Related
JamesDSPManager (Audio Effect Digital Signal Processing library for Android)
This is a REFORMED audio effect for Android. Source code and main app release available on Github:https://github.com/james34602/JamesDSPManager
The GUI is copy from Omnirom DSPManager, but the internal audio engine is enhanced and reformed!
Features:
1. Pro dynamic range compression
2. Bass Boost
--> 2048/4096 order FIR linear phase low shelf bass boost
3. Reverberation (Dual engine reverb)
--> GVerb
--> Progenitor 2
4. 15 bands cubic spline interpolated FIR Equalizer
5. Stereo Widen
6. Triode dual stage vacuum tube simulation
--> Simulate with real mathematical model of 12AX7 tube
6. Auto partitioning high efficient convolution engine
--> Support mono / stereo / full stereo(LL, LR, RL, RR) impulse response
--> Samples per channels should less than 1000000* for stereo
--> Samples per channels should less than 400000* for full stereo
--> Impulse response file support: V4A IRS, FLAC, WAV
Notes:
Convolver have been tested working even in stereo impulse response with 16121304 samples per channels on Snapdragon 820
Supported platform:
1. It should support from KitKat to Nougat.
2. Tested on arm or x86 architecture devices.
Release/Download: https://github.com/james34602/JamesDSPManager/releases
If you look at the source code from Java part, you will find some are similar with Viper4Android, but this is not true.
Viper4Android only open source it's interface, their core drivers source code have never been released.
For convenient sake, I copy some interface code to accelerate my development.
How to compile the source code?
Use eclipse && Android NDK will do the job.
Previous post: https://forum.xda-developers.com/android/apps-games/app-omnirom-dsp-manager-rom-extra-t3185961
Screenshot:
Click me!
This guy are cool! They have tested to use JDSP with v4a! https://forum.xda-developers.com/apps/magisk/module-jamesdspmanager-2017-10-15-v1-1-t3689390
I reach my milestone and made 14 Band Equalizer works @ 32, 64, 126, 200, 317, 502, 796, 1260, 2000, 3170, 5020, 7960, 13500 and 15000 Hz
And more nice bass filters
I have done more on optimize the audio engine, it use less and less CPU usage than before.
So far I have update:
Pure stereo widening.
Reduce band number to 12 bands.
great! this is purely cpu based? can it be hardware accelerated for less CPU utilization?
also a flashable zip would be nice
Tunnel player?
james3460297 , looks very promising. would this bypass the tunnel player that most Samsung phones use allowing for audio visualizers to work?
@james3460297 ... any plan to support magisk module for this ... seems promising. thanks for the works :good:
adewisman said:
@james3460297 ... any plan to support magisk module for this ... seems promising. thanks for the works :good:
Click to expand...
Click to collapse
Currently, I don't have plan to do so, because I don't have magisk framework development experience...
james3460297 said:
Currently, I don't have plan to do so, because I don't have magisk framework development experience...
Click to expand...
Click to collapse
You can check out this module:
https://forum.xda-developers.com/apps/magisk/module-jamesdspmanager-2017-10-15-v1-1-t3689390
If you want to take over development/maintenance of this module I am happy to give you repo ownership, otherwise I don't mind keeping it updated too.
s8m said:
You can check out this module:
https://forum.xda-developers.com/apps/magisk/module-jamesdspmanager-2017-10-15-v1-1-t3689390
If you want to take over development/maintenance of this module I am happy to give you repo ownership, otherwise I don't mind keeping it updated too.
Click to expand...
Click to collapse
I don't have extra time maintain, you could help keeping update if you like to
Before this latest update, I did a lot of test on high efficiency convolution engine, it's CPU consumption are much less than b4
Arm64 support? And do i have to uninstall any sound modifier before install jsdp?
toji12 said:
Arm64 support? And do i have to uninstall any sound modifier before install jsdp?
Click to expand...
Click to collapse
It looks like it works fine on my phone (MT6755, ARM64, Android 7.0) without any additional steps. I just flashed JamesDSPManager-v1.5-HQ-Auto.zip via TWRP recovery. I didn't remove anything or do other things.
James, would it be possible to add a parametric EQ where users can add custom frequencies and Q factor.
