
Changelog:
*13/12/20108 V1.0*
Initial release
Download links:
Google Drive
More mirrors to come
Installation instructions
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone
This is done to remove lag due to being rooted with Magisk
-Complete setup
-Enjoy
Special thanks!
@ananjaser1211 for sharing all his knowledge on S9 porting. Fixed a couple of major bugs because of his guidance. You are awesome, dude!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
Revolution S9 ROM for J6, ROM for the Samsung Galaxy J6+
Contributors
ShaDisNX255
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Source Code:
https://github.com/Albe96XDA/j6lte
(Thanks Albe, you rock!)
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2018-12-13
Created 2018-12-14
Last Updated 2018-12-13

Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group

How to report a bug/Ask for a change
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Lol this is #3

Final reservation

Awesome work :good: glad we see more people interested in development. keep it up

J6 or j6+ ? And where could i get twrp ?

Amazing work bud, the ROM is truly awesome.

danicadanicadanica said:
J6 or j6+ ? And where could i get twrp ?
Click to expand...
Click to collapse
Normal J6, I've asked the thread to be moved

Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..

danicadanicadanica said:
Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..
Click to expand...
Click to collapse
It should be the same, but I can't guarantee it. An F user told me it runes fine

So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G

danicadanicadanica said:
So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G
Click to expand...
Click to collapse
Here is TWRP: https://forum.xda-developers.com/galaxy-j/development/recovery-twrp-3-2-2-0-galaxy-j6-on6-t3819751

Ok thanks feedback soon

You're doing great job.Keep it up!

Thanks for this rom. Will try it. Just Got my done back after screen repair so rmm lock still active.

Shouldn't this be in the development section?

ashyx said:
Shouldn't this be in the development section?
Click to expand...
Click to collapse
Yes, yes it should (but I need to post kernel sources and stuffs and I'm struggling to do that since its just stock kernel, but I'll get that sorted soon to get it fixed

Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix

KRiST0F said:
Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix
Click to expand...
Click to collapse
I am the complete opposite
I like the Samsung stuffs

Related

[ROM][8.0][STABLE][J600G]NcX ROM A8+ Port

(excuse my noobish image editing skillz lol)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Fully ported A8+ ROM A730FXXS3BRK5
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots
And stock J6 stuff
Smart view may be non-functional
SuperSU rooting was added in Aroma installer for testing purposes only, do not select this as it will not boot the phone, root only with Magisk
Edge Lighting doesn't work
Bixby Vision in camera does not work
Only Phoenix Kernel and stock kernel boot for now with Magisk on first installation, I am trying to fix so that all kernels work on first time set-up
02/03/19: Release
Google Drive
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
@ananjaser1211 for pretty much doing this PORT himself lol. If it wasn't for his guidance, this would be a failed ROM. Also for Helios kernel!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@By Zonik For letting me use SynexOS ROM control. I am keeping the original name.
RC Source Code (@Wuby986 & @daxgirl): https://github.com/Zonik94/6thGear-RomControl-v2.0
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255
Source Code: https://github.com/Albe96XDA/j6lte
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-03-02
Created 2019-03-02
Last Updated 2019-03-02

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of NcX again
[Q] My phone will still not boot, what is my last resort?
[A] Please do the following:
Re-install NcX
After installation finishes, select "Save Logs"
It will save a .txt file in your memory, please post so I can review your problem
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted, even though I selected a root method
[A] Please make sure you root via Magisk. SuperSU is only there for testing and did not work.
[Q] The phone is going way too slow!
[A] Caused by Magisk. Just reboot the phone 2 or 3 times and the lag will be gone forever.
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group

Awesome work! The ROM works flawlessly on my J600F.
Good luck with this one!

