Hi does any get huawei e8372h works with dasaita px5 4g ram?
I have the Dasaita PX6 4g ram and the Huawei e8372H-153 and it doesn't work. I get the carrier name on the display, I get the signal bar on top but no internet.
hello,
i have HUAWEI E3372h-153 and it does work good (i've been using it for more than a year now).
yet you need to work on it for a while. it doesn't work out of the box. moded firmware has to be flashed and has to be set it to 'Work Mode' or 'GateWay mode' -i don't remember which one.
i've tested it on PX5/6 and I have good transfer and stable connection.
seek for needle method E3372h.
Related
Hi all,
Recently i'm experiencing WI-Fi problem with my Huawei Ascend Mate 7 MT7-TL1C900B324 ( 32 GB, Gold), After turning on the wifi and connect to any Network it start to connect and disconnect all the time, Also sometimes the wifi turning on/off not appears to be active ( i mean it appear like disabled button ) this is about a month and half i was running the original version that comes with MT7-TL10 as default, again the same problem when i make an upgrade to B313 .
Yesterday just upgraded my MT7-TL10 to the latest B324 the problem still exist making me bored about this WI-FI problem.
Please need Help.
Thank you
Laouchi said:
Hi all,
Recently i'm experiencing WI-Fi problem with my Huawei Ascend Mate 7 MT7-TL1C900B324 ( 32 GB, Gold), After turning on the wifi and connect to any Network it start to connect and disconnect all the time, Also sometimes the wifi turning on/off not appears to be active ( i mean it appear like disabled button ) this is about a month and half i was running the original version that comes with MT7-TL10 as default, again the same problem when i make an upgrade to B313 .
Yesterday just upgraded my MT7-TL10 to the latest B324 the problem still exist making me bored about this WI-FI problem.
Please need Help.
Thank you
Click to expand...
Click to collapse
i have the same problem too, it appear it affected only to certain type of modem. in my case huawei brand (!!!). and TP-Link, Dlink.
if yours still under warranty, get it change. i am still awaiting for replacement ( almost 2 weeks already). you probably need to bring that modem for proof. in my case i just lucky it doesnt connect to the service center wifi ( although i bring my wifi as a proof)
mine also TL10 gold version
ahhl said:
i have the same problem too, it appear it affected only to certain type of modem. in my case huawei brand (!!!). and TP-Link, Dlink.
if yours still under warranty, get it change. i am still awaiting for replacement ( almost 2 weeks already). you probably need to bring that modem for proof. in my case i just lucky it doesnt connect to the service center wifi ( although i bring my wifi as a proof)
mine also TL10 gold version
Click to expand...
Click to collapse
Thanks dear,
how can i request change, i have bought it from Saudi arabia and right now i'm living in Morocco?
I was just wondering if this dongle:
https://www.carjoying.com/wireless-...-for-joying-android-car-stereo-radio-gps.html
will work on the Carjoying MTCD Unit.
I could also use PPPWidget 3 but I would really like signal bars in the notification areas.
Any experiences with this? Any other dongles work with the 5.1.1 Units? I would prefer not to use a hotspot dongle though.
Thanks!
Anyone tried this out?
I have eonon clone device and with Malysk rom my donge: HUAWEI E3131 works perfect.
Also interested, feedback?
looks like they have a new one:
https://www.youtube.com/watch?v=gbsMxcaHBOE
CadillacMike said:
looks like they have a new one:
https://www.youtube.com/watch?v=gbsMxcaHBOE
Click to expand...
Click to collapse
hotspot, not 3G/4G dongle.
I am looking for a 4G USB dongle wich works fine with my headunit running latest Malaysk rom with android 6
The hardware is a witson PX5 board.
Who can advise me what to buy?
I have tried the following (older) devices with no luck, hopefully someone has some info on devices which do work?
-Huawei e8278s-602 4G with WiFi
-Huawei e353
-3GO11
Sent from my Nexus 6P using Tapatalk
I tested:
LTE:
E3372
E8372 (with wifi)
without success - but it is strange because the Network Signal Icon appears and disappears...
I tested also 3G E3131 and this modem worked for me...
Now I use Wifi connection from E8372, which is powered from car installation, not from PX5Unit
I have a LTE HUAWEI E3272 modem and the internet works.
[email protected] said:
I have a LTE HUAWEI E3272 modem and the internet works.
Click to expand...
Click to collapse
I see an E3372 available cheap locally, anyone have any experience with them?
Sent from my Nexus 6P using Tapatalk
I have a E3372 but sadly no luck on the original Rom dated from december 27, 2017.
Will try in a few weeks the Malaysk Rom after my holiday.
Keep you posted.
Can anyone confirm that the E3272 definitly does work on the latest Malaysk Rom, as I have one of those also lying around would be nice if that one does work if the E3372 doesn't.
As my Wifi is dead for some reason (no valid MAC address anymore) it would save me a lot of time if I don't have to do it on a 3g signal.
I'm getting a new E3372 to replace a mifi (that works, it just does not connect by it self when it gets powered). Are people having these work on the PX5 with Malaysk?
I can confirm that Huawei E397u-53 works but only with PPP3 driving it.
https://www.amazon.com/gp/product/B01M0JY15V/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Some issues with PPP3, but that may just be issues with PPP3 itself.
If it looses cell service it will not reconnect, also sometimes PPP3 hangs and I have to force stop the app.
Most of the time it works fine, anyone know of solutions for the issues with PP3?
