Related
Hi!
What is the most suitable case for protection when phone drop?
Definitely Case Mate
http://www.case-mate.com/Samsung-Ga...ung-Galaxy-S-T-Mobile-Vibrant-Tough-Cases.asp
victor79 said:
Definitely Case Mate
case-mate .com/Samsung-Galaxy-S-T-Mobile-Vibrant-Cases/Case-Mate-Samsung-Galaxy-S-T-Mobile-Vibrant-Tough-Cases.asp
Click to expand...
Click to collapse
Or this case is better? (otterbox)
otterbox .com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS,default,pd.html?dwvar_SAM4-GALXS_color=20&start=1&cgid=samsung-galaxy-s-cases
demandware. edgesuite .net/aaez_prd/on/demandware.static/Sites-otterbox_us-Site/Sites-masterCatalog_OtterBox/default/v1295635693828/pdfs/sam4-galxs-info.pdf
how do you think?
+1 for Case Mate, I'm using one and it is very solid and durable, not sure about the otterbox but the Tough Case of Case Mate have many good reviews. Only one down side of it is that switching in/out battery more difficult but I see that the thing I have to pay for the good protection
Case Mate rocks!
Even a Case Mate "Barely There" is good enough for a drop on a even surface. No contact with the screen and the frame if dropped. Happend to me very often.
Saves a lot of money: http://www.amazon.de/Silicon-Samsun...9MU6/ref=sr_1_2?ie=UTF8&qid=1295719519&sr=8-2
It looks a bit luxury at the backside, like juwels. It's glossy but not slippery at all. Very handy as the Galaxy without any case is extreme slippery. It doesn't collect any dust and the screen is protected by the overlapping flange at the front.
Doesn't look like an old truck tire like Case Mate but it's a quiet well protection as I experienced when dropping my Galaxy often enough in my workshop.
How are the Cheap silicon cases ?
In india we dont have Anycall or otter cases.Could only find Case-mate tough and barely there on ebay.in.
Superuser_x said:
How are the Cheap silicon cases ?
Click to expand...
Click to collapse
Mine fits absolutely satisfying. No spaces between phone and cover, but you can rip it off by one turn with the hand.
The only thing where you feel that it is cheap: there is a (very small) welding seam around as it's made of two halfs. You can use a razor blade to get rid of, very easy.
In india we dont have Anycall or otter cases.Could only find Case-mate tough and barely there on ebay.in.
Click to expand...
Click to collapse
Unfortunately...
http://shop.ebay.in/i.html?_nkw=(i9...ilicon*&_osacat=0&_trksid=p3286.c0.m270.l1313
Some others are available, but very soft. But better than a crashed phone.
Maybe you can try to order in US or China. But there is absolutely no warranty to receive it...
How is this one, let me know your comments on this please - amzer.co.in
(iam sorry i cant paste the exact link due to new user restrictions)
if u can browse thru this website and look for the- silicone jelly case for samsung galaxy.
Mentioned one of these?
http://www.amzer.co.in/Amzer-Silicone-Skin-Jelly-Case-Grey-P88766.htm
http://www.amzer.co.in/Amzer-Luxe-Argyle-Skin-Case-Clear-P88794.htm
It's round about 5 bucks, so worth a try. At my point of view they will fit like many others.
One thing I would care about - hopefully feeding the paranoia troll only: in Germany we have very strong investigations in materials. Most cheap plastic are somehow unhealthy. Certain substances (lets name it flexibilizer) are able to leave the plastics and join thru your skin and might be able to damage genome or chromosome set and might cause something like growing boobs where non have to be or what ever. Especially if you are holding that plastic lots of time in sweaty hands.
Kind of a rule: more soft -> more "unhealthy". Depends on material quality.
So, when playing around a long time e.g. while flashing and configure it at home: pull the cover of.
Could not help laughing on that " Growing Boobs" thing.
But on a serious note, well i think you are right as Ive heard about cancers arising from long use of cheap quality plastic.
But i think i will try this.Going for the Green one
Going for the Green one
Click to expand...
Click to collapse
Would be my choice too. Like the eye catcher same as luxury style.