ShaDisNX255 said:
(excuse my noobish image editing skillz lol)
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Fully ported A8+ ROM A730FXXS3BRK5
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots
And stock J6 stuff
Smart view may be non-functional
SuperSU rooting was added in Aroma installer for testing purposes only, do not select this as it will not boot the phone, root only with Magisk
Edge Lighting doesn't work
Bixby Vision in camera does not work
Only Phoenix Kernel and stock kernel boot for now with Magisk on first installation, I am trying to fix so that all kernels work on first time set-up
02/03/19: Release
Google Drive
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
@ananjaser1211 for pretty much doing this PORT himself lol. If it wasn't for his guidance, this would be a failed ROM. Also for Helios kernel!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@By Zonik For letting me use SynexOS ROM control. I am keeping the original name.
RC Source Code (@Wuby986 & @daxgirl): https://github.com/Zonik94/6thGear-RomControl-v2.0
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255
Source Code: https://github.com/Albe96XDA/j6lte
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-03-02
Created 2019-03-02
Last Updated 2019-03-02
Click to expand...
Click to collapse
Ah ok this is the one will give feedback soon

A must have rom unfortunately it corrupts efs (Unknown baseband and hardware version) if i installed xposed systemless which is a very important part of my daily usage luckily i got my efs backup. Also theres a minor bug in offline charging animation.

Last test now i found out the problem its not xposed making baseband corrupted its the selinux thing because it triggers when i installed viperfx which needs enforcing the rom itself has fake enforcing..

danicadanicadanica said:
Last test now i found out the problem its not xposed making baseband corrupted its the selinux thing because it triggers when i installed viperfx which needs enforcing the rom itself has fake enforcing..
Click to expand...
Click to collapse
What kernel did you install?

ShaDisNX255 said:
What kernel did you install?
Click to expand...
Click to collapse
All kernel and also stock all failing

Awesome Work.Keep it up mate! ✌

I need help I would like to make an Edge Panel port for my J4 + J415F, could you teach me how to do it @ShaDisNX255 ?
I already have root and TWRP

chalofito said:
I need help I would like to make an Edge Panel port for my J4 + J415F, could you teach me how to do it @ShaDisNX255 ?
I already have root and TWRP
Click to expand...
Click to collapse
Sure, you can look me up in Telegram, which is what I use as a messaging service

sir can i flash this on J600F?

jam24ph said:
sir can i flash this on J600F?
Click to expand...
Click to collapse
I think some F users have flashed it successfully.

Thank you for this ROM, installed on SM-J600FN

64 bit rom? I know a8+ is 64 bit but just wanted to make sure. I'm fed up with stock 32 bit rom. I dont have better data plan. So please someone reply :crying:

MadhanMurali said:
64 bit rom? I know a8+ is 64 bit but just wanted to make sure. I'm fed up with stock 32 bit rom. I dont have better data plan. So please someone reply :crying:
Click to expand...
Click to collapse
The J6 can't run 64 bit unless Samsung makes it themselves

Thank you for reply

UI crashed
After installation UI is unresponsive..........sometimes it crashes too.....!! please help........!!!!!

[ROM][OneUI][Pie][MAGISK][SM-J600G/F]Stock OneUI for J6

Stock OneUI Release for J6
So, a couple of days ago OneUI was released for the SM-J600F. I simply took the ROM and made it flashable via ZIP
This is JUST STOCK ONEUI """OFFICIAL""" for the J6, DO NOT EXPECT EXTRA FEATURES!
Also, I debloated it lol
BUT
I want to make something clear. If you have not read this and this allow me to summarize
Pie brings new locks to the table, something far worse than rmm lock. If you flash Pie officially, either via OTA or via Odin, these new locks will prevent you from rooting, as I understand it.
The workaround is to flash Pie but with Oreo BL.
BUT
We don't know how long that will keep working
Samsung can easily make Pie only boot with Pie BL.
So... for now... DO NOT UPLOAD YOUR BOOTLOADER TO PIE YET OR YOU WILL NOT BE ABLE TO ROOT OR FLASH CUSTOM BINARY ANYMORE!
And this is where this zip comes in handy!
This ZIP will not change your BL (it will keep your Oreo BL) and included is a kernel (Helios Pie kernel) that fixes small issues. Also, if anything were to go wrong, you still have TWRP to backup and restore, how awesome is that?
So, you have been warned!
Downloads:
Android File Host:
https://www.androidfilehost.com/?fid=1395089523397933484
Mega: https://mega.nz/#!5BEXVSgJ!I6ta7PQQFHFqF9b1i3QeE5pANf1lVmF_c87uS6p8vEI
OneDrive: https://1drv.ms/u/s!AjUnizekeauKhAHeYnt-lwr5YZDW
(I'll try to upload to GDrive and AFH soon, I promise)
Instructions:
-Create a backup (just in case)
-Wipe system and data
-Flash zip
-Reboot and wait 10 minutes
If after 10 minutes, it is still in logo, force a reboot (Hold VOL +, VOL - and POWER) and then the ROM will work
"Features":
-Official Pie!
-In theory, should not have major bugs
-Pre-rooted with Magisk
-Debloated
If you appreciate having Pie early (and rooted!) please consider a donation to ananjaser1211, who was kind enough to compile Helios Pie kernel without even having the device!!!
http://paypal.me/ananjaser1211
@ananjaser1211 for compiling Pie kernel for the J6... without even having the device! Amazing job!
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
XDA:DevDB Information
[STOCK][OneUI][9.0]Stock OneUI for J600 G/F, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, ananjaser1211
Source Code: [url]https://github.com/ananjaser1211/Helios_7870[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-04-03
Last Updated 2019-04-03

