Describe here your case with Pics and videos. Pros e Cons.
Doubts about cases? Let's discuss together! Thanks everybody! :good:
Recently I bought those 3:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/132581076421
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183176796723
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/372276989136
When I received I'll update here. ?
Edit 01 ( 11/may/18)
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/132581076421
- The best out of those - Nilkin did a great jobe and follow the the back curves. Precision cuts. You need to hold nicely because its not so rubbery. Note 9
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183176796723
- Good case with a nice style. precisely cuts, follow the back curves. Note 7
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/372276989136
- Horrible - It has protection because its almost like covering your cellphone with a tire. Note 2
Have one of these. Seems like it would take the blow should the phone fall screen first on a completely flat surface. The corners are somewhat hollow which makes them a bit softer than the rest of the case. I guess it's around 1.3mm thick and sticks out 0.65mm above the screen. It seems to provide some extra grip but is not really comfortable to hold. It's cheap atleast.
Dinizbr said:
Describe here your case with Pics and videos. Pros e Cons.
Doubts about cases? Let's discuss together! Thanks everybody! :good:
Click to expand...
Click to collapse
I purchased the Roxfit Precision Slim Soft Touch Shell. If you like something slim that will provide some minor protection to the back and corners this is a great case. Everything lines up and it doesnt hinder any usage of the fingerprint scanner at all. Its pretty thin so like i said this will probably only prevent minor damage.
mattnathaniel12 said:
I purchased the Roxfit Precision Slim Soft Touch Shell. If you like something slim that will provide some minor protection to the back and corners this is a great case. Everything lines up and it doesnt hinder any usage of the fingerprint scanner at all. Its pretty thin so like i said this will probably only prevent minor damage.
Click to expand...
Click to collapse
that case seems very nice, and I like it doesn't cover all the buttons!
the clear and anti-scratch one seems even slimmer though? Maybe I could try that one..
and did you maybe get also the curved screen protector?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
cause I'm curious to know if they would perfectly fit together, or maybe they will conflict on the edges?
FcukBloat said:
that case seems very nice, and I like it doesn't cover all the buttons!
the clear and anti-scratch one seems even slimmer though? Maybe I could try that one..
and did you maybe get also the curved screen protector?
https://www.roxfit.mobi/collections...ed-clear-tempered-glass?variant=2219880841228
cause I'm curious to know if they would perfectly fit together, or maybe they will conflict on the edges?
Click to expand...
Click to collapse
I did purchase those screen protectors as well. The problem with these is they do not sit perfectly on the edge of the curved part of the screen. Your left with a slightly raised edge that is going to accumulate grime and debris around the border of the screen protector. However it does fit with the slim case and the 2 do not conflict with each other in any way. That being said if your have noticed the screen sensitivity issue at all then your are REALLY going to notice it with this on. I find myself having to hit the same button 2 or more times especially if the part of the screen I am tapping is closer to the edge of the screen. I would only recommend getting this right now if your in desperate need of the protection it may offer. If not then I may hold off until Sony fixes whatever issue is going on with their screen sensitivity.
mattnathaniel12 said:
I did purchase those screen protectors as well. The problem with these is they do not sit perfectly on the edge of the curved part of the screen. Your left with a slightly raised edge that is going to accumulate grime and debris around the border of the screen protector. However it does fit with the slim case and the 2 do not conflict with each other in any way. That being said if your have noticed the screen sensitivity issue at all then your are REALLY going to notice it with this on. I find myself having to hit the same button 2 or more times especially if the part of the screen I am tapping is closer to the edge of the screen. I would only recommend getting this right now if your in desperate need of the protection it may offer. If not then I may hold off until Sony fixes whatever issue is going on with their screen sensitivity.
Click to expand...
