Database Info

[ROM][STABLE][J600G]Revolution S9 ROM

Revolution ROM for J6 (2018)
It all starts here
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
DO NOT TAKE MY STUFF WITHOUT PERMISSION!
YOU WILL BE REPORTED BY DOING SO
Introducing, my very first direct S9 port!
So, you decided to buy this phone, huh? Maybe you had no choice, maybe you only saw "octa-core chip" and jumped all over it, or maybe you just assumed that you would just download ROMs from XDA to make this device better since all other devices contain ROMs on this forum by the truck loads.
Then you get to the sad realization that generally speaking, this phone is really bad and no developer would want to buy this 2018 device with a 2016 processor and barely any sensors lol
Well, I hope I can at least ease a bit of that pain with this ROM. I am no master developer, but at least I know my development a-b-c's... but just barely.
So, it is only fair to warn you the following (aside from that giant disclaimer at the beginning of the thread lol):
If you are expecting this device to run as smooth as an S9 phone, have the expectation to download this ROM to improve your battery life by 50% , are expecting this ROM to run Fortnite at the highest settings possible as an actual S9 would or even expect the Benchmark scores like Antutu to increase, THEN STOP! STAY IN STOCK ROM!
AS I STATED, I AM NO MASTER DEVELOPER, MY KNOWLEDGE ONLY EXTENDS TO FRAMEWORK EDITING, I HAVE NO KNOWLEDGE ON KERNEL TWEAKING
And even if a dev tweaked the kernel to run faster, I doubt any of the above would happen, lower your expectations you're not dealing with a high end device
OK, rant out of the way. Let's get started!
Supported variant: SM-J600G (I do not know if this will run on any other variant, if you decide to try please give me feedback so I can update post)
Features:
*S9 Firmware
*Edge panels
*Edge lighting
*Smart select
*GIF recording
*Smart stay
*S9 Multiwindow (Pop-up view action)
*Open notifications in multiwindow mode
*Smart capture
*Scroll capture
*Infinity wallpapers
*And I think for the most part, all the features that the J6 offers by default
*More to come, of course
ROM Info:
*Based on S9 firmware G960FXXS2BRJ6
*Deodexed
*Zipaligned
*Busybox
*Slightly debloated
*Rooted with Magisk
Bugs:
*Mobile Hotspot does not work
*Phone lags at the initial boot due to being rooted with Magisk. To fix this, you just have to reboot upon getting to welcome screen
*Resolution looks a bit blurry. To fix this, just go to Settings->Display Settings->Resolution and change resolution to WQHD+, apply and the change back to HD+ and apply. Then the bug is fixed.
*This is initial release, expect bugs other than these mentioned. Please report if you find more
*AOD: Does not work at the moment
*Currently does not work with 2 SIMs inserted [FIXED]: Thanks for tutorial to BlackMesa123 here and thanks to @corsicanu for discovery
Changelog:
*13/12/20108 V1.0*
Initial release
Download links:
Google Drive
More mirrors to come
Installation instructions
-Create full backup before trying
-Wipe system, data, cache and dalvik
-Install ZIP via TWRP
-Let it boot for aprox 20 minutes
-Once booted, select language in start up screen and reboot the phone
This is done to remove lag due to being rooted with Magisk
-Complete setup
-Enjoy
Special thanks!
@ananjaser1211 for sharing all his knowledge on S9 porting. Fixed a couple of major bugs because of his guidance. You are awesome, dude!
@Albe96 for all the help he gives me in general. I know I bother you too much and I appreciate your patience with me :highfive:
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@yash92duster For his thread and contributions to the Oreo modding scene. Check out this amazing thread: https://forum.xda-developers.com/android/general/guides-android-8-0-oreo-mods-thread-t3772017
@Grouxho For his tutorials and some MODs. I specially love the Free form from notification MOD he shared with us
@BlackMesa123 For his discoveries on RMM lock and his bypass zip. Read more about rmm here: https://forum.xda-developers.com/showpost.php?p=75360965
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
Revolution S9 ROM for J6, ROM for the Samsung Galaxy J6+
Contributors
ShaDisNX255
ROM OS Version: 8.x Oreo
Based On: Samsung Experience
Source Code:
https://github.com/Albe96XDA/j6lte
(Thanks Albe, you rock!)
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2018-12-13
Created 2018-12-14
Last Updated 2018-12-13

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Lol this is #3

Final reservation

Awesome work :good: glad we see more people interested in development. keep it up

J6 or j6+ ? And where could i get twrp ?

