Database Info

[Q] broken samsung 19000 after upgrade with keis

Hi,
I have a SGS I9000
After upgrading firmware by keis my phone goes into a mode that displays a mobile icon and a computer icon, between them there is a yellow sign with a ! Mark on it.
Nothing Works! Absolutely nothing!
I can not go into recovery mode by all methodes listed at sites
When I connect the phone to pc, nothing happens, no sound, absolutely nothing
When I try linux and taild -f /var/log/syslog did not get anything, meaning that the device is completely dead
please help

Try to enter in download mode and flashing a new firmware with odin
Sent from my GT-I9000 using XDA App

mf_417 said:
Hi,
I have a SGS I9000
After upgrading firmware by keis my phone goes into a mode that displays a mobile icon and a computer icon, between them there is a yellow sign with a ! Mark on it.
Nothing Works! Absolutely nothing!
I can not go into recovery mode by all methodes listed at sites
When I connect the phone to pc, nothing happens, no sound, absolutely nothing
When I try linux and taild -f /var/log/syslog did not get anything, meaning that the device is completely dead
please help
Click to expand...
Click to collapse
also look up the SGS forum. you will find plenty of help there.

@Gaarax992: The problem is that I can not enter downlaod mode! Even using this mood: i-thinkbig.blogspot.com/2010/11/modified-usb-with-resistor-to-force.html
@hanifh: what is the address of SGS Forum? I was unable to find it by search

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%

Samsung Galaxy Tab 2 10.1 SGH-I497 AT&T Bricked!

Hi all,
I own a Samsung Galaxy Tab 2 10.1 SGH-I497 (don't forget, its that specific model) that I recently tried to flash a Kernel through CWM recovery. Unfortunately, by the time I realized I shouldn't do such a thing, it was too late and I pressed the wrong button to select "go back". Now my device is stuck in what I would assume is a boot loop, without any screen output. However, I can turn the tab off and my computer will make the "disconnect" noise, alike when a flash drive/USB is unplugged. It also makes a "connect" noise when the tab turns itself back on less than 5 seconds later. Since I need an IMEI number for the KIES firmware reset, I cannot fix this with KIES, as I have no access to my android OS and it is not written on the back plate (for some ungodly reason, thanks Samsung!) I do have an SD card and a cable, and also have ODIN installed, so any suggestions would be great Honestly I don't think it can get any more F*cked right now, so if you guys have a clue on what to start with, shoot!
Also, if ANYONE has a way to find the IMEI number, It would be VERY, VERY appreciated!~
Thanks!
-Tekk

Anyone? I have found out it is connecting/disconnecting to my PC as a "Qualcomm HS-USB QDLoader 9008 (COM3)", so I am going to attempt to use a qualcomm flash tool.

BUMP!
TheTekkitBoss said:
Anyone? I have found out it is connecting/disconnecting to my PC as a "Qualcomm HS-USB QDLoader 9008 (COM3)", so I am going to attempt to use a qualcomm flash tool.
Click to expand...
Click to collapse
I'm having this exact issue. Did you figure it out? Anyone? :silly:

I don't have this specific model but have you tried flashing the factory image using odin? Boot into download mode and connect it to your PC then odin should display "Added!" Then locate your firmware package and flash it
Sent from my espresso3g using XDA Labs

erasmosis said:
I'm having this exact issue. Did you figure it out? Anyone? :silly:
Click to expand...
Click to collapse
flashing a custom kernel that is not meant for the same device, is fatal in most of the cases. still if your device can get into either recovery or download mode. praise the lord.
there is a detailed guide in my signature below, where I had tried explaining most of the parts.

billysam said:
flashing a custom kernel that is not meant for the same device, is fatal in most of the cases. still if your device can get into either recovery or download mode. praise the lord.
there is a detailed guide in my signature below, where I had tried explaining most of the parts.
Click to expand...
Click to collapse
Thats exactly it... no download mode, no recovery mode.

erasmosis said:
Thats exactly it... no download mode, no recovery mode.
Click to expand...
Click to collapse
If none of those two modes work, then I'm sorry because now you have a pretty expensive paperweight now Only a JTAG can save it now
Sent from my espresso3g using XDA Labs

Do you have adb installed? You could try spamming adb reboot recovery when it connects for that brief moment.
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app

Galaxy Tab 2 10.1 bricked

hi ,My Galaxy tab 2 10.1 P5100 (Android 4.0.4) have ''hard bricked'' Is there anything i can do that i could unbrick my tablet, it even doesn't show,the battery logo,when im charging, any help?