Click to collapse
hi thanks for the answer. I already have glass protector applied, I got the version smaller than the front panel so it covers only the real screen actually, still it has the same problem on the sides coming a little apart and accumulating dust, so I wondered if the curved one would have been better. if it is not I'll stay with the one I have now, thank you!
about the sensitivity problem, I didn't try without the protector, as I applied it as soon as I received the phone, I can fill it sometimes especially when scrolling items, I have to put more pressure than usual, but it is not a so big problem for me atm.
Just ordered these 2 cases and set of screen protectors. Will update when they arrive.
I ordered the two manufactured by Nillkin (the hard plastic, and the flexible ones), I will report back when I get them.
I already have the one that imitates leather, and has a V letter on the back. It's pretty bad in my opinion, make the phone less comfortable, the fit is not great, and it doesn't add any protection to the screen (minimally raised borders). Wouldn't recommend it unless you want to go for the absolutely cheapest.
CaraMuuu said:
I ordered the two manufactured by Nillkin (the hard plastic, and the flexible ones), I will report back when I get them.
I already have the one that imitates leather, and has a V letter on the back. It's pretty bad in my opinion, make the phone less comfortable, the fit is not great, and it doesn't add any protection to the screen (minimally raised borders). Wouldn't recommend it unless you want to go for the absolutely cheapest.
Click to expand...
Click to collapse
didn't you return your xz2c because of the screen sensitivity problem? just curious
I did return it, but my device had also a dead pixel. So after I saw the same screen sensitivity issue in the Huawei p20 and p20 pro I started believing that this is an Oreo issue as was explained in some other thread... And I ordered another xz2c
So if Sony doesn't resolve the touch screen issue themselves, probably it will be solved by Google in the next major Android update.
It bugs me, but I can live with it, and I want to believe it will be resolved. Basically I don't see any other phone that will fulfill me in battery life + 2018 SoC + not huge size. My only alternative would be a S9 with lineage OS, but buying an expensive phone with the intention of voiding warranty on day 1 is not a good approach I think.
Probably the Xiaomi mi7 would be a good alternative, but we're months away from its release.
No phone is perfect, so I prefer something that fits my pocket and I don't have to charge in the middle of the day, even if it means a poor gaming experience.
CaraMuuu said:
I did return it, but my device had also a dead pixel. So after I saw the same screen sensitivity issue in the Huawei p20 and p20 pro I started believing that this is an Oreo issue as was explained in some other thread... And I ordered another xz2c
So if Sony doesn't resolve the touch screen issue themselves, probably it will be solved by Google in the next major Android update.
It bugs me, but I can live with it, and I want to believe it will be resolved. Basically I don't see any other phone that will fulfill me in battery life + 2018 SoC + not huge size. My only alternative would be a S9 with lineage OS, but buying an expensive phone with the intention of voiding warranty on day 1 is not a good approach I think.
Probably the Xiaomi mi7 would be a good alternative, but we're months away from its release.
No phone is perfect, so I prefer something that fits my pocket and I don't have to charge in the middle of the day, even if it means a poor gaming experience.
Click to expand...
Click to collapse
well said i agree all points and not to mention s9 users, treble or not, i really don't think will get a fully functioning los, with perfect cam quality like stock etc, or at least not immediately! plus s8/s9 are already too big for me, and TW is not an option at all. mi7 also will be bigger than this one.
yeah I'm following that thread and saw what you guys realized, I'm happy it is not a Sony problem so this is probably going to be sorted out.
I'm really enjoying this phone, not perfect of course but has many pros, and dimensions are wonderful.
will wait for your feedbacks about covers and glasses.. bye!
FcukBloat said:
well said i agree all points and not to mention s9 users, treble or not, i really don't think will get a fully functioning los, with perfect cam quality like stock etc, or at least not immediately! plus s8/s9 are already too big for me, and TW is not an option at all. mi7 also will be bigger than this one.
yeah I'm following that thread and saw what you guys realized, I'm happy it is not a Sony problem so this is probably going to be sorted out.
I'm really enjoying this phone, not perfect of course but has many pros, and dimensions are wonderful.
will wait for your feedbacks about covers and glasses.. bye!
Click to expand...