Amazing work bud, the ROM is truly awesome.

danicadanicadanica said:
J6 or j6+ ? And where could i get twrp ?
Click to expand...
Click to collapse
Normal J6, I've asked the thread to be moved

Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..

danicadanicadanica said:
Is SM-J600G and SM-J600F same? Because i saw a built twrp which is SM-J600F could u post the recovery you used..
Click to expand...
Click to collapse
It should be the same, but I can't guarantee it. An F user told me it runes fine

So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G

danicadanicadanica said:
So how did u make it work you are J600G right ? Im asking for a twrp you used so that im confident to try im also J600G
Click to expand...
Click to collapse
Here is TWRP: https://forum.xda-developers.com/galaxy-j/development/recovery-twrp-3-2-2-0-galaxy-j6-on6-t3819751

Ok thanks feedback soon

You're doing great job.Keep it up!

Thanks for this rom. Will try it. Just Got my done back after screen repair so rmm lock still active.

Shouldn't this be in the development section?

ashyx said:
Shouldn't this be in the development section?
Click to expand...
Click to collapse
Yes, yes it should (but I need to post kernel sources and stuffs and I'm struggling to do that since its just stock kernel, but I'll get that sorted soon to get it fixed

Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix

KRiST0F said:
Hope it comes one day with native black theme
I really appreciate your work.
Nice start, however I'm not port fn. More into other roms like valdius, tipsy, lineage, resurrection remix
Click to expand...
Click to collapse
I am the complete opposite
I like the Samsung stuffs

[ROM][OneUI][Pie][MAGISK][SM-J600G/F]Stock OneUI for J6

Stock OneUI Release for J6
So, a couple of days ago OneUI was released for the SM-J600F. I simply took the ROM and made it flashable via ZIP
This is JUST STOCK ONEUI """OFFICIAL""" for the J6, DO NOT EXPECT EXTRA FEATURES!
Also, I debloated it lol
BUT
I want to make something clear. If you have not read this and this allow me to summarize
Pie brings new locks to the table, something far worse than rmm lock. If you flash Pie officially, either via OTA or via Odin, these new locks will prevent you from rooting, as I understand it.
The workaround is to flash Pie but with Oreo BL.
BUT
We don't know how long that will keep working
Samsung can easily make Pie only boot with Pie BL.
So... for now... DO NOT UPLOAD YOUR BOOTLOADER TO PIE YET OR YOU WILL NOT BE ABLE TO ROOT OR FLASH CUSTOM BINARY ANYMORE!
And this is where this zip comes in handy!
This ZIP will not change your BL (it will keep your Oreo BL) and included is a kernel (Helios Pie kernel) that fixes small issues. Also, if anything were to go wrong, you still have TWRP to backup and restore, how awesome is that?
So, you have been warned!
Downloads:
Android File Host:
https://www.androidfilehost.com/?fid=1395089523397933484
Mega: https://mega.nz/#!5BEXVSgJ!I6ta7PQQFHFqF9b1i3QeE5pANf1lVmF_c87uS6p8vEI
OneDrive: https://1drv.ms/u/s!AjUnizekeauKhAHeYnt-lwr5YZDW
(I'll try to upload to GDrive and AFH soon, I promise)
Instructions:
-Create a backup (just in case)
-Wipe system and data
-Flash zip
-Reboot and wait 10 minutes
If after 10 minutes, it is still in logo, force a reboot (Hold VOL +, VOL - and POWER) and then the ROM will work
"Features":
-Official Pie!
-In theory, should not have major bugs
-Pre-rooted with Magisk
-Debloated
If you appreciate having Pie early (and rooted!) please consider a donation to ananjaser1211, who was kind enough to compile Helios Pie kernel without even having the device!!!
http://paypal.me/ananjaser1211
@ananjaser1211 for compiling Pie kernel for the J6... without even having the device! Amazing job!
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
XDA:DevDB Information
[STOCK][OneUI][9.0]Stock OneUI for J600 G/F, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, ananjaser1211
Source Code: [url]https://github.com/ananjaser1211/Helios_7870[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-04-03
Last Updated 2019-04-03

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Enjoy Pie

Yes its working

You should tell that vendor will be also replaced.