Recommended fashion which meets that style...
http://www.burlington.de/de/men.html
*SCNR*
This might protect the phone from a small drop. But might create a small bulge in your pants (...not in that way).
http://www.easydevices.co.uk/products.asp?partno=OTTBOX26SAMGS&model=
stepsch said:
Mentioned one of these?
http://www.amzer.co.in/Amzer-Silicone-Skin-Jelly-Case-Grey-P88766.htm
http://www.amzer.co.in/Amzer-Luxe-Argyle-Skin-Case-Clear-P88794.htm
It's round about 5 bucks, so worth a try. At my point of view they will fit like many others.
One thing I would care about - hopefully feeding the paranoia troll only: in Germany we have very strong investigations in materials. Most cheap plastic are somehow unhealthy. Certain substances (lets name it flexibilizer) are able to leave the plastics and join thru your skin and might be able to damage genome or chromosome set and might cause something like growing boobs where non have to be or what ever. Especially if you are holding that plastic lots of time in sweaty hands.
Kind of a rule: more soft -> more "unhealthy". Depends on material quality.
So, when playing around a long time e.g. while flashing and configure it at home: pull the cover of.
Click to expand...
Click to collapse
You got it half right - the man boob thing actually happens, but that's not because it goes through your skin. The chemical used to soften plastic are structurally similar to estrogen, which is the hormone responsible for puberty development in females. Prolonged exposure to the chemical can sometimes induce side effects. But that's usually through the mouth instead of through the skin. Human skins are quite resistant against foreign chemicals.
I've read some tests about plastic grips at construction tools, same at childrens toys (similar tests at adult toys). There is clearly written: contact with skin is able to damage whatever.
However, I still prefer estrogen in women.
So, whenever I am home I pull the covers from the phone. (It's also much prettier without any additional cover.)
I am just thinking of a kind of self-adhesive lamination - maybe clear like glas - on the battery cover, so that the phone will be less slippery. That wouldn't make it more stable when hitting the ground, but it wouldn't slip so easy out of your hand.
Unfortunately the round desin of the housing at all isn't very safe to get a good grip. (That's much better at iPhone4.)
I've been looking to buy a CapDase Soft Jacket 2 Expose. (Kindly Google it, as I cannot post external links yet)
I'm yet to find a webshop that will ship it to the Netherlands. Anybody knows one?
Today i recieved my Amzer silicone gelly case.
Looks good, feels good and doesnt burns a hole in my pocket.It has a nice rough finish on the sides for a good grip.Also my SGS feels more sturdy to hold.
Otterbox just outed the commuter for galaxy s
looks better than the casemate toughcase
Definitely Case-mate Tough!!
...omg... you don't really want to pay 35 bucks for a piece recycled truck tyre...
Greetings to India, I like the fresh green. ...and none of the truck tyre fans will steal it.
I do not believe that all those 5 times-more-expensive-protectors are 5x better in use, not even more than 1,1x.
Save your money, buy some nice apk instead.
Btw: ... in a few month there will be a new phone available and it doesn't matter anymore if yours is scratched or not.
Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.
ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.
MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide
SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.
I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.
I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium
ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.
siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.
Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.
_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.
cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.
Describe here your case with Pics and videos. Pros e Cons.
Doubts about cases? Let's discuss together! Thanks everybody! :good:
Recently I bought those 3:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/132581076421
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183176796723
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/372276989136
When I received I'll update here. ?
Edit 01 ( 11/may/18)
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/132581076421
- The best out of those - Nilkin did a great jobe and follow the the back curves. Precision cuts. You need to hold nicely because its not so rubbery. Note 9
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183176796723
- Good case with a nice style. precisely cuts, follow the back curves. Note 7
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/372276989136
- Horrible - It has protection because its almost like covering your cellphone with a tire. Note 2
Have one of these. Seems like it would take the blow should the phone fall screen first on a completely flat surface. The corners are somewhat hollow which makes them a bit softer than the rest of the case. I guess it's around 1.3mm thick and sticks out 0.65mm above the screen. It seems to provide some extra grip but is not really comfortable to hold. It's cheap atleast.
Dinizbr said:
Describe here your case with Pics and videos. Pros e Cons.
