Database Info

[ROM][STABLE][J600G]Revolution S9 ROM

Revolution ROM for J6 (2018)
It all starts here
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
DO NOT TAKE MY STUFF WITHOUT PERMISSION!
YOU WILL BE REPORTED BY DOING SO
Introducing, my very first direct S9 port!
So, you decided to buy this phone, huh? Maybe you had no choice, maybe you only saw "octa-core chip" and jumped all over it, or maybe you just assumed that you would just download ROMs from XDA to make this device better since all other devices contain ROMs on this forum by the truck loads.
Then you get to the sad realization that generally speaking, this phone is really bad and no developer would want to buy this 2018 device with a 2016 processor and barely any sensors lol
Well, I hope I can at least ease a bit of that pain with this ROM. I am no master developer, but at least I know my development a-b-c's... but just barely.
So, it is only fair to warn you the following (aside from that giant disclaimer at the beginning of the thread lol):
If you are expecting this device to run as smooth as an S9 phone, have the expectation to download this ROM to improve your battery life by 50% , are expecting this ROM to run Fortnite at the highest settings possible as an actual S9 would or even expect the Benchmark scores like Antutu to increase, THEN STOP! STAY IN STOCK ROM!
AS I STATED, I AM NO MASTER DEVELOPER, MY KNOWLEDGE ONLY EXTENDS TO FRAMEWORK EDITING, I HAVE NO KNOWLEDGE ON KERNEL TWEAKING
And even if a dev tweaked the kernel to run faster, I doubt any of the above would happen, lower your expectations you're not dealing with a high end device
OK, rant out of the way. Let's get started!
Supported variant: SM-J600G (I do not know if this will run on any other variant, if you decide to try please give me feedback so I can update post)
Features:
*S9 Firmware
*Edge panels
*Edge lighting
*Smart select
*GIF recording
*Smart stay
*S9 Multiwindow (Pop-up view action)
*Open notifications in multiwindow mode
*Smart capture
*Scroll capture
*Infinity wallpapers
*And I think for the most part, all the features that the J6 offers by default
*More to come, of course
ROM Info:
*Based on S9 firmware G960FXXS2BRJ6
*Deodexed
*Zipaligned
*Busybox
*Slightly debloated
*Rooted with Magisk
Bugs:
*Mobile Hotspot does not work
*Phone lags at the initial boot due to being rooted with Magisk. To fix this, you just have to reboot upon getting to welcome screen
*Resolution looks a bit blurry. To fix this, just go to Settings->Display Settings->Resolution and change resolution to WQHD+, apply and the change back to HD+ and apply. Then the bug is fixed.
*This is initial release, expect bugs other than these mentioned. Please report if you find more
*AOD: Does not work at the moment
*Currently does not work with 2 SIMs inserted [FIXED]: Thanks for tutorial to BlackMesa123 here and thanks to @corsicanu for discovery
Changelog:
*13/12/20108 V1.0*
Initial release
Download links:
Google Drive
More mirrors to come
Installation instructions
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone
This is done to remove lag due to being rooted with Magisk
-Complete setup
-Enjoy
Special thanks!
@ananjaser1211 for sharing all his knowledge on S9 porting. Fixed a couple of major bugs because of his guidance. You are awesome, dude!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
Revolution S9 ROM for J6, ROM for the Samsung Galaxy J6+
Contributors
ShaDisNX255
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Source Code:
https://github.com/Albe96XDA/j6lte
(Thanks Albe, you rock!)
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2018-12-13
Created 2018-12-14
Last Updated 2018-12-13

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Lol this is #3

Final reservation

Awesome work :good: glad we see more people interested in development. keep it up

J6 or j6+ ? And where could i get twrp ?