Downloading
Downloading...

nice work

Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.

MKashifSajjad said:
Nice work Sha! Working great. Battery is draining faster as compared to Ncx A8. Keep it up.
Click to expand...
Click to collapse
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?

Battery takes about 2 cycles to stabilize. My first testers and me did notice higher than normal drain but then reduced the drain a lot.

Aleko91 said:
battery drains faster then stock oreo rom ? do you find any other bug ? camera works good ? can you check please if camera is flickering while taking photo to computer monitor or tv ?
Click to expand...
Click to collapse
It's normal for any camera to flicker when taking photos of older tvs as far as I know

j6 plus :crying:
???

This is not the J6+ forum lol

Will it work for On6
J600G please reply

naviidgull said:
Will it work for On6
J600G please reply
Click to expand...
Click to collapse
Yeah, maybe lol. Backup before you try anything

Digital TV is working?

Links are not working anymore bro please bro new link

ShaDisNX255 said:
It's normal for any camera to flicker when taking photos of older tvs as far as I know
Click to expand...
Click to collapse
on stock oreo rom it's not flickering , but it flickers even on odex stock rom

[ROM][J600X] H-ROM A7 PORT [Pie][OneUI][64 bits]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
As per creator's request, links have been removed
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23

FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the ROM again
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] My phone isn't rooted
[A] This ROM has Magisk pre-packaged. If you do not see Magisk Manager, just download the latest version of it in xda
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice

Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group​

How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway

Just so you know guys, I am constantly trying to fix bugs on this. My porting skills are not very good when it comes to odexed software lol
So I hope to make this port better over time.

H-ROM updated to V2 which adds stability and a few features I had previously removed.
Also it fixed face unlock oh and now, secure folder works. You just need to flash this: Secure Folder patch
Please give thanks to the post for making this zip to fix Secure Folder in this ROM
Enjoy!

Fixed Smart View.
Thanks to @KassemSYR who gave me the final key... to add lines in build.prop

I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading

Kostas172 said:
I am looking forward to install this rom on my device but there are some things holding me back,specifically,how much unstable is the wifi?does it usually disconnect or something like that?or it does that not so usually?The second thing that's holding me back is that,my laptop has a corrupted hard drive,and because I am on vacation I cannot replace it at this time, but I can only run lubuntu (light ubuntu) on my laptop from a USB. So,if I actually want to flash this rom,as you may know Odin doesn't work on linux,is there any other way I could root my device and flash twrp? Thanks for reading
Click to expand...
Click to collapse
Well, honestly I've never had problems with WiFi. I only had to include it in the thread because it was reported on the original H ROM.
I can tell you with confidence that my WiFi has worked perfect.
When using any type of linux, you can use Heimdall instead of Odin

Thank you dude!! im testing the rom now:
Bugs:
1. Battery Drain (or bad battery performance).
2. The Rom is slower/laggy in multitask.
Please upload the wallpapers and ringtones in a flashable files, are amazing!!

Thanks for make this rom!
Thanks for make this rom very much^^
But I wish you add Bixby Voice in this rom.
This rom especially has very few bugs, haha

Knox
Hi sir, I'm a H-ROM A7 PORT V2.0 rom user now.
I want to add knox to this rom. How I Can?