Doubts about cases? Let's discuss together! Thanks everybody! :good:
Click to expand...
Click to collapse
I purchased the Roxfit Precision Slim Soft Touch Shell. If you like something slim that will provide some minor protection to the back and corners this is a great case. Everything lines up and it doesnt hinder any usage of the fingerprint scanner at all. Its pretty thin so like i said this will probably only prevent minor damage.
mattnathaniel12 said:
I purchased the Roxfit Precision Slim Soft Touch Shell. If you like something slim that will provide some minor protection to the back and corners this is a great case. Everything lines up and it doesnt hinder any usage of the fingerprint scanner at all. Its pretty thin so like i said this will probably only prevent minor damage.
Click to expand...
Click to collapse
that case seems very nice, and I like it doesn't cover all the buttons!
the clear and anti-scratch one seems even slimmer though? Maybe I could try that one..
and did you maybe get also the curved screen protector?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
cause I'm curious to know if they would perfectly fit together, or maybe they will conflict on the edges?
FcukBloat said:
that case seems very nice, and I like it doesn't cover all the buttons!
the clear and anti-scratch one seems even slimmer though? Maybe I could try that one..
and did you maybe get also the curved screen protector?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
cause I'm curious to know if they would perfectly fit together, or maybe they will conflict on the edges?
Click to expand...
Click to collapse
I did purchase those screen protectors as well. The problem with these is they do not sit perfectly on the edge of the curved part of the screen. Your left with a slightly raised edge that is going to accumulate grime and debris around the border of the screen protector. However it does fit with the slim case and the 2 do not conflict with each other in any way. That being said if your have noticed the screen sensitivity issue at all then your are REALLY going to notice it with this on. I find myself having to hit the same button 2 or more times especially if the part of the screen I am tapping is closer to the edge of the screen. I would only recommend getting this right now if your in desperate need of the protection it may offer. If not then I may hold off until Sony fixes whatever issue is going on with their screen sensitivity.
mattnathaniel12 said:
I did purchase those screen protectors as well. The problem with these is they do not sit perfectly on the edge of the curved part of the screen. Your left with a slightly raised edge that is going to accumulate grime and debris around the border of the screen protector. However it does fit with the slim case and the 2 do not conflict with each other in any way. That being said if your have noticed the screen sensitivity issue at all then your are REALLY going to notice it with this on. I find myself having to hit the same button 2 or more times especially if the part of the screen I am tapping is closer to the edge of the screen. I would only recommend getting this right now if your in desperate need of the protection it may offer. If not then I may hold off until Sony fixes whatever issue is going on with their screen sensitivity.
Click to expand...
Click to collapse
hi thanks for the answer. I already have glass protector applied, I got the version smaller than the front panel so it covers only the real screen actually, still it has the same problem on the sides coming a little apart and accumulating dust, so I wondered if the curved one would have been better. if it is not I'll stay with the one I have now, thank you!
about the sensitivity problem, I didn't try without the protector, as I applied it as soon as I received the phone, I can fill it sometimes especially when scrolling items, I have to put more pressure than usual, but it is not a so big problem for me atm.
Just ordered these 2 cases and set of screen protectors. Will update when they arrive.
I ordered the two manufactured by Nillkin (the hard plastic, and the flexible ones), I will report back when I get them.
I already have the one that imitates leather, and has a V letter on the back. It's pretty bad in my opinion, make the phone less comfortable, the fit is not great, and it doesn't add any protection to the screen (minimally raised borders). Wouldn't recommend it unless you want to go for the absolutely cheapest.
CaraMuuu said:
I ordered the two manufactured by Nillkin (the hard plastic, and the flexible ones), I will report back when I get them.
I already have the one that imitates leather, and has a V letter on the back. It's pretty bad in my opinion, make the phone less comfortable, the fit is not great, and it doesn't add any protection to the screen (minimally raised borders). Wouldn't recommend it unless you want to go for the absolutely cheapest.
Click to expand...
Click to collapse
didn't you return your xz2c because of the screen sensitivity problem? just curious
I did return it, but my device had also a dead pixel. So after I saw the same screen sensitivity issue in the Huawei p20 and p20 pro I started believing that this is an Oreo issue as was explained in some other thread... And I ordered another xz2c
So if Sony doesn't resolve the touch screen issue themselves, probably it will be solved by Google in the next major Android update.