There is no parametric EQ on Android that works systemwide, i hope yours will.
Player Sony (updated through Google play), and system equalizer DSP + (compatible from player settings).
Archive removes from the system Dolby Atmos.
Please make a backup before installing the files.
After installing the files, clear the data Google play and reboot the device.
Link
@noskojv Good job,
With Vibe X3, I think we should not remove Dolby App, Without Dolby App, system will set the Dolby flag default as enable, and they will resample everything to 48 Khz.
If you don't like Dolby, you can just remove it in audio_effects.conf.
I checked : Viper , Maxxaudio, your DSP+ here. But ufortunately, nothing supports Hi-Res.
But I think Maxxaudio (Lenovo version with parametric equalizer give best sound - but with >96 Khz file, you need to set Min CPU freq about >800 Mhz
ctheanh said:
@noskojv Good job,
With Vibe X3, I think we should not remove Dolby App, Without Dolby App, system will set the Dolby flag default as enable, and they will resample everything to 48 Khz.
If you don't like Dolby, you can just remove it in audio_effects.conf.
I checked : Viper , Maxxaudio, your DSP+ here. But ufortunately, nothing supports Hi-Res.
But I think Maxxaudio (Lenovo version with parametric equalizer give best sound - but with >96 Khz file, you need to set Min CPU freq about >800 Mhz
Click to expand...
Click to collapse
There is always a choice
Which magisk modules are out there for the oneplus one?
DemonX99 said:
Which magisk modules are out there for the oneplus one?
Click to expand...
Click to collapse
I remember "mic fix" and "stereo mod".
arise and root
There are a lot out there..!
Actually there are a lot out there but it depends on you what is required to you for example i wanted better music so i installed viper4Android so for your question there are a lot out there but you need to install only what you need. so here goes my favourite list.
CrossBreeder Lite Edition
CrossBreeder is a set of mods that are used to modify system performance as well as conserve battery life. While the original project required proper /system access, it has now been ported to work with Magisk, and it works exceptionally well. You can use it to reduce the lag, increase your entropy levels, get more juice out of your device and speed up your mobile.
Audio Modification Library
There are a number of sound mods available for rooted Android devices, like the aforementioned Viper4Android, AM3D Zirene and Dolby Atmos . Based upon your liking, you may want to one of them. But what if you like different features of different mods, but installing both mods at the same time would result in a system failure for you? Well, Audio Modification Library is a Magisk module that overcomes Magisk’s limitation of installing multiple audio mods, and does not cause any compatibility issues.
Viper4Android or AM3D Zirene
Viper4Android is by far one of the most feature-rich and advanced music mod out there for Android. It lets you alter almost each and every aspect of your device’s audio capabilities, thus giving you full control. It lets you customize the audio performance of your device’s speaker, Bluetooth speaker, headset or even a dock. The app not only increases the volume of the audio on your device but also improves bass & clarity, thanks to the cool ViPER Clarity and XHiFi technology.
Even though the interface is fairly easy to use, one might get confused with so many choices at their disposal. If so, you could opt with the AM3D sound mod by Zirene, which offers a simple and minimalistic interface, allowing easy tweaking around with the audio profiles for your system.
Dolby Atmos
Lenovo had introduced Dolby’s Atmos Sound technology to their devices a couple of years ago, something that was widely appreciated. The Dolby Atmos Magisk mod brigs the Dolby Atmos audio enhancements to any Android smartphone. The mod offers simple yet efficient sound modifications to the overall audio quality of one’s device. This app, which was earlier exclusive to Lenovo’s ROMs, has now been ported to Magisk, so that it can work systemlessly. You can customize the audio quality of music, movies, games, voice, etc. There are a lot of options here and if you are an audiophile, you will definitely appreciate the features on offer.
Android Mic Fix
Many a times, after flashing a new ROM or firmware, you may experience a loss in the mic quality of your device. The reason behind this is that most of times your build.prop file is tampered with by the developers which causes the aforementioned issue. The Android Mic Fix, as the name suggests, aims to fix this problem with the help of the “resetprop” tool to modify your build.prop file.
Hit thanks if I helped you.