ShaDisNX255 said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I don't authorize to nobody to use any of the files of this project. Make your own ported rom by yourself
FEATURES
J600X
Android Pie ported from A7 2018 (SM-A750FN) to A3 and then to J6 xD
One UI
Arm64 native
Clean, debloated, fast, stable
S10 CSC with additional features
Digital wellbeing
Call recording, screen recording
DTS enabled for speaker and BT
Bixby Routines
Bixby Vision
VoLTE supported
...
CHANGELOG
V2:
Added all the features from H ROM
This fixed a few bugs like face unlock
Patched to work with Secure Folder (download zip from here and please give thanks: Secure Folder Fix
Fixed Smart View
V1:
Release
KNOWN BUGS
GPS can be unstable sometimes. It gets solved rebooting device
Wifi can be unstable sometimes. It gets solved rebooting device
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
AOD doesn't work
Probably broken NFC
May have more bugs
DOWNLOAD
Google Drive
OneDrive
Old Version
V1.0:
Google Drive
FLASHING INSTRUCTIONS
Wipe system, data, dalvik&cache, cache
Flash rom zip
Reboot
Note: This has Helios 3.1 included to run 64bits. Also rooted with Magisk.
Do not flash available Pie kernels unless they specify that they can run 64bits.
SCREENSHOTS
https://imgur.com/a/GivggZd
SUPPORT
Telegram group
CREDITS
@Astrako, for infinite hours spent with this port
@Valera1978 for his treble logic, kernel commits and hard work with 7870
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@KassemSYR for helping us fix a few camera problems on this port. You rock!
@McFy for his general help and hard work with LOS
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
As quoted directly from Astrako:
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
Please visit his thread and give a thanks: Click Here
XDA:DevDB Information
H-ROM for J6, ROM for the Samsung Galaxy J
Contributors
ShaDisNX255, Astrako, ananjaser1211
Source Code: https://github.com/ananjaser1211/Helios_7870
ROM OS Version: 9.x Pie
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23
Click to expand...
Click to collapse
I am using v2
When I start calling someone the network disappeared but mobile data working fine only problem in calling
And I can't restore my stock rom
Plzz help
Finally it fixed....

You are no longer authorized to make a derivated post of my roms. Please, remove download links.

Please close this thread, thanks.

Thread closed.
Closed due to OP's request.
Camo.
XDA Moderation Team

[TREBLE][10.0][arm64] H-VENDOR V1.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-10-06

Reserved

Does ANDROID 11 ROMs work ?

Please link us to Latest Recovery for G610X

Unable to Set Screen Lock
Flashed the files according to the instructions, the vendor is amazing (thanks a lot) however when i try to set a screen lock i get "Screen Lock was already changed. Try again with the new screen lock." and my lock screen type automatically becomes swipe. I factory reset my phone again, as well as did everything from start since i thought i went somewhere wrong but i still get this error. Any help would be appreciated.
Im using Havoc-Os 3.6 (The 13 Jun build iirc) with pico gapps.

The speaker doesn't work. please fix the problem because everything works perfectly except this

Khione42 said:
The speaker doesn't work. please fix the problem because everything works perfectly except this
Click to expand...
Click to collapse
Hey @Astrako, I wanna address this issue as well... Firstly, I've been using your crDroid build from the day you posted it... and it's fabulous....everything works perfectly and flawlessly....no sound issues, nothing..... The screen on time and standby time has drastically improved.... A lots of thanks for this Gsi build... But when I tried other Android 10 arm64 A/B GSIs, using the H-vendor, all worked fine, except the sounds and let me clear that only the call volume is working , but the media, notification, and alarm sound doesn't work. The second issue is with the screen lock. Nothing other than swipe is allowed and gives an error "Screen lock was already changed" whenever I try to change it. Please tell how to fix it... Thanks in advance for your attention . I am looking for your reply.

Bug in vender (audio not working)
Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
OneDrive folder
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_...roid_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-06-16
Click to expand...
Click to collapse
Yesterday I try your mod vender. I'm happy to see better performance and NIGHT LIGHT in crdroid 6.9. Everything is going well but no audio in speakers Headset is working.Thanks

Found a fix for SM-J701X speaker not working
Hey, after thinkering for a couples hours, i found the problem with the speaker not working with this vendor on the SM-J701X. :victory::victory:
In the .zip archive the Mixer_Path.xml is missing from H\device\j7velte\vendor\etc\. The one already in H-VENDOR_V1.0.zip\vendor\etc\ has the speaker commented everywhere.
After adding it, reflashing gsi and the H-Vendor it's working.
I'll leave a link to the Mixer_Path.xml i used if you dont have it already.
See yall :highfive:
https://drive.google.com/file/d/1MFXANvkM83MI1BSmK57456G--HieDFOw/view

Hey there i have a problem with flashing gsis and gapps actually this is probably not the correct place to write this but anyway
I was trying to flash havoc os and i already have your repartitioner script but when i flash the gsi system partition goes to 1800 mbs leaving 26 mbs of free space and i cannot install gapps what should i do ?