Click to collapse
I thought the same about the S8 and S9 at the beginning, but I ended getting a S8 last year and it's very comfortable in hand, despite the size.
I understand you have different preferences, I don't need my phone to be compacts, but I don't want to be huge. Let's say the S8/S9 is my limit. Something like a Oneplus, the bigger XZ2, etc. would be uncomfortable for me. Maybe I will buy a Mi7 later this year, but I doubt it.
Well the screen protectors were fail, they didn't grip around the curved screen edge at all. The Olixar case sux, it's very slippery and prone to finger prints. I do like the Kugi case, it's grippy and it feels stout and durable. The raised edges also will protect the screen well if u lay the phone screen down.
I got this one: https://www.amazon.com/Colorful-Ult...d=1525256695&sr=8-1&keywords=xz2+compact+case
Really happy with it, great case.
This is the case I got: http://a.co/4iwmOZU
I quite like it and just left a review with photos. I definitely recommend looking at my photos, as the actual product is a little different than the mock-ups. Particularly on the corners.
Belk Sony Xperia XZ2 Compact Case
AgentOrange96 said:
This is the case I got:...
I quite like it and just left a review with photos. I definitely recommend looking at my photos, as the actual product is a little different than the mock-ups. Particularly on the corners.
Click to expand...
Click to collapse
Does it have raised edges in order to protect the screen? If not, do you use a screen protector?
robmb said:
Does it have raised edges in order to protect the screen? If not, do you use a screen protector?
Click to expand...
Click to collapse
It does not. I plan to get a glass screen protector once a good one exists.
Olixar FlexiShield
I've tried a Olixar FlexiShield. It fits tight on the phone, creates an edge maybe 1mm above the screen, it's smooth and comfortable to touch and hold.
There's no extra padding in the corners and the buttons become difficult to operate.
for less than 10 €, i'am very satisfy
this one is not realy elegant but give a very good protection for 5€ FPI !
this one is elegant and thin as a 2nd skin
but don't give a big protection for 5€ FPI !
i baught those 2 on amazon.fr in the marketplace here :
https://www.amazon.fr/gp/product/B07CDCR2PK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
and here
https://www.amazon.fr/gp/product/B07CCM66R8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Related
I figured those of you who haven't decided yet, you may want some accessory recommendations.
Here is my case. It is perfect for this phone. Ignore the 1 bad review, they didn't even have this phone.
https://www.amazon.com/gp/product/B01IUS5GS4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Here is my screen protector. It is a 2 pack of 9H tempered glass for $8. There is about 1mm of exposed glass on each edge after installation, but my case covers those edges perfectly. The cutouts line up perfectly and has a Hydrophobic and Oleophobic screen coating. The screen is super smooth to the touch and installs easily without a single bubble.
https://www.amazon.com/gp/product/B01H3SI1TS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Those are the only accessories I've bought so far, maybe period as I can't think of anything else I could need. I have the 256GB so I won't need a MicroSD. Let me know if you have anything that may be better. I hope you are enjoying your ZenFone 3 Deluxe as much as I am.
Ordered the same case yesterday. Should get it next week... I'm glad you like it!
finale477 said:
Ordered the same case yesterday. Should get it next week... I'm glad you like it!
Click to expand...
Click to collapse
Let me know how u like it. I love mine
I ordered the silver variant of that case last week. Suprised at how well the back stays on there with as little room it has to snap on there. Got a second one coming in for my Special Edition (own the 820 and 821 model).
Anyways, it's a great case. Just wish Spigen will come out with a slimline model of their cases for the phones. Had theirs with the kickstand for my note 4 and it was about as slim as this one and worked well for the 2 years I had the phone lol
firepong said:
I ordered the silver variant of that case last week. Suprised at how well the back stays on there with as little room it has to snap on there. Got a second one coming in for my Special Edition (own the 820 and 821 model).
Anyways, it's a great case. Just wish Spigen will come out with a slimline model of their cases for the phones. Had theirs with the kickstand for my note 4 and it was about as slim as this one and worked well for the 2 years I had the phone lol
Click to expand...
