Related
very hard brick. when the "resurrection guide" does not work anymore. what do you do?
the "resurrection guide" has always worked for me. :good:
but this time I can not flash the bootloader. it tells me error:
"USB_READ GOOT: 0, EXPECTED: 4, ERRNO: 121" that is repeated endlessly. see video http://www.youtube.com/watch?v=ke19sY0nQ2c. :crying:
display always off; no logo LG; no vibration. cable is ok (work on another phone p920). PC is ok. battery is ok.
there are alternatives to resurrect my p920?
pls use the lasted version of omap boot and try a other usb port
What happened to cause the brick?
drastic00 said:
What happened to cause the brick?
Click to expand...
Click to collapse
lgflashtool stopped.
for Mastertoby
last version OMAP? please link..
i have 1.25
galaxy76 said:
lgflashtool stopped.
for Mastertoby
last version OMAP? please link..
i have 1.25
Click to expand...
Click to collapse
Then it's probably an incomplete flash from incorrect driver install or possibly a corrupt .bin. Try this, take your time and read carefully and thoroughly.
http://forum.xda-developers.com/showthread.php?p=39269819
If you are on Windows 8, check the tips for that especially. The tutorial is for XBSA roms but the part for Flash Tool is the same.
If it won't work, then you might need to look at xbsall's resurrection guide.
Flashing the bootloaders in fastboot won't do the trick, as you have corrupted system, etc. from incomplete flash
drastic00 said:
Then it's probably an incomplete flash from incorrect driver install or possibly a corrupt .bin. Try this, take your time and read carefully and thoroughly.
http://forum.xda-developers.com/showthread.php?p=39269819
If you are on Windows 8, check the tips for that especially. The tutorial is for XBSA roms but the part for Flash Tool is the same.
If it won't work, then you might need to look at xbsall's resurrection guide.
Flashing the bootloaders in fastboot won't do the trick, as you have corrupted system, etc. from incomplete flash
Click to expand...
Click to collapse
surely I have a corrupt boot. fastboot not work. this time resurrection guide not work for me.
now I read the link
okay. the guide is done well and is suitable for beginners. I'm not a beginner. now I know a lot of things.
I have resurrected many times my p920.
Now I can not anymore.
I boot corrupt. I'm looking for an alternative solution, but have not been able to find it.
I know you can do it via USB (no JTAG). look octoplus http://octoplusbox.com/eng/news/details/301
the problem is: how to do without the box otoplus?
sorry for me english. i'm italian
Same problem here mate... My phone is just booting for a second with LG Logo and stops. I'm waiting for an answer too. ^_^
Nightfallen said:
Same problem here mate... My phone is just booting for a second with LG Logo and stops. I'm waiting for an answer too. ^_^
Click to expand...
Click to collapse
non è lo stesso problema. il mio non si avvia. schermo è nero
It doesn't matter if you are a beginner. The driver install steps are the same. Once that is done correctly you can use fastboot or flash tool or whatever you want. I am simply suggesting what has worked for me. One way to get out of bootloop is to reflash. Another is to flash the correct bootloader.
Either way, if omap is blinking then the drivers are not installed correctly.
You may also need the LG drivers. That is why I say to start at the beginning.
you can sive it ifyou can enter download mod use lg support tool
and flashe it with mergency mod that method sive my p920 in this last weck end
galaxy76 said:
...
but this time I can not flash the bootloader. it tells me error:
"USB_READ GOOT: 0, EXPECTED: 4, ERRNO: 121" that is repeated endlessly. see video http://www.youtube.com/watch?v=ke19sY0nQ2c. :crying:
display always off; no logo LG; no vibration. cable is ok (work on another phone p920). PC is ok. battery is ok.
there are alternatives to resurrect my p920?
Click to expand...
Click to collapse
galaxy76 said:
okay. the guide is done well and is suitable for beginners. I'm not a beginner. now I know a lot of things.
I have resurrected many times my p920.
Now I can not anymore.
I boot corrupt. I'm looking for an alternative solution, but have not been able to find it.
I know you can do it via USB (no JTAG). look octoplus http://octoplusbox.com/eng/news/details/301
the problem is: how to do without the box otoplus?
sorry for me english. i'm italian
Click to expand...
Click to collapse
My pc motherboard fried few days ago and[for things to be even worse] my android system was getting very unstable so I wanted to replace it and I did it in the same time as my mobo got fried..
Noooo....
So when I erased system in my twrp, the twrp became unresponsive and laggy, I couldnt do anything with it.
