Anyone having issues with Warp Charge after updating to 9.5.7 or 9.5.8?
I only just noticed it but now that I think about it, I've not had Warp Charge for quite some time now. Rather than getting the lightning bolt icon, I only get the standard charging icon.
I have tried two Warp Charge compatible charger bricks and cables (the one from my 6T McLaren and the one from my 7 Pro) and both work fine on the 6T McLaren but not on the 7 Pro.
Seems this not just restricted to myself: https://forums.oneplus.com/threads/oneplus-7pro-warp-charge-not-working.1049579/
I was gonna try downgrade back to 9.5.5 to see if that fixes it, but when I tried to do that, the phone wouldn't boot! (thank god for Nandroid backups ).
EDIT
As discovered by 2ndwonder - this appears to be an issue with Magisk Canary builds. Rolling back to 19.3 Stable Magisk has fixed the issue.
Github issue link: https://github.com/topjohnwu/Magisk/issues/1649
I just noticed the same issue! Don't know for how long my warp charge is missing. I tried disabling magisk modules but nothing happens. My old dash charger from my 3t does not work as well. Also both chargers warp charge my 3t, so there is that. Using latest 9.5.8 with Skydragon kernel.
Noticed the same. It was one of the big reasons I bought this phone. Any luck?
See some people reports, that installing 9.5.8 manually via TWRP fixes WARP charge issue
In my case. I noticed that Warp charge was gone. Latest magisk canary zip disabled it. I flashed stable back again and Warp was back after reboot. Somehow my magisk changes itself to canary versions and kills warp
GM1917 on 9.5.8, Renovate Ice 3.0, with other magisk mods enabled,... No issues.
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Can please the people having this issue upload here a screenshot of their current magisk version? I am looking into this issue and I think I have a solution
2ndwonder said:
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Yes, magisk has itself changed on my device to download beta and canary versions. I don't know if it is a bug or expected. But flashing latest canary magisk (user just don't notice, you see an update and update) and after reboot Warp charge is disabled. I need to check this with more users having this issue. I can confirm with my device that going into magisk settings and changing update Chanel to stable, then installing 19.3 solves the issue. After reboot Warp is back. Took me almost a day to isolate the issue. But not any module fault apparently.
elmarian756 said:
Can please the people having this issue upload here a screenshot of their current magisk version? I am looking into this issue and I think I have a solution
Click to expand...
Click to collapse
I already solved it bro. Just install Magisk v19.3 (STABLE VERSION) from https://forum.xda-developers.com/app...mless-t3473445 and your problem is solved.
You should be able to warp charge now.
2ndwonder said:
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
2ndwonder said:
I already solved it bro. Just install Magisk v19.3 (STABLE VERSION) from https://forum.xda-developers.com/app...mless-t3473445 and your problem is solved.
You should be able to warp charge now.
Click to expand...
Click to collapse
So my theory was correct. Good! You can change directly magisk version going into magisk settings and switching update channel to stable. Then install directly and reboot. Hope this thread help others!
elmarian756 said:
Yes, magisk has itself changed on my device to download beta and canary versions. I don't know if it is a bug or expected. But flashing latest canary magisk (user just don't notice, you see an update and update) and after reboot Warp charge is disabled. I need to check this with more users having this issue. I can confirm with my device that going into magisk settings and changing update Chanel to stable, then installing 19.3 solves the issue. After reboot Warp is back. Took me almost a day to isolate the issue. But not any module fault apparently.
Click to expand...
Click to collapse
yeah, well at least we have a solution for now
---------- Post added at 06:00 PM ---------- Previous post was at 05:59 PM ----------
elmarian756 said:
So my theory was correct. Good! You can change directly magisk version going into magisk settings and switching update channel to stable. Then install directly and reboot. Hope this thread help others!
Click to expand...
Click to collapse
yes good job man.
Thank you this fixed it for me...uninstalled canary version (don't know how it switched as well)...rolled back to 19.3 and Warp charging is back. ?
2ndwonder said:
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Wow, very nice find! I flashed back to Stable and indeed, now Warp Charge is working!
Thanks a lot. Appears someone else raised an issue on Github - https://github.com/topjohnwu/Magisk/issues/1649 I'll see what logs they need and can update to Canary again to provide the logs they need
Yep, Stable works a treat!
