Disclaimer: Any shared files in this thread were not created by me. I do not own any of these files and i will not help you if a profiles loudness made you deaf, burned down your earphones, killed your loudspeakers or started a nuclear war.
This Thread was created for only one reason:
To share profiles and irs files for Arise Sound Systems http://forum.xda-developers.com/showthread.php?t=3379709
and for Viper4Android in general.
GENERAL RULES for sharing profiles:
- 1. Name your Profile
- 2. Write the Version of Arise you are using with the shared profiles.
(example: Arise Genesis RC 3)
- 3. Taken tweak.prop file
(example: sonophilos)
- 4. HTC Dolby Atmos Preset
(example: Harman Kardon)
- 5. Audio Effects.conf
(example: XPlay3s)
Happy Sharing[emoji16]
Here is my Zombie Series that I believe i've shared on all of guitardedhero's threads? I use on both my OnePlus X and my S3. These are mainly tweaked for speaker use as I do not use headphones. I've used these through the whole uprising of A.R.I.S.E. as well as guitardedhero's Viper packages. The one I mostly use is ZombieSin. Some also like Zombiefied.
https://drive.google.com/file/d/0By5C3rBWmML3c2NMOV9zRTFUdkU/view?usp=drivesdk
Sent from Outside the 9 using my Zombiefied Exodus OnyX
I would like to introduce my profile called Soundaholic.
It was inspired by the profiles of guitardedhero and sonophilos.
Device: Moto Maxx XT1225
Headset: JBL J-22
Bluetooth: Samsung HT-F5525WK
Software: ARISE Sound Systems
Tweak.prop: Sonophilos
Profile name: Soundaholic
Excellent balance between bass and clarity.
Tested with Hip Hop, Folk, Rock and Pop.
IMPORTANT: Lock effect mode to headset first.
BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
HS = Headset (Wired and Wireless).
SP = Speaker (Smartphone Speakers).
If you want to change volume level just adjust the Output Gain in Master Gate.
Thanks to @guitardedhero and @sonophilos for the inspiration!
Running on yureka
Headphones are stock yureka headphones.
Oct os ROM
Exodus version 0.8.5 tweak prop by sonophiles
Little bit towards soft bass.
IRS file included in zip.http://cloud.tapatalk.com/s/57460c76d1609/lenovo.zip
Sent from my AO5510 using Tapatalk
RSDamasceno said:
I would like to introduce my profile called Soundaholic, It was inspired by the profiles of guitardedhero and sonophilos (Thanks men).
Excellent balance between bass and clarity.
Moto Maxx with JBL J-22 and Samsung HT-F5525WK
Tested with Hip Hop, Folk, Rock and Pop.
Notes:
1 - Extract to Vipers folder.
2 - I suggest sonophilos tweak.prop.
3 - BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
4 - HS = Headset (Wired and Wireless).
5 - SP = Speaker (Smartphone Speakers).
6 - Lock effect mode to headset first.
7 - If you want to change volume level just adjust the Output Gain in Master Gate.
8 - Thanks to guitardedhero and sonophilos for the inspiration!
Click to expand...
Click to collapse
I have been using this since posted in the Arise thread, and I love this profile, I am actually using it with sonophilos modified tweak.prop and xplay3 preset and it sounds amazing!
1. Oneplus 3
2. V-Moda Crossfade lp²
3. Deep Bass+Clarity
4. Latest
V1: (The zip includes the profile folder and the irs file)
This profile is specifically tuned for my headphones for Deep and strong bass while maintaining the clarity in music. Recommended for house, electronic music, trance, trap, dubstep.
Disable the EQ if there is too much treble for you or your headphones although this will take away most of the clarity.
Im courious to know if this works well for other headphones too. Good luck!
Edit: Disable convoler and enable Spectrum Extension at 0.5 if you listen to rock/metal.
V2:
Best experience with Oneplus 3 official stock/beta roms. Go to settings/audio and enable audio switch, set earphone type to general and dont use any of the preset equalizers.
It will work on all devices though but I dont guarantee the optimal sound quality.
Wow
Unbelievable and thank you?
Teeth shatteringly good.
BOOM !! Mother of God that gave me an erection. It made my rooted HTC Desire 510 sound better then my stock M9.