Amazing work bud, the ROM is truly awesome.

danicadanicadanica said:
J6 or j6+ ? And where could i get twrp ?
Click to expand...
Click to collapse
Normal J6, I've asked the thread to be moved

Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..

danicadanicadanica said:
Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..
Click to expand...
Click to collapse
It should be the same, but I can't guarantee it. An F user told me it runes fine

So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G

danicadanicadanica said:
So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G
Click to expand...
Click to collapse
Here is TWRP: https://forum.xda-developers.com/galaxy-j/development/recovery-twrp-3-2-2-0-galaxy-j6-on6-t3819751

Ok thanks feedback soon

You're doing great job.Keep it up!

Thanks for this rom. Will try it. Just Got my done back after screen repair so rmm lock still active.

Shouldn't this be in the development section?

ashyx said:
Shouldn't this be in the development section?
Click to expand...
Click to collapse
Yes, yes it should (but I need to post kernel sources and stuffs and I'm struggling to do that since its just stock kernel, but I'll get that sorted soon to get it fixed

Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix

KRiST0F said:
Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix
Click to expand...
Click to collapse
I am the complete opposite
I like the Samsung stuffs

[TESTING] JDI J1 touch lag fix

If you have a JDI display (what you can verify on MIUI via *#*#6484#*#* and on AOSP via "su [click enter] cat /proc/cmdline" command), you currently get a touch lag (limit) on every Oreo/Pie-based ROM (MIUI too). If you move your finger ultra slowly, the touch pointer stays until you move 2-3mm in distance, then it simply jumps. I really don't want to explain why it feels like crap, but even a single millimeter isn't a small unit on miniaturized computers which often need to be operated in detail (UI sliders, graphic editors, scrolling clickable elements).
So, if you happen to understand that and to already be pissed off, here you go: I built a kernel with the touchscreen firmware extracted by Luca Stefani https://review.lineageos.org/c/LineageOS/android_kernel_xiaomi_msm8996/+/197860 long ago, when Xiaomi still had it fixed. Sadly, the scorpio-o-oss source code drop (which is used on every AOSP Pie ROM) and any of the official Oreo MIUI builds no longer contain it.
Then here we go: so far, only one tester booted it for me and it was on Syberia ROM, while the image I link is made on top of LOS 16 trees. I want to test with few people before committing. Maybe it's too much of a hassle, but at least nobody will tell me it's dangerous or irrelevant.
Your mission is:
- test it
- don't be dumb to ask about anything explained in the thread
https://transfer.sh/12rbtB/lineage-16.0-20190725-UNOFFICIAL-capricorn.zip
For moderators: even if it's kernel, it's more of a mod and nothing with plans to be further maintained. If you really decide to move it, it's up to you, but to me, it wouldn't make sense.

It works! Thanks a lot!

Jdi

Current state: need to figure out why fp gets broken, as it turns out it is :| If I won't come up with any solution, I'll just build the kernel sometimes, for the people who hate this lag and couldn't use any ROM with it (like me). But I hope I'll fix it up.
Edit: Pie trees may be unfinished or requiring something special, because fp works properly with 15.1 build.
https://transfer.sh/7fHND/lineage-15.1-20181224-UNOFFICIAL-capricorn.zip

Build made on the current sources
https://transfer.sh/12rbtB/lineage-16.0-20190725-UNOFFICIAL-capricorn.zip

Would you make flashable file for twrp, so we could use it with other ROMs .. For example, I`m on Pixel 8.1 Final now ..
Regards

bmasgone said:
Would you make flashable file for twrp, so we could use it with other ROMs .. For example, I`m on Pixel 8.1 Final now ..
Regards
Click to expand...
Click to collapse
First test this build and then I'll link the commit sent to LOS gerrit.

j1505243 said:
First test this build and then I'll link the commit sent to LOS gerrit.
Click to expand...
Click to collapse
I'm not willing to flash a whole rom but curious to try - Could you provide your kernel patch (preferred) or a compiled kernel?
Did you get fingerprint working on Pie?

