Related
Hello, everyone. It's been a long time since I posted, maybe since my S4.
There may be some of you who are not getting signal or just "Emergency Calls Only" after update/upgrade/flash to 6.0 (MM).
There's a simple solution which I found after many and many tries.
Modem: https://www.mediafire.com/?14az40tk2dkd3gw
Step 1. Download the Modem attached.
Step 2. Open Odin, look for the file and put it in CP.
Step 3. Flash it.
Step 4. There's not step 4.
Enjoy your signal.
Edit:
If any of above does not work you can use this method by dhiru1602
Happened to me. I had no signal after flashing Marshmallow. Reverting back to any lollipop baseband fixed the issue. I did some digging and it turns out there was some provisioning parameters changes done from Lollipop to Marshmallow which was preventing network to work after flashing Marshmallow baseband. The RIL was using the wrong radio technology setting.
I did the following to fix the issue.
1. Dial ##72786#
2. Press Yes to reset the Provisioning Settings to default.
3. Reboot the Phone.
CAUTION: I am not responsible for broken unlocks. I tried this method and my phone was still unlocked. I don't know if it works for everyone without breaking unlock..
Click to expand...
Click to collapse
If you have any questions don't be afraid to ask, we are here to help and since Nougat is out there may be many bugs like Uber eating the battery away.
About to try this, havent had signal for 2 days now and it would only reboot after about 2 minutes even with airplane mode on. Weird thing is one time itd boot with a signal bar icon area and the next time it would be gone completeley and so on back and forth. If this works you are my hero.
---------- Post added at 04:55 PM ---------- Previous post was at 04:47 PM ----------
Will this work for lollipop and Marshmallow?
droseofc said:
About to try this, havent had signal for 2 days now and it would only reboot after about 2 minutes even with airplane mode on. Weird thing is one time itd boot with a signal bar icon area and the next time it would be gone completeley and so on back and forth. If this works you are my hero.
---------- Post added at 04:55 PM ---------- Previous post was at 04:47 PM ----------
Will this work for lollipop and Marshmallow?
Click to expand...
Click to collapse
It's the lollipop radio, so it will work fine, and yes, it will work in Marshmallow, tested by myself.
Is there anything i need to do first? After flashing lollipop or marshmallow my phone will start and stay on for about a minute with no signal and then reboot and do it all over... ive done factory reset. Turning airplane mode on delays the reboot but will end up rebooting. The area for signal bars is there just no bars
---------- Post added at 05:14 PM ---------- Previous post was at 05:10 PM ----------
Should i do rtn for sprint clear efs and have modem in cp slot with the lollipop or marshmallow in ap slot or do separately? Sorry for blowing up thread i just dont want to resort to calling sprint with no resolution from them.
To check if it's a situation about CPU reboots install TWRP and put the phone to do some random operation that TWRP has, if it does reboot even in Recovery then your phone is faulty, if not then let's do something about it, I wil guide you.
Sweet i appreciate it, im flashing marshmallow back on then i will flash twrp, the sim card wont react when putting one in or out such as requiring a reboot. I just called sprint and they set an appt but id rather not. I will post as soon as twrp mode and let u know if its rebooting there.
---------- Post added at 06:49 PM ---------- Previous post was at 06:41 PM ----------
Im in twrp mode now, no reboot so far
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
Basically in a nutshell how it happened is I upgraded to marshmallow via oden and everything was good, signal everything. So then i installed twrp 3.0.0.0-3 or what ever and through twrp installed supersu 2.68 and rebooted and thats when signal was gone. Reflashed marshmallow via oden and same issue up til now. Have flashed ok3 and marshmallow with no fix.
---------- Post added at 08:06 PM ---------- Previous post was at 07:20 PM ----------
I now have tried installing moar rom through twrp and it bootloops about the same timeframe it would reboot in stock only not getting fully booted but rebooting while the boot animation is going where the stock would fully boot and then about 30 seconds it would reboot. Flashing stock would successfully boot the first time and then the 30 second reboot, flashing custom reboots 30 seconds still only not fully booting the first time. Sim status and imei status have no information on stock and software version shows unavailable on stock with both lollipop and marshmallow. The only place it doesnt reboot is twrp or philz touch or stock recovery
droseofc said:
Sweet i appreciate it, im flashing marshmallow back on then i will flash twrp, the sim card wont react when putting one in or out such as requiring a reboot. I just called sprint and they set an appt but id rather not. I will post as soon as twrp mode and let u know if its rebooting there.