Click to collapse
That backplate impressed me as well. It was a very nice implementation
https://www.amazon.com/HOMOSA-ZenFo...08250&sr=8-2&keywords=homosa+zenfone+3+deluxe
This view cover is +1
Built in stand. When they get the always on display back running it will be even better.
Blues-n-Blazin said:
Let me know how u like it. I love mine
Click to expand...
Click to collapse
So far it's pretty nice. However, I will say the back is slightly slippery. It has better grip than the phone itself, but not much better.
Other than that, a pretty decent slim case
+1
I actually bought both of them.
Blues-n-Blazin said:
Let me know how u like it. I love mine
Click to expand...
Click to collapse
Got the "all black one". And i'm quite satisfied with it pretty good looking but i have a remark to make the side buttons are a little bit too hard for my taste. Besides that great cover. Still waiting for the temperate glass.
Sent from my ASUS_Z016D using XDA-Developers mobile app
Paytocum said:
Got the "all black one". And i'm quite satisfied with it pretty good looking but i have a remark to make the side buttons are a little bit too hard for my taste. Besides that great cover. Still waiting for the temperate glass.
Click to expand...
Click to collapse
I suppose the buttons are open to subjective opinion. I think they are perfect as they stick out so they are easy to find. They take a little force which I like so they don't accidentally press but still easy enough to press without adjusting your grip on the phone. It only adds a tiny bit of stiffness to the buttons, but I could see how some would press effortless button presses. I am on the opposite side of that spectrum though
Perhaps its just a matter of me geting used to it. One thing is certain it made me easier to get finger print read correctly.. With out the cover i used to get loads of misreads and with it its all fine... Quite happy with the purchase.
Sent from my ASUS_Z016D using XDA-Developers mobile app
Yeah it forces you to hold your finger vertically. That is the one thing I don't like as I wish they would've made the sides of the fingerprint edging just as slanted as the bottom.
If you are having issues with the fingerprint sensor, when you train your finger, be sure to train it a bunch of different ways. Change up the position with each press. Heck, I presume you could even train your main finger twice as two different fingers. We only get to train 5 fingers though.
Well, let's see how this develops...
As for a case, I got these two for starters:
https://www.amazon.de/Spigen%C2%AE-Elastisch-Stylisch-Handyh%C3%BClle-Schutzh%C3%BClle-RA-Schwarz/dp/B07B9SKC5K/ref=sr_1_1?ie=UTF8&qid=1527018512&sr=8-1&keywords=motorola+g6+plus+h%C3%BClle+spigen&dpID=510FXckhR3L&preST=_SY300_QL70_&dpSrc=srch
https://www.amazon.de/iBetter-Shock...pID=51XML3FlA7L&preST=_SY300_QL70_&dpSrc=srch
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Hi @Howlbeck,
I don't recommend the first one... I have a similar one for my Moto G5+ and it makes the phone very big. It's pure plastic!
For the second case, it may be thinner. So if you purchase it, please comment about it.
Any idea for a good screen protector?
Regards.
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
RokCruz said:
i bought mine like the first one and its really thin but it can absorb some falls and protects camera .
Click to expand...
Click to collapse
Please, can you share real photos of it?
Thank you!
manos78 said:
Please, can you share real photos of it?
Thank you!
Click to expand...
Click to collapse
Sure! here you are:
I cant take a photo of my phone wearing it because i havent other device.
Same here - only difference: my one has "spigen" plus the logo imprinted. The other 2 pics are the IBetter.
https://imgur.com/a/MsSBz1U
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
When I'm at home or at stationary work, the case(s) comes off.
The one Motorola includes with the device is ok, but... Big but.
I do like soft, transparent cases - but they tend to fade to yellowish pretty quick, doesn't matter if you are smoking yourself or not.
As there is no soft transparent case available as of yet - the Spigen it is.