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group

Enjoy Pie

Yes its working

You should tell that vendor will be also replaced.

Downloading
Downloading...

nice work

Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.

MKashifSajjad said:
Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.
Click to expand...
Click to collapse
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?

Battery takes about 2 cycles to stabilize. My first testers and me did notice higher than normal drain but then reduced the drain a lot.

Aleko91 said:
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?
Click to expand...
Click to collapse
It's normal for any camera to flicker when taking photos of older tvs as far as I know

j6 plus :crying:
???

This is not the J6+ forum lol

Will it work for On6
J600G please reply

naviidgull said:
Will it work for On6
J600G please reply
Click to expand...
Click to collapse
Yeah, maybe lol. Backup before you try anything

Digital TV is working?

Links are not working anymore bro please bro new link

ShaDisNX255 said:
It's normal for any camera to flicker when taking photos of older tvs as far as I know
Click to expand...
Click to collapse
on stock oreo rom it's not flickering , but it flickers even on odex stock rom

[ROM][J600X] H-ROM A7 PORT [Pie][OneUI][64 bits]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
As per creator's request, links have been removed
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group

Just so you know guys, I am constantly trying to fix bugs on this. My porting skills are not very good when it comes to odexed software lol
So I hope to make this port better over time.

H-ROM updated to V2 which adds stability and a few features I had previously removed.
Also it fixed face unlock oh and now, secure folder works. You just need to flash this: Secure Folder patch
Please give thanks to the post for making this zip to fix Secure Folder in this ROM
Enjoy!

Fixed Smart View.
Thanks to @KassemSYR who gave me the final key... to add lines in build.prop

I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading

Kostas172 said:
I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading
Click to expand...
Click to collapse
Well, honestly I've never had problems with WiFi. I only had to include it in the thread because it was reported on the original H ROM.
I can tell you with confidence that my WiFi has worked perfect.
When using any type of linux, you can use Heimdall instead of Odin

Thank you dude!! im testing the rom now:
Bugs:
1. Battery Drain (or bad battery performance).
2. The Rom is slower/laggy in multitask.
Please upload the wallpapers and ringtones in a flashable files, are amazing!!

Thanks for make this rom!
Thanks for make this rom very much^^
But I wish you add Bixby Voice in this rom.
This rom especially has very few bugs, haha

Knox
Hi sir, I'm a H-ROM A7 PORT V2.0 rom user now.
I want to add knox to this rom. How I Can?

ShaDisNX255 said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
Google Drive
OneDrive
Old Version
V1.0:
Google Drive
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23
Click to expand...
Click to collapse
I am using v2
When I start calling someone the network disappeared but mobile data working fine only problem in calling
And I can't restore my stock rom
Plzz help
Finally it fixed....

You are no longer authorized to make a derivated post of my roms. Please, remove download links.

Please close this thread, thanks.

