Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
GAPPS VERSIONS
https://www.androidfilehost.com/?fid=674106145207484591 v.02
https://www.androidfilehost.com/?fid=674106145207484438 v.01
NO GAPPS
https://www.androidfilehost.com/?fid=890278863836283078
Installation
fastboot flash system_a system-arm64-ab.img
or if you want flash no gapps version
fastboot flash system_a system-arm64-nogapps.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
raimondomartire said:
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
https://www.androidfilehost.com/?fid=674106145207484438
Installation
fastboot flash system_a system-arm64-ab.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
Click to expand...
Click to collapse
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
el4nimal said:
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
Click to expand...
Click to collapse
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
raimondomartire said:
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
Click to expand...
Click to collapse
Is there any file I can modify in order to change it? I just want to set my display to 120hz
el4nimal said:
Is there any file I can modify in order to change it? I just want to set my display to 120hz
Click to expand...
Click to collapse
Your display on all treble roms is always on 120 Hz. You can't switch to 60 or 90. So I must add an option on settings like stock rom
Thanks a lot for your work in putting this together!
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
BakaSenpai said:
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
Click to expand...
Click to collapse
On this rom you can install magisk manager or, better for me, install in twrp magisk 11.4 zip file
I'm uploading now two new builds. RR sources on this project give same media encoder problems. Now I don't find errors
New builds with GApps
https://www.androidfilehost.com/?fid=818070582850511202
Without Gapps
https://www.androidfilehost.com/?fid=962187416754478323
Does this have any call blocking that uses a wildcard and does this have protected apps feature?
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
If You have installed magisk flash Google framework module and in this way you'll solve all problems. For no gapps ver i'll look inside
In 10 minutes from now 2 new builds:
changelogs
- new su daemon
- I hope to solve playstore hang
GAPPS
https://www.androidfilehost.com/?fid=674106145207484591
NO Gapps
https://www.androidfilehost.com/?fid=890278863836283078
raimondomartire, I appreciate your help! I wanted to let you know that for some reason my Bluetooth microphone doesn't work. When I am on a call it only goes through speakers, even if I toggle handset\bluetooth, and the volume doesn't do anything. I had to completely disconnect for it to go through handset. Any thoughts?
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
EDIT: It may of been an issue with the the beta Oreo firmware. I updated to the release Oreo firmware and all seems good so far. I had one hard crash during the setup process but that's it.
EDIT 2: The hard crash issue does appear to still be there, but happens far less frequently. It'll crash usually once a day and sometimes it'll crash and get stuck in download mode.
EDIT 3: The crashing issues seems to be the same as before. I've had it crash 7 or 8 times today.
ThatGuy94 said:
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
Click to expand...
Click to collapse
Mine hasn't done that. I'm running v02.
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
That's a known issue. Easiest way is to either shutdown instead of reboot or connect to pc and use fastboot set_active a
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
Thankfully NO! Don't know what I usually mess up but this rom is doing fine. I do believe it has something to do with how you install. Try doing everything with fastboot, avoid using twrp. Also power off and reboot will both get you stuck in download mode. I will not do either if I am not by a PC to fix it. I also have my old one + one with me to put my sim in if needed.
BakaSenpai said:
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
Click to expand...
Click to collapse
If you have that issue, go to settings and force stop the Play Store. Once you reopen it, it should begin to download your apps like normal.
Related
XC/KUGO/F5321 OmniROM BUILDS
OREO 8.1
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (Optional) Flash a gapps package
4. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. No USB tethering
2. Wifi sometimes fails to turn on
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-8.1
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XC][O][8.1][WEEKLY]OmniROM, ROM for the Sony Xperia X Compact
Contributors
oshmoun, humberos
Source Code: https://github.com/omnirom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2018-01-14
Last Updated 2018-11-03
Awesome!! Thank you very much, I'll be trying this out immediately!
oshmoun said:
XC/KUGO/F5321 OmniROM BUILDS
OREO 8.1
Click to expand...
Click to collapse
So far so good. Using Magisk root, and Xposed beta, and micro g, and all working well. WiFi did disconnect once so far. Hopefully a fix coming... Thanks
@oshmoun - can you add option to switch nav buttons, or enable nav bar tuner? I can't get my apktool working on O, and no Gravitybox for O yet either...
levone1 said:
So far so good. Using Magisk root, and Xposed beta, and micro g, and all working well. WiFi did disconnect once so far. Hopefully a fix coming... Thanks
@oshmoun - can you add option to switch nav buttons, or enable nav bar tuner? I can't get my apktool working on O, and no Gravitybox for O yet either...