Hi everyone. Wenn I brows through the forum, I never finded setting or mods for audio by mido.
It could be stay everything about sound mode in this one place. Please, put here your knowledges about best sound mods for Miui roms and Oreo roms. Whats the best.
For example. Now I use Omni rom on my mido and also it has own equaliser, the sound, volume, I made through the another kernel( Franco) and kernel audiutor - sound - volume steps. Bass and trebble about dolby atmos. Somebody from us need higher volume on ringing, outsides jobs etc.
Thanx all for your posting and knowledges.
funny210980 said:
Hi everyone. Wenn I brows through the forum, I never finded setting or mods for audio by mido.
It could be stay everything about sound mode in this one place. Please, put here your knowledges about best sound mods for Miui roms and Oreo roms. Whats the best.
For example. Now I use Omni rom on my mido and also it has own equaliser, the sound, volume, I made through the another kernel( Franco) and kernel audiutor - sound - volume steps. Bass and trebble about dolby atmos. Somebody from us need higher volume on ringing, outsides jobs etc.
Thanx all for your posting and knowledges.
Click to expand...
Click to collapse
try Ainur Sauron + JamesDSP Audio Manager + Dolby Atmos™ Axon7 Oreo Port i using on aosip oreo latest build working great.
Thanks. What else fór Miui roms? I am on My globe Rom.
funny210980 said:
Thanks. What else fór Miui roms? I am on My globe Rom.
Click to expand...
Click to collapse
all those required oreo roms...and nothing else these all give me best sound combo
rajus6667 said:
try Ainur Sauron + JamesDSP Audio Manager + Dolby Atmos™ Axon7 Oreo Port i using on aosip oreo latest build working great.
Click to expand...
Click to collapse
Can you help out in flashing all these??
Link?
I have installed Viper through Magisk and is working flawlessly! I am on RR Remix 8.1.0 by Endless!
Maybe it's late, but I still come with a recommendation--poweramp is the best choice for you.
I 've tried dolby,viperfx,audiofx, ainur, mi sound enhancer and so on, among which viperfx and mi sound enhancer(in miui) are the best ones.
But I have to say that they cause the quality of sound a little bad, and if you don't care much about the details of sound, you can try them.
The reason why I recommend poweramp is that poweramp hardly ever affect the quality of sound even if you set maximum bass and treble.
Termintor said:
Maybe it's late, but I still come with a recommendation--poweramp is the best choice for you.
I 've tried dolby,viperfx,audiofx, ainur, mi sound enhancer and so on, among which viperfx and mi sound enhancer(in miui) are the best ones.
But I have to say that they cause the quality of sound a little bad, and if you don't care much about the details of sound, you can try them.
The reason why I recommend poweramp is that poweramp hardly ever affect the quality of sound even if you set maximum bass and treble.
Click to expand...
Click to collapse
Yeah that's true but Poweramp is not Oreo friendly for now, it's unstable and the notification controls are useless. It's my favourite music player but it's painful to use in Oreo ROMs.
Miui + Ainur + Dirac sound best to me.
Where can I download dirac sound?
OH ye, dirac is in miui included. Od course. Best for us. Download links. Extra for Miui and for Oreo roms (stock). Please.
wiikii said:
Can you help out in flashing all these??
Link?
Click to expand...
Click to collapse
yes
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
https://forum.xda-developers.com/android/apps-games/app-reformed-dsp-manager-t3607970
https://forum.xda-developers.com/android/software/app-dolby-atmos-axon-7-oreo-port-t3740508
funny210980 said:
OH ye, dirac is in miui included. Od course. Best for us. Download links. Extra for Miui and for Oreo roms (stock). Please.
Click to expand...
Click to collapse
Ainur and Addons (Dirac, James... ) sound mod you can find in this thread.
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516
Install Audio Modification Library (AML) - Download in Magisk or this thread if you wanna use multi sound mods.
https://forum.xda-developers.com/apps/magisk/mod-audio-modification-library-t3745466
P/s There is no best for anyone. Just try yourself.
Fantastic
Short description:
The combined port of the audio engine of Samsung Galaxy S8 and Galaxy S9
The global influence on the sound device, whether it be the sound from the browser, polyphony, microphone recording and audio player
Increases the detail, clarity, volume and selection of instruments in the track being played.
