Galaxy Tab 2 10.1 bricked - Galaxy Tab 2 Q&A, Help & Troubleshooting

hi ,My Galaxy tab 2 10.1 P5100 (Android 4.0.4) have ''hard bricked'' Is there anything i can do that i could unbrick my tablet, it even doesn't show,the battery logo,when im charging, any help?

Have you tried charging it from a PC (in case charging block is dead) or another cord? Unless you were flashing something like a wrong bootloader, I don't know how you can brick these things.
Sent from my Galaxy Tab 2 using XDA Free mobile app

champ1919 said:
Have you tried charging it from a PC (in case charging block is dead) or another cord? Unless you were flashing something like a wrong bootloader, I don't know how you can brick these things.
Sent from my Galaxy Tab 2 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah i tried charging it from pc,still nothing,and i didn't flash it,just one day got back from work ,and the tablet didn't turn on

hi, i got myself showing "FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again" after I tried to fix my Samsung Galaxy tab II 10.1 that wasn't loading normally (only could go to "download mode" - now, not even this). Any help ?

hi, I also got the same "FIrmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
I try to plug into PC or regular charger, and it keep showing that same screen, and not the battery charging screen. cant go into download mode
its a flashing job went wrong >_<

hello
put your tablet in "loader mode"
connect to a pc with drivers
download cfautoroot for tab 2
unzip
use odin to install cfautoroot
regards

validatus said:
hello
put your tablet in "loader mode"
connect to a pc with drivers
download cfautoroot for tab 2
unzip
use odin to install cfautoroot
regards
Click to expand...
Click to collapse
what is this loader mode?
ive try all kind of combination, and it keep back to the same screen

balade said:
what is this loader mode?
ive try all kind of combination, and it keep back to the same screen
Click to expand...
Click to collapse
I think he means "odin/downloader mode" and the key combination for it is power+volume down.

Lightracer said:
I think he means "odin/downloader mode" and the key combination for it is power+volume down.
Click to expand...
Click to collapse
ive try all combination. the tab shutdown, but keep coming back to the same page.
i think im screwed

balade said:
ive try all combination. the tab shutdown, but keep coming back to the same page.
i think im screwed
Click to expand...
Click to collapse
I heard some members talking about how they unbricked their tab using OMAP Flasher. Maybe you could go try it?
EDIT: I think it's this one https://forum.xda-developers.com/showthread.php?t=2109044
another thread about OMAP Flasher even tho its not Tab 2: https://forum.xda-developers.com/galaxy-s2/development/guide-repair-totally-sleep-dead-boot-t1701471