Click to expand...
Click to collapse
Try this: https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner
I can register new fingerprints, but i cant use them to unlock my phone or to login on apps.
I installed TWRP https://forum.xda-developers.com/x-compact/development/recovery-twrp-3-1-1-xperia-x-compact-t3640914, the OEM image and I'm testing OmniROM now, thanks for your work, where can I report bugs?
OmniROM work greatly on my device, I'm using since 14 Jan without any problem! Really Thanks!
coderex96 said:
I installed TWRP https://forum.xda-developers.com/x-...ecovery-twrp-3-1-1-xperia-x-compact-t3640914, the OEM image and I'm testing OmniROM now, thanks for your work, where can I report bugs?
Click to expand...
Click to collapse
Here only. With logs if possible.
farfetch said:
Try this: https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner
Click to expand...
Click to collapse
Oh yeah, I actually have that in my downloads already. Forgot about it... Thanks
---------- Post added at 12:54 PM ---------- Previous post was at 12:51 PM ----------
Lost mobile data today. At first boot, working fine, then installed AfWall and changed dns, and still working fine yesterday. Then this morning, no mobile data. Signal shows bars, but no 4g/lte, etc, and won't connect. Tried disabling and uninstalling tweaks and many reboots, but no change.
Update - now it's in and out...
levone1 said:
Oh yeah, I actually have that in my downloads already. Forgot about it... Thanks
---------- Post added at 12:54 PM ---------- Previous post was at 12:51 PM ----------
Lost mobile data today. At first boot, working fine, then installed AfWall and changed dns, and still working fine yesterday. Then this morning, no mobile data. Signal shows bars, but no 4g/lte, etc, and won't connect. Tried disabling and uninstalling tweaks and many reboots, but no change.
Update - now it's in and out...
Click to expand...
Click to collapse
seems to be caused by installing afwall? could you please try without it?
oshmoun said:
seems to be caused by installing afwall? could you please try without it?
Click to expand...
Click to collapse
I am testing now. I haven't checked it enough to saying it's a rom issue; just wondering if anyone else has had it. It worked find with AfWall yesterday, but now in and out. I remember the same issue with AfWall on certain CM 12 roms...
oh man, thanks for making these ROMs, but the updater of 7.1 recommended this update and I just pressed install. Recovering from a brick now…
I'll come back to it later, when I have time for all the prerequisites.
OpenDelta
Nice work. OpenDelta advertised this update which I naturally installed without checking the requirements here. No requirements were stated before the update. Bricked my phone in a place where I couldn't do much about it. Just ask to please be more considerate since I more or less trust the update tool.
FYI: I dirty flashed from 7.1.2 via opendelta too. Once I flashed the oem partition using fastboot, the device booted again (only a handful of apps force closed and needed their data cleared to function properly again). Not the best choice to make this update available for installation with opendelta, no...
edit: forgot to mention I of course also had to update gapps to an 8.1 supporting version. I downloaded an unofficial pico opengapps from here
drstefankrank said:
oh man, thanks for making these ROMs, but the updater of 7.1 recommended this update and I just pressed install. Recovering from a brick now…
I'll come back to it later, when I have time for all the prerequisites.
Click to expand...
Click to collapse
cds0 said:
Nice work. OpenDelta advertised this update which I naturally installed without checking the requirements here. No requirements were stated before the update. Bricked my phone in a place where I couldn't do much about it. Just ask to please be more considerate since I more or less trust the update tool.
Click to expand...
Click to collapse
harryharryharry said:
FYI: I dirty flashed from 7.1.2 via opendelta too. Once I flashed the oem partition using fastboot, the device booted again (only a handful of apps force closed and needed their data cleared to function properly again). Not the best choice to make this update available for installation with opendelta, no...
Click to expand...
Click to collapse
Good to know flashing the odm image helps when updating from 7.1
About opendelta, i don't have much control over it to filter out the 8.1 build. It's all done automatically.
Besides, it did do its job well. It notified about the new version.
The requirement to flash a seperate ODM image is similar to how it's needed to flash a vendor image, and not just system and boot images, on Google devices. Guess that's new for Sony devices, hence this confusion.