It bugs me, but I can live with it, and I want to believe it will be resolved. Basically I don't see any other phone that will fulfill me in battery life + 2018 SoC + not huge size. My only alternative would be a S9 with lineage OS, but buying an expensive phone with the intention of voiding warranty on day 1 is not a good approach I think.
Probably the Xiaomi mi7 would be a good alternative, but we're months away from its release.
No phone is perfect, so I prefer something that fits my pocket and I don't have to charge in the middle of the day, even if it means a poor gaming experience.
CaraMuuu said:
I did return it, but my device had also a dead pixel. So after I saw the same screen sensitivity issue in the Huawei p20 and p20 pro I started believing that this is an Oreo issue as was explained in some other thread... And I ordered another xz2c
So if Sony doesn't resolve the touch screen issue themselves, probably it will be solved by Google in the next major Android update.
It bugs me, but I can live with it, and I want to believe it will be resolved. Basically I don't see any other phone that will fulfill me in battery life + 2018 SoC + not huge size. My only alternative would be a S9 with lineage OS, but buying an expensive phone with the intention of voiding warranty on day 1 is not a good approach I think.
Probably the Xiaomi mi7 would be a good alternative, but we're months away from its release.
No phone is perfect, so I prefer something that fits my pocket and I don't have to charge in the middle of the day, even if it means a poor gaming experience.
Click to expand...
Click to collapse
well said i agree all points and not to mention s9 users, treble or not, i really don't think will get a fully functioning los, with perfect cam quality like stock etc, or at least not immediately! plus s8/s9 are already too big for me, and TW is not an option at all. mi7 also will be bigger than this one.
yeah I'm following that thread and saw what you guys realized, I'm happy it is not a Sony problem so this is probably going to be sorted out.
I'm really enjoying this phone, not perfect of course but has many pros, and dimensions are wonderful.
will wait for your feedbacks about covers and glasses.. bye!
FcukBloat said:
well said i agree all points and not to mention s9 users, treble or not, i really don't think will get a fully functioning los, with perfect cam quality like stock etc, or at least not immediately! plus s8/s9 are already too big for me, and TW is not an option at all. mi7 also will be bigger than this one.
yeah I'm following that thread and saw what you guys realized, I'm happy it is not a Sony problem so this is probably going to be sorted out.
I'm really enjoying this phone, not perfect of course but has many pros, and dimensions are wonderful.
will wait for your feedbacks about covers and glasses.. bye!
Click to expand...
Click to collapse
I thought the same about the S8 and S9 at the beginning, but I ended getting a S8 last year and it's very comfortable in hand, despite the size.
I understand you have different preferences, I don't need my phone to be compacts, but I don't want to be huge. Let's say the S8/S9 is my limit. Something like a Oneplus, the bigger XZ2, etc. would be uncomfortable for me. Maybe I will buy a Mi7 later this year, but I doubt it.
Well the screen protectors were fail, they didn't grip around the curved screen edge at all. The Olixar case sux, it's very slippery and prone to finger prints. I do like the Kugi case, it's grippy and it feels stout and durable. The raised edges also will protect the screen well if u lay the phone screen down.
I got this one: https://www.amazon.com/Colorful-Ult...d=1525256695&sr=8-1&keywords=xz2+compact+case
Really happy with it, great case.
This is the case I got: http://a.co/4iwmOZU
I quite like it and just left a review with photos. I definitely recommend looking at my photos, as the actual product is a little different than the mock-ups. Particularly on the corners.
Belk Sony Xperia XZ2 Compact Case
AgentOrange96 said:
This is the case I got:...
I quite like it and just left a review with photos. I definitely recommend looking at my photos, as the actual product is a little different than the mock-ups. Particularly on the corners.
Click to expand...
Click to collapse
Does it have raised edges in order to protect the screen? If not, do you use a screen protector?
robmb said:
Does it have raised edges in order to protect the screen? If not, do you use a screen protector?
Click to expand...