Have you tried charging it from a PC (in case charging block is dead) or another cord? Unless you were flashing something like a wrong bootloader, I don't know how you can brick these things.
Sent from my Galaxy Tab 2 using XDA Free mobile app

champ1919 said:
Have you tried charging it from a PC (in case charging block is dead) or another cord? Unless you were flashing something like a wrong bootloader, I don't know how you can brick these things.
Sent from my Galaxy Tab 2 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah i tried charging it from pc,still nothing,and i didn't flash it,just one day got back from work ,and the tablet didn't turn on

hi, i got myself showing "FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again" after I tried to fix my Samsung Galaxy tab II 10.1 that wasn't loading normally (only could go to "download mode" - now, not even this). Any help ?

hi, I also got the same "FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I try to plug into PC or regular charger, and it keep showing that same screen, and not the battery charging screen. cant go into download mode
its a flashing job went wrong >_<

hello
put your tablet in "loader mode"
connect to a pc with drivers
download cfautoroot for tab 2
unzip
use odin to install cfautoroot
regards

validatus said:
hello
put your tablet in "loader mode"
connect to a pc with drivers
download cfautoroot for tab 2
unzip
use odin to install cfautoroot
regards
Click to expand...
Click to collapse
what is this loader mode?
ive try all kind of combination, and it keep back to the same screen

balade said:
what is this loader mode?
ive try all kind of combination, and it keep back to the same screen
Click to expand...
Click to collapse
I think he means "odin/downloader mode" and the key combination for it is power+volume down.

Lightracer said:
I think he means "odin/downloader mode" and the key combination for it is power+volume down.
Click to expand...
Click to collapse
ive try all combination. the tab shutdown, but keep coming back to the same page.
i think im screwed

balade said:
ive try all combination. the tab shutdown, but keep coming back to the same page.
i think im screwed
Click to expand...
Click to collapse
I heard some members talking about how they unbricked their tab using OMAP Flasher. Maybe you could go try it?
EDIT: I think it's this one https://forum.xda-developers.com/showthread.php?t=2109044
another thread about OMAP Flasher even tho its not Tab 2: https://forum.xda-developers.com/galaxy-s2/development/guide-repair-totally-sleep-dead-boot-t1701471

Using Odin to fix bricked Samsung

Hi
I discovered my Samsung S III stuck on the Samsung screen. I have done all that was suggested but still no luck. It was suggested for me to use Odin to flash it with the original Android system. I read the instructions. I am very new to this. I have Kies my computer. When I plug my wifes phone in it sees it when I plug mine in it says installing drivers then fails. Even if I use Odin will the computer recognize my phone or is it a lost cause?
TIA

Crabb said:
Hi
I discovered my Samsung S III stuck on the Samsung screen. I have done all that was suggested but still no luck. It was suggested for me to use Odin to flash it with the original Android system. I read the instructions. I am very new to this. I have Kies my computer. When I plug my wifes phone in it sees it when I plug mine in it says installing drivers then fails. Even if I use Odin will the computer recognize my phone or is it a lost cause?
TIA
Click to expand...
Click to collapse
look up how to put your S3 into download mode and try Odin it should work if you have the current Odin and firmware files ready and correct USB drivers installed. I have a newer Samsung so I only use Odin, but I make sure it's in download mode first...
Sent from my SM-J327P using Tapatalk

I hope to help you
Crabb said:
Hi
I discovered my Samsung S III stuck on the Samsung screen. I have done all that was suggested but still no luck. It was suggested for me to use Odin to flash it with the original Android system. I read the instructions. I am very new to this. I have Kies my computer. When I plug my wifes phone in it sees it when I plug mine in it says installing drivers then fails. Even if I use Odin will the computer recognize my phone or is it a lost cause?
TIA
Click to expand...
Click to collapse
You must place your phone in download mode, simultaneously press the keys, volume up, home, and on, a screen with the android logo will appear, press the volume key up and enter download mode, then with the odin already open and the File of the original rom loaded, connect the usb cable to your phone and start downloading the rom to the phone .. :good:

The following links is a little Helper with a video on how to enter Download Mode on a Galaxy S3.
How to enter download mode on Samsung Galaxy S3 - Android Geeks
Good Luck!
***Please Note: As always, I welcome any member to help with further valuable information/clarification for any of my posts.
Sent via Communicator [d2vzw] from the Bridge of the U.S.S. Enterprise.