Thread closed.
Closed due to OP's request.
Camo.
XDA Moderation Team

S20PORT_ROM_G96xF/DS/FD/N_G985FXXU1ATBM

Galaxy Rom S20 Port for N960X + G960X-G965X
Changelog:
* Android Q | Version 10
* Base on latest Galaxy Note9 firmware
* Base port G985FXXU1ATBM
* Support multiple languages
* Support multiple CSC
* Patched SecureFolder
* Enable many hiden feature like:
App lock, Network speed, Screen capture toogle, etc...
* Enable Multi user
Official:
Telegram
MOD EDIT. Link removed
Donate for Dev:
MOD EDIT Link removed.
Special thanks and credit goes to:
@topjohnwu for Magisk
 @amarullz for Aroma installed
@yarpiin for Kernel
@Grouxho for GrxSettings
@KHongloi for idea patch SecureFolder
and members come from @xda forum for some other guide
Contributors: Trần Phong

IF YOU LIKE AND RECPECT MY WORK, PLEASE DONATE
MOD EDIT. Link removed
JOIN MY GROUP AND SUPPORT
MOD EDIT. Link removed
========================================
INSTRUCTIONS:
1. To avoid bootlop/stuck logo you must be update bootloader to Q bootloader.
Download bootloader here: page 1
MOD EDIT. Link removed
2. Since Android Q s9 have system_root you must be install lastest TWRP with support system_root version.
Download TWRP here: LINK TWRP page 1
MOD EDIT. Link removed
3. If you instal lastest rom, u NEED updated bootloader because we NOT included in rom.
GUIDE INSTALL:
1. Reboot to recovery mode(press volume up+bixby+power)
2. make nandroid backup
3. wipe system
4. wipe data
5. wipe cache&dalvik
6. Format data/YES before flashing ROM ONLY FC theme services or bug gone
7. flash rom.zip
8. reboot system wait 3 minutes

I think this is kinda scam or something. All they do is asking about donations. And maybe the telegram kinks should be deleted. I joined the group and tried to communicate with them and all I got is flame, bad behavior and yet, asked to donate. I think the mods should delete the links to telegram and investigate if there is really a rom or just scam project from poor people trying to get some money from people on XDA.
Doing it this way, I think really kills the spirit of the XDA. Also, I notice when somebody don't speak their language, they don't give any support or information. Very disrespectful behavior. Seems like also the guy who build some los rom managing the project. I think people should stay always from this rom, there may be some spyware or adware inside. Sharing also a lot of warez on their channel, which is tottaly against the rules of XDA.

And one more...They think if you don't speak their language can insult you. Very disrespectful and ugly behavior.
However, if I somehow braking the rules by writing those post, I will take the consequence. But I think I had to throw some light on this case.

that's guys from LOS 120hz? Just reported.

Ganjax said:
that's guys from LOS 120hz? Just reported.
Click to expand...
Click to collapse
Yes he is. Those people should stay always from XDA. The mods did the right thing to lock his threat. Everyone knows there are hardware limitations and no one rom can provide such function.
Nevermind, the familiar developer Alexis port his rom to our device. He is trustworthy and I think is safe to try his rom. Everyone who want to try some s20 goodies.

Leon said:
Yes he is. Those people should stay always from XDA. The mods did the right thing to lock his threat. Everyone knows there are hardware limitations and no one rom can provide such function.
Nevermind, the familiar developer Alexis port his rom to our device. He is trustworthy and I think is safe to try his rom. Everyone who want to try some s20 goodies.
Click to expand...
Click to collapse
I know Alexis rom from S8. Really trusted developer.

Thread closed!