Treated vocals become more lively, deep and saturated low frequencies.
With a long listening to music does not occur discomfort in the ears.
Loss quality audio fixes.
The ability to control proprietary SoundAlive audio effects such as:
- Clarity
- Bass Treble
- Vocal Instrumental
- Concert Hall
- Tube Amp Pro
- Sorround
- 9 band EQ with presets configured
- UHQ Upscaler
- Rehampler UHQ
- Dolby Atmos
Features:
- HiRes effects are ported and used, (list above), ie when listening to music 32/384 or 24/192 and so on, the processing will take place at the same bit rate and frequency
- Dolby Atmos has full support for androids 9.0 and below
Smart installer:
- Support installation via Magisk and determining whether it is embedded in the system
- Support installation directly in the system without disconnecting the device through the terminal emulator, if recovery is not available
- Automatic creation of backup, all replaceable and editable files
- Automatic selection of installation on 32 and 64 bit systems
- Fully deleted, the installer is also an uninstaller, to delete, you must reinstall the archive in the recovery or magic, then the removal process will go
Settings soundalive:
You don’t need the presence of root for the engine, but it is needed to manage its settings.
Settings are stored in /system/etc/soundalive/SoundAlive_Settings.xml
If this file does not appear, flash SoundAlive again.
To apply the settings you will need to restart or restart the interface, which is much faster
Enter the following commands in the terminal:
su
am restart
Effects designed for individual outputs speaker, bluetooth, headphones.
BT__ - Bluetooth Headset
SPK__ - phone speaker
EAR__ - headphones
1 enabled, 0 disabled
Example:
<int name = "BT__SA_GLOBAL_EFFECT_SURROUND" value = "0" /> Effect disabled
<int name = "BT__SA_GLOBAL_EFFECT_SURROUND" value = "1" /> Effect enabled
INSTRUMENTAL_VOCAL
Instrumental Vocal Regulator
Values from -8 to 8, where 0 is disabled, to -8 more instrumental part is allocated, up to 8 vocals are allocated
BASS_TRABLE
Low and high frequency control
Values from -8 to 8, where 0 is disabled, -8 bass is allocated, up to 8 high frequencies
EQ
Presets for 9 band EQ:
0 - Normal
1 - Pop
2 - Classic
3 - Jazz
4 - Rock
5 - Customizable (manual equalizer adjustment is available on this preset only)
SA_SQUARE_INDEX
Clarity
Makes the sound more lively and clear.
Values 36, 38, 40, 42
SA_GLOBAL_EFFECT_DOLBY
SA_GLOBAL_EFFECT_DOLBY_OLD
Dolby atmos
A playback system that provides incredibly surround sound and surround sound effect.
To activate the effect, you need to enable, for example, preset music.
DOLBY value = "3"
DOLBY_OLD value = "3"
To disable everywhere put 0
0 - disabled
1 - auto
2 - movies
3 - music
4 - voice
SA_GLOBAL_EFFECT_SURROUND
Sorround
Create a rich surround sound effect.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_TUBE_AMP
Tube amp pro
Emulate the tone of a tube amp.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_CONCERT_HALL
Concert hall
Sound effect in the concert hall.
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_UHQ
SA_GLOBAL_EFFECT_UHQ_OLD
UHQ Upscaler
Improve sound quality when playing music and videos for the best listening experience.
To enable, put 1 on both versions
UHQ value = "1"
UHQ_OLD value = "1"
0 - disabled
1 - enabled
SA_GLOBAL_EFFECT_PBM_UHQ_OLD
UHQ Re-sampler
For BT:
0 - off
1 - 96 KHz
For EAR:
0 - disabled
1 - 192 KHz
2 - 384 KHz
SA_LIST_INDEX
3D processing, 5 presets, each has its own sound
0 - disabled
1-5 included
SA_EQ_INDEX_0, frequency 63
SA_EQ_INDEX_1, frequency 125
SA_EQ_INDEX_2, frequency 250
SA_EQ_INDEX_3, frequency 500
SA_EQ_INDEX_4, frequency 1k
SA_EQ_INDEX_5, frequency 2k
SA_EQ_INDEX_6, frequency 4k
SA_EQ_INDEX_7, frequency 8k
SA_EQ_INDEX_8, frequency 16k
9 band equalizer
Values from -10 to 10, where 0 is disabled, down to -10 lowers the amplitude of frequencies, increases to 10 to 10
Important for samsung phones:
Incompatible with official firmware and ports based on them
The list of supported firmware is possible and not all of them will work:
Lineage os
RR
Aosp
And all based on los and do not write about other ports (custom)!
