As it has come to my know, the WiFi edition suffering from the weak Wifi signal, so I am wondering if can I use my 3g/4g USB modem through Otg cable instead of the WiFi ?
DAGASH said:
As it has come to my know, the WiFi edition suffering from the weak Wifi signal, so I am wondering if can I use my 3g/4g USB modem through Otg cable instead of the WiFi ?
Click to expand...
Click to collapse
I will try this evening and let you know. I had this ideea this morning but didn't get to test it.
MrHollow said:
I will try this evening and let you know. I had this ideea this morning but didn't get to test it.
Click to expand...
Click to collapse
Please , let me know ..
I am going to buy this tablet ( WiFi version ) , and I heard so many people complaining of The weak wifi signal...
DAGASH said:
Please , let me know ..
I am going to buy this tablet ( WiFi version ) , and I heard so many people complaining of The weak wifi signal...
Click to expand...
Click to collapse
Personally i have the WiFi version and the signal is just fine... as long as you don't live in a block of metal you'll be just fine!
MrHollow said:
Personally i have the WiFi version and the signal is just fine... as long as you don't live in a block of metal you'll be just fine!
Click to expand...
Click to collapse
That is mine ... The insulation of our building is very good so signal of cell phone even suffer to reach some of the rooms, I am wondering if device will really do good job inside the building ...
I have tested it out and it does not work out of the box. You will have to root your tablet and use this guide: http://www.xda-developers.com/connect-any-3g-dongle-to-any-android-tablet/
Good luck
Does nVidia Shield K1 supports 4G USB modem through OTG?
I am looking for a 4G USB dongle wich works fine with my headunit running latest Malaysk rom with android 6
The hardware is a witson PX5 board.
Who can advise me what to buy?
I have tried the following (older) devices with no luck, hopefully someone has some info on devices which do work?
-Huawei e8278s-602 4G with WiFi
-Huawei e353
-3GO11
Sent from my Nexus 6P using Tapatalk
I tested:
LTE:
E3372
E8372 (with wifi)
without success - but it is strange because the Network Signal Icon appears and disappears...
I tested also 3G E3131 and this modem worked for me...
Now I use Wifi connection from E8372, which is powered from car installation, not from PX5Unit
I have a LTE HUAWEI E3272 modem and the internet works.
[email protected] said:
I have a LTE HUAWEI E3272 modem and the internet works.
Click to expand...
Click to collapse
I see an E3372 available cheap locally, anyone have any experience with them?
Sent from my Nexus 6P using Tapatalk
I have a E3372 but sadly no luck on the original Rom dated from december 27, 2017.
Will try in a few weeks the Malaysk Rom after my holiday.
Keep you posted.
Can anyone confirm that the E3272 definitly does work on the latest Malaysk Rom, as I have one of those also lying around would be nice if that one does work if the E3372 doesn't.
As my Wifi is dead for some reason (no valid MAC address anymore) it would save me a lot of time if I don't have to do it on a 3g signal.
I'm getting a new E3372 to replace a mifi (that works, it just does not connect by it self when it gets powered). Are people having these work on the PX5 with Malaysk?
I can confirm that Huawei E397u-53 works but only with PPP3 driving it.
https://www.amazon.com/gp/product/B01M0JY15V/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Some issues with PPP3, but that may just be issues with PPP3 itself.
If it looses cell service it will not reconnect, also sometimes PPP3 hangs and I have to force stop the app.
Most of the time it works fine, anyone know of solutions for the issues with PP3?
EDIT: Found some good info, going to try a powered USB hub and see if that improves things
http://www.draisberghof.de/android/pppwidget3.html
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
What I've read on the main Mayalysk thread all 4g dongles must have PPP to function, select 3g dongles work as integrated with the andriod system. Ordered a e1752, once it arrives I'll report back
https://www.aliexpress.com/item/huawei-3g-modem-lan-e1752-e1752c-3g-dongle-adapter-for-android-car-dvd-module-same-e1750/32834875238.html?spm=a2g0s.9042311.0.0.J0aAJx
The e1752 arrived after much anticipation and it does work plug and play without PPP, buuuut I only get edge in my area (Upstate NY) with this modem
Saw in another thread someone running a Alcatel One Touch Link W800 used as Ethernet, supposedly without PPP on Mayalysk Oreo Rom. Giving a shot, more when it arrives and can test.
https://www.amazon.com/gp/product/B00GKEEF88/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit:
Unit works as advertised, uses native LAN connection without the need for PPP.
Has a wifi AP too, but looking into how to disable that.
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
crator1349 said:
The e1752 arrived after much anticipation and it does work plug and play without PPP, buuuut I only get edge in my area (Upstate NY) with this modem
Saw in another thread someone running a Alcatel One Touch Link W800 used as Ethernet, supposedly without PPP on Mayalysk Oreo Rom. Giving a shot, more when it arrives and can test.
https://www.amazon.com/gp/product/B00GKEEF88/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Edit:
Unit works as advertised, uses native LAN connection without the need for PPP.