I had the same issue. Idk how it switched to Canary. But once I flashed 19.3 stable. I have Warp charging back.
I've always been on stable. Uninstalled and reinstalled 19.3 but still no warp charge. Do i need to wipe something in Twrp?
hallo dare said:
I've always been on stable. Uninstalled and reinstalled 19.3 but still no warp charge. Do i need to wipe something in Twrp?
Click to expand...
Click to collapse
You should try first factory reset, and flashing latest OOS stock with no magisk or Anything else installed and check if warp works there. If it doesn' it means that warp is not working with stock boot img and rom completely unaltered. Which probably means dirty usb port or faulty cable/ charger / motherboard. If it does work, then check flashing what breaks warp. Most users reported magisk latest canary version.
Most likely after a clean flash it will work fine.
Working for me. 9.5.8
I can confirm that my cable got mixed up with my wife's oneplus 6 cable and that was my issue. As soon as I swapped back all was good again. I tried the OP6 cable just to be sure and right enough, it would not warp charge.
Related
Hey Guys, can someone tell me what Magisk version works and does not result in a bootloop or has other negative effects? The last time I used Magisk I had problems with 15.x, are all issues are now fixed or are there still some remaining?
Lukke2804 said:
Hey Guys, can someone tell me what Magisk version works and does not result in a bootloop or has other negative effects? The last time I used Magisk I had problems with 15.x, are all issues are now fixed or are there still some remaining?
Click to expand...
Click to collapse
I am using v15. 3 without any problems..
Magisk hide is having some problem with fingerprint recognition.. Some times when magisk hide is on finger print wont work. Its a problem with all the magisk versions i tried . So i turned it off.
Latest version works for me, although it doesn't pass the Safety net checks. Therefore some finance programs may not work, but root and modules work fine.
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
GAPPS VERSIONS
https://www.androidfilehost.com/?fid=674106145207484591 v.02
https://www.androidfilehost.com/?fid=674106145207484438 v.01
NO GAPPS
https://www.androidfilehost.com/?fid=890278863836283078
Installation
fastboot flash system_a system-arm64-ab.img
or if you want flash no gapps version
fastboot flash system_a system-arm64-nogapps.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
raimondomartire said:
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
https://www.androidfilehost.com/?fid=674106145207484438
Installation
fastboot flash system_a system-arm64-ab.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
Click to expand...
Click to collapse
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
el4nimal said:
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
Click to expand...
Click to collapse
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
raimondomartire said:
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
Click to expand...
Click to collapse
Is there any file I can modify in order to change it? I just want to set my display to 120hz
el4nimal said:
Is there any file I can modify in order to change it? I just want to set my display to 120hz
Click to expand...
Click to collapse
Your display on all treble roms is always on 120 Hz. You can't switch to 60 or 90. So I must add an option on settings like stock rom
Thanks a lot for your work in putting this together!
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
BakaSenpai said:
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
Click to expand...
Click to collapse
On this rom you can install magisk manager or, better for me, install in twrp magisk 11.4 zip file
I'm uploading now two new builds. RR sources on this project give same media encoder problems. Now I don't find errors
New builds with GApps
https://www.androidfilehost.com/?fid=818070582850511202
Without Gapps
https://www.androidfilehost.com/?fid=962187416754478323
Does this have any call blocking that uses a wildcard and does this have protected apps feature?
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
If You have installed magisk flash Google framework module and in this way you'll solve all problems. For no gapps ver i'll look inside
In 10 minutes from now 2 new builds:
changelogs
- new su daemon
- I hope to solve playstore hang
GAPPS
https://www.androidfilehost.com/?fid=674106145207484591
NO Gapps
https://www.androidfilehost.com/?fid=890278863836283078
raimondomartire, I appreciate your help! I wanted to let you know that for some reason my Bluetooth microphone doesn't work. When I am on a call it only goes through speakers, even if I toggle handset\bluetooth, and the volume doesn't do anything. I had to completely disconnect for it to go through handset. Any thoughts?
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
EDIT: It may of been an issue with the the beta Oreo firmware. I updated to the release Oreo firmware and all seems good so far. I had one hard crash during the setup process but that's it.