I updated my profiles and would like to share with you...
Tested with ARISE Sound Systems Exodus 0.9.4 & tweak.prop by Sonophilos.
RSDamasceno said:
I updated my profiles and would like to share with you...
Tested with ARISE Sound Systems Exodus 0.9.4 & tweak.prop by Sonophilos.
Click to expand...
Click to collapse
I am noob. Sorry i just want to ask if i Can flash it on twrp?
Sent from my Nexus 6P using XDA-Developers mobile app
raniel24 said:
I am noob. Sorry i just want to ask if i Can flash it on twrp?
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
no, extract, then go in profiles folder and select the profile folders inside and move to Viper4Android, and paste inside profiles folder. Then open the extracted kernels folder and move all those to Viper4Android kernels folder.
Sent from Outside the 9 using my Zombiefied Exodus OnyX
raniel24 said:
I am noob. Sorry i just want to ask if i Can flash it on twrp?
Click to expand...
Click to collapse
No. Just extract the Profile zip and merge the /ViPER4Android folder into the directory where /ViPER4Android/Profile/Stock exists.
Like described here: http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Sent from my Motorola Moto MAXX using XDA Labs
Oneplus One
JBL 22
Arise Exodus 0.85 with Sonophilos tweak.prop. for Exodus 0.8.5
Elite Sound 1.0 J.E.N.O.V.A. Profile
Irs is inside the zip
(zip is not flashable!)
https://drive.google.com/file/d/0Byu7-T-ICFbMai16aEwxeHdmNkU/view?usp=drivesdk
This is Spaaartaaaaa!!!
I've updated my Soundaholic profile...
I updated my profile called Soundaholic.
It was inspired by the profiles of guitardedhero and sonophilos.
Device: Moto Maxx XT1225
Headset: JBL J-22
Bluetooth: Samsung HT-F5525WK
Software:
ARISE Sound Systems Exodus 0.8.9 (preferred)
Or
ARISE Sound Systems Exodus 0.9.6
Sounds better with respective version of sonophilos or guitardedhero build.prop
Profile name: Soundaholic
Excellent balance between bass and clarity.
Tested with Hip Hop, Folk, Rock, Metal & Pop.
IMPORTANT: Lock effect mode to headset first.
BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
HS = Headset (Wired and Wireless).
SP = Speaker (Smartphone Speakers).
If you want to change volume level just adjust the Output Gain in Master Gate.
Thanks to guitardedhero and sonophilos for the inspiration!
See notes above.
Sent from my Motorola Moto MAXX using XDA Labs
RSDamasceno said:
I've updated my Soundaholic profile...
I updated my profile called Soundaholic.
It was inspired by the profiles of guitardedhero and sonophilos.
Device: Moto Maxx XT1225
Headset: JBL J-22
Bluetooth: Samsung HT-F5525WK
Software:
ARISE Sound Systems Exodus 0.8.9 (preferred)
Or
ARISE Sound Systems Exodus 0.9.6
Sounds better with respective version of sonophilos or guitardedhero build.prop
Profile name: Soundaholic
Excellent balance between bass and clarity.
Tested with Hip Hop, Folk, Rock, Metal & Pop.
IMPORTANT: Lock effect mode to headset first.
BT = Bluetooth (Speakers, Sound Systems and Home Theaters).
HS = Headset (Wired and Wireless).
SP = Speaker (Smartphone Speakers).
If you want to change volume level just adjust the Output Gain in Master Gate.
Thanks to guitardedhero and sonophilos for the inspiration!
Click to expand...
Click to collapse
Hello
I locked effect mode to headset and when i load the profil headset will be changed but not the speaker.
I also tried disable lock from headset but speaker would not change.
What can i do?
Sent from my Nexus 6P using XDA-Developers mobile app
xerxes1511 said:
Hello
I locked effect mode to headset and when i load the profil headset will be changed but not the speaker.
I also tried disable lock from headset but speaker would net change.
What can i do?
Click to expand...
Click to collapse
Try to select the profile twice. Some users have reported that the profile is not loaded the first time. That includes me. It is a known bug V4A.
