All Download Links Are In The End Of Article.
Video Link -
credits and a lot of thanks
_ juanan
_ ANDROID Pie #9.0 telegram link
_Rosyavgconsumer
_ subdragonzj
_Mr shubam
And all others
Contact for further help.
#androidpie
#androidPonredmi5
Bugs - Camera doesn't work
Can't reboot
Fingerprint doesn't work
It blaster doesn't work
Requirements:-
1) Redmi 5 with Bootloader unlocked and TWRP installed (of course)
2) 2GB Internet data
3) 4GB storage
4) Patience
5) 30-45mins time
What to download;-
1) Mookee Rom
2)Vendor Fix
3)Boot image
4)PR-1 GSI(extract the downloaded zip)
5)Post 1-3 zips
6)Lag fix zip
7)Update Gms apk
8)Magisk (If you want to use root) download from google
Steps to install:-
1) Install TWRP treble recovery (how to install treble recovery on redmi 5)
2) Install Mookee ROM
3) Install vendor.img (select vendor image partition in Install image option)
4)install boot.img(select boot partition in Install image option)
5)Once done then reboot and wait for the ROM to boot. Just complete the default setup and now again reboot to PBRP
6)Wipe data only in advance wipe option.
7)Now Now install the extracted PR-1 GSI and install it and image (select system image partition)
8)Wait for it to install.
9) Now go to mount and Mount vendor
10)Now install post GSI zip in the order of 1-2-3
11) Now install Pr-1 Lagfix.
12) Now Install Magisk (if you want)
13) Now reboot
NOTE:-
In few seconds if you did not pass the MIUI boot logo or you were kicked to recovery or fastboot mode then you did not follow above steps correctly see what you missed now clean everything and start from step 1 again. So if you don’t want this to happen do step by step as mentioned.
14) if you see a Google boot animation then wait for 2 mins or a bit more long.
15) It may boot up and show lockscreen if not it will show a black screen.
Wait for few seconds it may auto reboot if not do force reboot.
16)Repeat step 14 till you see a lockscreen
If you are lucky then you will see the lockscreen in few reboots. If not lucky then it wont pass the black screen even after 30 reboots.
17) if it boots then great
now there are few more steps to make it usable.
Tips after it boots:-
1) Once in boots up immediately go to settings and go to display settings and go to Ambient Display and turn off everything immediately (within 1 minute of boot)
2)Don’t do heavy tasking as the ROM is a bit unstable.
3)Don’t even think of rebooting the ROM.(it will never boot again<will stay on blackscreen> there is some boot problem).
4)While installation don’t install any additional zip files.
Except the mentioned one.
Note:-
Bugs are same as Oreo ROM only few extra bugs like boot problem and volte( In P semi GSI group don’t ask about volte fix they will give instant ban)
If you have followed above steps correctly then you must be tasting the pie.
5) You still won’t be able to install login to google account so install the GMS APK now you can login after installation
6)You will see 3 annoying notification in status bar to fix it.
Go to app settings and search for Pixel setup and disable it.
Now search for Google Play Store in app settings in settings and and click notifications and uncheck the unlisted notification.
Now the ROM is ready to use..
Enjoy….
**Notice!! Sorry for Shrink URLs. The developer wants to earn some how so he is using those links. I'm not the developer of this ROM!! I have shared this ROM. Hit that thanks logo if this ROM helped**
Download Links
Mokee ROM -
Vendor.img -
PR-1 GSI(extract the downloaded zip) -
Post 1-3 zips -
Boot.img -
pr1-lag fix -
P Camera Fix -
Install Treble Recovery On Redmi 5 - http://www.fahadpardesi.ga/2018/08/19/treble-recovery-for-redmi-5/
MOD EDIT Links removed thread closed https://forum.xda-developers.com/showpost.php?p=77777476&postcount=29
this is really awesome i hope all bugs get fixed soon
---------- Post added at 02:22 PM ---------- Previous post was at 02:04 PM ----------
also can you please show more details on bugs i mean are you sure that there are no other bugs, because if it's only those then really it's not that much of a problem i mean most people will try it
I'm not sure.
driton.talinoci said:
this is really awesome i hope all bugs get fixed soon
---------- Post added at 02:22 PM ---------- Previous post was at 02:04 PM ----------
also can you please show more details on bugs i mean are you sure that there are no other bugs, because if it's only those then really it's not that much of a problem i mean most people will try it
Click to expand...
Click to collapse
Thanks for replying, but I'm not 100% sure leaving these bugs. I tried this on my friend's redmi 5. I'm still waiting for my redmi 5's bootloader to be unlocked till September 2. But as soon as I will flash twrp and treble recovery, I will try this ROM and give a review.
As my friend wanted to use his phone normally, he flashed other ROM... The bugs that I mentioned are main bugs. Didn't got enough time to test it. So sorry about it.
I will tell u soon.
AP hacker said:
Thanks for replying, but I'm not 100% sure leaving these bugs. I tried this on my friend's redmi 5. I'm still waiting for my redmi 5's bootloader to be unlocked till September 2. But as soon as I will flash twrp and treble recovery, I will try this ROM and give a review.