@oshmoun - how about kcal support? Here's my tests with kppd - https://forum.xda-developers.com/showpost.php?p=75200267&postcount=64 (and forward)
@oshmoun: Yeah I was kind of surprised to see 8.1 was available through opendelta, and I didn't think it would work. So I backed up everything before upgrading. Which is probably what people should do before upgrading anyway
Flashing the oem partition was a relatively easy fix, so it's all good.
Thanks again for your great work! It's much appreciated as the number of custom roms for kugo is really slim pickings.
Latest stock ftf compatible is 34.3.A.0.252, right?
EDIT: It seems so. Flashed it and this build works great with it, so far.
I've performed a clean install after full wipe and also don't have mobile data working. Wi-Fi works, though.
Strange issue I have is the lack of sound over bluetooth ONLY in calls. Playing music/video works otherwise. It's quite baffling. This was working as expected on 7.1.
This is not a guide as such but more of direction to other peoples hard work and effort. I am not a developer, just an experimenter!
Main Credits - @MishaalRahman and @phhusson.
For me one of the main selling points of the Mediapad M5 was being Project Treble enabled. Being a big Nexus/Pixel fan I am not particularly fond of EMUI.
So after reading this detailed and clear guide by Mishaal Rahman http://www.xda-developers.com/flash-generic-system-image-project-treble-device/, I was able to successfully install an AOSP Generic System Image by phhusion http://forum.xda-developers.com/project-treble/trebleenabled-device-development/experimental-phh-treble-t3709659
My device - CMR-W09 (10.8" non pro wifi).
I flashed v17 with Gapps and SU and apart from an Android System error upon boot it seems to work ok. I have not had much time to play with it but so far Wifi, Bluetooth, sound, camera, fingerprint sensor, MTP and SD card appear to be working. I had issues with google play not downloading apps but worked after clearing data/cache on google play and google play services. Also have issues with superuser force closing.
For the nervous and unsure, you can easily return to stock Huawei firmware by flashing your devices stock system.img in fastboot.
Obviously bootloader needs to be unlocked see guide - https://forum.xda-developers.com/mediapad-m5/how-to/bootloader-unlock-guide-t3781275 by @Apo11on. You can use Apo11on's root guide to download your firmware to get your stock system.img.
OEM needs to be disabled in developer options.
It is best to factory reset via recovery mode and then boot straight into bootloader to keep FRP unlocked.
Do this at your own risk but please read all the available information and guides on XDA.
pphusion has made other Project Treble roms but I have yet to try them. Hopefully it would be nice if someone could fully develop Lineage for this device.
which rom did you use ? the A/B one or A only ?
It's an A-only device.
I tried AOSP with GAPPS and SU but SuperSU shows the su binary as being occupied through several reboots. Getting the Lineage GSI now and will root with magisk.
Edit:
Blah... Lineage is not an option until we have twrp :/ (at least for me) No way to install GAPPS.
Edit:
SU works with phh's super user available from the play store.
Yes i have the AOSP one now on my AL-09 and it works fine till now. Bugs : home Button not working but fingerprint works, supersu with the phhs one works. Bluetooth sometimes gives an error message. Battery drain is a little bit high. I installed the Huawei camera apk from treble forum and This works also good.
Another Bug is Apps sometimes force closing but Not often.
How is Lineage performing?
A little bit off topic, but how did you unlock the bootloader on the Wifi only version since the website for the code is offline for a few weeks now?
Thanks in advance.
Fantastic to see that Treble works.
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
fargonaz said:
On my AL09(ASOP with gapps and su) bluetooth never connects to any of my devices and fc on pairing.
Lineage was a non-starter, since I was unable to get gapps running. I was also getting a vendor mismatch toast. I'm back on the stock .125(C00), no working tether is infinitely more useable than no BT.
It was nice to be able to flash something that didn't brick it and was partially useable.
Click to expand...
Click to collapse
I understand, Do you think it gets more stable for our device in the future?
florian-m19 said:
I understand, Do you think it gets more stable for our device in the future?
Click to expand...
Click to collapse
I think so, if you look at the github comments there is a huawei phone having the same problem, so as long as a phone is having problems it should get fixed
We would like some screenshots to see if this is real @AndDiSa @rcstar6696 @phhusson @MishaalRahman
Just installed it, attached a few screenshots. Haven't tested it a lot, but it boots.