Howlbeck said:
To be honest, Manos:
I don't like cases at all, but I need them to give me some protection for my clumsyness... ;o)
Click to expand...
Click to collapse
Me too!
I'll continue searching for a very lighty case.
Thank you!
Can anyone suggest me a case that adds grip to the phone since the glass back makes it very slippery? Too bad dbrand's grip case is not available for the Moto g6 plus .
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
As for cases making the phone bigger - well
The G6+ already is big, so I don't really care about a few more mms as long as it protects the device properly. Spigen did a very good job in the past, so I tend to coming back.
Compared to our Nexus 6P (Huawei) - this is "smaller" overall, barely bigger (taller, mostly) than the old Nexus 5X (LG) but - between Mrs. and myself, one of us will be using it. For an entry/budget Project Fi phone priced at $199 + tax, free shipping, I am very pleased with how it feel, look & setting it up, waiting for the case to arrive (delayed in transit ... by a day)
This is what I ordered, found it on Amazon - not a major "brand" name but appeared to provide the extra protections that we usually look for, and should not be too bulky. Otherwise, it does feel slippery especially with one-handed mode and we are know, sooner or later, it will be dropped accidentally - a little extra help on the corners & edges won't hurt. If a better & nicer case come up, I don't have a problem spending more or having an extra one around.
https://www.amazon.com/gp/product/B07DCKVM5B/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Once I get that, will put up pictures & have a side-by-side with the N6P (and, most likely, before I ship out the N5X ... battery is starting to not hold its charge, taking advantage of the "generous" trade-in allowance valued at $95, not bad - net cost to get the G6 is something I can live with, i.e. minus NFC, no G.Pay)
Been using Supershieldz's Glass screen protector and pleased with it, got 2 of them, so always have a spare around, just in case - put it on easily this afternoon, almost got it perfectly but at 98.5% - missed 2 spots with tiny dust trapped, but, who's going to notice it when device is powered on - only notice it when screen is dark/blank or powered off. Here's what they look like now.
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
The other option is the "classic" glass:
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
manos78 said:
Hi, Regarding the screen protector, someone has used this "full screen" version? ... The other option is the "classic" glass ... I like to know the difference.
Click to expand...
Click to collapse
The first one has the cutoff around the earpiece, speaker & front camera openings, covered the front of the smartphone all around (and it's priced higher) ... should be precision cut - careful alignment & placement when installing is a must.
The second one is easier for them to produce with the simple cut out, and "could" leave some of the digitizer/screen area "less" protected ... installation is basically the same but a very slight misaligned placement should still be fine during the installation process. It's similar to the one that I just installed yesterday - with a protective bumper case over it, the odds of scratching or damaging the Gorilla glass is still fairly low. Plus, I make it a habit to always order an extra spare & set it aside, just in case - the old one that I used on the Nexus 5X has a lifetime & free replacement warranty, no questions asked - just proof of it being worn/damaged & they quickly mail a new one at no charge (worth paying a little more for those brands upfront).
On a side note, this Moto G6 ... is "cute" and slim, feel "small" in the hand but with the 5.7" widescreen ratio, is very nice for the price level - too slippery to use without a case when holding it (especially with the glass back.)
manos78 said:
Hi,
Regarding the screen protector, someone has used this "full screen" version?
https://www.amazon.co.uk/SDTEK-Moto...ns&keywords=SDTEK+Motorola+Moto+G6+Plus&psc=1
I like to know the difference.
Click to expand...
Click to collapse
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
My Amazon G6 case arrived, and it came also with a clip-on face plate for belt carry ... something that is "nice" but I dislike, the hardware/spring doesn't look solid & could break - won't be nice to drop this at a height of several feet, unlike using one of those bulky Otterbox. Not going to use it - I either carry mine in a pocket or otherwise, use a BDU-style canvas pouch (in black).
Here are pictures of the G6, it's in the middle, for comparison with the Nexus 6P (Huawei) and the (LG) Nexus 5X (without the same style protective case) "naked" on the right for comparison.