As my friend wanted to use his phone normally, he flashed other ROM... The bugs that I mentioned are main bugs. Didn't got enough time to test it. So sorry about it.
I will tell u soon.
Click to expand...
Click to collapse
thank you very much please keep us updated for new bug fixes or new versions
driton.talinoci said:
thank you very much please keep us updated for new bug fixes or new versions
Click to expand...
Click to collapse
Sure! I will..
MakeRosyGreatAgain
#MakeRosyGreatAgain
AP hacker said:
Sure! I will..
Click to expand...
Click to collapse
Hey I was not on xda from a long time
Today when I came back I came to know about this thread
If not wrong you are fahad?
In the telegram group Aragon repeatedly told you not to make short links but you did it
Now I have reported this thread to the moderator
And it will be deleted soon
My point is not to give a bad statement rather everyone said don't try to earn money from others work
That's all
I'm not fahad
Shreejoy Dash said:
Hey I was not on xda from a long time
Today when I came back I came to know about this thread
If not wrong you are fahad?
In the telegram group Aragon repeatedly told you not to make short links but you did it
Now I have reported this thread to the moderator
And it will be deleted soon
My point is not to give a bad statement rather everyone said don't try to earn money from others work
That's all
Click to expand...
Click to collapse
nah man, I'm not fahad.. I'm just sharing this ROM from his site.. I have nothing to do with it.
Camera Fix patch link does not work
any new updates on the rom, can someone confirm whether wifi, mobile data and other important things work, is there a new version that fixes the camera and fingerprint cuz those are the 2 main bugs from what i see from the thread cuz ir blaster isn't really important while reboot is important is it though not neccessary
Great!I wil wait for version with fixed bugs
Can we flash oreo GSIs using this method?
hey bro any fixes, is fingerprint fixed cuz that's the biggest bug now since we have a camera fix but i think the link is broken, anyway please keep us updated
driton.talinoci said:
any new updates on the rom, can someone confirm whether wifi, mobile data and other important things work, is there a new version that fixes the camera and fingerprint cuz those are the 2 main bugs from what i see from the thread cuz ir blaster isn't really important while reboot is important is it though not neccessary
Click to expand...
Click to collapse
Bro I suggest u to flash android 8.1 mokee ROM it's stable than this.
AP hacker said:
Bro I suggest u to flash android 8.1 mokee ROM it's stable than this.
Click to expand...
Click to collapse
yeah i know but i like android pie much more, that's why i wanna be kept updated to when the fingerprint and reboot get fixed
Any fix?for rebot and fg?
yeah is there any fix to fingerprint and reboot, and camera also, because if those bugs get fixed then this rom would really be awesome
No..
driton.talinoci said:
yeah is there any fix to fingerprint and reboot, and camera also, because if those bugs get fixed then this rom would really be awesome
Click to expand...
Click to collapse
Sadly no.... And! I have another Aosp Experience 9.0.. I will post it in Redmi 5 ROMs section ok?
It also has bugs like fingerprint and ir not working..
AP hacker said:
Sadly no.... And! I have another Aosp Experience 9.0.. I will post it in Redmi 5 ROMs section ok?
It also has bugs like fingerprint and ir not working..
Click to expand...
Click to collapse
yes please, post any rom that you have for our redmi 5 (rosy), we really need roms and also please keep us updated on bugfixes for all the roms you publish here ok?, we're counting on you
Related
With a team effort from myself and @tdunham I'm back again with a completely stock build of Android TW-Lollipop 5.1.1 (N920PVPU1AOGD) for the Sprint Samsung Galaxy Note 5.. I built this stock pre-rooted ROM using the official Samsung tar ball. The ROM will self root upon flash and it has init.d/busybox support (when custom kernels support it). Knox and Sprint Itson has been removed completely. It is completely stock with all of the original factory installed apps as well as a few added features. This build contains a fully deodexed framework and system apps.
Other than the removal of Knox and Sprint Itson, it is stock in almost every other way. This first build is stock and will stay that way. I may make a custom rom later on. This ROM is intended for people who want the stock rom in it's original form with the addition of root and removal of Knox & itson, as well as other members who need a good solid base for their rom projects. I give permission for other dev's to use this rom as your base and I highly recommend that you do so because it is bug-free and built from the official Samsung tar ball. However I do expect proper credit if you use this rom for any other project. If you discover any issues please send me a PM as I may not continuously monitor this thread. If you like my work please press that Thanks button, rate this thread, and consider a kind donation! Enjoy!
About ROM:
Android 5.1.1 N920PVPU1AOGD_N920PSPT1AOGD_SPR
Stock N920PVPU1AOGD kernel (root-permissive) by: @Manh_IT
All factory installed apps including the Sprint Setup Wizard, etc are included. Nothing was removed except...
Knox and Sprint Itson removed.
Hotspot mod enabled
Added camera shutter sound option in camera settings
Added call/message block in settings
Enabled call recording from the phone dialer
Private mode works out of the box
That's about it... for now. This should be as close to the original rom as possible.