Sent from my Motorola Moto MAXX using XDA Labs
RSDamasceno said:
Try to select the profile twice. Some users have reported that the profile is not loaded the first time. That includes me. It is a known bug V4A.
Sent from my Motorola Moto MAXX using XDA Labs
Click to expand...
Click to collapse
I tried it but only headset will be changed
This is really funny ?
Sent from my Nexus 6P using XDA-Developers mobile app
xerxes1511 said:
I tried it but only headset will be changed
This is really funny ?
Click to expand...
Click to collapse
The options available in V4A some are marked or changed like that?
Sent from my Motorola Moto MAXX using XDA Labs
RSDamasceno said:
The options available in V4A some are marked or changed like that?
Sent from my Motorola Moto MAXX using XDA Labs
Click to expand...
Click to collapse
Here are the pictures with locked Headset?
I have the same settings
Sent from my Nexus 6P using XDA-Developers mobile app
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Arise. Simple to use, great sound quality and a lot of customization.
There are many Arise editions but I find the attached one simplest to use.
Steps:
1. Flash the attached file (ARISE Sound Systems Deuteronomy 2.2.3 Mac 'n Cheese Edition FINAL) through TWRP
**For Android Oreo flash the included (ViPER4Android_2.5.0.4_Wonder_Wicked_Witch_12-Jan-2018.zip) file through TWRP instead.**
2. Reboot to OS
3. Install Busybox (https://play.google.com/store/apps/details?id=ru.meefik.busybox) from Play Store
4. Open the Busybox app and install busybox
5. Enter the Viper4Arise app
Done!
Next, you need to set up the sound mod.
*I only use Viper4Arise for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Arise's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi 4X are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.rar into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
wow your profile settings and irs file make the sound on my headset amazing ??? thx ?
How much sound difference between viper and a dedicated dac say dragonfly black?
Del 10char
Short description:
The combined port of the audio engine of Samsung Galaxy S8 and Galaxy S9
The global influence on the sound device, whether it be the sound from the browser, polyphony, microphone recording and audio player
Increases the detail, clarity, volume and selection of instruments in the track being played.
Treated vocals become more lively, deep and saturated low frequencies.
With a long listening to music does not occur discomfort in the ears.
Loss quality audio fixes.
The ability to control proprietary SoundAlive audio effects such as:
- Clarity
- Bass Treble
- Vocal Instrumental
- Concert Hall
- Tube Amp Pro
- Sorround
- 9 band EQ with presets configured
- UHQ Upscaler
- Rehampler UHQ
- Dolby Atmos
Features:
- HiRes effects are ported and used, (list above), ie when listening to music 32/384 or 24/192 and so on, the processing will take place at the same bit rate and frequency
- Dolby Atmos has full support for androids 9.0 and below
Smart installer:
- Support installation via Magisk and determining whether it is embedded in the system
- Support installation directly in the system without disconnecting the device through the terminal emulator, if recovery is not available
- Automatic creation of backup, all replaceable and editable files
- Automatic selection of installation on 32 and 64 bit systems
- Fully deleted, the installer is also an uninstaller, to delete, you must reinstall the archive in the recovery or magic, then the removal process will go
Settings soundalive:
You don’t need the presence of root for the engine, but it is needed to manage its settings.
Settings are stored in /system/etc/soundalive/SoundAlive_Settings.xml
If this file does not appear, flash SoundAlive again.
To apply the settings you will need to restart or restart the interface, which is much faster
Enter the following commands in the terminal:
su
am restart
Effects designed for individual outputs speaker, bluetooth, headphones.
BT__ - Bluetooth Headset
SPK__ - phone speaker
EAR__ - headphones
1 enabled, 0 disabled
Example:
<int name = "BT__SA_GLOBAL_EFFECT_SURROUND" value = "0" /> Effect disabled
<int name = "BT__SA_GLOBAL_EFFECT_SURROUND" value = "1" /> Effect enabled
INSTRUMENTAL_VOCAL
Instrumental Vocal Regulator
Values from -8 to 8, where 0 is disabled, to -8 more instrumental part is allocated, up to 8 vocals are allocated
BASS_TRABLE
Low and high frequency control
Values from -8 to 8, where 0 is disabled, -8 bass is allocated, up to 8 high frequencies
EQ
Presets for 9 band EQ:
0 - Normal
1 - Pop
2 - Classic
3 - Jazz
4 - Rock
5 - Customizable (manual equalizer adjustment is available on this preset only)
SA_SQUARE_INDEX
Clarity
Makes the sound more lively and clear.