Related

[Q]Galaxy Fit brick

Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
you must also come into recovery ...
if you cant flash it with odin 4.38 ... (in download-mode)
Than you make an data wipe/reset and wipe the dalvik...
And the phone is not bricked
n00b.androidDEV said:
you must also come into recovery ...
Click to expand...
Click to collapse
Can you please be more specific about this procedure? I'm not familiar with it.
Also a link to a tutorial would be greatly appreciated.
Thank you.
Can you come in recovery?
Press Power On + Home Button at once
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
viperasp said:
If i press home+power it shows the same logo as just trying to switch on. I cannot use the recovery menu.
Click to expand...
Click to collapse
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
have you used odin 1.7 or 1.8?
galaxy tab versions!!
bcoz in my galaxy tab it comes when
odin fails!
but i can solve that problem by flashing
(dbdata.tar)file!!! only in mySAMGUNG
GALAXY TAB 7 ,not tried 4 fit yet ,but
with galaxy TAB it works,
you just have to do is put(dbdata.tar)in
the first of the Odin blank row that is
(PDA)and connect Tab to pc and press
"Start"
only works for galaxy TAB ,dont knw
abt fit!!!!
but 100% work for Tab
u can try this on fit ,i dont knw wat will happen!
it may work!!
djozaa said:
cant we use odin_multi_downloader_v4.42 , beni.ops . why it must be odin 4.38 . are there any diferences
Click to expand...
Click to collapse
I use Odin 4.38, and use Beni v1.0.ops. When on the phone display a yellow triangle to download I connect the phone to the computer and when the port is detected I click on Start and wait until it's over, and that to me takes about 5 minutes. When it is almost square in the port is blue.
may b u can use unisoft unbrick....just google it out..
i wil provide u wid some more info if u can just tel me if u can enter in recovery mode nd by the way wat recovery it is...the stock i mean samsung 1's or the clockworkmod recovery.....
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
vijayanandssj4 said:
I too faced similar problm..did u flash in windows 7??coz i had the same prob on win 7 then flashed in xp n worked..u must be admin inorder to use odin hope it helps u
Click to expand...
Click to collapse
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
ZmisiS said:
To Odin work should be installed by the driver when the phone is connected to the computer. If you can not install the driver, Odin can not work, not port may be to open.
Click to expand...
Click to collapse
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
viperasp said:
Hello!
I got a small problem with a galaxy fit. It does power on and it shows a computer and a phone with an exclamation mark between them.
The only thing that is accessible is the download mode.
Now in download mode odin gets stuck at "mibib download.." and it just keeps counting the time.
Does anyone have a clue about what to do to get the phone working again?
P.S.
This is my friends phone and i wasn't with him when the accident happened, but i understood that he might have tried cu flash something and Odin got stuck and he pulled the cable.
Thank you.
Click to expand...
Click to collapse
if ur sure it wont work...it may be surely bricked ..l had bricked too..fortunately..my fone's warranty was active...i gave to the samsung centre....they changed my motherboard for free due to the warranty!
vijayanandssj4 said:
Hey bro by drivers do u mean samsung drivers???if yes then i do have samsung drivers in win 7 but still doesnt flash..win7 sucks it has more administration rights problems
Click to expand...
Click to collapse
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
ZmisiS said:
I have Windows 7 x64 and it is OK. On Odin you need go as Administrator. Drivers are installed automatically for me when I connect the phone and computer.
Click to expand...
Click to collapse
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
vijayanandssj4 said:
Hmm i too have an admin account on win7 x64 still odin doesn't work for me...
Click to expand...
Click to collapse
Right click on Odin ...
Turn off your cell phone, press 3 buttons at once: Menu + Power + Down Sound, wait until the phone display a yellow triangle appears to download, when it appears, connect your phone to your computer and you should get this:
Fit goes to bootloop after flashing stock firmware
ZmisiS said:
Try reinstalling the system. Press 3 buttons together. Power On + Home + volume Down. Prepare all the in Odin, connect phone with your PC, and Start in Odin.
Click to expand...
Click to collapse
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
goto recovery and wipe data & cache
remove bettery and switch it on again..
vijayf5 said:
I flashed stock firmware using odin and it successfully got completed but after rebooting it gets stuck on samsung logo and goes into bootloop. Can u help me to recover my fit....
Click to expand...
Click to collapse
Go in Recovery and it is enough to do the wipe data / recovery and reboot.
In Recovery you can go in a way that together press Home and Power buttons.