Known issue:
tx_dbs_tx said:
I just wanted to let people know that Sprint "ID" is causing Carrier Setup Wizard to fc as well as ID itself. This is a known issue and it is caused by Sprint "ID". I have not been able to successfully deodex it. The apk doesn't like to be deodexed. Until ID has an update through Google Play or Sprint Zone I will not be able to update it in the rom. Once there's an update to ID please send me a PM and I will update the rom. Until then you will have to delete or freeze Sprint "ID" to stop the fc's. Sorry for this inconvenience. It is out of my control at this time.
Click to expand...
Click to collapse
If you are currently on the stock unrooted rom:
You ONLY need to flash the latest TWRP recovery ( for the N920P ) using odin on your pc. Nothing else. Then flash this rom afterwards. The ROM zip will pre-root your phone as well as flash the stock root-permissive OGD kernel by @Manh_IT
Flashing instructions: ***Before beginning the flash/setup process MAKE SURE your battery has at least 50% charge and/or connected to the charger!!!***
1. Backup anything you don't want to lose off your internal device storage to another location just to be safe.
2. Download the rom using your pc. (downloading with your phone has a much higher risk of file corruption. Not recommended with large files).
3. VERIFY the md5!!! Once the download has finished, compare the AFH md5 using a md5 tool on your pc. (Google "md5 checksum windows").
4. Put the downloaded rom onto your internal storage..
5. With phone powered off, reboot into recovery by pressing and holding volume up, power and the home button until you see the Samsung logo then release all buttons.
6. Once in recovery choose the wipe button and do a factory reset three times. Optional but recommended is to wipe "Data". This will wipe all of your user data such as google accounts so MAKE SURE you backed up first like I said in step #1 above! Next go to "advanced wipe" and select all of the partitions EXCEPT internal storage. Wiping Internal storage is optional but recommended in certain circumstances. The reason is to remove left-over data from previous version of Android and start with a clean slate.
7. Choose the "Install" option and select the rom "Sprint_Hybrid_N920PSPT1AOGD" from your internal storage. It will flash the rom and give a confirmation once completed.
8. Press "Reboot" then "reboot system". You should get no prompts or warnings about not having root.
9. Initial rom "optimization" may take several minutes while ART builds its cache and the phone will remain on the yellow Sprint Spark screen for about 8 to 10 minutes. Let the phone optimize for at least 10 minutes and the screen WILL eventually turn off or show the setup wizard once it finishes. If the screen turns off then simply turn it on and proceed to setup your phone.
10. Once finished with the setup wizard, wait a few moments and the phone will automatically install the Sprint apps. (I know... nobody likes that suff!) You must either "accept" or "disagree" with each and every google prompt for these apps or else the installs pause until you do so.. That's it! You're done!
flashing anything on your device is done at your own risk. There is no way myself or any other developer can guarantee that flashing this ROM or any other file will not brick your device or otherwise cause some other type of damage. This is just a standard warning. I am not responsible for anything that you do to your device.
Credits:[CENTER @tdunham for his initial kitchen updater script and his willingness to work together with me so we could tag team the initial dev'ing and testing phase. I must say it was a pleasure!
the same awesome group of testers which also are credited in T's OGD ROM thread found HERE. @Team DevDigitel @Chaz187 @fsunoles101 @JoeyDuran @GAPO @rlmiller @sml2004
Special thanks to: @Beastmode Brian for providing the updated google apk's i needed. Thanks a lot man!
If somebody was left out please let me know!
[/CENTER]
DOWNLOADSprint Stock N920PSPT1AOGD DeodexedEnjoy!!!.
XDA:DevDB Information
Sprint_Hybrid_N920PSPT1AOGD, ROM for the Sprint Samsung Galaxy Note5
Contributors
tx_dbs_tx, @tdunham @Team DevDigitel
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N920PSPT1AOGD
Based On: N920PVPU1AOGD_N920PSPT1AOGD_N920PVPU1AOGD_HOME.tar
Version Information
Status: Stable
Stable Release Date: 2015-09-06
Created 2015-09-03
Last Updated 2015-09-09
Mods
N920PVPU1AOGD_Odexed-Deodexed_Hotspot_Mod
(can be flashed on odexed or deodexed OGD roms. the script will remove appropriate odex files automatically)
Reserved
Nice man congrats on the release..... Glad to see sprint getting some love! !!!!
You moved over to the 5, Sweet!!!!!?
Ok, now I really need root!
The mans in the house thanks bro
Sent from my SM-N920P using XDA Premium HD app
So glad to see develpment starting to move along. Thank you so much for this. Awesome job.
Sent from my SM-N920P using Tapatalk
Rom doesnt get passed the sprint boot screen waitied 15 minutes it just randomly rebooted
Sent from my SM-N920P using XDA Premium HD app
pbedard said:
Rom doesnt get passed the sprint boot screen waitied 15 minutes it just randomly rebooted
Sent from my SM-N920P using XDA Premium HD app
Click to expand...
Click to collapse
I just slammed my brake when I say this. I'll till this issue is resolved.
pbedard said:
Rom doesnt get passed the sprint boot screen waitied 15 minutes it just randomly rebooted
Sent from my SM-N920P using XDA Premium HD app
Click to expand...