Values 36, 38, 40, 42
SA_GLOBAL_EFFECT_DOLBY
SA_GLOBAL_EFFECT_DOLBY_OLD
Dolby atmos
A playback system that provides incredibly surround sound and surround sound effect.
To activate the effect, you need to enable, for example, preset music.
DOLBY value = "3"
DOLBY_OLD value = "3"
To disable everywhere put 0
0 - disabled
1 - auto
2 - movies
3 - music
4 - voice
SA_GLOBAL_EFFECT_SURROUND
Sorround
Create a rich surround sound effect.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_TUBE_AMP
Tube amp pro
Emulate the tone of a tube amp.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_CONCERT_HALL
Concert hall
Sound effect in the concert hall.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_UHQ
SA_GLOBAL_EFFECT_UHQ_OLD
UHQ Upscaler
Improve sound quality when playing music and videos for the best listening experience.
To enable, put 1 on both versions
UHQ value = "1"
UHQ_OLD value = "1"
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_PBM_UHQ_OLD
UHQ Re-sampler
For BT:
0 - off
1 - 96 KHz
For EAR:
0 - disabled
1 - 192 KHz
2 - 384 KHz
SA_LIST_INDEX
3D processing, 5 presets, each has its own sound
0 - disabled
1-5 included
SA_EQ_INDEX_0, frequency 63
SA_EQ_INDEX_1, frequency 125
SA_EQ_INDEX_2, frequency 250
SA_EQ_INDEX_3, frequency 500
SA_EQ_INDEX_4, frequency 1k
SA_EQ_INDEX_5, frequency 2k
SA_EQ_INDEX_6, frequency 4k
SA_EQ_INDEX_7, frequency 8k
SA_EQ_INDEX_8, frequency 16k
9 band equalizer
Values from -10 to 10, where 0 is disabled, down to -10 lowers the amplitude of frequencies, increases to 10 to 10
Important for samsung phones:
Incompatible with official firmware and ports based on them
The list of supported firmware is possible and not all of them will work:
Lineage os
RR
Aosp
And all based on los and do not write about other ports (custom)!
Click to expand...
Click to collapse
Version 4.4:
- Updated installer for the new Magisk
- Updated audio engine
- Updated Sound Alive
- Alsa configuration port, qcom and exynos only
- Connected soundalive via alsa, only for qcom and exynos
- Setting up the audio engine based on the latest Galaxy S9 firmware using a disassembler
- Redesigned general sound panorama
- Added interface in the terminal emulator, for managing effects, in the test
Called by the command: sae
- Added automatic cleaning of the dalvik-cache and reboot
Changed the installation procedure for version 4.4:
1. After installing the engine, the dalvik cache will be automatically cleaned, then the phone should reboot, it will be necessary to wait ...
2. Set SA_Settings
3. Reboot
And enjoy the music
Uninstall:
Run the installer in recovery and the removal process will go
Android required: 5.0+
Recommended Android version: 7.0-9.0
Interface: No
System: 32/64/x86
Stable version: 4.4
Samsung Audio Engine V4.4: Download
SA Settings R8: Download
XDA:DevDB Information
[PORT][AUDIO] Samsung Audio Engine, App for all devices (see above for details)
Contributors
Roman_city
Version Information
Status: Stable
Current Stable Version: 4.3.1
Stable Release Date: 2020-01-09
Created 2019-02-25
Last Updated 2020-02-02
Reserved
Changelog:
Version: 4.2 | 10.05.2019
- Added Magisk support
- Added Speex from S9 improves speech processing
- Fixed bug with hanging outgoing and incoming calls
- Fixed bootloop on mtk android 8.1
- Fixed errors in the engine
- Fixed bugs in UHQ resampler
- Cut conflict files
- Adjustment in sound
Version: 4.1 | 25.02.2019
- Fixed bugs
- Added and corrected system file permissions
- Rewritten installation process
- High resolution effects for androids 5-6 included
- Fixed partition mounting
- Fixed installation process via terminal
- Added option resampler UHQ Upscaler
Version: 4.0 | 03.02.2019
- Updated SoundAlive52 to version 54 from Galaxy S9 9.0
- Added support for high resolution effects.