Click to collapse
It does not. I plan to get a glass screen protector once a good one exists.
Olixar FlexiShield
I've tried a Olixar FlexiShield. It fits tight on the phone, creates an edge maybe 1mm above the screen, it's smooth and comfortable to touch and hold.
There's no extra padding in the corners and the buttons become difficult to operate.
for less than 10 €, i'am very satisfy
this one is not realy elegant but give a very good protection for 5€ FPI !
this one is elegant and thin as a 2nd skin
but don't give a big protection for 5€ FPI !
i baught those 2 on amazon.fr in the marketplace here :
https://www.amazon.fr/gp/product/B07CDCR2PK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
and here
https://www.amazon.fr/gp/product/B07CCM66R8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Well, let's see how this develops...
As for a case, I got these two for starters:
https://www.amazon.de/Spigen%C2%AE-Elastisch-Stylisch-Handyh%C3%BClle-Schutzh%C3%BClle-RA-Schwarz/dp/B07B9SKC5K/ref=sr_1_1?ie=UTF8&qid=1527018512&sr=8-1&keywords=motorola+g6+plus+h%C3%BClle+spigen&dpID=510FXckhR3L&preST=_SY300_QL70_&dpSrc=srch
https://www.amazon.de/iBetter-Shock...pID=51XML3FlA7L&preST=_SY300_QL70_&dpSrc=srch
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Hi @Howlbeck,
I don't recommend the first one... I have a similar one for my Moto G5+ and it makes the phone very big. It's pure plastic!
For the second case, it may be thinner. So if you purchase it, please comment about it.
Any idea for a good screen protector?
Regards.
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
RokCruz said:
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
Click to expand...
Click to collapse
Please, can you share real photos of it?
Thank you!
manos78 said:
Please, can you share real photos of it?
Thank you!
Click to expand...
Click to collapse
Sure! here you are:
I cant take a photo of my phone wearing it because i havent other device.
Same here - only difference: my one has "spigen" plus the logo imprinted. The other 2 pics are the IBetter.
https://imgur.com/a/MsSBz1U
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
When I'm at home or at stationary work, the case(s) comes off.
The one Motorola includes with the device is ok, but... Big but.
I do like soft, transparent cases - but they tend to fade to yellowish pretty quick, doesn't matter if you are smoking yourself or not.
As there is no soft transparent case available as of yet - the Spigen it is.
Howlbeck said:
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
Click to expand...
Click to collapse
Me too!
I'll continue searching for a very lighty case.
Thank you!
Can anyone suggest me a case that adds grip to the phone since the glass back makes it very slippery? Too bad dbrand's grip case is not available for the Moto g6 plus .
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
As for cases making the phone bigger - well
The G6+ already is big, so I don't really care about a few more mms as long as it protects the device properly. Spigen did a very good job in the past, so I tend to coming back.
Compared to our Nexus 6P (Huawei) - this is "smaller" overall, barely bigger (taller, mostly) than the old Nexus 5X (LG) but - between Mrs. and myself, one of us will be using it. For an entry/budget Project Fi phone priced at $199 + tax, free shipping, I am very pleased with how it feel, look & setting it up, waiting for the case to arrive (delayed in transit ... by a day)
This is what I ordered, found it on Amazon - not a major "brand" name but appeared to provide the extra protections that we usually look for, and should not be too bulky. Otherwise, it does feel slippery especially with one-handed mode and we are know, sooner or later, it will be dropped accidentally - a little extra help on the corners & edges won't hurt. If a better & nicer case come up, I don't have a problem spending more or having an extra one around.
https://www.amazon.com/gp/product/B07DCKVM5B/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Once I get that, will put up pictures & have a side-by-side with the N6P (and, most likely, before I ship out the N5X ... battery is starting to not hold its charge, taking advantage of the "generous" trade-in allowance valued at $95, not bad - net cost to get the G6 is something I can live with, i.e. minus NFC, no G.Pay)
Been using Supershieldz's Glass screen protector and pleased with it, got 2 of them, so always have a spare around, just in case - put it on easily this afternoon, almost got it perfectly but at 98.5% - missed 2 spots with tiny dust trapped, but, who's going to notice it when device is powered on - only notice it when screen is dark/blank or powered off. Here's what they look like now.