Click to collapse
Did u download the ROM on ur phone? If so, u still have to verify the MD5. One thing about DBS ROMs is a completely clean slate is best. I would re-download the ROM on computer the verify and move to internal storage. U have a backup to go to JIC?
M2Iceman said:
You moved over to the 5, Sweet!!!!!?
Ok, now I really need root!
Click to expand...
Click to collapse
No I don't have the Note 5. I was invited to come help with the new stock base rom and thisis simply my own version with everything left in the rom and is hybrid odexed/deodexed.
Can somebody please download, verify md5 and test flash for me. I need to make sure there's not a problem with the rom. I need a comfirmation from a couple of people wether you successfully boot or not. Thank you.
tx_dbs_tx said:
No I don't have the Note 5. I was invited to come help with the new stock base rom and thisis simply my own version with everything left in the rom and is hybrid odexed/deodexed.
Can somebody please download, verify md5 and test flash for me. I need to make sure there's not a problem with the rom. I need a comfirmation from a couple of people wether you successfully boot or not. Thank you.
Click to expand...
Click to collapse
The md5 matched, but I'm also getting a failed boot at the spark screen. sits on it for a good 10 minutes, reboots, then does it again.
Do you care if i use this as a base? Gonna go through and pull bloat for the lazys and reup it.. credits due of course for your orginial work. Lmk
Thanks for the build. Gonna run in as soon as the dl finishes
So being that this is odex and deodexed and some system apps aren't deodexed, will xposed work with this rom?
tx_dbs_tx , Original poster is correct, flashed 3 times 3 dls, no go,, same result long wait on spark logo, random reboot and restarts again, wont fully boot as is
Team DevDigitel said:
Do you care if i use this as a base? Gonna go through and pull bloat for the lazys and reup it.. credits due of course for your orginial work. Lmk
Thanks for the build. Gonna run in as soon as the dl finishes
Click to expand...
Click to collapse
Hit me up on Hangouts if you can. [email protected]
If you have time you can help me test to find the problem. I can tell you exactly what to do to find the cause and you won't have to re-download the rom.
Sorry about this people. I don't have the Note 5 so I couldn't flash & test this build which is based off of our original test roms which are good to go. I made some changes, updated some framework files and re-uploaded this version and it's not booting. In the meantime I have to pull the download/link until i find and fix the problem. If anyone can help me test the rom, please contact me on google hangouts using my email address above. Thank you.
tx_dbs_tx said:
Hit me up on Hangouts if you can. [email protected]
If you have time you can help me test to find the problem. I can tell you exactly what to do to find the cause and you won't have to re-download the rom.
Sorry about this people. I don't have the Note 5 so I couldn't flash & test this build which is based off of our original test roms which are good to go. I made some changes, updated some framework files and re-uploaded this version and it's not booting. In the meantime I have to pull the download/link until i find and fix the problem. If anyone can help me test the rom, please contact me on google hangouts using my email address above. Thank you.
Click to expand...
Click to collapse
Any way to get that kernel? I think the Noble kernel is crashing my phone. Sprint Note 5
My is crashing. Every time i use hotspot
Jordan011 said:
Any way to get that kernel? I think the Noble kernel is crashing my phone. Sprint Note 5
Click to expand...
Click to collapse
A couple of people are currently working on the stock OGD root-permissive kernel. When they release it for testing or final build, i will include it in the rom. However I don't think the current kernel is the problem.
I sent an invite but I can't test until tomorrow I left my damn computer at work. But if you ever need some one to test something let me know, I'll gladly risk my device! Haha
XC/KUGO/F5321 OmniROM BUILDS
OREO 8.1
DOWNLOAD WEEKLY
REQUIREMENTS TO SUCCESSFULLY FLASH OMNIROM:
1. The device has the latest stock ftf
2. The device has an unlocked bootloader
3. The ODM image zip has been downloaded from HERE, and the ODM image has been extracted from it
4. The WEEKLY zip file has been downloaded and copied to the device
INSTALLATION INSTRUCTIONS:
1. Reboot device to fastboot mode, and flash the ODM image with this command
Code:
fastboot flash oem <ODM image>
2. Reboot device to TWRP and flash the WEEKLY zip file
3. (Optional) Flash a gapps package
4. Reboot device to system
CURRENT ISSUES ON OFFICIAL:
1. No USB tethering
2. Wifi sometimes fails to turn on
KERNEL SOURCE: https://github.com/omnirom/android_kernel_sony_msm/tree/android-8.1
BUG REPORTS
REPORT BUGS ONLY:
- AFTER A CLEAN INSTALL
- USING STOCK OMNI KERNEL
- NO MODS OF ANY SORT
OMNI GERRIT REVIEW
https://gerrit.omnirom.org/
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
XDA:DevDB Information
[ROM][XC][O][8.1][WEEKLY]OmniROM, ROM for the Sony Xperia X Compact
Contributors
oshmoun, humberos
Source Code: https://github.com/omnirom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: latest stock ftf
Version Information
Status: Beta
Created 2018-01-14
Last Updated 2018-11-03
Awesome!! Thank you very much, I'll be trying this out immediately!
oshmoun said:
XC/KUGO/F5321 OmniROM BUILDS
OREO 8.1
Click to expand...