The HD glass protector do leave a little area around the front surface of the G6 without "coverage" - dusts & lints, dirts could collect around the rim of the case/frame, so a periodic cleaning will be necessary, see the 2 close-up pictures.
We also have the old Motorola Nexus 6 and that's "big" compared to these - the G6 is about the same size as my dual-sim Huawei Honor 5X which I use for travel - the Moto G6 is very comfortable & feel solid being held in one hand with the case, providing a non-slippery hold ... and, it slide right into my old canvas belt pouch for "rough" day-to-day carry outside.
ryancell said:
The full one has the black border on it, which also covers up the works motorola which I like...here is a pic of my wifes phone with the screen protector and an amazon case
Screen Protector x2 $6.98: https://www.ebay.com/itm/2X-ZenTech...ector-Guard-For-Motorola-Moto-G6/332666677282
Case $8.98 : https://www.amazon.com/gp/product/B07B4YHKTP
Click to expand...
Click to collapse
Thank you! I feel I'll purchase the full screen protector. :good:
manos78 said:
Thank you! I feel I'll purchase the full screen protector. :good:
Click to expand...
Click to collapse
Keep in mind the full ones only have the adhesive around the outer edges and can pop off easily if you don't have on a case that protects the edges. But at the cost, they last a long while in my experience and look great!
Howlbeck said:
As there are not many cases available right now, I think any case gives you a better grip currently. It's a matter of getting used to handling it without a case - as mentioned above, being inside I don't use cases - only while being outdoors as mentioned above.
Click to expand...
Click to collapse
Thank you for the info. In that case I'll wait until some intermedium solution will appear.
Regards.
I got the Poetic Karbon Shield, nice slim case, fits really good and adds a bit of grip on the sides. https://www.amazon.com/Poetic-Karbo...529368131&sr=8-4&keywords=moto+g6+poetic+case
I like the Spigen better, they do quality cases for a reasonable price. Look and feel is way better than the iBetter.
Click to expand...
Click to collapse
For every phone I buy a Spigen case. I also bought for Moto G6 and I was not disappointed.
Hi guys,
I figured i would chip in with my mini-review of Olixar ArmourDillo for our beloved OP6. I was looking for a heavy-duty protection as I often bring my OP6 to places where the risk of damaging is a bit higher (e.g. to a kids playground when going out with my daughter or warehouse where i work) or do things which are not exactly deemed as "safe" such as pulling the phone out of my backpack, which is still on my back, with my left hand, though i'm right handed, while cycling, on a rough terrain I was also looking for a case with a stand option but don't really fancy a flip case. Spiegen for some reason didn't include the kickstand in the OP6 rugged armor so I was actually not really left with many other options.
I ordered one last weekend directly from official Olixar web pages, and it arrived in about 3 working days. Price was around 17 EUR including delivery.
I immediately installed it and those are my findings:
PROs:
- very solid construction of the case.
- fantastic grip!
- very good protection of the camera (case overlaps with a VERY safe margin)
- all ports and alert slider are easily accessible and buttons work nicely.
- makes FP easier to use - the opening in the case kind of "guides" your finger to the FP scanner
- kickstand (some might see it as a CON, but not me).
- didnt have the chance to try (yet) but i think there is enough margin around the screen to make the case compatible with the official or other TGSPs (e.g. orzly) -> I am expecting Orzly TGSP delivered in the coming week so i will be able to test.
CONs:
- the case is not exactly a "snug fit". I could already tell it was "too easy" to put the base on and I was hoping that clicking the exoskeleton on would "lock" the phone in, but that's not exactly happening. Even with the exoskeleton on the case can be removed.
- the case overlap from the screen side could have been bigger. It overlaps by merely 1 mm, or perhaps even less (definitely less than the original case provided with the device). I worry that if the phone dropped on the corner-screen side than the slack I described in the first point would actually allow the screen/TGSP to touch the ground and crack.