So now I said:"No prob I'll just reflash twrp and bootloaders with OS_Hackings tool..."
It wouldn't be the problem on my old WIN7 PC but now I didn't have it anymore so I had to use my old XP rig.Now we come to the problem, I get the exact same usb error(mine was 31 not 121 but the problems are related to drivers probably).So I installed OMAP4430 like always and when I start OS_Hackings tool it doesn't recognize the phone after "waiting 5sec"..I must say that I've done this many many many times before(on WIN7) but i couldn't get it to work on WIN XP no mater what I did.
In the end I updated to official v30A via offline kdz updater and flashed twrp and ics bootloaders with Xbsalls "rebooter".
Making rebooter work was pure luck because of that not-getting-into-fastboot problem but after 20tries it worked somehow..
Drivers are my bet and I really hate XP.XD
And yes, I used the same cable and battery on win7 and xp...
Edit:I forgot to say that when it says "waiting for 5sec" and I insert the battery, instead of phone getting into fastboot(grey logo and fastboot v.05 on displey) it just illuminates the four soft keys on the phone and gives me an error "USB_READ GOOT: 0, EXPECTED: 4, ERRNO: 31" on the PC.
If anyone knows what is the cause(and/or the solution) for this please tell us, I'll be very grateful.
Sent from my LG-P920 using xda app-developers app
If you wiped system in twrp and did not install a system or a rom with a system at that time, the phone can't boot because there is no system. You'd need to flash a .bin or .kdz.
Not sure if that's what you meant.
Just try after clearing or Resetting COM port. :good:
It may work sometimes...
Try this, i have also experience that on my phone, I thought that it's dead but good thing I unbrick it.
try to re-install all drivers and hardware in device manager. i.e. uninstall - reboot - reinstall
make sure your usb cable is good, the usb port of phone is good, the usb port of computer is good.
if you can't go to download mode, try the WKPARTS omap4boot and the tutorial made by xbsall. (credits to them)
It's not a very hard brick, its 1.25 fastboot that do this sometimes.
I have had this too, just use the earlier 1.16 or 1.11 bootloaders, it should work.
drastic00 said:
It doesn't matter if you are a beginner. The driver install steps are the same. Once that is done correctly you can use fastboot or flash tool or whatever you want. I am simply suggesting what has worked for me. One way to get out of bootloop is to reflash. Another is to flash the correct bootloader.
Either way, if omap is blinking then the drivers are not installed correctly.
You may also need the LG drivers. That is why I say to start at the beginning.
Click to expand...
Click to collapse
I thank you for your help.
I have 2 LGP920. one (A) works perfectly. the other (B) will not work.
the drivers are installed properly.
the problem is that during the fastboot (P920 (B) I can not go beyond the 2ndstage. WHILE I CAN WITH THE OTHER P920 (A)
http://s10.postimg.org/d573ozy09/driver_is_ok.jpg (P920 WORKING (A)
http://s10.postimg.org/uenknlnu1/errno_121.jpg (P920 NOT WORK (B)
http://s17.postimg.org/htk5vy21b/driver_omap.jpg (P920 NOT WORK (B)
toty250 said:
you can sive it ifyou can enter download mod use lg support tool
and flashe it with mergency mod that method sive my p920 in this last weck end
Click to expand...
Click to collapse
Thank you. already tried. does not work
Unique Boy said:
Just try after clearing or Resetting COM port. :good:
It may work sometimes...
Click to expand...
Click to collapse
the problem is that the P920 (B) I can not get in no way a COM port
Similya said:
Try this, i have also experience that on my phone, I thought that it's dead but good thing I unbrick it.
try to re-install all drivers and hardware in device manager. i.e. uninstall - reboot - reinstall
make sure your usb cable is good, the usb port of phone is good, the usb port of computer is good.
if you can't go to download mode, try the WKPARTS omap4boot and the tutorial made by xbsall. (credits to them)
Click to expand...
Click to collapse
I've done this 50 times. I formatted the PC (XP and seven)
What is WKPARTS?
Hi guys.
I was trying to upgrade a clone of an A110 and put rayne rom in it, so i wiped the system partition and tried to install the rom. Apparently the rom was corrupt and CWM didnt install it. So I rebooted the phone and it froze in the logo screen. it wont start since then, always freezing in the logo screen. I tried putting back a stock rom with sp tool, but the soft dont recognize the phone and keep on searching.
what should I do?