Click to collapse
So far so good. Using Magisk root, and Xposed beta, and micro g, and all working well. WiFi did disconnect once so far. Hopefully a fix coming... Thanks
@oshmoun - can you add option to switch nav buttons, or enable nav bar tuner? I can't get my apktool working on O, and no Gravitybox for O yet either...
levone1 said:
So far so good. Using Magisk root, and Xposed beta, and micro g, and all working well. WiFi did disconnect once so far. Hopefully a fix coming... Thanks
@oshmoun - can you add option to switch nav buttons, or enable nav bar tuner? I can't get my apktool working on O, and no Gravitybox for O yet either...
Click to expand...
Click to collapse
Try this: https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner
I can register new fingerprints, but i cant use them to unlock my phone or to login on apps.
I installed TWRP https://forum.xda-developers.com/x-compact/development/recovery-twrp-3-1-1-xperia-x-compact-t3640914, the OEM image and I'm testing OmniROM now, thanks for your work, where can I report bugs?
OmniROM work greatly on my device, I'm using since 14 Jan without any problem! Really Thanks!
coderex96 said:
I installed TWRP https://forum.xda-developers.com/x-...ecovery-twrp-3-1-1-xperia-x-compact-t3640914, the OEM image and I'm testing OmniROM now, thanks for your work, where can I report bugs?
Click to expand...
Click to collapse
Here only. With logs if possible.
farfetch said:
Try this: https://play.google.com/store/apps/details?id=xyz.paphonb.systemuituner
Click to expand...
Click to collapse
Oh yeah, I actually have that in my downloads already. Forgot about it... Thanks
---------- Post added at 12:54 PM ---------- Previous post was at 12:51 PM ----------
Lost mobile data today. At first boot, working fine, then installed AfWall and changed dns, and still working fine yesterday. Then this morning, no mobile data. Signal shows bars, but no 4g/lte, etc, and won't connect. Tried disabling and uninstalling tweaks and many reboots, but no change.
Update - now it's in and out...
levone1 said:
Oh yeah, I actually have that in my downloads already. Forgot about it... Thanks
---------- Post added at 12:54 PM ---------- Previous post was at 12:51 PM ----------
Lost mobile data today. At first boot, working fine, then installed AfWall and changed dns, and still working fine yesterday. Then this morning, no mobile data. Signal shows bars, but no 4g/lte, etc, and won't connect. Tried disabling and uninstalling tweaks and many reboots, but no change.
Update - now it's in and out...
Click to expand...
Click to collapse
seems to be caused by installing afwall? could you please try without it?
oshmoun said:
seems to be caused by installing afwall? could you please try without it?
Click to expand...
Click to collapse
I am testing now. I haven't checked it enough to saying it's a rom issue; just wondering if anyone else has had it. It worked find with AfWall yesterday, but now in and out. I remember the same issue with AfWall on certain CM 12 roms...
oh man, thanks for making these ROMs, but the updater of 7.1 recommended this update and I just pressed install. Recovering from a brick now…
I'll come back to it later, when I have time for all the prerequisites.
OpenDelta
Nice work. OpenDelta advertised this update which I naturally installed without checking the requirements here. No requirements were stated before the update. Bricked my phone in a place where I couldn't do much about it. Just ask to please be more considerate since I more or less trust the update tool.
FYI: I dirty flashed from 7.1.2 via opendelta too. Once I flashed the oem partition using fastboot, the device booted again (only a handful of apps force closed and needed their data cleared to function properly again). Not the best choice to make this update available for installation with opendelta, no...
edit: forgot to mention I of course also had to update gapps to an 8.1 supporting version. I downloaded an unofficial pico opengapps from here
drstefankrank said:
oh man, thanks for making these ROMs, but the updater of 7.1 recommended this update and I just pressed install. Recovering from a brick now…
I'll come back to it later, when I have time for all the prerequisites.
Click to expand...
Click to collapse
cds0 said:
Nice work. OpenDelta advertised this update which I naturally installed without checking the requirements here. No requirements were stated before the update. Bricked my phone in a place where I couldn't do much about it. Just ask to please be more considerate since I more or less trust the update tool.
Click to expand...
Click to collapse
harryharryharry said:
FYI: I dirty flashed from 7.1.2 via opendelta too. Once I flashed the oem partition using fastboot, the device booted again (only a handful of apps force closed and needed their data cleared to function properly again). Not the best choice to make this update available for installation with opendelta, no...
Click to expand...
Click to collapse
Good to know flashing the odm image helps when updating from 7.1
About opendelta, i don't have much control over it to filter out the 8.1 build. It's all done automatically.
Besides, it did do its job well. It notified about the new version.
The requirement to flash a seperate ODM image is similar to how it's needed to flash a vendor image, and not just system and boot images, on Google devices. Guess that's new for Sony devices, hence this confusion.
@oshmoun - how about kcal support? Here's my tests with kppd - https://forum.xda-developers.com/showpost.php?p=75200267&postcount=64 (and forward)
@oshmoun: Yeah I was kind of surprised to see 8.1 was available through opendelta, and I didn't think it would work. So I backed up everything before upgrading. Which is probably what people should do before upgrading anyway
Flashing the oem partition was a relatively easy fix, so it's all good.