EDIT: Found some good info, going to try a powered USB hub and see if that improves things
http://www.draisberghof.de/android/pppwidget3.html
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
What I've read on the main Mayalysk thread all 4g dongles must have PPP to function, select 3g dongles work as integrated with the andriod system. Ordered a e1752, once it arrives I'll report back
https://www.aliexpress.com/item/huawei-3g-modem-lan-e1752-e1752c-3g-dongle-adapter-for-android-car-dvd-module-same-e1750/32834875238.html?spm=a2g0s.9042311.0.0.J0aAJx
The e1752 arrived after much anticipation and it does work plug and play without PPP, buuuut I only get edge in my area (Upstate NY) with this modem
Saw in another thread someone running a Alcatel One Touch Link W800 used as Ethernet, supposedly without PPP on Mayalysk Oreo Rom. Giving a shot, more when it arrives and can test.
https://www.amazon.com/gp/product/B00GKEEF88/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit:
Unit works as advertised, uses native LAN connection without the need for PPP.
Has a wifi AP too, but looking into how to disable that.
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
crator1349 said:
The e1752 arrived after much anticipation and it does work plug and play without PPP, buuuut I only get edge in my area (Upstate NY) with this modem
Saw in another thread someone running a Alcatel One Touch Link W800 used as Ethernet, supposedly without PPP on Mayalysk Oreo Rom. Giving a shot, more when it arrives and can test.
https://www.amazon.com/gp/product/B00GKEEF88/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit:
Unit works as advertised, uses native LAN connection without the need for PPP.
Has a wifi AP too, but looking into how to disable that.
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
Click to expand...
Click to collapse
did the alcatel work?
sev said:
did the alcatel work?
Click to expand...
Click to collapse
Yes, been using for a month or so now with good results.
Alcatel One Touch Link W800 uses native LAN connection without the need for PPP.
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
Only issue Ive run into is when it looses connection with the cell tower, it will attempt to reconnect, but if it is not able to reconnect after X amount of seconds the modem turns off.(not positive on the time frame maybe 100 seconds? )
Can anyone confirm LTE HUAWEI E3272 works on standard rom?
What is PPP... where I can found?
fur0n said:
What is PPP... where I can found?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget3&hl=en_US
Have any drivers been removed on Android 8 (PX5 MTCE XRC2 with Stock ROM or Malaysia 3.2)?
I've already tried a lot. But I can not connect at all via any kind of USB interface to the internet.
Tried out:
Nameless 4G - stick (could be ordered with the purchase of the HU): recognized in Windows and Linux as Ehternet adapter. In the HU no function. Only provision of a Wifi.
Nameless 3G - stick (from my old RK3188 with Android 5.1): Detected in Windows and Linux as Ehternet adapter. In the HU no function. Only provision of a Wifi.
Ugreen USB 2.0 10/100 Mbps Ethernet Cable Adapter: Detected in Windows and Linux as Ehternet adapter, just like my old RK3188 device. In the HU no function.
Huawei E8231s-2: Works in Windows and Linux. In the HU no function.
Huawei E170: In Windows and Linux recognized as a modem just like my old RK3188 device. In the HU unstable function only with PPP widget. Without PPP only triangle in the status bar.
Alcatel IK40V LinkKey: Detected in Windows and Linux as Ehternet adapter. In the HU no function.
USB/Bluetooth Tethering from Oneplus 6t and other Phones
I do not want to use Wifi, because the connection with simultaneous Bluetooth use is very bad. However, I get no modems or Ethernet adapter to run. The Alcatel W800 I get here nowhere.
Who has a definitely working 4G adapter that runs without PPP and best as an Ethernet adapter?
I was in Manchester today (Victoria Station if anyone is interested) and finally got to see "5G" on my OP8 (UK version) running Android 10. So, of course, the first thing to try is a speed test. I was getting around 340mb/sec downloads. Can't complain about that. So, while I was waiting for a train (I had 30 mins to spare), I thought I'd update the O/S to Android 11. it was 2.2Gb download and 5G just ate it all easily. Did the upgrade and checked the speed again. First time, it came out at about 300mb/sec. Second time, it was way down at about 50mb/sec.
Anyone know why the difference?
Cheers
Alan
I know here in the states, if we have -non-restricted- then its regular 4G speeds. Stand alone will be way faster. Best way to tell is use cell mapper.
I'm not sure how a cell mapper will help. I was sat in exactly the same place before and after the upgrade to android 11.
Alan
Do you use dual sims?
I see a difference when using 2 sims..
Remember that although you had 5g to the local cell tower that the bandwidth from there shared. Often variation is somebody else decided to download 2.2gb of updates as well
Thanks both. I only have one sim and yes, it could have been an issue post-cell. But I would hope that any infrastructure post cell can handle more than one phone at a time.
Alan
alan sh said:
I'm not sure how a cell mapper will help. I was sat in exactly the same place before and after the upgrade to android 11.
Alan
Click to expand...
Click to collapse
Cellmapper will tell you if your connection is the same between roms. Oneplus just shows the 5g icon all the time if the tower is capable but not if you're actually using it.
You could be just using 4G, 4G+NR NSA, or 5G SA. No way to know without a tool like cellmapper or signalcheck.
Hi,
After some geeky help !
We support some new devices which have Qualcomm SOC SDM660. 4GB RAM, 64GB ROM, 2.2 Ghz Octo Core Snapdragon.
I think the modem is used for wifi and lte.
We are having horrible issues with LTE and all other cellular services dropping. Have a ticket open with the manufacturer.
Any ideas on how to troubleshoot this. Have tried Android 9 v 10, changing all settings regarding LTE.
The 4G connection drops and an x appears. At this point you cant make phone calls, send SMS, or consume data.
Any ideas would be appreciated.
Also strangely when we get the issue it looks like upload is working but download isnt working