IMAGES
CONCLUSION:
In general I am quite happy with the purchase and the case undoubtedly provides some serious protection to our phone...though i'd be much happier if the case was a little bit tighter.
So does the case overlap the screen protector (i assume that's what you mean by tgsp?)? Thanks for the review!
R0ttenB4ndit said:
So does the case overlap the screen protector (i assume that's what you mean by tgsp?)? Thanks for the review!
Click to expand...
Click to collapse
Sorry, haven't tested it yet. The orzly did arrive last week but so did my son so haven't really been able to get much done since
Jackill said:
Sorry, haven't tested it yet. The orzly did arrive last week but so did my son so haven't really been able to get much done since
Click to expand...
Click to collapse
Congrats, well that's one way to announce it
BTW, any do you also have the official tempered glass and any idea if it will support it?
reddead66 said:
Congrats, well that's one way to announce it
BTW, any do you also have the official tempered glass and any idea if it will support it?
Click to expand...
Click to collapse
Allright so i think the armourdillo is pretty much orzly tgsp compatible.
To answer your question, no, i dont, but i doubt the official tgsp is bigger than the one from orzly, and even if so then probably not by much. There is still enough margin so i think you should not have any problems with the official one either.
Good luck!
Jackill said:
Hi guys,
PROs:
- fantastic grip!
Click to expand...
Click to collapse
Thanks for the great review. I'm interested to hear more about the grip. I bought a UAG Plasma for my OP6, and even though it looks grippy, it's not. All the contoured bits are slippery, hard plastic. I dropped the phone a number of times in the couple of days I used the UAG.
I find the gel cases the best, but with cold, dry hands, even they get a bit slippery.
How does this case go with cold, dry hands? And how useful are the hard plastic contours on the back? And what about the base - where your pinky grips it when typing with one hand? Is that section soft TPU or hard plastic?
Thanks heaps in advance.
Cheers
Glenn
Hi guys, I'm sure you've seen quite a few pictures of those accessories, so I thought I'd post here a few images from very close to some details so you can have a good idea of the finish, etc.
Also a small comparison with an official case (nylon one). I've ordered a skin for it, but it was on preorder and just started shipping today.
Sorry for the lint on some pictures, it does catch it ^^
As for my opinion (one more of those), well the case does feel real good in hand, the phone feels really safe in there. The buttons are real good (miles better than Rhinoshield bumper). Only thing is that the fingerprint scanner is deep and in a small window, so must get a little used to the feeling of really accurately put the finger in there. And is it grippy ? Is fine! a bit better than the official case but not by super much.
Prism is also good, easy to install. Biggest critic is how sharp the edges are (you can see on the pictures). If you don't use a case, you'll feel them and I'd be afraid to lift it by mistake, not sure how securely it sticks. The feeling is like glass, I was using the phone naked previously and no problem with that. Also, it does not affect the screen, I think ; some peops say it makes the screen cloudy, but I do not notice.
Worth the price ? Hmm those things are a rip off no matter what. But they are both good quality products, and the glass screen protector without a black border is a real step up ^^.
There you go!
Thanks for sharing! Would you recommend dropping $$$ on this combo?
silent_freak said:
Thanks for sharing! Would you recommend dropping $$$ on this combo?
Click to expand...
Click to collapse
Well, all in all, it is near 60 USD.
The case is good I think, feels good and will protect the phone that's for sure, so if you don't have anything like that, it is a good buy. I also have an official OP cover and the main difference is that the Dbrand case has raised edges.
The glass, while it is good, is not as ground breaking as I imagined (Dbrand's marketing team is good ^^). The plus is that it feels like glass and does not have a black border, is as fingerprints resistant as the bare glass or the official screen protector. The bad is that the glass as you can see on the pictures is really only on the screen and has sharp corners, so you feel it when doing gestures, unless you use a case (because then your finger does not slide from the farther edge of the phone, if you see what I mean).
So out of the two, I would say the actually real good product is the case.