Thanks again for your great work! It's much appreciated as the number of custom roms for kugo is really slim pickings.
Latest stock ftf compatible is 34.3.A.0.252, right?
EDIT: It seems so. Flashed it and this build works great with it, so far.
I've performed a clean install after full wipe and also don't have mobile data working. Wi-Fi works, though.
Strange issue I have is the lack of sound over bluetooth ONLY in calls. Playing music/video works otherwise. It's quite baffling. This was working as expected on 7.1.
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
GAPPS VERSIONS
https://www.androidfilehost.com/?fid=674106145207484591 v.02
https://www.androidfilehost.com/?fid=674106145207484438 v.01
NO GAPPS
https://www.androidfilehost.com/?fid=890278863836283078
Installation
fastboot flash system_a system-arm64-ab.img
or if you want flash no gapps version
fastboot flash system_a system-arm64-nogapps.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
raimondomartire said:
Hello everyone,
here resurrection remix with treble support. This build have:
- GAPPS inside
- Night Light, Auto-Brightness, Ambient Display & more
- Aptx Hd driver
- Lte working
- No audio problem
Link
https://www.androidfilehost.com/?fid=674106145207484438
Installation
fastboot flash system_a system-arm64-ab.img
if you want format your userdate also add fastboot erase userdata or use twrp
CREDITS
@phhusson, @linuxct, @TheCrazyLex, @MishaalRahman
Click to expand...
Click to collapse
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
el4nimal said:
Will I be able to change the refresh rate? If not, is 120hz set to default and using the variable refresh rate feature?
Thanks in advance. I'm really happy to see people working in custom ROMs
Click to expand...
Click to collapse
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
raimondomartire said:
No for now I don't add this option in settings. I don't have a lot of times so update rom when possible.
Click to expand...
Click to collapse
Is there any file I can modify in order to change it? I just want to set my display to 120hz
el4nimal said:
Is there any file I can modify in order to change it? I just want to set my display to 120hz
Click to expand...
Click to collapse
Your display on all treble roms is always on 120 Hz. You can't switch to 60 or 90. So I must add an option on settings like stock rom
Thanks a lot for your work in putting this together!
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
BakaSenpai said:
How would we get root? I'm trying to use the LOS add-on, but root-checker says I don't have root.
Click to expand...
Click to collapse
On this rom you can install magisk manager or, better for me, install in twrp magisk 11.4 zip file
I'm uploading now two new builds. RR sources on this project give same media encoder problems. Now I don't find errors
New builds with GApps
https://www.androidfilehost.com/?fid=818070582850511202
Without Gapps
https://www.androidfilehost.com/?fid=962187416754478323
Does this have any call blocking that uses a wildcard and does this have protected apps feature?
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
If You have installed magisk flash Google framework module and in this way you'll solve all problems. For no gapps ver i'll look inside
In 10 minutes from now 2 new builds:
changelogs
- new su daemon
- I hope to solve playstore hang
GAPPS
https://www.androidfilehost.com/?fid=674106145207484591
NO Gapps
https://www.androidfilehost.com/?fid=890278863836283078
raimondomartire, I appreciate your help! I wanted to let you know that for some reason my Bluetooth microphone doesn't work. When I am on a call it only goes through speakers, even if I toggle handset\bluetooth, and the volume doesn't do anything. I had to completely disconnect for it to go through handset. Any thoughts?
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
EDIT: It may of been an issue with the the beta Oreo firmware. I updated to the release Oreo firmware and all seems good so far. I had one hard crash during the setup process but that's it.
EDIT 2: The hard crash issue does appear to still be there, but happens far less frequently. It'll crash usually once a day and sometimes it'll crash and get stuck in download mode.
EDIT 3: The crashing issues seems to be the same as before. I've had it crash 7 or 8 times today.
ThatGuy94 said:
Does anybody know if the version with Gapps has the same problem with the GSI version where it'll cause the phone to crash and reboot?
Click to expand...
Click to collapse
Mine hasn't done that. I'm running v02.
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
That's a known issue. Easiest way is to either shutdown instead of reboot or connect to pc and use fastboot set_active a
BakaSenpai said:
Is anyone experiencing where if you restart your phone, it goes into the bootloader? O_O
Click to expand...
Click to collapse
Thankfully NO! Don't know what I usually mess up but this rom is doing fine. I do believe it has something to do with how you install. Try doing everything with fastboot, avoid using twrp. Also power off and reboot will both get you stuck in download mode. I will not do either if I am not by a PC to fix it. I also have my old one + one with me to put my sim in if needed.
BakaSenpai said:
Anyone having issues where apps are stuck on 'Download Pending' in Google Play?
---------- Post added 2nd May 2018 at 12:21 AM ---------- Previous post was 1st May 2018 at 11:36 PM ----------
From the looks of it - the NoGapps version doesn't have LTE working
Click to expand...
Click to collapse
If you have that issue, go to settings and force stop the Play Store. Once you reopen it, it should begin to download your apps like normal.