---------- Post added at 06:49 PM ---------- Previous post was at 06:41 PM ----------
Im in twrp mode now, no reboot so far
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
Basically in a nutshell how it happened is I upgraded to marshmallow via oden and everything was good, signal everything. So then i installed twrp 3.0.0.0-3 or what ever and through twrp installed supersu 2.68 and rebooted and thats when signal was gone. Reflashed marshmallow via oden and same issue up til now. Have flashed ok3 and marshmallow with no fix.
---------- Post added at 08:06 PM ---------- Previous post was at 07:20 PM ----------
I now have tried installing moar rom through twrp and it bootloops about the same timeframe it would reboot in stock only not getting fully booted but rebooting while the boot animation is going where the stock would fully boot and then about 30 seconds it would reboot. Flashing stock would successfully boot the first time and then the 30 second reboot, flashing custom reboots 30 seconds still only not fully booting the first time. Sim status and imei status have no information on stock and software version shows unavailable on stock with both lollipop and marshmallow. The only place it doesnt reboot is twrp or philz touch or stock recovery
Click to expand...
Click to collapse
Try the directions in this post http://forum.xda-developers.com/showthread.php?p=66040143
954wrecker said:
Try the directions in this post http://forum.xda-developers.com/showthread.php?p=66040143
Click to expand...
Click to collapse
Try the general steps but flashing the official firmware or using the one from that thread? The biggest issue currently besides no signal is the rebooting every 30 seconds unless im in download mode or recovery be it twrp or stock. The software version under settings and status shows as unknown as well as sim status and imei status on both lollipop and marshmallow. If i could get it to stop rebooting i could play around in hidden menu or build prop or csc settings but i cant do anything hardly in 30 seconds before reboot. Does the same thing in safe mode
im in the same boat after i tried to change my kernel.
its looking like a fd up efs folder. we need a good backup to resotore in twrp to fix efs, or efs repair tool
droseofc said:
Try the general steps but flashing the official firmware or using the one from that thread? The biggest issue currently besides no signal is the rebooting every 30 seconds unless im in download mode or recovery be it twrp or stock. The software version under settings and status shows as unknown as well as sim status and imei status on both lollipop and marshmallow. If i could get it to stop rebooting i could play around in hidden menu or build prop or csc settings but i cant do anything hardly in 30 seconds before reboot. Does the same thing in safe mode
Click to expand...
Click to collapse
Hi are was able to fix your issue I have a phone with the same issue i try almost everything and the only way if I install a international room but no signal and is missing meid in settings
if you have a solution for this the phone is useless please share,
Duplicate post-delete
which modem will give me the best signal/reception? lollipop or MM ?
can you tell me
this modem file working all models like s6 s6edge note5 etc etc... ??????????????????????????
i have lots of pecs for emergency call service problem so please reply me fast if this file is working so my problem is solve
Same problem but different model
Hello, I got the exact same problem but my note it's a different model than yours, is it safe to flash with the file you post, I'm from Mexico and I'm on emergency calls only, the flashing of this file it's done in download mode also right?
Saludos.
Carlos.aat said:
Hello, I got the exact same problem but my note it's a different model than yours, is it safe to flash with the file you post, I'm from Mexico and I'm on emergency calls only, the flashing of this file it's done in download mode also right?
Saludos.
Click to expand...
Click to collapse
No.
Hi , my note 5 was originally N920P(sprint) before I bought it. It was rooted and the model number was changed to N920F (IDK how they did it) . I guess they did that to bypass network lock. Please how can I flash official firmware without relocking the device to sprint? I heard others with the same phone as mine are getting no network reception after flashing official firmware. Thanks
Happened to me. I had no signal after flashing Marshmallow. Reverting back to any lollipop baseband fixed the issue. I did some digging and it turns out there was some provisioning parameters changes done from Lollipop to Marshmallow which was preventing network to work after flashing Marshmallow baseband. The RIL was using the wrong radio technology setting.