Wie are Not joking, its real ??
Delete, double post
I will be getting my Mediapad M5 8.4 tomorrow and will be flashing the AOSP treble build straight away. Just a heads up a updated build has just been posted with some Huawei related fixes.
i flash it now, and give feedback tomorrow
I flashed the new one with gapps and su, and for the sht-l09 there is no working bluetooth, so that's as far as I go. It will be nice when the BT is fixed for this device.
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
florian-m19 said:
Works good with dirty flash, Home Button is working now and also Automatic Brightness, but battery draining is really high and it gets hot.
Click to expand...
Click to collapse
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
darren1 said:
Have you tried changing the cpu governor? Is it set to something like interactive? I got my Mediapad today but I am waiting for the bootloader unlock code from Huawei.
Click to expand...
Click to collapse
yes it is on interactive, should i change this ?
florian-m19 said:
yes it is on interactive, should i change this ?
Click to expand...
Click to collapse
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
darren1 said:
Might be worth experimenting with. Try conservative or ondemand if they are available. You can always change back if it doesn't make any difference.
Click to expand...
Click to collapse
okay i change it in helix engine to ondemand and the suspend engine is now on powersafe.
All Download Links Are In The End Of Article.
Video Link -
credits and a lot of thanks
_ juanan
_ ANDROID Pie #9.0 telegram link
_Rosyavgconsumer
_ subdragonzj
_Mr shubam
And all others
Contact for further help.
#androidpie
#androidPonredmi5
Bugs - Camera doesn't work
Can't reboot
Fingerprint doesn't work
It blaster doesn't work
Requirements:-
1) Redmi 5 with Bootloader unlocked and TWRP installed (of course)
2) 2GB Internet data
3) 4GB storage
4) Patience
5) 30-45mins time
What to download;-
1) Mookee Rom
2)Vendor Fix
3)Boot image
4)PR-1 GSI(extract the downloaded zip)
5)Post 1-3 zips
6)Lag fix zip
7)Update Gms apk
8)Magisk (If you want to use root) download from google
Steps to install:-
1) Install TWRP treble recovery (how to install treble recovery on redmi 5)
2) Install Mookee ROM
3) Install vendor.img (select vendor image partition in Install image option)
4)install boot.img(select boot partition in Install image option)
5)Once done then reboot and wait for the ROM to boot. Just complete the default setup and now again reboot to PBRP
6)Wipe data only in advance wipe option.
7)Now Now install the extracted PR-1 GSI and install it and image (select system image partition)
8)Wait for it to install.
9) Now go to mount and Mount vendor
10)Now install post GSI zip in the order of 1-2-3
11) Now install Pr-1 Lagfix.
12) Now Install Magisk (if you want)
13) Now reboot
NOTE:-
In few seconds if you did not pass the MIUI boot logo or you were kicked to recovery or fastboot mode then you did not follow above steps correctly see what you missed now clean everything and start from step 1 again. So if you don’t want this to happen do step by step as mentioned.
14) if you see a Google boot animation then wait for 2 mins or a bit more long.
15) It may boot up and show lockscreen if not it will show a black screen.
Wait for few seconds it may auto reboot if not do force reboot.
16)Repeat step 14 till you see a lockscreen
If you are lucky then you will see the lockscreen in few reboots. If not lucky then it wont pass the black screen even after 30 reboots.
17) if it boots then great
now there are few more steps to make it usable.
Tips after it boots:-
1) Once in boots up immediately go to settings and go to display settings and go to Ambient Display and turn off everything immediately (within 1 minute of boot)
2)Don’t do heavy tasking as the ROM is a bit unstable.
3)Don’t even think of rebooting the ROM.(it will never boot again<will stay on blackscreen> there is some boot problem).
4)While installation don’t install any additional zip files.
Except the mentioned one.
Note:-
Bugs are same as Oreo ROM only few extra bugs like boot problem and volte( In P semi GSI group don’t ask about volte fix they will give instant ban)
If you have followed above steps correctly then you must be tasting the pie.
5) You still won’t be able to install login to google account so install the GMS APK now you can login after installation
6)You will see 3 annoying notification in status bar to fix it.
Go to app settings and search for Pixel setup and disable it.
Now search for Google Play Store in app settings in settings and and click notifications and uncheck the unlisted notification.