EDIT 2: The hard crash issue does appear to still be there, but happens far less frequently. It'll crash usually once a day and sometimes it'll crash and get stuck in download mode.
EDIT 3: The crashing issues seems to be the same as before. I've had it crash 7 or 8 times today.
ThatGuy94 said:
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
Click to expand...
Click to collapse
Mine hasn't done that. I'm running v02.
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
That's a known issue. Easiest way is to either shutdown instead of reboot or connect to pc and use fastboot set_active a
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
Thankfully NO! Don't know what I usually mess up but this rom is doing fine. I do believe it has something to do with how you install. Try doing everything with fastboot, avoid using twrp. Also power off and reboot will both get you stuck in download mode. I will not do either if I am not by a PC to fix it. I also have my old one + one with me to put my sim in if needed.
BakaSenpai said:
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
Click to expand...
Click to collapse
If you have that issue, go to settings and force stop the Play Store. Once you reopen it, it should begin to download your apps like normal.
OP6 8GB/ 256Gb Avengers Edition with OOS 9.0.2 build A6000_22_181026 rooted
Since a few days strange behavior:
I load the device over night.in the morning the device is stuck in the boot loader screen.only way to get out is too long press power and then restart.
I have not changed settings after last update.anyone an idea?
i guess you mean charging?
whizeguy said:
i guess you mean charging?
Click to expand...
Click to collapse
Sure, charging
ihobahobby said:
OP6 8GB/ 256Gb Avengers Edition with OOS 9.0.2 build A6000_22_181026 rooted
Since a few days strange behavior:
I load the device over night.in the morning the device is stuck in the boot loader screen.only way to get out is too long press power and then restart.
I have not changed settings after last update.anyone an idea?
Click to expand...
Click to collapse
its in 9.0.2 and OB6, a bug that only occures on custom kernels. OB7 however fixed the bug
byReqz said:
its in 9.0.2 and OB6, a bug that only occures on custom kernels. OB7 however fixed the bug
Click to expand...
Click to collapse
Isn't it a magisk issue?
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
ihobahobby said:
OP6 8GB/ 256Gb Avengers Edition with OOS 9.0.2 build A6000_22_181026 rooted
Since a few days strange behavior:
I load the device over night.in the morning the device is stuck in the boot loader screen.only way to get out is too long press power and then restart.
I have not changed settings after last update.anyone an idea?
Click to expand...
Click to collapse
It's a know magisk issue, while charging with your phone off it will boot to the bootloader screen. You will have to wait for an update.
yldlj said:
Isn't it a magisk issue?
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
It's a know magisk issue, while charging with your phone off it will boot to the bootloader screen. You will have to wait for an update.
Click to expand...
Click to collapse
Could be a ROM issue, I'm rooted under stock and i have yet to see this happen under 9.0.2.
Flashed back to OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9 official latest OTA and the issue remains.
My kernel is: 4.9.106-perf+#1FriOct26 00:05:17 CST 2018. And which kernel woud you advise to use?
Hey guys I found a build of android 10 and it's stable for WHYRED only bug I found is night mod .
https://sourceforge.net/projects/sh...om-10.0-whyred-OFFICIAL-20190917.zip/download
I am note developer of this rom so don't ask stupid questions XD
Only kernel work on android 10 is pure CAF x11
Flash magisk 19.4 after flash ROM . Otherwise your phone going too boot loop.
Have good days with it ?
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Bruh.
Hardly roms are being out and you want a stable one
Wait for another 2 months for a good one to be out!
This Post was sent from a Script by @baalajimaestro
0veR said:
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
Click to expand...
Click to collapse
Tell me the bugs ? I didn't face any one . Just volte didn't work for me and ROM have good speed .
shea83 said:
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
Click to expand...
Click to collapse
I didn't face any reboot . I have note 5 ai global
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
How did you enable volte in this rom ? My operator have volte but not working !
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
Link please?
harigavara said:
Link please?
Click to expand...
Click to collapse
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
No need gapps?
Installation instructions please?
ali.damiri said:
How did you enable volte in this rom ? My operator have volte but not working !
Click to expand...
Click to collapse
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
harigavara said:
No need gapps?