Galaxy Tab 2 hard brick

Hi guys,
i have Galaxy Tab 2 hard bricked. Can't turn it, nothing happens when trying to turn on or charge. Absolutely dead. It is dead after i've tried to enable swap on rooted device.
Please help me
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Please be more brief.
What did you do?
What did you try?
When plugged in to a computer, does it recognize it?
Does ODIN recognize it?
And if all fails and you are ready to go hardmode:
https://www.youtube.com/watch?v=Ami4TQH3cmc
jyeshta001 said:
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
suka_narkot said:
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
Click to expand...
Click to collapse
Hay bro..... will u tell me wants ur model....?
I wanna help u coz I know wats da pain of bricking a android.....
Sent from my GT-P3100 using xda premium
My Galaxy Tab 2 is P5100. It is rooted and works fine until i've tried to tweak swap via Swapper 2.
After i've installed this app i've tried to tweak my device and reboot it. so my tab is turned off and i can't enable it.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
jyeshta001 said:
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It can't be turned on in recovery/download mode so it is not visible in ODIN.
suka_narkot said:
My Galaxy Tab 2 is P5100.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Click to expand...
Click to collapse
????
Sent from my GT-P3100 using xda premium
what happens when you put it on charge ? probably battery is zero
Hello, I had same symptoms with my p5100 and I can't repair it. look here http://forum.xda-developers.com/showthread.php?t=1908949
jyeshta001 said:
????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
rraaka said:
what happens when you put it on charge ? probably battery is zero
Click to expand...
Click to collapse
No, battery was full-charged.
And i've plugged to charger and hold it with connected charger for 5 hours tonight - nothing, it is dead
riff box is the only way
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I don't see that it supports the ti omap4430.
Sent from my GT-P3113 using xda app-developers app
morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
merka_zh said:
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
Click to expand...
Click to collapse
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
suka_narkot said:
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
Click to expand...
Click to collapse
Unfortunately I'm sorry to say but when to get that omap message the tablet or phone IS in fact hard bricked and is not recoverable by anything here at xda. Samsung may be able to fix it but you are probably Better off just getting a new tab man because it'll cost just as much.
I know it's hard to hear that and it really sucks.
I almost bricked this tablet too and just had to give up on it for a while because it was so frustrating. I finally found the fix.
A couple months ago these guys were posting the wrong recoveries and root files and not labeling them correctly. So you have to be real careful with this stuff because s alot of them don't know what's going on.
Sent from my SGH-T889 using Tapatalk 2
adishakthi said:
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
Click to expand...
Click to collapse
1. authorised Samsung center proposed me to change board for 350$
2. i have contacts with unofficial master and he proposed me to replace internal memory card - from broken Tablet for 150$
But I've been looking for another solution and when came to service for replace internal flash memory (2 weeks ago) - they didn't have it.
So I've put it on the shelf and bought another Tablet - it is not Samsung, it is repairable device )))
Plz delete.....

[Q] Need Help: Unbrisk Samsung Infuse i997R

Hi,
I have got Samsung Infuse i997R, which I unofficially upgraded to JB 4.2 and then trying to downgrade, got bricked.
Samsung Kies/ODIN no more detects the phone. And its not switching to Download mode either.
I already used Volume Up+Down options as well as Jig solution. Though, display show me to connect to to Samsung Kies but its in vain.
Can anybody suggest me some way out here to bring life to my phone.
Thanks in advance.
Sachin
You need to give more info on whar happened start to finish. Be very specific. Youre being too vague
sent from my 1920 overclocked note 2 running jedi xp12
[Q] Need Help: Unbrisk Samsung Infuse i997R - Steps
markbencze said:
You need to give more info on whar happened start to finish. Be very specific. Youre being too vague
sent from my 1920 overclocked note 2 running jedi xp12
Click to expand...
Click to collapse
I know I have done some series of mistakes here while playing with my phone android but here is the sequence:
The phone was earlier bear GB 2.3.6 which I have upgraded to JB 4.2 directly using Clock mod & all (the steps available on most of site).
After upgrade I came to know that my IMIE number goes invalid; thus o more phone calls were working.
Followed by this, I tried downgrading it after which my phone got stucked in Download mode.
I accidentally pulled the USB cable post which it was not going into Download mode either and displays the warning message to connect to Samsung Kies.
But now, neither Samsung Kies nor ODIN recognizes it. I tries to get into Download mode again using Volume UP+Down combination as well as Jig but its not working for me either.
Thanks in advance for your help.
Sachin Dhir
Did u try updating\ reinstalling your drivers for odin to recognize your device. Ir maybe a different usb cord?
Sent from my SGH-I317M using Tapatalk 2
markbencze said:
Did u try updating\ reinstalling your drivers for odin to recognize your device. Ir maybe a different usb cord?
Sent from my SGH-I317M using Tapatalk 2
Click to expand...
Click to collapse
I already updated the drivers to recognise the device.
USB cord is same as provided with phone.
Thanks
Sachin
Good Bye Infuse 4G
SachinDhir said:
I already updated the drivers to recognise the device.
USB cord is same as provided with phone.
Thanks
Sachin
Click to expand...
Click to collapse
Had the same problem and seems there is no way out w/out being able to get into dl mode.
I was already on 4.2.2 rom beanstock & wanted to flash a different rom, did all the correct things in the correct order.
What I DIDN'T do was format the system option while in cwm and I have (I think) major incompatibility problems.
ok so if I could get into dl mode i'd could flash back to stock & start over. NOT without a dl screen.
from what I can see & read there is no way out of a hard brick like this.
yes, tried every possible combination of two button, battery in battery out, usb cable in out, different usb ports on computer.
not much help anywhere when in this problem mode.
looking for a cheap i997 & pull the main board & put it in this bricked phone & hopefully get into dl mode.