Hey guys I found a build of android 10 and it's stable for WHYRED only bug I found is night mod .
https://sourceforge.net/projects/sh...om-10.0-whyred-OFFICIAL-20190917.zip/download
I am note developer of this rom so don't ask stupid questions XD
Only kernel work on android 10 is pure CAF x11
Flash magisk 19.4 after flash ROM . Otherwise your phone going too boot loop.
Have good days with it ?
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Bruh.
Hardly roms are being out and you want a stable one
Wait for another 2 months for a good one to be out!
This Post was sent from a Script by @baalajimaestro
0veR said:
There is no stable build yet they all have lots of bugs. If you didnt find bugs it doesn't mean its that there is none and ROM is good. Also is not recommended to download random ROM from you don't know.
Click to expand...
Click to collapse
Tell me the bugs ? I didn't face any one . Just volte didn't work for me and ROM have good speed .
shea83 said:
I've tried it but for now it's too unstable... i've facing many random reboots.
Better wait to a more stable version..
But it's really a good rom, very fluid and smooth :good:
Click to expand...
Click to collapse
I didn't face any reboot . I have note 5 ai global
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
How did you enable volte in this rom ? My operator have volte but not working !
xell75 said:
On the newest, non-Beta version, VoLTE is working.So far no random reboots.
Click to expand...
Click to collapse
Link please?
harigavara said:
Link please?
Click to expand...
Click to collapse
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
No need gapps?
Installation instructions please?
ali.damiri said:
How did you enable volte in this rom ? My operator have volte but not working !
Click to expand...
Click to collapse
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
harigavara said:
No need gapps?
Installation instructions please?
Click to expand...
Click to collapse
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
xell75 said:
This one: https://sourceforge.net/projects/shekhawat2/files/exp/
It's called like that: KCUFRom-10.0-whyred-OFFICIAL-20190917.zip
Click to expand...
Click to collapse
Thank you. Bluetooth is working?
Did you see any bugs till?
xell75 said:
In the exp build of the Rom I use, VoLTE was enabled by default after my phone first boots up.
---------- Post added at 01:06 PM ---------- Previous post was at 01:00 PM ----------
Gapps included since it's basically like Pixel Experience. Just flash Rom and if you want root, use latest 19.4 Magisk (Must, since older versions of Magisk doesn't work on this Rom.) Latest Orangefox Recommended.
Click to expand...
Click to collapse
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
The only bug I have found for 2 days of usage is that night mode is not working
I had bootloop with that rom. I'm gonna try installing OP's rom and then updating
harigavara said:
Buddy, I am on Bootleggers rom, wiped everything except internal storage and flashed the rom file in the link you provided on ORANGE fox recovery. But ending up with bootloops. Tried twice and its the same.
EDIT:
Booted but now it is asking password
Click to expand...
Click to collapse
Is your storage encrypted?
The rom is very smooth. Using for about 12 hours and no problems. It's like a pixel with sd card slot.
xell75 said:
Is your storage encrypted?
Click to expand...
Click to collapse
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
harigavara said:
Yes.
I don't know why i couldn't use the rom.
Sometimes it boots to Google logo screen and then asks password if i give wrong password it asks to delete internal storage. And if i choose that, it will not boot to the format data screen.
So much random behaviours observed. It will boot to Google screen whenever it wants to.
I don't know why. I flashed fox 10 twrp itself.
Click to expand...
Click to collapse
You have to format data (not just wipe) to delete encryption, this will of course wipe your internal storage, so backup it id needed. Then it should boot.
As the title says, here's a list of some GSI's i have tested so far... but first for some story.
Bought the phone in summer, it's quite nice but has its own issues like no kernel source BUT since we can unlock the device and actually play around, oh boy it has been fun.
On the course of few hours and many downloads later I have a small list of GSI's that worked!
Every GSI I have mentioned REQUIRE device specific patch(es)!!!
For that you have to root.
----------------------WORKING GSI's-------------------------
BlissROM - It boots and functions quite fast
Cons: no included Gapps
Flashing any system editing patch results in "Phone is booting" homescreen.
https://sourceforge.net/projects/treblerom/files/BLESS/2020.09.21/
3.5 jack, VoLTE, Bluetooth, ComboFix patches are required, flash with Magisk manager
DO NOT USE FixLagSmooth
HavocOS 3.7 and 3.6 - Work and can be daily driven
3.6 requires FixLagSmooth patch
MUST root and apply all linked patches (don't use FixLagSmooth on 3.7, you can but no need)
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
AOSP Android 10 based - Also does work and requires patching
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
HydrogenOS Android 10 - Works
Has few bugs
No Google services
https://mirrors.lolinet.com/firmware/gsi/HydrogenOS/
----------------------COMMUNITY REPORTED GSI's-------------------------
Android 11 GSI - Reported to be functional by HumptyPotato47, thanks mate!
No Gapps as of now NikGapps exist for Android 11, search XDA for it!
Requires more testing...
https://github.com/phhusson/treble_experimentations/releases/tag/v300.f
----------------------MAYBE WORKING GSI's-------------------------
OxygenOS 10 GSI - Seems to work.. sorta
First boot after exiting fastboot causes the phone to reboot
Second boot will loop
https://mirrors.lolinet.com/firmware/gsi/OxygenOS/
----------------------NON FUNCTIONAL GSI's-------------------------
You tell me
...I did find a very nice list of GSI ROMs to try out more, here's the link:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
----------------------FLASHING GSI-------------------------
If you test one then don't hesitate with replying which one, about the experience, bugs and how you installed it.