Installation instructions please?
Click to expand...
Click to collapse
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
Thank you. Bluetooth is working?
Did you see any bugs till?
xell75 said:
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
Click to expand...
Click to collapse
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
The only bug I have found for 2 days of usage is that night mode is not working
I had bootloop with that rom. I'm gonna try installing OP's rom and then updating
harigavara said:
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
Click to expand...
Click to collapse
Is your storage encrypted?
The rom is very smooth. Using for about 12 hours and no problems. It's like a pixel with sd card slot.
xell75 said:
Is your storage encrypted?
Click to expand...
Click to collapse
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
harigavara said:
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
Click to expand...
Click to collapse
You have to format data (not just wipe) to delete encryption, this will of course wipe your internal storage, so backup it id needed. Then it should boot.
i just updated to latest 10.5.7 Global version via OTA, and before rebooting installed magisk to the inactive slot, and then rebooting resulted in bootloop..
restored to previous slot in fastboot and tried the OTA process again, and resulted in bootloop again..
now i have switched back to the old slot running 10.5.6..
anyone knows why the process resulted in bootloop, and any fix for this?
tia..
[edit]
resolved now..
Probably your mods. I have done same update resulting NO bootloop
Tracker31 said:
Probably your mods. I have done same update resulting NO bootloop
Click to expand...
Click to collapse
thx for the reply.. i dont have any magisk mod installed, apart from magisk itself..
(well theres the built-in systemless host module that i enabled, but i dont think this would cause any trouble as it has been there in the last few updates..)
and the same setup worked fine in the previous 10.5.4, 10.5.5 and 10.5.6 updates..
not sure what went wrong this time..
Try to download update package again. Maybe something broken
Tracker31 said:
Try to download update package again. Maybe something broken
Click to expand...
Click to collapse
already tried twice last night.. i had that doubt as well.. seems quite a few indian users are getting the update fast this time, so i thought maybe the wrong indian version was pushed to my device (global version)?
will try again tonight to see if anything changes.. thx..
Anyway it's not update failure, cuz it works for me
Tracker31 said:
Anyway it's not update failure, cuz it works for me
Click to expand...
Click to collapse
and your regional version is?
AC01BA
Doesn't matter which version you flash. I crossed flashed 3 times from EU to Global and vice versa. No issues.
Maybe you forgot to auto flash Magisk again after installing OTA. It is also recommended to flash Magisk to inactive slot after installing right away "before" reboot.
lekiaM said:
Doesn't matter which version you flash. I crossed flashed 3 times from EU to Global and vice versa. No issues.
Maybe you forgot to auto flash Magisk again after installing OTA. It is also recommended to flash Magisk to inactive slot after installing right away "before" reboot.
Click to expand...
Click to collapse
actually i did remeber to flash magisk to inactive slot after OTA before rebooting.. but seemingly im the only one with this bootloop, so probably certain config in my device caused the issue..
im now in the process of trying the OTA once more, and if this fails again, i shall try to just OTA without patching with maigsk..
if the device then boots, i shall root with magisk from scratch again then..
Strange, and yes must be something system-side. That's why they always say remove modules before flashing OTA or at least disable them. But in my case (only have another font module, iOS smileys and Ktweak) they didn't interfere with the last 2 Ota's. So updating went fine, but i might disable or uninstall them in future OTA's. To avoid such problems you are facing.
You need to uninstall all magisk mods before the update, buy you don't have any installed.
I also believe you need to download the full rom and not incremental. After the update you need to install magisk normally AND also to inactive slot before the reboot.
I haven't installed the latest yet but there previous updates are are installed without issues.
turned out to be a system modification i did back in the 10.5.4 times.. had no problem with it when updating to 10.5.5 & 6, so i totally forgot about its existence.. disabled the mod, updated to 10.5.7, and then enabled the mod again.. now everything is working fine..
Would you mind sharing what it was? I'm about to update and I got some system mods going on that could interfere, and I'm sire I'm forgetting about some too
ASTDEv3 said:
Would you mind sharing what it was? I'm about to update and I got some system mods going on that could interfere, and I'm sire I'm forgetting about some too
Click to expand...
Click to collapse
the magisk module created by smali patcher..