Bricked device, any chance of fixing ?

Galaxy Tab 2 10.1
So what happened, my tablet started going very slow after the latest update so i decided to downgrade it. Because i was a bit stupid at that time i installed a software for a different device . After that, my tablet kept on restarting and after it finally went on the desktop, the desktop was re sized and the touchscreen wasn't working. I tried a lot of things to fix it. I went into download mode and i tried installing the correct software but somehow my tablet crashed completely. Now I'm stuck on the "Firmware upgrade encountered an issue. lease select recovery mode in Kies & try again." I have no access to recovery or download mode and Kies doesn't recognize my device. It says connecting for 5 minutes and then it says connection failed. If i try to switch off the tablet it keeps on switching back on until battery dies with the same message showing up. Can anyone help me fix the tablet and have a full software thats working properly?
It's Emmc bricked and it's very very difficult to fix and I don't know how to do it.
While your tablet is showing the Firmware upgrade screen you should be able to connect it to Odin and flash a stock firmware.
If pc doesn't recognize uninstall Kies and install just drivers for tablet and try again.
Google can help you find and download the stock firmware.
Pp.
remus2244 said:
Galaxy Tab 2 10.1
So what happened, my tablet started going very slow after the latest update so i decided to downgrade it. Because i was a bit stupid at that time i installed a software for a different device . After that, my tablet kept on restarting and after it finally went on the desktop, the desktop was re sized and the touchscreen wasn't working. I tried a lot of things to fix it. I went into download mode and i tried installing the correct software but somehow my tablet crashed completely. Now I'm stuck on the "Firmware upgrade encountered an issue. lease select recovery mode in Kies & try again." I have no access to recovery or download mode and Kies doesn't recognize my device. It says connecting for 5 minutes and then it says connection failed. If i try to switch off the tablet it keeps on switching back on until battery dies with the same message showing up. Can anyone help me fix the tablet and have a full software thats working properly?
Click to expand...
Click to collapse
OMG.. u have same problem with me. i've been stuck like that in one week. i tried several ways to fix it but it same..back to "firmware upgrade........." in youtube so easy to fix it with odin or kies. but it so damn...i dont know why not work for me...
still waiting for someone help us
ibnufatkhu said:
OMG.. u have same problem with me. i've been stuck like that in one week. i tried several ways to fix it but it same..back to "firmware upgrade........." in youtube so easy to fix it with odin or kies. but it so damn...i dont know why not work for me...
still waiting for someone help us
Click to expand...
Click to collapse
That is scary, happened to me once, hold the power button for 10+ seconds. When the tab turns black, immediately hold the vol down button, hold it at the right time, if it fails try again, took me 5 or 6 times before I entered recovery. I just went to my guts, frankly I do not know what happened. Do you still have warrently? Can you send it to the JTAG service?
Somehow I could not enter download mode when I used any combination, so I relied only on the recovery to fix stuff. I would go to adb.
Perhaps this is a different condition, sorry. I am a flash junkie things work if you have cwm or twrp
Like @PanchoPlanet said already: it's the BSOD ("BlackScreen of Death") - DownloadMode is running in background automatically on that screen, you should be able to use odin to flash a rom.