Need more info
Aisenesia said:
Hey there i have a problem with flashing gsis and gapps actually this is probably not the correct place to write this but anyway
I was trying to flash havoc os and i already have your repartitioner script but when i flash the gsi system partition goes to 1800 mbs leaving 26 mbs of free space and i cannot install gapps what should i do ?
Click to expand...
Click to collapse
What is the phone model? You might be runnig out of space.
I'm currently running HavocOs 3.8 on my SM-J701M with this vendor and the fix i found for the speakers not working without any problems

Do we have a fix for the lockscreen? it gives an error "Screen lock was already changed". whenever i try to change the lockscreen to pin, password.

exoticpubis said:
What is the phone model? You might be runnig out of space.
I'm currently running HavocOs 3.8 on my SM-J701M with this vendor and the fix i found for the speakers not working without any problems
Click to expand...
Click to collapse
I have j701f (16g-2g) version and i actually have space at internal storage i will add screenshots later
---------- Post added at 04:58 PM ---------- Previous post was at 04:00 PM ----------
https://imgur.com/a/LcYJFKb
reply if you cannot see images so i can upload anywhere else

Hello.
[Refurbished Samsung A3 2017 / SM-A320FL / latest 8.0.0 stock ROM / security patch 2020.04 from device's updater]
Code:
a3y17lte:/ $ getprop ro.treble.enabled
false
So, it seems I need H-Vendor...
Those coming from stock Samsung firmware have to format the data partition
Click to expand...
Click to collapse
Am I understanding well ? I need to:
- flash a custom recovery.img (--no-reboot)
- format data partition,
- clean flash (full wipe) an arm64 A/B GSI.img (don't reboot),
- flash H-Vendor.zip,
- then reboot.
No more steps ? (I don't need gapps)
Thanks in advance.
P.S.: may I use first your repartitioner script ?

exoticpubis said:
Found a fix for SM-J701X speaker not working
Hey, after thinkering for a couples hours, i found the problem with the speaker not working with this vendor on the SM-J701X. :victory::victory:
In the .zip archive the Mixer_Path.xml is missing from H\device\j7velte\vendor\etc\. The one already in H-VENDOR_V1.0.zip\vendor\etc\ has the speaker commented everywhere.
After adding it, reflashing gsi and the H-Vendor it's working.
I'll leave a link to the Mixer_Path.xml i used if you dont have it already.
See yall :highfive:
mixer_paths.xml
drive.google.com
Click to expand...
Click to collapse
it works fine with this fix thanks a lot.please find a fix of screen lock

[ROM][J600X] H-ROM S20 PORT V2.0 [10.0][OneUI 2.1][64 bits][Treble]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects. You are only allowed to fix the bugs for your variant and I will post here.
FEATURES
OneUI 2.1 under Android 10, ported from the Samsung Galaxy S20 5G (SM-G981B)
All J600 variants should be supported
Arm64 with Treble support
Fully deodexed
H-KERNEL included. Built permissive and overclocked
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
S10 CSC with additional features (call recording, etc)
And many more!
COMMON KNOWN BUGS
Updating camera app from Samsung App Store will break it
Face unlock (most likely never will work on this port)
Camera on live drawing
Some 3rd camera apps like footej don't work
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 2.0 (14/07/2020)
More info in 2nd post
INSTALLATION
Installer will detect right variant and flash proper files
Vendor partition is required
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
Once set, go to screen settings, set fullhd resolution and set back hd
SCREENSHOTS
https://imgur.com/a/j7Pk3Rd
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM S20 PORT, ROM for the Samsung Galaxy J6
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-07-14
Created 2020-07-14
Last Updated 2020-07-15

H-ROM S20 PORT V2.0 (14/07/2020)
July security patch
Added some new camera modes thanks to @neel0210
Added bloat zip containing several Samsung apps for those with larger system partitions. Feel free to debloat it by yourself according your needs. It will get install by default when flashing the rom zip for the A3 and the J6
GoogleDrive folder
Mega folder
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.

mine too

Volte working

THANKS :good::good::good::good:

Thank you so much and thumbs up for this great work you did . ????????