I did the following to fix the issue.
1. Dial ##72786#
2. Press Yes to reset the Provisioning Settings to default.
3. Reboot the Phone.
CAUTION: I am not responsible for broken unlocks. I tried this method and my phone was still unlocked. I don't know if it works for everyone without breaking unlock..
Thanks Buddy. It worked.
But I have another phone with the same problem
Will this file and method work for Sprint Galaxy S5?
TravisAntonio said:
Hello, everyone. It's been a long time since I posted, maybe since my S4.
There may be some of you who are not getting signal or just "Emergency Calls Only" after update/upgrade/flash to 6.0 (MM).
There's a simple solution which I found after many and many tries.
Modem: https://www.mediafire.com/?14az40tk2dkd3gw
Step 1. Download the Modem attached.
Step 2. Open Odin, look for the file and put it in CP.
Step 3. Flash it.
Step 4. There's not step 4.
Enjoy your signal.
Click to expand...
Click to collapse
thanks working for me...
fail with me
i flashed with this modem but it doasnt work with me i still have emergency calls only please helps i am verry lost
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
GAPPS VERSIONS
https://www.androidfilehost.com/?fid=674106145207484591 v.02
https://www.androidfilehost.com/?fid=674106145207484438 v.01
NO GAPPS
https://www.androidfilehost.com/?fid=890278863836283078
Installation
fastboot flash system_a system-arm64-ab.img
or if you want flash no gapps version
fastboot flash system_a system-arm64-nogapps.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
raimondomartire said:
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
https://www.androidfilehost.com/?fid=674106145207484438
Installation
fastboot flash system_a system-arm64-ab.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
Click to expand...
Click to collapse
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
el4nimal said:
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
Click to expand...
Click to collapse
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
raimondomartire said:
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
Click to expand...
Click to collapse
Is there any file I can modify in order to change it? I just want to set my display to 120hz
el4nimal said:
Is there any file I can modify in order to change it? I just want to set my display to 120hz
Click to expand...
Click to collapse
Your display on all treble roms is always on 120 Hz. You can't switch to 60 or 90. So I must add an option on settings like stock rom
Thanks a lot for your work in putting this together!
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
BakaSenpai said:
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
Click to expand...
Click to collapse
On this rom you can install magisk manager or, better for me, install in twrp magisk 11.4 zip file
I'm uploading now two new builds. RR sources on this project give same media encoder problems. Now I don't find errors
New builds with GApps
https://www.androidfilehost.com/?fid=818070582850511202
Without Gapps
https://www.androidfilehost.com/?fid=962187416754478323
Does this have any call blocking that uses a wildcard and does this have protected apps feature?
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
If You have installed magisk flash Google framework module and in this way you'll solve all problems. For no gapps ver i'll look inside
In 10 minutes from now 2 new builds:
changelogs
- new su daemon
- I hope to solve playstore hang
GAPPS
https://www.androidfilehost.com/?fid=674106145207484591
NO Gapps
https://www.androidfilehost.com/?fid=890278863836283078
raimondomartire, I appreciate your help! I wanted to let you know that for some reason my Bluetooth microphone doesn't work. When I am on a call it only goes through speakers, even if I toggle handset\bluetooth, and the volume doesn't do anything. I had to completely disconnect for it to go through handset. Any thoughts?
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
EDIT: It may of been an issue with the the beta Oreo firmware. I updated to the release Oreo firmware and all seems good so far. I had one hard crash during the setup process but that's it.
EDIT 2: The hard crash issue does appear to still be there, but happens far less frequently. It'll crash usually once a day and sometimes it'll crash and get stuck in download mode.
EDIT 3: The crashing issues seems to be the same as before. I've had it crash 7 or 8 times today.
ThatGuy94 said:
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
Click to expand...
Click to collapse
Mine hasn't done that. I'm running v02.
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
That's a known issue. Easiest way is to either shutdown instead of reboot or connect to pc and use fastboot set_active a
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
Thankfully NO! Don't know what I usually mess up but this rom is doing fine. I do believe it has something to do with how you install. Try doing everything with fastboot, avoid using twrp. Also power off and reboot will both get you stuck in download mode. I will not do either if I am not by a PC to fix it. I also have my old one + one with me to put my sim in if needed.