My method of installing was this:
1. Make sure to have the new adb commandline that supports fastbootd mode
2. Drop the GSI .img file in /adb directory for ease
3. Make sure you're running MIUI with unlocked bootloader and USB debugging enabled
3.5 MAKE SURE you get a GSI ROM with Gapps as existing TWRP isn't fully functional
4. GSI you should have must be AB partition!!!
Once all set then follow the next commands
>adb reboot bootloader
>fastboot -w
>fastboot reboot fastboot
>fastboot erase system
>fastboot flash system "GSI-ROM-name-without-quotes".img
>fastboot reboot bootloader
>fastboot reboot
----------------------SETTING UP GSI-------------------------
Once all that is complete it should boot, if not then that specific GSI does not work.
Also a thing worth mentioning! Whenever I boot this phone to fastbootd Windows keeps forgetting what driver it was which requires
few extra clicks in device manager to set it up for fastbootd use. Including an image with simple to follow instructions if you have the same issue.
>fastboot boot twrp.img
Once in TWRP you should be able to access internal storage with your computer, drag Magisk.zip over and flash. Don't forget to wipe cache!
If it boots normally then root was successful, now apply the linked patch and reboot once again. Since we are playing with GSI:
Head to Settings
Find Phh Treble Settings
Misc features
Check Disable audio effect. -- DISABLE IT AFTER PATCHING!!!
IMPORTANT!!! I only tested Havoc and Bliss for a long period, IF one of my mentioned GSI's or others require more patches then I have linked headphone jack and Bluetooth audio patches too.
Combo fix should do the trick thought so your mileage may vary.
----------------------HELP US-------------------------
IF you find more working GSI's then tell us and I will make sure to add them to the main post so it won't get clogged under other comments!
Update on 05.10.2020 GMT+3
Bliss ROM GSI
As only a day or two have passed I already encountered few issues.
> You cannot remove screenshot sounds, even when fully muted
> Data drain is something interesting I've noticed, consumption compared to MIUI is higher.
> When using the gesture navigation it is a bit buggy when using quick side swipe for multitasking.
Positive notes!
> It is stupid fast
> Battery life is good
> GCam is amazing
> 99% of the customization options work perfectly
> Fast charging modes and such work perfectly
Neutral stuff...
> No FOD, thanks for closed source
> whenever you take a picture or a screenshot and have Blutetooth audio connected, it pauses and plays out loud via speaker. No music leaks out
this phone is born dead, no developer cares about it.
alsartawi said:
this phone is born dead, no developer cares about it.
Click to expand...
Click to collapse
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Kevin Soosaar said:
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Click to expand...
Click to collapse
i would pay to see a stable custom rom for this phone, i really loved it.
alsartawi said:
i would pay to see a stable custom rom for this phone, I really loved it.
Click to expand...
Click to collapse
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Kevin Soosaar said:
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Click to expand...
Click to collapse
does FOD works on Havoc OS?
edit: sorry i just read that it's not working.
alsartawi said:
does FOD works on Havoc OS?
Click to expand...
Click to collapse
FOD is not working as the driver sources are not public, reverse engineering is not possible too afaik. Everything else works.
Should i send this phone back to Amazon?
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
afigienas said:
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
Click to expand...
Click to collapse
Literally the main reason I made this post is to help others who are interested to use GSI ROM's on their devices. I do agree that MIUI has some decent features and I did use Xiaomu.eu before but it was so buggy. In the end I love customizing the device however I like it so MIUI is just not for me. Either way I might try to negotiate with Amazon to get a refund as touch and Bluetooth problems still persist. Fun fact, on Bliss the edge detection is pretty good and not as aggressive or straight out bad.
Simon_19 said:
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
Click to expand...
Click to collapse
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Is anyone try oos gsi ?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
can you give the link of the rom?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
Hi, there are gapps for Android 11, look for NikGapps here in XDA
Kevin Soosaar said:
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Click to expand...
Click to collapse
who said its cancelled?
Dr. DoubtReaper said:
who said its cancelled?
Click to expand...
Click to collapse
The mentioned Mi Note 10 Lite for India was supposed to be called Mi 10i or something like that. It quickly disappeared and is not happening.
Of course I might be wrong by this date but looking for now there is no 10i, only speculation videos and threads.
Mi Note 10 Lite for India would've been code named "tocoin", same hardware and everything else so just a rebadge in old Xiaomi fashion... :laugh:
anyone tried new version of blissROM? feedback?
GaryFisher88 said:
anyone tried new version of blissROM? feedback?
Click to expand...
Click to collapse
Not sure if the one I linked is up do date, give it a try yourself as my device went in for warranty repairs.
Hello, I am currently using Xiaomi.eu based on MIUI 12 and I would like to know how to flash HAVOC OS GSI. Should I flash back to Global Rom then flash the GSI as indicated? Answer is greatly appreciated.