Android-Andi said:
Like @PanchoPlanet said already: it's the BSOD ("BlackScreen of Death") - DownloadMode is running in background automatically on that screen, you should be able to use odin to flash a rom.
Click to expand...
Click to collapse
When this happened to me, I was having issues with Odin on Windows, but using Ubuntu and Heimdall, I was able to fix it.
PanchoPlanet said:
While your tablet is showing the Firmware upgrade screen you should be able to connect it to Odin and flash a stock firmware.
If pc doesn't recognize uninstall Kies and install just drivers for tablet and try again.
Google can help you find and download the stock firmware.
Pp.
Click to expand...
Click to collapse
I cant seem to find this stock firmware for the tab 2 wifi/lte (verizon) anywhere
There's no file out for Verizon Tab 2 - it's a completely different device (different hardware)
Send from OnePlus One using Tapatalk
---------- Post added at 09:03 PM ---------- Previous post was at 08:18 PM ----------
ChrisJobe said:
I cant seem to find this stock firmware for the tab 2 wifi/lte (verizon) anywhere
Click to expand...
Click to collapse
What have you done? Please mention every step you did and filename of the used files!
What's the model number? sgh-i497 AT&T ?
Send from OnePlus One using Tapatalk
Verizon sch-i915
I loaded the wrong TWRP on it and it hard-bricked
The TWRP load was for the 5100. I clicked the wrong button
ChrisJobe said:
Verizon sch-i915
I loaded the wrong TWRP on it and it hard-bricked
The TWRP load was for the 5100. I clicked the wrong button
Click to expand...
Click to collapse
Flashed the TWRP.tar.md5 using odin?
Send from OnePlus One using Tapatalk
PanchoPlanet said:
While your tablet is showing the Firmware upgrade screen you should be able to connect it to Odin and flash a stock firmware.
If pc doesn't recognize uninstall Kies and install just drivers for tablet and try again.
Google can help you find and download the stock firmware.
Pp.
Click to expand...
Click to collapse
Android-Andi said:
Flashed the TWRP.tar.md5 using odin?
Send from OnePlus One using Tapatalk
Click to expand...
Click to collapse
No I used the TWRP application. Never had an issue with it on my nexus devices. My tab 2 is sitting at tomy1986.nt's house waiting to be jtag'd but he doesnt have the stock image. I bought another tab 2 just like it but when it got to my house the person sold me a tab instead of a tab 2 as the ad said it was. So thus I am stuck.
http://forum.xda-developers.com/galaxy-tab-2/help/stock-image-please-t3056704
My next option is having the device shipped back and send it to http://www.mobiletechvideos.com/samsung-galaxy-tab-2-10-1/ and pay $75 for them to fix it. I know the device isnt worth it but its the principal of the matter of me breaking something and not being able to fix it. Thus I am offering $20 to anyone that can get me the files I need.
@ChrisJobe idk the application... Any link?
Send from OnePlus One using Tapatalk
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager&hl=en
Thats the application
http://jmzsoftware.com/2014/05/18/twrp-manager-4/
I have used this same application on all my devices and never had an issue until the tab2
If it's an app, i am sure uses real block name for flash.
On p51xx recovery sits on /dev/block/mmcblk0p6 - that's your broken block now.
You need to know, what's stored on /dev/block/mmcblk0p6 on your device...
After that you know what's needed (recovery too? Boot? Efs?)
I think you need to send it to a service center - i couldn't find anything for your tab: no recovery, no root... Simply nothing...
No root = no one can backup the block for you.
Send from OnePlus One using Tapatalk

Emergency please help!!