Now the ROM is ready to use..
Enjoy….
**Notice!! Sorry for Shrink URLs. The developer wants to earn some how so he is using those links. I'm not the developer of this ROM!! I have shared this ROM. Hit that thanks logo if this ROM helped**
Download Links
Mokee ROM -
Vendor.img -
PR-1 GSI(extract the downloaded zip) -
Post 1-3 zips -
Boot.img -
pr1-lag fix -
P Camera Fix -
Install Treble Recovery On Redmi 5 - http://www.fahadpardesi.ga/2018/08/19/treble-recovery-for-redmi-5/
MOD EDIT Links removed thread closed https://forum.xda-developers.com/showpost.php?p=77777476&postcount=29
this is really awesome i hope all bugs get fixed soon
---------- Post added at 02:22 PM ---------- Previous post was at 02:04 PM ----------
also can you please show more details on bugs i mean are you sure that there are no other bugs, because if it's only those then really it's not that much of a problem i mean most people will try it
I'm not sure.
driton.talinoci said:
this is really awesome i hope all bugs get fixed soon
---------- Post added at 02:22 PM ---------- Previous post was at 02:04 PM ----------
also can you please show more details on bugs i mean are you sure that there are no other bugs, because if it's only those then really it's not that much of a problem i mean most people will try it
Click to expand...
Click to collapse
Thanks for replying, but I'm not 100% sure leaving these bugs. I tried this on my friend's redmi 5. I'm still waiting for my redmi 5's bootloader to be unlocked till September 2. But as soon as I will flash twrp and treble recovery, I will try this ROM and give a review.
As my friend wanted to use his phone normally, he flashed other ROM... The bugs that I mentioned are main bugs. Didn't got enough time to test it. So sorry about it.
I will tell u soon.
AP hacker said:
Thanks for replying, but I'm not 100% sure leaving these bugs. I tried this on my friend's redmi 5. I'm still waiting for my redmi 5's bootloader to be unlocked till September 2. But as soon as I will flash twrp and treble recovery, I will try this ROM and give a review.
As my friend wanted to use his phone normally, he flashed other ROM... The bugs that I mentioned are main bugs. Didn't got enough time to test it. So sorry about it.
I will tell u soon.
Click to expand...
Click to collapse
thank you very much please keep us updated for new bug fixes or new versions
driton.talinoci said:
thank you very much please keep us updated for new bug fixes or new versions
Click to expand...
Click to collapse
Sure! I will..
MakeRosyGreatAgain
#MakeRosyGreatAgain
AP hacker said:
Sure! I will..
Click to expand...
Click to collapse
Hey I was not on xda from a long time
Today when I came back I came to know about this thread
If not wrong you are fahad?
In the telegram group Aragon repeatedly told you not to make short links but you did it
Now I have reported this thread to the moderator
And it will be deleted soon
My point is not to give a bad statement rather everyone said don't try to earn money from others work
That's all
I'm not fahad
Shreejoy Dash said:
Hey I was not on xda from a long time
Today when I came back I came to know about this thread
If not wrong you are fahad?
In the telegram group Aragon repeatedly told you not to make short links but you did it
Now I have reported this thread to the moderator
And it will be deleted soon
My point is not to give a bad statement rather everyone said don't try to earn money from others work
That's all
Click to expand...
Click to collapse
nah man, I'm not fahad.. I'm just sharing this ROM from his site.. I have nothing to do with it.
Camera Fix patch link does not work
any new updates on the rom, can someone confirm whether wifi, mobile data and other important things work, is there a new version that fixes the camera and fingerprint cuz those are the 2 main bugs from what i see from the thread cuz ir blaster isn't really important while reboot is important is it though not neccessary
Great!I wil wait for version with fixed bugs
Can we flash oreo GSIs using this method?
hey bro any fixes, is fingerprint fixed cuz that's the biggest bug now since we have a camera fix but i think the link is broken, anyway please keep us updated
driton.talinoci said:
any new updates on the rom, can someone confirm whether wifi, mobile data and other important things work, is there a new version that fixes the camera and fingerprint cuz those are the 2 main bugs from what i see from the thread cuz ir blaster isn't really important while reboot is important is it though not neccessary
Click to expand...
Click to collapse
Bro I suggest u to flash android 8.1 mokee ROM it's stable than this.