[ROM] [10] [Official] Android Open Source Mutation - hotdogb

Welcome to Android Open Source Mutation for the OnePlus 7T
(previously Xtended-Mutate)
Code:
**DISCLAIMER**
We bear absolutely no responsibility for any damages to your device,
from following any instructions or flashing anything we provide.
All software is 'as-is' and no warranty is implied or stated and will not be honored.
As always flash at your own risk.
Everything you could want in a ROM.... and more
ROM originally derived from MSM-Xtended
Features list:
- Android R notification headers
- Substratum support
- Theming (accents, gradients, dark mode)
- FOD icon customizer
- Fully customizable animations
- Different fonts included
- Full sounds customization
- Power menu customization
- Full MD2 support
- Signature spoofing
- Remove ADB notification
- Aggressive battery
- Sensor block per package
- OmniStyle and OmniJaws for headers and weather
- Ambient display and Always-On Display
And even more!
TODO:
- Rebase on Lineage sources
- Finish rebranding
- Add all the features, ALL OF THEM.
- Ok maybe not all.
What works:
- FOD works
- Alert slider works
- DC dimming works
- 60/90/Auto refresh rate
Bugs:
- Auto brightness may have issues
- The carrier Visible is known not working on latest builds.
- ??? This is where you tell us
Install instructions
* Always make sure to flash latest OxygenOS to each slot before installing this ROM!
* Flashing via fastbootd is recommended for now. Although a TWRP is available, it is closed source and therefore in violation of the TWRP GPLv3 license and we therefore cannot link to it here. OTA zips and fastbootd zips will be provided.
1. Set up adb and fastboot on your computer with the latest zip from google. Get them here
2. Ensure your device is upgraded to the latest OxygenOS. We recommend flashing latest to both slots before proceeding.
3. Reboot to bootloader
Code:
adb reboot bootloader
4. Ensure your bootloader is unlocked. This can be done with
Code:
fastboot oem unlock
You'll need to confirm on device. T-Mobile users have to obtain the unlock from T-Mobile first.
5. Now this is the different part with Android 10. If you choose to use the non-official TWRP, you may flash the OTA zip as usual. Otherwise assuming the ROM fastbootd zip is in the same location as your prompt:
Code:
fastboot update -w <file>.zip
6. Reboot and enjoy! Never flash magisk on first reboot as this can cause issues. Always boot at least once.
Updates
* Recommended method is via fastbootd
1. With adb set up and enabled:
Code:
adb reboot bootloader
2. In bootloader mode:
Code:
fastboot update <name>.zip
Reporting bugs:
- To report a bug, clean flash is MANDATORY.
- We provide no support to (Ed)Xposed users, or custom kernels (some custom kernels are known to break FOD, DC dimming, etc). Bugs should be reported with magisk in safe mode or with no modules enabled. We also provide no support for any users of AIO "tweakers" (eg, FDE.AI, LSpeed, NFS, etc), the reason being those are well known to cause instability.
- A good bug report should contain:
Code:
- Device:
- ROM version (eg date ROM was built):
- Magisk used?:
- Tried a clean flash?:
- Concise description (eg, no "fingerprint not working plzzz help"):
- Logcat or dmesg (for boot issues, try the Magisk Module LogCatcher, logcat's I recommend Logcat Reader. Reports without logs WILL BE IGNORED):
Support:
-Telegram: https://t.me/joinchat/KNY93ke5jYFhTFYpwyR3Lw
-XDA: this thread (duh)
Downloads:
{Mod edit}
Device sources:
Kernel: https://github.com/Xtended-Mutate/kernel_oneplus_sm8150
Device: https://github.com/Xtended-Mutate/device_oneplus_hotdogb
Many thanks to:
@linuxandria
jacks84
@Abalam
Creators of MSM-Xtended
AOSiP for some device related things
BlissROMs for a handful of features
Everyone else we probably forgot to mention
We request all discussion to be courteous, on topic, and adding to the discussion. Any hateful or off-topic will be promptly be delt with. Moderators, do what you have to. Thank you.
XDA:DevDB Information
[ROM] [10] [Official] Android Open Source Mutation - hotdogb, ROM for the OnePlus 7T
Contributors
linuxandria, Abalam, jacks84
Source Code: https://github.com/Xtended-Mutate
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS 10.0.9 or newer
Based On: MSM-Xtended
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2020-05-12
Created 2020-05-14
Last Updated 2020-05-17

Thanks for release !
Looks like a cool rom.
So,
fastboot update -w <file>.zip
Click to expand...
Click to collapse
Will be all thats needed to flash?
No need to unzip and flash each file manually , as we do with other ROMs for our OnePlus 7t?

hightech316 said:
Thanks for release !
Looks like a cool rom.
So,
Will be all thats needed to flash?
No need to unzip and flash each file manually , as we do with other ROMs for our OnePlus 7t?
Click to expand...
Click to collapse
No need to unzip no

linuxandria said:
No need to unzip no
Click to expand...
Click to collapse
Awesome.
Is it Ok coming from MSM-Xtended ,or should we flash back to lastest OxygenOS first, then flash your rom?

Thanks for a new room! This looks pretty dope

hightech316 said:
Awesome.
Is it Ok coming from MSM-Xtended ,or should we flash back to lastest OxygenOS first, then flash your rom?
Click to expand...
Click to collapse
I always recommend clean flashing, as we have some serious changes

Can some one upload some screenshot of this ROM, please?