- Included high-resolution effects, ported from Galaxy S9 9.0 for Android 7.0-9.0, for Android 5.0-6.0 the standard resolution is used
- Fixed Dolby, UHQ effects
- Added choice of quality UHQ Upscaler
Resampler UHQ support:
Bluetooth:
Normal 44.1 kHz
UHQ 96 kHz
Headphones:
Normal 48 kHz
UHQ 192 kHz
SUHQ 384 kHz
- Security update for the engine
- Combined Galaxy s8 engine with Galaxy s9
- Added support for audio pro, low latency if system supports
- Updated pro audio driver
- Removed installation of Google media effects on systems without gapps - this has a good effect on sound
- Improved compatibility with android 5.0-6.0, 9.0
- Updated soundalive settings
- Fixed installer errors
Version: 3.0 | 12.01.2019
- Bugs fixed
- Improved compatibility with android 9.0
- Migrated sound
Version: 2.2 | 31.12.2018
- Updated DolbyAtmos from the latest Galaxy S9 update android 9.0 Pie
- Effects fixes
- Minor installer changes
- Balanced sound
Version: 2.1 | 24.12.2018
- Fixed bootloop on android 9.0 Pie
Version: 2.0 | 23.12.2018
- Fully updated engine from the latest version of the firmware Galaxy S8
- Ported SoundAlive from Galaxy S9
- Ported DolbyAtmos from Galaxy S9
- Added the ability to manage SoundAlive settings and effects such as:
Dolby Atmos
Concert Hall
Tube Amp Pro
Sorround
UHQ Upscaler
3D
EQ
- Fixed compatibility issues with some devices.
- The function that from long listening to music does not cause discomfort in the ears
Version: 1.0 | 28.11.2018
- Ported audio engine from Samsung Galaxy S8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Interesting, got to try it.
Thanks Dev.
Nice! Thanks for that, now about the Mod
The App force close, is that normal? Are we supposed to edit the settings in the System Files?
Edit: Yes
Is there any apps SoundAlive? Cause I don't see it, but SoundAlive.xml is there.
For sure, my existing Dolby atmos crash.
teatea said:
Is there any apps SoundAlive? Cause I don't see it, but SoundAlive.xml is there.
For sure, my existing Dolby atmos crash.
Click to expand...
Click to collapse
Yes there is, it just does not show up on the Drawer, but you can see it on your Apps List
Guilhermex12 said:
Yes there is, it just does not show up on the Drawer, but you can see it on your Apps List
Click to expand...
Click to collapse
Well, somehow I can't open it. I try to use Sony Music - Setting - Sound Effect, doesn't show.
And most importantly, my Dolby atmos crash.
teatea said:
Well, somehow I can't open it. I try to use Sony Music - Setting - Sound Effect, doesn't show.
And most importantly, my Dolby atmos crash.
Click to expand...
Click to collapse
You actually can't use the app, at least for now, you must edit the settings via the Soundalive.xml file.
And what Dolby Atmos are you talking about? Are you on Oreo?
Guilhermex12 said:
You actually can't use the app, at least for now, you must edit the settings via the Soundalive.xml file.
And what Dolby Atmos are you talking about? Are you on Oreo?
Click to expand...
Click to collapse
I'm on Nougat. On my oreo and pie devices, atmos doesn't work. I keep my Nougat devices only for atmos.
No chance to install on official samsung j7 nougat rom ?
teatea said:
I'm on Nougat. On my oreo and pie devices, atmos doesn't work. I keep my Nougat devices only for atmos.
Click to expand...
Click to collapse
Ah, got it
The sound really got better.
But bootlup on the latest version. Previous worked.
Sharp aquos p1 device
OS: Android 6.0.1
Logcat can be provided if needed
This is an amazing mod. Using 4.2 on one plus 7 pro Android 10. The thread looks dead. I stumbled across it in Google search. Instructions need to be a bit clearer. It also won't install unless you install the sound alive APK. I chose the version closest to the date of 4.2 It really is night and day difference. Much better than the usual distorted sound of viper (for me). Using with digital plus. Sounds stronger than Atmos. Thanks.