Has a wifi AP too, but looking into how to disable that.
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
Click to expand...
Click to collapse
did the alcatel work?
sev said:
did the alcatel work?
Click to expand...
Click to collapse
Yes, been using for a month or so now with good results.
Alcatel One Touch Link W800 uses native LAN connection without the need for PPP.
Running : PX5 2gb
MTCD HA V2.61_1
Mayalysk Rom v6.2
Only issue Ive run into is when it looses connection with the cell tower, it will attempt to reconnect, but if it is not able to reconnect after X amount of seconds the modem turns off.(not positive on the time frame maybe 100 seconds? )
Can anyone confirm LTE HUAWEI E3272 works on standard rom?
What is PPP... where I can found?
fur0n said:
What is PPP... where I can found?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget3&hl=en_US
Have any drivers been removed on Android 8 (PX5 MTCE XRC2 with Stock ROM or Malaysia 3.2)?
I've already tried a lot. But I can not connect at all via any kind of USB interface to the internet.
Tried out:
Nameless 4G - stick (could be ordered with the purchase of the HU): recognized in Windows and Linux as Ehternet adapter. In the HU no function. Only provision of a Wifi.
Nameless 3G - stick (from my old RK3188 with Android 5.1): Detected in Windows and Linux as Ehternet adapter. In the HU no function. Only provision of a Wifi.
Ugreen USB 2.0 10/100 Mbps Ethernet Cable Adapter: Detected in Windows and Linux as Ehternet adapter, just like my old RK3188 device. In the HU no function.
Huawei E8231s-2: Works in Windows and Linux. In the HU no function.
Huawei E170: In Windows and Linux recognized as a modem just like my old RK3188 device. In the HU unstable function only with PPP widget. Without PPP only triangle in the status bar.
Alcatel IK40V LinkKey: Detected in Windows and Linux as Ehternet adapter. In the HU no function.
USB/Bluetooth Tethering from Oneplus 6t and other Phones
I do not want to use Wifi, because the connection with simultaneous Bluetooth use is very bad. However, I get no modems or Ethernet adapter to run. The Alcatel W800 I get here nowhere.
Who has a definitely working 4G adapter that runs without PPP and best as an Ethernet adapter?
I recently bought a dual-band Linksys Archer A5 in Germany which only shows bands 36-64 in settings. Only my old Asus Padfone X (unlocked AT&T model) connects to the 5GHZ band. My Nex S (global), Huawei P10 and my son's P9 Plus don't even see it. But my Mi Mix 2 (chinese rom) sees it but won't connect and when I force it, it won't reconnect automatically. Even the WiFi Analyzer app doesn't see it on those phones. But my two Chinese TV boxes and my Lenovo tablet (US model) connect automatically.
Any ideas or a workaround? Any help is much appreciated.
Replies are always few and far between on this Nex forum. Anyone please?
Twotems said:
Replies are always few and far between on this Nex forum. Anyone please?
Click to expand...
Click to collapse
If you don't get an answer here, try a Linksys forum with your router model.
Saloei said:
If you don't get an answer here, try a Linksys forum with your router model.
Click to expand...
Click to collapse
Good idea but then it's unlikely they would know anything about Chinese phones.
Are there any head unit that support 5ghz wifi? Looking to upgrade mine since it only support 2.4ghz.
faiz5200 said:
Are there any head unit that support 5ghz wifi? Looking to upgrade mine since it only support 2.4ghz.
Click to expand...
Click to collapse
Nope, nil.
Hello guys!
Simple problem, OnePlus 9 Chinese (LE2110), my PC cant recognise 5ghz band hotspot from this device. Tried with 2 laptops as well, but nothing. Until now only an iPhone 11 could find my hotspot on 5ghz. The 2.4ghz works fine. Any ideea? Thanks!
Sheldd said:
Hello guys!
Simple problem, OnePlus 9 Chinese (LE2110), my PC cant recognise 5ghz band hotspot from this device. Tried with 2 laptops as well, but nothing. Until now only an iPhone 11 could find my hotspot on 5ghz. The 2.4ghz works fine. Any ideea? Thanks!
Click to expand...
Click to collapse
I know the chances are slim, but if the laptops are older, they may not have a 5ghz wifi card. How old are the laptops? Any chance you could try with a usb wifi dongle and see if it works on that.
mx597turbo said:
I know the chances are slim, but if the laptops are older, they may not have a 5ghz wifi card. How old are the laptops? Any chance you could try with a usb wifi dongle and see if it works on that.
Click to expand...
Click to collapse
My laptop have 5ghz, he can find the 5hz home router network. My pc have Dongle from TP LINK with 5GHZ suport too. The problems is the phone itsfel. I noticed the problem dissapeared on OOS12 OB1 and COS12 OB 1/2 xDD Looks like it s some software thing... xDD