AP hacker said:
Bro I suggest u to flash android 8.1 mokee ROM it's stable than this.
Click to expand...
Click to collapse
yeah i know but i like android pie much more, that's why i wanna be kept updated to when the fingerprint and reboot get fixed
Any fix?for rebot and fg?
yeah is there any fix to fingerprint and reboot, and camera also, because if those bugs get fixed then this rom would really be awesome
No..
driton.talinoci said:
yeah is there any fix to fingerprint and reboot, and camera also, because if those bugs get fixed then this rom would really be awesome
Click to expand...
Click to collapse
Sadly no.... And! I have another Aosp Experience 9.0.. I will post it in Redmi 5 ROMs section ok?
It also has bugs like fingerprint and ir not working..
AP hacker said:
Sadly no.... And! I have another Aosp Experience 9.0.. I will post it in Redmi 5 ROMs section ok?
It also has bugs like fingerprint and ir not working..
Click to expand...
Click to collapse
yes please, post any rom that you have for our redmi 5 (rosy), we really need roms and also please keep us updated on bugfixes for all the roms you publish here ok?, we're counting on you
Use it at your own risk! (Don't flash it on any Q ROMs)The dtbo.img is extracted from the Chinese version of miui 9.8.15,so you better use version 9.8.15 or later,.Some people use 84hz not smooth,75hz is the best option,but i used 84hz and it's perfect for me! so what are you waiting for? this zip include 66hz-72hz-75hz-84hz
-Download the attached zip, unzip it
-Open TWRP
-Backup your dtbo partition
-Select the corresponding dtboxx.img,choose the dtbo partition,the flash it
-Reboot
You should see the changes immediately after the restart. It's way smoother than before.
If you want to go back to default, restore your dtbo partition backup or flash the dtbo60
https://drive.google.com/file/d/1BsFEx4x1XDe1MQfqhDsBYHRdLsAJj8rk/view?usp=sharing
Join the telegram an get the new file and new phone screen oc:
https://t.me/LenScreenOC
Or add my QQ number to get support (always on line):1403727621
72 hz is actually working on the latest mui 12 beta.
But I noticed that there is something less beautiful in the color of the screen.
It's less colorful and more "white" I don't know how to describe.
So I don't recommend to use this mod, u will lose some quality on your screen
HelloRickyLee said:
Use it at your own risk! (Don't flash it on any Q ROMs)The dtbo.img is extracted from the Chinese version of miui 9.8.15,so you better use version 9.8.15 or later,.Some people use 84hz not smooth,75hz is the best option,but i used 84hz and it's perfect for me! so what are you waiting for? this zip include 66hz-72hz-75hz-84hz
-Download the attached zip, unzip it
-Open TWRP
-Backup your dtbo partition
-Select the corresponding dtboxx.img,choose the dtbo partition,the flash it
-Reboot
You should see the changes immediately after the restart. It's way smoother than before.
If you want to go back to default, restore your dtbo partition backup or flash the dtbo60
https://drive.google.com/file/d/1BsFEx4x1XDe1MQfqhDsBYHRdLsAJj8rk/view?usp=sharing
Join the telegram an get the new file and new phone screen oc:
https://t.me/LenScreenOC
Or add my QQ number to get support (always on line):1403727621
Click to expand...
Click to collapse
Is it bad for the device to do that?
thanks bro
is this working with miui 11 beta ?
hi
Hungry_muffin said:
Is it bad for the device to do that?
Click to expand...
Click to collapse
Yes, this will kill your battery quickly !
As he said : use it at your own risk ! (Why people never read the OP???)
gringo80 said:
Yes, this will kill your battery quickly !
As he said : use it at your own risk ! (Why people never read the OP???)
Click to expand...
Click to collapse
I meant if maby it can cause some problems like lags, freezing, etc.
I always read the OP :3
Hungry_muffin said:
I meant if maby it can cause some problems like lags, freezing, etc.
I always read the OP :3
Click to expand...
Click to collapse
The only working very well for me is the 84hz... others lag.
but twrp will freeze whatever the version you chose. better to stay in 60hz or flash 84hz if you want but keep in mind that if you want going to twrp you must go to bootloader and flash your original dtbo.img
gringo80 said:
The only working very well for me is the 84hz... others lag.
but twrp will freeze whatever the version you chose. better to stay in 60hz or flash 84hz if you want but keep in mind that if you want going to twrp you must go to bootloader and flash your original dtbo.img
Click to expand...