jamesd__ said:
I'm not willing to flash a whole rom but curious to try - Could you provide your kernel patch (preferred) or a compiled kernel?
Did you get fingerprint working on Pie?
Click to expand...
Click to collapse
Nobody tested the existing build yet, that's the only reason why I'm not pushing it to gerrit.
The source commit is here https://review.lineageos.org/c/LineageOS/android_kernel_xiaomi_msm8996/+/197860

sorry i dont know how to flash it, can u teach me to use it? jdi work on my phone and the touch lag is too bad.
sorry my english is poor

[ROM][SE][8.0][TREBLE][SM-A530F/A730W/A730F]A7 2018 Port Rom V1.0

A7 2018 PORT ROM​
You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!​First you have to treble your device from here
If you appreciate the work i have done, Feel free to buy me a cup of coffee @Paypal ​
Some information you should know..
This is a full A7 2018 port with Treble android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested thoroughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES
- Android 8.0
- Odex System
- Slightly debloated
- Zipaligned
- Optimized for battery and performance
- Full Samsung experience 9.0 without missing vital apps
- And all the goodies Oreo brings
- Based on A750FNPUU1ARK4
- Contains all features from A7 2018 minus hardware specific ones
- All the original features are present (Wifi,Bluetooth, basic camera etc)
Project Treble Rom Features :-
- Full Treble support
- Navigation bar gestures
- AR stickers
- AlwaysOn Display(Aod Touch, Variable brightness)
- BluelightFilter
- BixbyVision
- Samsung DolbyAtmos
- Optimised for A8/A8+
- Many prop and feature tweaks
- DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
- ODM Supported for middleEast , Europe And asian countries
- VoLTE Supported
- Uptodate APN Configration
- Exclusive samsung apps
- And many more additions
Quantum Custom Kernel v1 :-
- Basic Kernel to boot any Rom
- based on A750FNPUU1ARK4 ramdisk
- Full treble ramdisk
- Supports 8.0 and 8.1
- Samsung Security Disabled
- Disabled more knox and logging
- Init.D Support
- Other minor improvments
INSTALL STEPS
ensure you have LATEST TREBLE TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,VENDOR,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
VERY IMPORTANT
DONT FLASH MAGISK BEFORE FIRST BOOT !
Setup your rom and READ the F.A.Q for more information.
BUGS
Samsung camera video recorder (third party recorder apps work)
CREDITS
- @Griffin98 , @lzzy12 , @somadsul , @TaifAljaloo , @ananjaser1211 for all their support and contribution
Downloads. Changelogs , F.A.Qs below​
XDA:DevDB Information
A7 2018 Treble, ROM for the Samsung Galaxy A8 (2018)
Kernel Source Code: https://github.com/prashantpaddune/universal7885
Contributors
prashantp01
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: v1
Stable Release Date: 2019-01-30
Created 2019-01-30
Last Updated 2019-01-30

DOWNLOAD
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Treble Rom V1 based on A7 2018 port[LATEST]
Initial Release
Google Drive : Download
----------------------------------------------------------------
CHANGELOG
V1.0
-initial release

FAQ
Good idea to read this F.A.Q While the rom is installing
Q : This rom supports full treble?
A : Yes, this rom support full treble from A7 2018
Q : If I want to flash GSI, what i have to do?
A : If u planned to flash GSI, just flash this base, and then flash your GSI image from twrp
Q : Phone took alot of time to boot, and is very laggy
A : pay attention to install steps and Don't flash Magisk before first boot
Q : I dont see any EDGE panels after installing
A : Simple, I didn't added
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : What to do after the rom is setup ?
A : Go to samsung apps, let the phone update everthing

Good job sir

Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!