BakaSenpai said:
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
Click to expand...
Click to collapse
If you have that issue, go to settings and force stop the Play Store. Once you reopen it, it should begin to download your apps like normal.
https://developers.google.com/android/images
No change log yet, but still 9.0
Installed, no issues. Haven't rooted again yet though. The only thing I see so far is after boot, once you unlock it says "Pixel Booting." (or starting?)
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
Bulletin is up: https://source.android.com/security/bulletin/pixel/2019-03-01
Just updated using the OTA via ADB sideload, rooted, and all is well.
Pixel 3 XL updates
Improved startup and responsiveness of the camera app
Improved recovery in the instance of OTA failure
Improved storage performance
Improved Bluetooth reliability
Improved playback of encrypted media in some video apps
Woohoo
Performance back to normal after the laggy February update!
Hopefully battery life is better again. Feb definitely made mine worse.
"There are no Pixel security patches in the March 2019 Pixel Update Bulletin."
Am I reading this right? I don't think I have ever seen an update without security patches.
Golf c said:
"There are no Pixel security patches in the March 2019 Pixel Update Bulletin."
Am I reading this right? I don't think I have ever seen an update without security patches.
Click to expand...
Click to collapse
There is, here is the chagelog
Improved startup and responsiveness of the camera app
Improved recovery in the instance of OTA failure
Improved storage performance
Improved Bluetooth reliability
Improved playback of encrypted media in some video apps
Jiggs82 said:
There is, here is the chagelog
Improved startup and responsiveness of the camera app
Improved recovery in the instance of OTA failure
Improved storage performance
Improved Bluetooth reliability
Improved playback of encrypted media in some video apps
Click to expand...
Click to collapse
Nothing to do with security
Golf c said:
Nothing to do with security[/QUOTE
https://source.android.com/security/bulletin/2019-03-01
https://source.android.com/security/bulletin/pixel/2019-03-01.html
Click to expand...
Click to collapse
Updated and re-rooted the wife's Pixel 3 today. Magisk 18.1 with TWRP 3.2.3-0 (.img only). ElementalX 1.05 with EX Kernel Manager direct flash. All worked normally. Couldn't do my 3XL this month since I am on dotOS. I did have to clear cache and app data (hide with Magisk of course) to get Play Store to re-certify the device which then showed a Google Pay update. Even though they claim no security fixes, clearly there are some.
Soo, I used the latest TWRP, the one ending in 4, the whole time I was in TWRP my phone vibrated lol. Anyone else have this happen? Everything still worked, but yeah, that was weird.
Jiggs82 said:
Golf c said:
Nothing to do with security[/QUOTE
https://source.android.com/security/bulletin/2019-03-01
https://source.android.com/security/bulletin/pixel/2019-03-01.html
Click to expand...
Click to collapse
Thanks. I knew I was reading it wrong
---------- Post added at 12:10 AM ---------- Previous post was at 12:09 AM ----------
gettinwicked said:
Soo, I used the latest TWRP, the one ending in 4, the whole time I was in TWRP my phone vibrated lol. Anyone else have this happen? Everything still worked, but yeah, that was weird.
Click to expand...
Click to collapse
Yes, alot of us. I reverted back to previous twrp.
Click to expand...
Click to collapse
Golf c said:
"There are no Pixel security patches in the March 2019 Pixel Update Bulletin."
Am I reading this right? I don't think I have ever seen an update without security patches.
Click to expand...
Click to collapse
Apparently you missed the February update...
nomisunrider said:
Apparently you missed the February update...
Click to expand...
Click to collapse
Doubtful. I may not be able to read, but I miss no updates for 8 years
---------- Post added at 01:33 AM ---------- Previous post was at 01:33 AM ----------
Bootloader and radio changed again this month
Golf c said:
Doubtful. I may not be able to read, but I miss no updates for 8 years
---------- Post added at 01:33 AM ---------- Previous post was at 01:33 AM ----------
Bootloader and radio changed again this month
Click to expand...