The case looks too bulky to me. I prefer the slimmer ones like the official protective sandstone or the karbon bumper, which are really well made. But I guess it depends on the environment you're working in (etc) which affects the danger your phoneis in, in which case, if it's a place you can easily damage it, this type of case can save you good money on repairs. The prism looks really durable from what I've seen online and I believe you get 2 in the box if I'm not mistaken, so if that's true, that's a big plus over rhinoshield's overpriced 1x black bordered piece of crap that covers at least 1mm of screen on each side, forcing you to just take it off minutes after installation and breaking it in anger.
Anyway, thanks for giving us a look at dbrand's new products. Was really looking forward to seeing someone talk about that.
dragos281993 said:
The case looks too bulky to me. I prefer the slimmer ones like the [...] Was really looking forward to seeing someone talk about that.
Click to expand...
Click to collapse
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
kipue said:
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
Click to expand...
Click to collapse
I dropped my OP6 from approximately 2.5meters from the locomotive's door and the phone miraculously survived with the karbon case having one nick in the top right side corner and surprisingly that disappeared after a few days. Very impressive quality. I was also very lucky, I guess, considering the height the phone fell from. THEN I got the bumper case from Rhinoshield along with the garbage black bordered glass. I broke the glass in half after basically donating money to them because that glass was not worth the price, but that was that. I put their bumper on my phone and left it there for a few days. ****ty buttons, poor quality material and slippery too, like a hard plastic you find in those kitchen accessories, but whatever, I liked the alert slider one. Then one day I got in my car and the phone fell from my pocket on concrete (or asphalt) and because it happened right at the edge of the road, one hard little rock managed to touch the edge of the screen at impact and cracked the screen on the middle right side with the crack starting from the bottom and ending in a "C" shape 2 or 3 centimeters above. So it's still ok but the start of the crack can be felt at touch so that's a bummer.
And in the end I could've given the money to the old lady beggar at the corner of the street instead of giving it to Rhinoshield for 2 absolutely rubbish products they made such a big fuss about.
Never again I'll buy from them. Dbrand's products seem a bit different though especially that prism. I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
dragos281993 said:
I dropped my OP6 from approximately [...] . I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
Click to expand...
Click to collapse
Yeah, as usual those things are very often quite a leap of faith. We want to believe that the more expensive it is the better it will be but the truth is that it's probably the same or close to the same with a different packaging :angel:
But need a screen protector at least to maintain the resell value of the devices.
I'll say again, prism is a good one but not perfect (like none of them is).
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
ahagersr said:
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
Click to expand...
Click to collapse
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in there so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out of their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
kipue said:
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in the so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out if their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
Click to expand...
Click to collapse
Thank you very much for your time!
ahagersr said:
Thank you very much for your time!
Click to expand...
Click to collapse
Sure, no problem.
So here are a few more. The last one is to show how the phone screen does not touch a flat surface when it is put face down. It's blurry but you'll get the idea.
Also some lint, not fighting that anymore
Can we make our own led effects ?
No, only with flip case.. thats crazy i brought this cover to make own animation/icons but led back cover has limited option and i dont understand why ;(
https://www.youtube.com/watch?v=QMC41y4sC_E
it seems to only work with Samsung only apps, maybe there are some XDA Devs that can work there way around it.
Hi,
I have mine for one week.
It's a really beautiful case which deserves the design of my S10. Not too slick but obviously more than a silicon case (not too much is acceptable). The feeling in hand is really well the hole for the power/volume/Bixby button is good for reach it easily.
The effect is a bonus (good in fact in a meeting your less attract by your phone due to the screen on the table).
So the price at beginning is too much (65$).
But now in Amazon you can have one for 35$ at this price is a very good deal !
The screen is protect by the case (the top and bottom are higher than 2 or 3 mm) but I don't know if in case of accidental drop if this case protect like a case in silicon (if you have the answer I'm interesting)
For now I used my S10 with this case in white and without screen protector and the feeling is so much much better (by far) than no official case and with SP.
Have a good day ?