mindlery said:
Just got it set up and... i am treble ready? No way!
There is definitely a positive change in response times and obviously much better use of hardware. Rooted no prob after a long first run and installed after 3 boots. Nice!
Click to expand...
Click to collapse
now that you installed treble fully, you can install GSIs from the treble forums but there is one problem with pie GSIs, some GSIs dont work because of some kind of overlays.. here's a list of GSIs that work and dont work
Avoid these GSIs:
ViperOS (Pie)
Pixel Dust (Pie)
PixelExperience (Pie)
Resurrection Remix (Pie)
HavocOS (Pie)
Liquid Remix (Pie)
MIUI (Oreo)
Oxygen OS (Oreo)
XenonHD (Oreo)
GSIs that work:
Phh-Treble (Pie/Oreo)
AOSP Extended (Pie (6.0)/Oreo)
AOSiP (Pie)
Descendant (Pie)
Bootleggers (Oreo)
Resurrection Remix (Oreo)
Lineage OS (Pie)

Ok nice. Kinda all over the place here. This is crazy. Only because i'm going to try all the ones suggested

Oh. My. God. This is AMAZING! My A8 is gone!

mindlery said:
Oh. My. God. This is AMAZING! My A8 is gone!
Click to expand...
Click to collapse
what do you mean by "gone" ?

587.saboor said:
what do you mean by "gone"
Click to expand...
Click to collapse
Ha. So I've probably tried close to 10 gsi's now and while some were decent, there so far has always been something that makes it unreasonable to stick with.
There's a lot more choices, that's for sure. I was really hoping to nail the rr 9.0 but don't have the patience to fix the partition issue.... so now I am looking at a cool glowing arrow with hopes of no vendor error message at the welcome screen. The install was easy. No idea if this glowing arrow is going to get tired and let me have a spin at it....

Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.

is it normal that my Device now shown as A730F ?
also i noticed a performance decrease

You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!
Click to expand...
Click to collapse
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.

Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss

Someone_Somewhere said:
Just a reminder that certain parts of Android, including but not limited to the Linux Kernel, are licensed under the GNU GPL and other free/open source licenses. You can't say stuff like that.
Other stuff to take note of:
https://forum.xda-developers.com/android/software/mandatory-xda-developers-gpl-t3663172
https://forum.xda-developers.com/android/software/mandatory-development-forum-rules-t3663179
Not trying to attack you, just pointing out that our efforts go further when people share their work.
Click to expand...
Click to collapse
prashantp01 said:
well kernel is OSS, they have rights to do whatever they want to do with sources, as sources are also linked in the thread. TW isn't OSS, if u Think samsung TW is open sources provide me sources links and i make my rom oss
Click to expand...
Click to collapse
So if TW is closed sources i have rights to protect my works from kanging, and quote clearly says `You are NOT allowed to use any part of this rom without my permission! All the apps and stuffs contains my sign So Beware!!` which means u can use but first you have to take my permissions as it's not OSS. Hope you understand and do more research regarding this `

Joseluize said:
Can I use it without root? I mean i don't want to have the phoe rooted for some apps. Thank You.
Click to expand...
Click to collapse
yes, u can root/unroot rom it's upto users
Ztiffn said:
is it normal that my Device now shown as A730F ?
also i noticed a performance decrease
Click to expand...
Click to collapse
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock

prashantp01 said:
yes, u can root/unroot rom it's upto users
Device shown A730F is normal if u want u can change your model name u can change it from device info
also issues regarding performance , there is no such issues. Performance and battery is way better from our stock
Click to expand...
Click to collapse
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open

Ztiffn said:
thank you for the reply
i tried AOSP Phh-Treble today and got again the same feeling compared to this rom, this rom feels a bit "laggy". Don't get me wrong, it's not perma, it happens when i scroll realy quick...maybe it seems to me subjectively like that :cyclops:
atm i got two other issues:
the device didnt't get recognized if i connect it with usb to pc. only in recovery mode.
the developer options crash everytime if i try to open
Click to expand...
Click to collapse
Well if u said aosp phh.... Then its not my rom... Report to phh...what i have made is just vendor for this device

treble roms
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.

stringman666 said:
i have tried multiple treble roms but this is the only one that doesnt have problems and actually has the samsung apps. i was about to untreble my device until i found this rom. anyways wanted to say thanks and good job. i hope soon there will be a samsung pie rom.
Click to expand...
Click to collapse
These roms are laggy only at the start give it 10 hours they calm down.