First, THANK YOU VERY MUCH!!!
Next:
Does it have face unlock? I work at the post office and have to use gloves. Face unlock is a must have for me.
Also, does Google pay work?

Congratulations you guys for getting all together now on XDA. Jack: Lets get you back on XDA so you can get some XDA points

Been using this for a day now and just wanted to say this rom is amazing! The customization and the performance is perfect. Thanks again!

Kanging entire project without permission, isn't what we promote on xda
aer0zer0 said:
Congratulations you guys for getting all together now on XDA. Jack: Lets get you back on XDA so you can get some XDA points
Click to expand...
Click to collapse
And luckily, for doing that he decided to use MSM-Xtended with just logo changes and nothing further, no addition, no fixes, just nothing.
Going through the commit history was showing further more. I mean, I have heard many devs saying cherry-picking is the easiest, still people don't want to ?
Moderators, the entire of our work has been used without any notice or permission or anything. Here I mean entire of the work of Team Xtended and we object to it.
Kindly let us know the process to take down this thread.
Regards
BOND

SuperDroidBond said:
And luckily, for doing that he decided to use MSM-Xtended with just logo changes and nothing further, no addition, no fixes, just nothing.
Going through the commit history was showing further more. I mean, I have heard many devs saying cherry-picking is the easiest, still people don't want to ?
Moderators, the entire of our work has been used without any notice or permission or anything. Here I mean entire of the work of Team Xtended and we object to it.
Kindly let us know the process to take down this thread.
Regards
BOND
Click to expand...
Click to collapse
I sort of knew this was going to happen when I saw this thread but yea he basically just cloned y'all entire work without any changes hell I'm surprised it took this long tho for anyone to notice lol.

Unfortunately due to recent feedback and discussions, this thread will be locked until further notice! The project will be undergoing some serious reworking and reevaluation!
@MikeChannon if you could lock this thread we'd be grateful

SuperDroidBond said:
And luckily, for doing that he decided to use MSM-Xtended with just logo changes and nothing further, no addition, no fixes, just nothing.
Going through the commit history was showing further more. I mean, I have heard many devs saying cherry-picking is the easiest, still people don't want to ?
Moderators, the entire of our work has been used without any notice or permission or anything. Here I mean entire of the work of Team Xtended and we object to it.
Kindly let us know the process to take down this thread.
Regards
BOND
Click to expand...
Click to collapse
You have absolutely no right to say this. We have violated no license, and have given all proper authorship and credits. In addition, while it is most certainly true we have based our rom on MSM-Xtended (and have never once denied it!), we have added a smattering of new features and unbroken things they have broken on our supported devices.
Kindly do not make exaggerated accusations, and if you have something to say, let's discuss it in private, not taking to public forums to complain about someone using your work. Personally if someone based off my work, I'd be complimented
If you want to discuss anything in a constructive manner, my telegram username is linuxandria, otherwise do not further pollute our chatrooms and threads with any more of this nonsense, thanks.

And I'll kindly remind everyone that you have kanged the entire work of either AOSP or LOS and you don't see them coming into your xda threads complaining about using their works without violating any licenses and maintaining proper authorship.
Regards

In before the lock! Lol

linuxandria said:
And I'll kindly remind everyone that you have kanged the entire work of either AOSP or LOS and you don't see them coming into your xda threads complaining about using their works without violating any licenses and maintaining proper authorship.
Regards
Click to expand...
Click to collapse
And let's not forget gzosp, either. There was no MSM without GZOSP.

linuxandria said:
Unfortunately due to recent feedback and discussions, this thread will be locked until further notice! The project will be undergoing some serious reworking and reevaluation!
@MikeChannon if you could lock this thread we'd be grateful
Click to expand...
Click to collapse
THREAD CLOSED!
Please advise the moderators' team to re-open the thread when re-working and re-evaluation has been finished but especially when ready to provide a workable link to kernel source.
Request to everybody: If moderator's assistance is required, please do not simply state this in a post! XDA currently has more than 35.5M threads and we cannot and do not scan every single thread and post. For timely actions please use the report function!

Database Info

welcome