Hey guys please someone on here help my dumbass!
I smashed my galaxy note 5 out of anger today and really need help!
I rooted my phone with a custom kernel about a month ago and it constantly rebooted during calls etc.... I wanted to use Arter97's kernel with CWM but it will not boot into recovery.
My phone will not connect to the pc but will only charge! I have tried every option and no luck! I tried my other galaxy s6 and the drivers worked but not my note 5!
The root used to work before but I did a factory reset and not it says root is not properly installed!
My issue is phone will not connect to pc to use ODIN and CWM will not boot into recovery to install Arters Kernel for my Galaxy Note 5 SM-N920W8
Please help me before I cause some serious damage to anyone gets in my way in real life!
"One of the USB devices attached to this computer has malfunctioned , and windows does not recognize it. "
helloo....??? u smashed your device now deal is go to service center first it may be hardware issue.... or you have lost your device.
Sent from my SM-G7102 using Tapatalk
EMONESSboy said:
helloo....??? u smashed your device now deal is go to service center first it may be hardware issue.... or you have lost your device.
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
The device still works, just the glass back of the phone broke. The phone is not being recognized by the computer at all even before I smashed it.. I tried every method but it works on my s6 right away but not the note 5. It says my phone has no root now after I factory reset but my kernel is still the rooted version... 3.10.61 noble kernel v0.1
Did the root damage the hardware that it would connect to my pc?
Download the Samsung kies and do an emergency restore
Sent from my SM-G900T using Tapatalk
buyit1986 said:
Download the Samsung kies and do an emergency restore
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Not possible my phone does not connect to my computer and is now in a bootloop....!
Further help is needed please
S.Boutrous said:
"One of the USB devices attached to this computer has malfunctioned , and windows does not recognize it. "
Click to expand...
Click to collapse
Try a different cable and a different USB port when in download mode.
I had the same once, it's not the end of the world.
I've found the more generic the cord the more likely it will work especially if your port is bent
Sent from my SM-G900T using Tapatalk
Newyork! said:
Try a different cable and a different USB port when in download mode.
I had the same once, it's not the end of the world.
Click to expand...
Click to collapse
Tried multiple ports and multiple cords... Nothing.. at all phone is in a bootloop that wont clear either
I went to a few stores they said They have to change the motherboard for my note 5 SM n920w8... apparently that is why it changes with the usb on the pc but not data sync.... Im kinda lost on this because why would it do that!
Please help they are trying to charge me 240$...
To anyone who can help me fix this issue I will be more than happy to pay 130$
S.Boutrous said:
Tried multiple ports and multiple cords... Nothing.. at all phone is in a bootloop that wont clear either
Click to expand...
Click to collapse
You have two issues or one?
Phone is a bootloop Can you enter download mode?
Tried multiple ports and multiple cords... Tried a different pc?
Newyork! said:
You have two issues or one?
Phone is a bootloop Can you enter download mode?
Tried multiple ports and multiple cords... Tried a different pc?
Click to expand...
Click to collapse
It seems like I have multiple issues now, The phone is in a bootloop and will not pass Samsung Note 5 Logo, and the other problem is the device is not being detected on my computer.. Now it kinda seems worse because I am not even getting the error anymore it just won't connect.
I can still enter Odin download mode and Recovery mode yes.
I took it to the shop and they said they can fix itbut will cost around $240.00 to replace the motherboard so it can connect to the computer. If I can make it connect I can fix this whole issue..
I have tried multiple cords, multiple computers, disabled and enabled drivers, uninstalled and reinstalled drivers, updated drivers, every possible way you can think off with the computer.
S.Boutrous said:
I went to a few stores they said They have to change the motherboard for my note 5 SM n920w8... apparently that is why it changes with the usb on the pc but not data sync.... Im kinda lost on this because why would it do that!
Please help they are trying to charge me 240$...
To anyone who can help me fix this issue I will be more than happy to pay 130$
Click to expand...
Click to collapse
Just curious - How did you arrive at the $130 figure?
Just in case you don't know press power volume up and volume down and hold until download menu appears
Sent from my SM-G900T using Tapatalk
buyit1986 said:
Just in case you don't know press power volume up and volume down and hold until download menu appears
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
+
and what am I supposed to do with this download mode lol.. USB does not connect to the phone or else I would not have this post brother
BUMP

Categories

Resources