[ROM][8.0][STABLE][J600G]NcX ROM A8+ Port

(excuse my noobish image editing skillz lol)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Fully ported A8+ ROM A730FXXS3BRK5
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots
And stock J6 stuff
Smart view may be non-functional
SuperSU rooting was added in Aroma installer for testing purposes only, do not select this as it will not boot the phone, root only with Magisk
Edge Lighting doesn't work
Bixby Vision in camera does not work
Only Phoenix Kernel and stock kernel boot for now with Magisk on first installation, I am trying to fix so that all kernels work on first time set-up
02/03/19: Release
Google Drive
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
@ananjaser1211 for pretty much doing this PORT himself lol. If it wasn't for his guidance, this would be a failed ROM. Also for Helios kernel!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@By Zonik For letting me use SynexOS ROM control. I am keeping the original name.
RC Source Code (@Wuby986 & @daxgirl): https://github.com/Zonik94/6thGear-RomControl-v2.0
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255
Source Code: https://github.com/Albe96XDA/j6lte
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-03-02
Created 2019-03-02
Last Updated 2019-03-02

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of NcX again
[Q] My phone will still not boot, what is my last resort?
[A] Please do the following:
Re-install NcX
After installation finishes, select "Save Logs"
It will save a .txt file in your memory, please post so I can review your problem
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted, even though I selected a root method
[A] Please make sure you root via Magisk. SuperSU is only there for testing and did not work.
[Q] The phone is going way too slow!
[A] Caused by Magisk. Just reboot the phone 2 or 3 times and the lag will be gone forever.
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Awesome work! The ROM works flawlessly on my J600F.
Good luck with this one!

ShaDisNX255 said:
(excuse my noobish image editing skillz lol)
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Fully ported A8+ ROM A730FXXS3BRK5
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Bike Mode
Aroma installer (Very few features at the moment)
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
Native blur
Pop-off multi-window for more than 2 windows at the same time
Smart select
Dolby Atmos
Bixby Vision in screenshots
And stock J6 stuff
Smart view may be non-functional
SuperSU rooting was added in Aroma installer for testing purposes only, do not select this as it will not boot the phone, root only with Magisk
Edge Lighting doesn't work
Bixby Vision in camera does not work
Only Phoenix Kernel and stock kernel boot for now with Magisk on first installation, I am trying to fix so that all kernels work on first time set-up
02/03/19: Release
Google Drive
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Select either Phoenix kernel or stock kernel with Magisk ONLY
-If you want to use Oxygen Kernel, you have to install stock kernel first and let it boot for the first time. Then, do a dirty flash and select Oxygen Kernel and it will boot
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone twice
This is done to remove lag due to being rooted with Magisk
-Complete setup
@ananjaser1211 for pretty much doing this PORT himself lol. If it wasn't for his guidance, this would be a failed ROM. Also for Helios kernel!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@By Zonik For letting me use SynexOS ROM control. I am keeping the original name.
RC Source Code (@Wuby986 & @daxgirl): https://github.com/Zonik94/6thGear-RomControl-v2.0
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@DarkLord1731 For Oxygen kernel which you can download here (included in Aroma installer): Oxygen Kernel
@renoxtv For Phoenix kernel which you can download here (included in Aroma installer): Phoenix Kernel
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
NcX ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255
Source Code: https://github.com/Albe96XDA/j6lte
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-03-02
Created 2019-03-02
Last Updated 2019-03-02
Click to expand...
Click to collapse
Ah ok this is the one will give feedback soon

A must have rom unfortunately it corrupts efs (Unknown baseband and hardware version) if i installed xposed systemless which is a very important part of my daily usage luckily i got my efs backup. Also theres a minor bug in offline charging animation.