Click to collapse
Hopefully the radio is better, as the feb one was garbage for me, failing to obtain 4G at times, dropping calls, bad call quality
I'm rooted with Magisk 18 and have a twrp recover 3.2 installed. Can I install this via OTA? I assume the root access will be root. What else do I need to do, besides reflashing Magisk zip?
walle4893 said:
I'm rooted with Magisk 18 and have a twrp recover 3.2 installed. Can I install this via OTA? I assume the root access will be root. What else do I need to do, besides reflashing Magisk zip?
Click to expand...
Click to collapse
If you're rooted, you can't take an OTA. You'll either have to flash the image, using the flash all bat, or ADB sideload the OTA. Either way you'll have to re-root after. If you flash the image you'll need to edit out the -w in order to keep your data. If you sideload the OTA you don't need to do anything to keep your data. It will install without wiping.
Hmmmm...Battery life really good today with the new OTA. Installed yesterday and today it seems much better.
gettinwicked said:
Hopefully battery life is better again. Feb definitely made mine worse.
Click to expand...
Click to collapse
Likewise, both battery and performance.
Anyone having issues with Warp Charge after updating to 9.5.7 or 9.5.8?
I only just noticed it but now that I think about it, I've not had Warp Charge for quite some time now. Rather than getting the lightning bolt icon, I only get the standard charging icon.
I have tried two Warp Charge compatible charger bricks and cables (the one from my 6T McLaren and the one from my 7 Pro) and both work fine on the 6T McLaren but not on the 7 Pro.
Seems this not just restricted to myself: https://forums.oneplus.com/threads/oneplus-7pro-warp-charge-not-working.1049579/
I was gonna try downgrade back to 9.5.5 to see if that fixes it, but when I tried to do that, the phone wouldn't boot! (thank god for Nandroid backups ).
EDIT
As discovered by 2ndwonder - this appears to be an issue with Magisk Canary builds. Rolling back to 19.3 Stable Magisk has fixed the issue.
Github issue link: https://github.com/topjohnwu/Magisk/issues/1649
I just noticed the same issue! Don't know for how long my warp charge is missing. I tried disabling magisk modules but nothing happens. My old dash charger from my 3t does not work as well. Also both chargers warp charge my 3t, so there is that. Using latest 9.5.8 with Skydragon kernel.
Noticed the same. It was one of the big reasons I bought this phone. Any luck?
See some people reports, that installing 9.5.8 manually via TWRP fixes WARP charge issue
In my case. I noticed that Warp charge was gone. Latest magisk canary zip disabled it. I flashed stable back again and Warp was back after reboot. Somehow my magisk changes itself to canary versions and kills warp
GM1917 on 9.5.8, Renovate Ice 3.0, with other magisk mods enabled,... No issues.
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Can please the people having this issue upload here a screenshot of their current magisk version? I am looking into this issue and I think I have a solution
2ndwonder said:
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Yes, magisk has itself changed on my device to download beta and canary versions. I don't know if it is a bug or expected. But flashing latest canary magisk (user just don't notice, you see an update and update) and after reboot Warp charge is disabled. I need to check this with more users having this issue. I can confirm with my device that going into magisk settings and changing update Chanel to stable, then installing 19.3 solves the issue. After reboot Warp is back. Took me almost a day to isolate the issue. But not any module fault apparently.
elmarian756 said:
Can please the people having this issue upload here a screenshot of their current magisk version? I am looking into this issue and I think I have a solution
Click to expand...
Click to collapse
I already solved it bro. Just install Magisk v19.3 (STABLE VERSION) from https://forum.xda-developers.com/app...mless-t3473445 and your problem is solved.
You should be able to warp charge now.
2ndwonder said:
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
2ndwonder said:
I already solved it bro. Just install Magisk v19.3 (STABLE VERSION) from https://forum.xda-developers.com/app...mless-t3473445 and your problem is solved.
You should be able to warp charge now.
Click to expand...
Click to collapse
So my theory was correct. Good! You can change directly magisk version going into magisk settings and switching update channel to stable. Then install directly and reboot. Hope this thread help others!
elmarian756 said:
Yes, magisk has itself changed on my device to download beta and canary versions. I don't know if it is a bug or expected. But flashing latest canary magisk (user just don't notice, you see an update and update) and after reboot Warp charge is disabled. I need to check this with more users having this issue. I can confirm with my device that going into magisk settings and changing update Chanel to stable, then installing 19.3 solves the issue. After reboot Warp is back. Took me almost a day to isolate the issue. But not any module fault apparently.