Thanks For Your Hardwork...
and i want to tell a bug that camera is crashing and keep stopping

Thanks so much.....
Great work:laugh::good:
..... but ... I HAVE PROPLEM.....
I can't delete apps using link2sd .... is there any solutions .. ????? ...

Here I have listed three bugs I faced while using this rom, Hope the admin of this rom will improve this in H ROM 3.0 ...
1)
Volte is just for show in this rom , If you are using jio sim or any other sim that uses volte and you have to make or recieve calls , then don't download this rom .
What's the issue : Their is only volte icon but when you are going to call someone or recieve any calls using VOLTE then your network goes down and the call end suddenly .
I haven't faced this issue in stock ONE UI 2.0 , but only faced with this rom and other GSI's available for J6 or ON6 .
So if you want to call someone or have to receive others call using VOLTE then this rom is not for you.
You can still send or recieve messages or Use your mobile data and their is not Issues in it.
2)
The Camera app is crashing when you click on filters mode or sometimes randomly , otherwise no bugs in it yet.
3)
If you will compare the speed test of this with havoc or evolutionx gsi's then you will find that this rom is too much slower in comparison to them.
Summary of Bugs detected:
1) VOLTE is not working for calls in stock dialer app, I didn't tried it with "Jio call app"(India) which basically allows support of volte for phones without volte for jio sims.
2) Camera is crashing when you click on filters or sometimes randomly too.
3) This rom is very slow as compared to other gsi's .
4) Other kernals like kraken or vendors doesn't boot up your system (well that's not neccessary but I included it)
If the developer will fix Volte then I will continue using this rom , I left is majorly cause I can't call or recieve someone's call, cause of volte issue I flashed it back to stock rom.
Btw I use ON6 (J600GF), its basically Indian version of J6
Cheers

pra7eeks said:
Here I have listed three bugs I faced while using this rom, Hope the admin of this rom will improve this in H ROM 3.0 ...
1)
Volte is just for show in this rom , If you are using jio sim or any other sim that uses volte and you have to make or recieve calls , then don't download this rom .
What's the issue : Their is only volte icon but when you are going to call someone or recieve any calls using VOLTE then your network goes down and the call end suddenly .
I haven't faced this issue in stock ONE UI 2.0 , but only faced with this rom and other GSI's available for J6 or ON6 .
So if you want to call someone or have to receive others call using VOLTE then this rom is not for you.
You can still send or recieve messages or Use your mobile data and their is not Issues in it.
2)
The Camera app is crashing when you click on filters mode or sometimes randomly , otherwise no bugs in it yet.
3)
If you will compare the speed test of this with havoc or evolutionx gsi's then you will find that this rom is too much slower in comparison to them.
Summary of Bugs detected:
1) VOLTE is not working for calls in stock dialer app, I didn't tried it with "Jio call app"(India) which basically allows support of volte for phones without volte for jio sims.
2) Camera is crashing when you click on filters or sometimes randomly too.
3) This rom is very slow as compared to other gsi's .
4) Other kernals like kraken or vendors doesn't boot up your system (well that's not neccessary but I included it)
If the developer will fix Volte then I will continue using this rom , I left is majorly cause I can't call or recieve someone's call, cause of volte issue I flashed it back to stock rom.
Btw I use ON6 (J600GF), its basically Indian version of J6
Cheers
Click to expand...
Click to collapse
1st - This is not the way to report a bug to someone, if you want a bug fixed, provide logs and ask educately.
2nd - Camera works fine, doesn't crash and if it's crashing for you it's probably your fault that has done something wrong.
3rd - This rom is not a GSI, so shouldn't be compared with any kind of GSI, also it's not an AOSP ROM, this is an Oneui 2.1 port from s20 which is a powerful device and has an heavy system, the rom is good for what it's intended for. It's fast and stable and has plenty of feature.
Learn how to give feedback of stuffs, don't be rude, the dev is not doing that cuz he likes you or cuz he owns you something, he made the rom cuz he wanted, he's not being paid, so be edcated.