Last test now i found out the problem its not xposed making baseband corrupted its the selinux thing because it triggers when i installed viperfx which needs enforcing the rom itself has fake enforcing..

danicadanicadanica said:
Last test now i found out the problem its not xposed making baseband corrupted its the selinux thing because it triggers when i installed viperfx which needs enforcing the rom itself has fake enforcing..
Click to expand...
Click to collapse
What kernel did you install?

ShaDisNX255 said:
What kernel did you install?
Click to expand...
Click to collapse
All kernel and also stock all failing

Awesome Work.Keep it up mate! ✌

I need help I would like to make an Edge Panel port for my J4 + J415F, could you teach me how to do it @ShaDisNX255 ?
I already have root and TWRP

chalofito said:
I need help I would like to make an Edge Panel port for my J4 + J415F, could you teach me how to do it @ShaDisNX255 ?
I already have root and TWRP
Click to expand...
Click to collapse
Sure, you can look me up in Telegram, which is what I use as a messaging service

sir can i flash this on J600F?

jam24ph said:
sir can i flash this on J600F?
Click to expand...
Click to collapse
I think some F users have flashed it successfully.

Thank you for this ROM, installed on SM-J600FN

64 bit rom? I know a8+ is 64 bit but just wanted to make sure. I'm fed up with stock 32 bit rom. I dont have better data plan. So please someone reply :crying:

MadhanMurali said:
64 bit rom? I know a8+ is 64 bit but just wanted to make sure. I'm fed up with stock 32 bit rom. I dont have better data plan. So please someone reply :crying:
Click to expand...
Click to collapse
The J6 can't run 64 bit unless Samsung makes it themselves

Thank you for reply

UI crashed
After installation UI is unresponsive..........sometimes it crashes too.....!! please help........!!!!!

[ROM][J600X] H-ROM A7 PORT [Pie][OneUI][64 bits]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
As per creator's request, links have been removed
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Just so you know guys, I am constantly trying to fix bugs on this. My porting skills are not very good when it comes to odexed software lol
So I hope to make this port better over time.

H-ROM updated to V2 which adds stability and a few features I had previously removed.
Also it fixed face unlock oh and now, secure folder works. You just need to flash this: Secure Folder patch
Please give thanks to the post for making this zip to fix Secure Folder in this ROM
Enjoy!

Fixed Smart View.
Thanks to @KassemSYR who gave me the final key... to add lines in build.prop

I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading

Kostas172 said:
I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading
Click to expand...
Click to collapse
Well, honestly I've never had problems with WiFi. I only had to include it in the thread because it was reported on the original H ROM.
I can tell you with confidence that my WiFi has worked perfect.
When using any type of linux, you can use Heimdall instead of Odin

Thank you dude!! im testing the rom now:
Bugs:
1. Battery Drain (or bad battery performance).
2. The Rom is slower/laggy in multitask.
Please upload the wallpapers and ringtones in a flashable files, are amazing!!

Thanks for make this rom!
Thanks for make this rom very much^^
But I wish you add Bixby Voice in this rom.
This rom especially has very few bugs, haha

Knox
Hi sir, I'm a H-ROM A7 PORT V2.0 rom user now.
I want to add knox to this rom. How I Can?

ShaDisNX255 said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
Google Drive
OneDrive
Old Version
V1.0:
Google Drive
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23
Click to expand...
Click to collapse
I am using v2
When I start calling someone the network disappeared but mobile data working fine only problem in calling
And I can't restore my stock rom
Plzz help
Finally it fixed....

You are no longer authorized to make a derivated post of my roms. Please, remove download links.

Please close this thread, thanks.

Thread closed.
Closed due to OP's request.
Camo.
XDA Moderation Team