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
The other option is the "classic" glass:
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
manos78 said:
Hi, Regarding the screen protector, someone has used this "full screen" version? ... The other option is the "classic" glass ... I like to know the difference.
Click to expand...
Click to collapse
The first one has the cutoff around the earpiece, speaker & front camera openings, covered the front of the smartphone all around (and it's priced higher) ... should be precision cut - careful alignment & placement when installing is a must.
The second one is easier for them to produce with the simple cut out, and "could" leave some of the digitizer/screen area "less" protected ... installation is basically the same but a very slight misaligned placement should still be fine during the installation process. It's similar to the one that I just installed yesterday - with a protective bumper case over it, the odds of scratching or damaging the Gorilla glass is still fairly low. Plus, I make it a habit to always order an extra spare & set it aside, just in case - the old one that I used on the Nexus 5X has a lifetime & free replacement warranty, no questions asked - just proof of it being worn/damaged & they quickly mail a new one at no charge (worth paying a little more for those brands upfront).
On a side note, this Moto G6 ... is "cute" and slim, feel "small" in the hand but with the 5.7" widescreen ratio, is very nice for the price level - too slippery to use without a case when holding it (especially with the glass back.)
manos78 said:
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
Click to expand...
Click to collapse
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
My Amazon G6 case arrived, and it came also with a clip-on face plate for belt carry ... something that is "nice" but I dislike, the hardware/spring doesn't look solid & could break - won't be nice to drop this at a height of several feet, unlike using one of those bulky Otterbox. Not going to use it - I either carry mine in a pocket or otherwise, use a BDU-style canvas pouch (in black).
Here are pictures of the G6, it's in the middle, for comparison with the Nexus 6P (Huawei) and the (LG) Nexus 5X (without the same style protective case) "naked" on the right for comparison.
The HD glass protector do leave a little area around the front surface of the G6 without "coverage" - dusts & lints, dirts could collect around the rim of the case/frame, so a periodic cleaning will be necessary, see the 2 close-up pictures.
We also have the old Motorola Nexus 6 and that's "big" compared to these - the G6 is about the same size as my dual-sim Huawei Honor 5X which I use for travel - the Moto G6 is very comfortable & feel solid being held in one hand with the case, providing a non-slippery hold ... and, it slide right into my old canvas belt pouch for "rough" day-to-day carry outside.
ryancell said:
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
Click to expand...
Click to collapse
Thank you! I feel I'll purchase the full screen protector. :good:
manos78 said:
Thank you! I feel I'll purchase the full screen protector. :good:
Click to expand...
Click to collapse
Keep in mind the full ones only have the adhesive around the outer edges and can pop off easily if you don't have on a case that protects the edges. But at the cost, they last a long while in my experience and look great!
Howlbeck said:
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
Click to expand...
Click to collapse
Thank you for the info. In that case I'll wait until some intermedium solution will appear.
Regards.
I got the Poetic Karbon Shield, nice slim case, fits really good and adds a bit of grip on the sides. https://www.amazon.com/Poetic-Karbo...529368131&sr=8-4&keywords=moto+g6+poetic+case
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Click to expand...
Click to collapse
For every phone I buy a Spigen case. I also bought for Moto G6 and I was not disappointed.
Hi guys, I'm sure you've seen quite a few pictures of those accessories, so I thought I'd post here a few images from very close to some details so you can have a good idea of the finish, etc.
Also a small comparison with an official case (nylon one). I've ordered a skin for it, but it was on preorder and just started shipping today.
Sorry for the lint on some pictures, it does catch it ^^
As for my opinion (one more of those), well the case does feel real good in hand, the phone feels really safe in there. The buttons are real good (miles better than Rhinoshield bumper). Only thing is that the fingerprint scanner is deep and in a small window, so must get a little used to the feeling of really accurately put the finger in there. And is it grippy ? Is fine! a bit better than the official case but not by super much.
Prism is also good, easy to install. Biggest critic is how sharp the edges are (you can see on the pictures). If you don't use a case, you'll feel them and I'd be afraid to lift it by mistake, not sure how securely it sticks. The feeling is like glass, I was using the phone naked previously and no problem with that. Also, it does not affect the screen, I think ; some peops say it makes the screen cloudy, but I do not notice.