What about volte if it's s20 port so volte should work on this rom

If I wrote something rudely so sorry about that, but I was just sharing what issues I was facing in this rom compared to the other I have installed and I can't provide log for VOLTE issue as I don't know how to provide it , if you have VOLTE sim then you will maybe face the similar problem.
Also I created this account solely for this rom itself as I thought the VOLTE problem could be fixed by the dev if I told the issue.
Peace .

Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects. You are only allowed to fix the bugs for your variant and I will post here.
FEATURES
OneUI 2.1 under Android 10, ported from the Samsung Galaxy S20 5G (SM-G981B)
All J600 variants should be supported
Arm64 with Treble support
Fully deodexed
H-KERNEL included. Built permissive and overclocked
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
S10 CSC with additional features (call recording, etc)
And many more!
COMMON KNOWN BUGS
Updating camera app from Samsung App Store will break it
Face unlock (most likely never will work on this port)
Camera on live drawing
Some 3rd camera apps like footej don't work
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 2.0 (14/07/2020)
More info in 2nd post
INSTALLATION
Installer will detect right variant and flash proper files
Vendor partition is required
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
Once set, go to screen settings, set fullhd resolution and set back hd
SCREENSHOTS
https://imgur.com/a/j7Pk3Rd
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM S20 PORT, ROM for the Samsung Galaxy J6
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-07-14
Created 2020-07-14
Last Updated 2020-07-15
Click to expand...
Click to collapse
The H-Rom 1.0 on Samsung Galaxy J600-FN after flashing and reboot the phone just bootlops on Samsung mark btw the H-Rom 2.0 boots but after 30 minutes or bench with antutu simple the phone reboots itself. I'm gona to reinstall to see if this happen and if happens i'm gona to send the loggat.
Thanks to release! (sorry for my bad english and i like the s20 camera waterark :laugh: )

@Astrako First of all Congratulations! And Thanks a lot for releasing such a good ROM.
But Calling is broken on J6. Yes the issue is not VoLTE but Calling. I have tested calling on both VoLTE and 3G network.
If I am making a call to a person he/she gets the call but the call gets disconnected before that person answers. Also, the dialer screen shows that Aeroplane mode is on, though it's not.
If I am getting a call then there is no sound heard on either of the sides.
And I even replaced odm with csc but it didn't helped. And I even tested calls after replacing odm with csc on VoLTE and 3G network.
And is it possible to remove blur from the UI??

Developing Zeus said:
...............But Calling is broken on J6. Yes the issue is not VoLTE but Calling. I have tested calling on both VoLTE and 3G network.
If I am making a call to a person he/she gets the call but the call gets disconnected before that person answers.....................
Click to expand...
Click to collapse
Yes that was the issue I was talking about, hope the developer found a fix for that

I'm not in India to test or to make judgments or any prejudices about this beautiful work but the only thing I know I own a J600GF which works and responds very fine with this S20 OneUI 2.1 port works like a charm.
The thing I know since I changed to this custom ROM I feels free like a bird it unlocks many things for my carrier. Thanks to the @Astarko thank you so much ?????????

Z1ll4One said:
I'm not in India to test or to make judgments or any prejudices about this beautiful work but the only thing I know I own a J600GF which works and responds very fine with this S20 OneUI 2.1 port works like a charm.
The thing I know since I changed to this custom ROM I feels free like a bird it unlocks many things for my carrier. Thanks to the @Astarko thank you so much ??????
Click to expand...
Click to collapse
I have a question.
Then Does VoLTE work?

Hello! Does voice command not work on this ROM? For me Voice Match is greyed out, I can't enable it! I would like to use "Ok Google".

You should edit this rom once because...
Why "Kill itself and reboot" happens in my phone only if I Install s20 or a7 v4 rom, also j6q rom.
Most variants of j6 don't occur it, but some of variants of j6 happen it.
You may not be able to understand what "Kill itself and reboot" I'm talking about is.
but I wish you try to understand about this problem as long as you can.

Magisk canary link not working help