Hello everyone, I didn’t go to this resource for a long time, as soon as free appeared, I solved many problems
Version 4.3.1:
- Fixed bootlap on android 9 and 8
- Fixed installation freezing
- Fixed installation failure due to Busybox in recovery and terminal
- Added automatic recovery in case of failure, if changes were made
- Optimized installer
- Optimized and tuned audio engine from captured Galaxy S9 dumps
- Edited SoundAlive settings
Added option to restore audio to a bt headset, a number of options have been removed and changed
https://forum.xda-developers.com/android/apps-games/audio-engine-samsung-galaxy-s8s9-t3904527
Rumin133 said:
The sound really got better.
But bootlup on the latest version. Previous worked.
Sharp aquos p1 device
OS: Android 6.0.1
Logcat can be provided if needed
Click to expand...
Click to collapse
Hello try the new version.
Roman_city said:
Hello everyone, I didn’t go to this resource for a long time, as soon as free appeared, I solved many problems
Version 4.3.1:
- Fixed bootlap on android 9 and 8
- Fixed installation freezing
- Fixed installation failure due to Busybox in recovery and terminal
- Added automatic recovery in case of failure, if changes were made
- Optimized installer
- Optimized and tuned audio engine from captured Galaxy S9 dumps
- Edited SoundAlive settings
Added option to restore audio to a bt headset, a number of options have been removed and changed
https://forum.xda-developers.com/android/apps-games/audio-engine-samsung-galaxy-s8s9-t3904527
Click to expand...
Click to collapse
Many thanks. Big fan. ?
Edit: removed 4.2 and installed 4.3.1. Much clearer sound. OnePlus 7 pro Android pie. Using together with ice sound profile 1 and Dolby digital from repeye. Sound is truly amazing. Thanks again.
tropical cactus said:
Many thanks. Big fan.
Edit: removed 4.2 and installed 4.3.1. Much clearer sound. OnePlus 7 pro Android pie. Using together with ice sound profile 1 and Dolby digital from repeye. Sound is truly amazing. Thanks again.
Click to expand...
Click to collapse
I'm glad you liked it)
Roman_city said:
I'm glad you liked it)
Click to expand...
Click to collapse
Please continue your great work. Hopefully, you could get it to work on Android 10 and more people will try it.
Thanks for this topic and very useful info...
Version 4.4:
- Updated installer for the new Magisk
- Updated audio engine
- Updated Sound Alive
- Alsa configuration port, qcom and exynos only
- Connected soundalive via alsa, only for qcom and exynos
- Setting up the audio engine based on the latest Galaxy S9 firmware using a disassembler
- Redesigned general sound panorama
- Added interface in the terminal emulator, for managing effects, in the test
Called by the command: sae
- Added automatic cleaning of the dalvik-cache and reboot
Samsung Audio Engine
STEREO-HIFI-PREMIUM only for AOSP 9.0.
Author Big_Brazer , I just tested and made it a module for Magisk.
This is not a port , the mod is made entirely on the aosp 9.0 files of our device.
Not to be confused with the stereo mod for two speakers, this is not about it.
*
v1.4
The sampling frequency of the audio is increased to 862000hz
Audio frequency up to 32bit
The Bluetooth A2DP driver now has support for 128bit 768000hz.
Improved effects surround_sound the back of the stage and improved audio depth.
===
v1.5
Activated Auro 11.1
*
It is recommended to install on a clean system without any audio modifications in the form of Dolby, ViPER4Android and others because they still cut the quality of the signal under its configuration.
P.S. perhaps they you more not will need.
How to check if it's working ???
v1.5
Activated Auro 11.1
For what is this mod ? I just edit mixer paths to 92 lvl instead of 72 and sounds wonderful .
noskojv said:
v1.5
Activated Auro 11.1
Click to expand...
Click to collapse
Well you changed the mp3 decoder's channel-count from 2 to 11.1, it's really make sense?
Developer. said:
Well you changed the mp3 decoder's channel-count from 2 to 11.1, it's really make sense?
Click to expand...
Click to collapse
I'm not the author. Try and find out.