Worth the price ? Hmm those things are a rip off no matter what. But they are both good quality products, and the glass screen protector without a black border is a real step up ^^.
There you go!
Thanks for sharing! Would you recommend dropping $$$ on this combo?
silent_freak said:
Thanks for sharing! Would you recommend dropping $$$ on this combo?
Click to expand...
Click to collapse
Well, all in all, it is near 60 USD.
The case is good I think, feels good and will protect the phone that's for sure, so if you don't have anything like that, it is a good buy. I also have an official OP cover and the main difference is that the Dbrand case has raised edges.
The glass, while it is good, is not as ground breaking as I imagined (Dbrand's marketing team is good ^^). The plus is that it feels like glass and does not have a black border, is as fingerprints resistant as the bare glass or the official screen protector. The bad is that the glass as you can see on the pictures is really only on the screen and has sharp corners, so you feel it when doing gestures, unless you use a case (because then your finger does not slide from the farther edge of the phone, if you see what I mean).
So out of the two, I would say the actually real good product is the case.
The case looks too bulky to me. I prefer the slimmer ones like the official protective sandstone or the karbon bumper, which are really well made. But I guess it depends on the environment you're working in (etc) which affects the danger your phoneis in, in which case, if it's a place you can easily damage it, this type of case can save you good money on repairs. The prism looks really durable from what I've seen online and I believe you get 2 in the box if I'm not mistaken, so if that's true, that's a big plus over rhinoshield's overpriced 1x black bordered piece of crap that covers at least 1mm of screen on each side, forcing you to just take it off minutes after installation and breaking it in anger.
Anyway, thanks for giving us a look at dbrand's new products. Was really looking forward to seeing someone talk about that.
dragos281993 said:
The case looks too bulky to me. I prefer the slimmer ones like the [...] Was really looking forward to seeing someone talk about that.
Click to expand...
Click to collapse
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
kipue said:
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
Click to expand...
Click to collapse
I dropped my OP6 from approximately 2.5meters from the locomotive's door and the phone miraculously survived with the karbon case having one nick in the top right side corner and surprisingly that disappeared after a few days. Very impressive quality. I was also very lucky, I guess, considering the height the phone fell from. THEN I got the bumper case from Rhinoshield along with the garbage black bordered glass. I broke the glass in half after basically donating money to them because that glass was not worth the price, but that was that. I put their bumper on my phone and left it there for a few days. ****ty buttons, poor quality material and slippery too, like a hard plastic you find in those kitchen accessories, but whatever, I liked the alert slider one. Then one day I got in my car and the phone fell from my pocket on concrete (or asphalt) and because it happened right at the edge of the road, one hard little rock managed to touch the edge of the screen at impact and cracked the screen on the middle right side with the crack starting from the bottom and ending in a "C" shape 2 or 3 centimeters above. So it's still ok but the start of the crack can be felt at touch so that's a bummer.
And in the end I could've given the money to the old lady beggar at the corner of the street instead of giving it to Rhinoshield for 2 absolutely rubbish products they made such a big fuss about.
Never again I'll buy from them. Dbrand's products seem a bit different though especially that prism. I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
dragos281993 said:
I dropped my OP6 from approximately [...] . I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
Click to expand...
Click to collapse
Yeah, as usual those things are very often quite a leap of faith. We want to believe that the more expensive it is the better it will be but the truth is that it's probably the same or close to the same with a different packaging :angel:
But need a screen protector at least to maintain the resell value of the devices.
I'll say again, prism is a good one but not perfect (like none of them is).
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
ahagersr said:
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
Click to expand...
Click to collapse
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in there so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out of their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
kipue said:
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in the so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out if their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
Click to expand...
Click to collapse
Thank you very much for your time!
ahagersr said:
Thank you very much for your time!
Click to expand...
Click to collapse
Sure, no problem.
So here are a few more. The last one is to show how the phone screen does not touch a flat surface when it is put face down. It's blurry but you'll get the idea.
Also some lint, not fighting that anymore