Click to collapse
Works till I lock my phone.
Then it doesn't turn on and I must press volume + and power key to go back at 60hz
Doesn't work any version for me :/
I'm using this mod with Miui 11 based on Android Q for cc9, and everything work smoth on 72 and 84hz ?
Also works for my Mi 9 Lite with MIUI 11.3.3(84hz).
Thanks HelloRickyLee
---------- Post added at 03:46 PM ---------- Previous post was at 03:46 PM ----------
Also works for my Mi 9 Lite with MIUI 11.3.3(84hz).
Thanks HelloRickyLee
Still not working for me
It freezes my device so im back to 60hz
Any issues?
I'm running 72hz smooth for about one week, but 75hz won't work and 84Hz work without issues
Stefke93 said:
I'm running 72hz smooth for about one week, but 75hz won't work and 84Hz work without issues
Click to expand...
Click to collapse
What rom you have?
84mhz works on Android q? I have xiaomi.eu 9.11.28
72hz is working perfectly with the latest Pixel Experience Android 10, the highers aren't.
I think you need to disable the screensaver, otherwise the phone turns off once you lock it
VyktorJonas said:
72hz is working perfectly with the latest Pixel Experience Android 10, the highers aren't.
I think you need to disable the screensaver, otherwise the phone turns off once you lock it
Click to expand...
Click to collapse
yap…thats what i face……lock once thne need to force reboot or got dead phone :( how to disable it
FuLuLu said:
yap…thats what i face……lock once thne need to force reboot or got dead phone :( how to disable it
Click to expand...
Click to collapse
you can flash your ROM's stock dtbo back
VyktorJonas said:
you can flash your ROM's stock dtbo back
Click to expand...
Click to collapse
but do that will got 60fps…any other way got 84fps and disable it?
problem I see is that the minimum sound with dolby activated is very high and if you turn it off you don't hear the music apps, any way to lower the minimum volume?
FuLuLu said:
but do that will got 60fps…any other way got 84fps and disable it?
Click to expand...
Click to collapse
No idea, I believe OP extracted the DTBO file from the official ROM and editted it in order to overclock the screen, something tells me it's not hard, but personally I've got no idea how to do it so props to him
Using GSIs means you're using your stock DTBO, so theorically, it should just work
Hey guys I found a build of android 10 and it's stable for WHYRED only bug I found is night mod .
https://sourceforge.net/projects/sh...om-10.0-whyred-OFFICIAL-20190917.zip/download
I am note developer of this rom so don't ask stupid questions XD
Only kernel work on android 10 is pure CAF x11
Flash magisk 19.4 after flash ROM . Otherwise your phone going too boot loop.
Have good days with it ?
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Bruh.
Hardly roms are being out and you want a stable one
Wait for another 2 months for a good one to be out!
This Post was sent from a Script by @baalajimaestro
0veR said:
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
Click to expand...
Click to collapse
Tell me the bugs ? I didn't face any one . Just volte didn't work for me and ROM have good speed .
shea83 said:
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
Click to expand...
Click to collapse
I didn't face any reboot . I have note 5 ai global
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
How did you enable volte in this rom ? My operator have volte but not working !
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
Link please?
harigavara said:
Link please?
Click to expand...
Click to collapse
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
No need gapps?
Installation instructions please?
ali.damiri said:
How did you enable volte in this rom ? My operator have volte but not working !
Click to expand...
Click to collapse
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
harigavara said:
No need gapps?
Installation instructions please?
Click to expand...
Click to collapse
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
Thank you. Bluetooth is working?
Did you see any bugs till?
xell75 said:
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
Click to expand...
Click to collapse
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
The only bug I have found for 2 days of usage is that night mode is not working
I had bootloop with that rom. I'm gonna try installing OP's rom and then updating
harigavara said:
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
Click to expand...
Click to collapse
Is your storage encrypted?
The rom is very smooth. Using for about 12 hours and no problems. It's like a pixel with sd card slot.
xell75 said:
Is your storage encrypted?
Click to expand...
Click to collapse
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
harigavara said:
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
Click to expand...
Click to collapse
You have to format data (not just wipe) to delete encryption, this will of course wipe your internal storage, so backup it id needed. Then it should boot.