Click to expand...
Click to collapse
yeah, well at least we have a solution for now
---------- Post added at 06:00 PM ---------- Previous post was at 05:59 PM ----------
elmarian756 said:
So my theory was correct. Good! You can change directly magisk version going into magisk settings and switching update channel to stable. Then install directly and reboot. Hope this thread help others!
Click to expand...
Click to collapse
yes good job man.
Thank you this fixed it for me...uninstalled canary version (don't know how it switched as well)...rolled back to 19.3 and Warp charging is back. ?
2ndwonder said:
I got this issue too! anyone have a solution?
---------- Post added at 05:47 PM ---------- Previous post was at 05:31 PM ----------
so I flashed the latest stable magisk which is v19.3 and that did the trick. I no longer have any problems anymore with my mods enabled in magisk manager with the warp charging.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Wow, very nice find! I flashed back to Stable and indeed, now Warp Charge is working!
Thanks a lot. Appears someone else raised an issue on Github - https://github.com/topjohnwu/Magisk/issues/1649 I'll see what logs they need and can update to Canary again to provide the logs they need
Yep, Stable works a treat!
I had the same issue. Idk how it switched to Canary. But once I flashed 19.3 stable. I have Warp charging back.
I've always been on stable. Uninstalled and reinstalled 19.3 but still no warp charge. Do i need to wipe something in Twrp?
hallo dare said:
I've always been on stable. Uninstalled and reinstalled 19.3 but still no warp charge. Do i need to wipe something in Twrp?
Click to expand...
Click to collapse
You should try first factory reset, and flashing latest OOS stock with no magisk or Anything else installed and check if warp works there. If it doesn' it means that warp is not working with stock boot img and rom completely unaltered. Which probably means dirty usb port or faulty cable/ charger / motherboard. If it does work, then check flashing what breaks warp. Most users reported magisk latest canary version.
Most likely after a clean flash it will work fine.
Working for me. 9.5.8
I can confirm that my cable got mixed up with my wife's oneplus 6 cable and that was my issue. As soon as I swapped back all was good again. I tried the OP6 cable just to be sure and right enough, it would not warp charge.
Hey guys I found a build of android 10 and it's stable for WHYRED only bug I found is night mod .
https://sourceforge.net/projects/sh...om-10.0-whyred-OFFICIAL-20190917.zip/download
I am note developer of this rom so don't ask stupid questions XD
Only kernel work on android 10 is pure CAF x11
Flash magisk 19.4 after flash ROM . Otherwise your phone going too boot loop.
Have good days with it ?
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Bruh.
Hardly roms are being out and you want a stable one
Wait for another 2 months for a good one to be out!
This Post was sent from a Script by @baalajimaestro
0veR said:
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
Click to expand...
Click to collapse
Tell me the bugs ? I didn't face any one . Just volte didn't work for me and ROM have good speed .
shea83 said:
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
Click to expand...
Click to collapse
I didn't face any reboot . I have note 5 ai global
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
How did you enable volte in this rom ? My operator have volte but not working !
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
Link please?
harigavara said:
Link please?
Click to expand...
Click to collapse
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
No need gapps?
Installation instructions please?
ali.damiri said:
How did you enable volte in this rom ? My operator have volte but not working !
Click to expand...
Click to collapse
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
harigavara said:
No need gapps?
Installation instructions please?
Click to expand...
Click to collapse
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
Thank you. Bluetooth is working?
Did you see any bugs till?
xell75 said:
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
Click to expand...
Click to collapse
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
The only bug I have found for 2 days of usage is that night mode is not working
I had bootloop with that rom. I'm gonna try installing OP's rom and then updating
harigavara said:
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
Click to expand...
Click to collapse
Is your storage encrypted?
The rom is very smooth. Using for about 12 hours and no problems. It's like a pixel with sd card slot.
xell75 said:
Is your storage encrypted?
Click to expand...
Click to collapse
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
harigavara said:
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
Click to expand...
Click to collapse
You have to format data (not just wipe) to delete encryption, this will of course wipe your internal storage, so backup it id needed. Then it should boot.