Install proper drivers for ur phone...then try ur luck with sp flash toolS. B/w haven't u backed up the things before trying?
[email protected] said:
Install proper drivers for ur phone...then try ur luck with sp flash toolS. B/w haven't u backed up the things before trying?
Click to expand...
Click to collapse
nope, didnt backed it up :/
I tried several rom, always lands in an irresolvable bootloop, or a direct boot to recovery. sp flash didnt work, it dont recognize the phone ( right drivers are installed), kinda blocked right now
Friwli said:
nope, didnt backed it up :/
I tried several rom, always lands in an irresolvable bootloop, or a direct boot to recovery. sp flash didnt work, it dont recognize the phone ( right drivers are installed), kinda blocked right now
Click to expand...
Click to collapse
Sorry....don't know what to do next.
Though m sure that sc people must be having some solution.
Best of luck
[email protected] said:
Sorry....don't know what to do next.
Though m sure that sc people must be having some solution.
Best of luck
Click to expand...
Click to collapse
I figured it out, a driver's issue. Found the right one, sp tools worked, working like a charm again :good:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Maybe you can try to follow this step :http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
If didnt work,maybe there is a problem in your hardware,try to service your phone to service center.
It didn't work.. Is there a way how to solve hardware problem?
Or trt another ways in this website
http://androidflagship.com/3217-fix-damaged-bricked-android-device
My note 10.1 N8000 have the same problem,i try to fix it,but its hard,so i send my phone to service person,they fix the hardware..
How much did you pay?
Growicek said:
Hi, please I need your help. I tried to flash stock ROM but I hard bricked my phone. When I connect phone with computer I'm holding volume up button. In device manager it shows "MediaTek USB Port (COM4)" but after three seconds it disconnect. This is why I can't flash ROM. It's everytime disconnect after three seconds.. Please help me.
Click to expand...
Click to collapse
What tool are you using to flash the stock firmware .and it will be helpful if you say how exactly you bricked it
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Growicek said:
I'm using SP Flash Tool for flashing.. I tried to flash stock ROM into my Lenovo A536, when it was done I unplugged phone from computer and tried to power on but there was a problem.. Phone was hard bricked
Click to expand...
Click to collapse
So your saying the flashtool bricked your phone ?
Where did you get the firmware for your phone cuz flash tool can only brick your device if you used firmware not for your phone. Also does your phone shows any sign of life ie vibrate turn on for a sec, bootloop etc...
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Growicek said:
I don't remember where did I find it.. There is only one sign of phone life. When I connect it with computer, phone connect but only for a while, after a three seconds disconnect.
Click to expand...
Click to collapse
I know two guys who had this problems.
1) guy took it to service ,they fixed it.
2) installed phone drivers again and tried again and it worked.
If you're confident you have the right firmware load scatter click download and connect your powered off phone without pressing any buttons ,and see if it works.
Anyway I'm narrowing down the cause of the problem to either an incorrect firmware or a sp flash tool version (some version are ****)
Didn't work
Growicek said:
Didn't work
Click to expand...
Click to collapse
Pull out the battery then leave it for 10 min reinsert and see if it boots (give it some time ) .if it doesn't
Or connect your phone to PC(without battery) ,load scatter click download on sp flash tool ,then put in the battery .
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Growicek said:
First method - didn't work
Second method - device automatically disconnect after three seconds, so SP flash tool says error
Click to expand...
Click to collapse
What error code?
I bricked my device same as you so I could help you further but my device connected in meta mode and flashed its firmware fine ,so try another USB cord
Ps I've pretty much mentioned all I know about unbricking in this thread so I can't be of further help.https://www.google.co.in/url?sa=t&s...ggeMAA&usg=AFQjCNGkwgZbNQCJFWtm90DM-Mksnzk0dA look this up specifically #9
It didn't work.. Error is: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Growicek said:
Wow! I did something and then uninstalled driver. When I connected phone, driver automatically installed and now it's not disconnecting, but still can't flash it
Click to expand...
Click to collapse
That's great ,what's the problem now ? Still brom error or download stuck st 0% or any other?
Still same brom error
Growicek said:
Still same brom error
Click to expand...
Click to collapse
Brom error is mostly related to see improper firmware which also explains why you're phone got bricked in the first place .
Try downloading another stock firmware
Man? I love you!!! I tried about four ROMs and the fourth is working!! .. There was a one more problem with flashing again with drivers, idk why but they dissapear, so I installed them again and then tried flash ROM.. Thank you very much! You saved my money!
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol
I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com