Click to expand...
Click to collapse
Version 4.4:
- Updated installer for the new Magisk
- Updated audio engine
- Updated Sound Alive
- Alsa configuration port, qcom and exynos only
- Connected soundalive via alsa, only for qcom and exynos
- Setting up the audio engine based on the latest Galaxy S9 firmware using a disassembler
- Redesigned general sound panorama
- Added interface in the terminal emulator, for managing effects, in the test
Called by the command: sae
- Added automatic cleaning of the dalvik-cache and reboot
Changed the installation procedure for version 4.4:
1. After installing the engine, the dalvik cache will be automatically cleaned, then the phone should reboot, it will be necessary to wait ...
2. Set SA_Settings
3. Reboot
And enjoy the music
Uninstall:
Run the installer in recovery and the removal process will go
Android required: 5.0+
Recommended Android version: 7.0-9.0
Interface: No
System: 32/64/x86
Stable version: 4.4
Samsung Audio Engine V4.4: Download
SA Settings R8: Download
XDA:DevDB Information
[PORT][AUDIO] Samsung Audio Engine, App for all devices (see above for details)
Contributors
Roman_city
Version Information
Status: Stable
Current Stable Version: 4.3.1
Stable Release Date: 2020-01-09
Created 2019-02-25
Last Updated 2020-02-02
Reserved
Changelog:
Version: 4.2 | 10.05.2019
- Added Magisk support
- Added Speex from S9 improves speech processing
- Fixed bug with hanging outgoing and incoming calls
- Fixed bootloop on mtk android 8.1
- Fixed errors in the engine
- Fixed bugs in UHQ resampler
- Cut conflict files
- Adjustment in sound
Version: 4.1 | 25.02.2019
- Fixed bugs
- Added and corrected system file permissions
- Rewritten installation process
- High resolution effects for androids 5-6 included
- Fixed partition mounting
- Fixed installation process via terminal
- Added option resampler UHQ Upscaler
Version: 4.0 | 03.02.2019
- Updated SoundAlive52 to version 54 from Galaxy S9 9.0
- Added support for high resolution effects.
- Included high-resolution effects, ported from Galaxy S9 9.0 for Android 7.0-9.0, for Android 5.0-6.0 the standard resolution is used
- Fixed Dolby, UHQ effects
- Added choice of quality UHQ Upscaler
Resampler UHQ support:
Bluetooth:
Normal 44.1 kHz
UHQ 96 kHz
Headphones:
Normal 48 kHz
UHQ 192 kHz
SUHQ 384 kHz
- Security update for the engine
- Combined Galaxy s8 engine with Galaxy s9
- Added support for audio pro, low latency if system supports
- Updated pro audio driver
- Removed installation of Google media effects on systems without gapps - this has a good effect on sound
- Improved compatibility with android 5.0-6.0, 9.0
- Updated soundalive settings
- Fixed installer errors
Version: 3.0 | 12.01.2019
- Bugs fixed
- Improved compatibility with android 9.0
- Migrated sound
Version: 2.2 | 31.12.2018
- Updated DolbyAtmos from the latest Galaxy S9 update android 9.0 Pie
- Effects fixes
- Minor installer changes
- Balanced sound
Version: 2.1 | 24.12.2018
- Fixed bootloop on android 9.0 Pie
Version: 2.0 | 23.12.2018
- Fully updated engine from the latest version of the firmware Galaxy S8
- Ported SoundAlive from Galaxy S9
- Ported DolbyAtmos from Galaxy S9
- Added the ability to manage SoundAlive settings and effects such as:
Dolby Atmos
Concert Hall
Tube Amp Pro
Sorround
UHQ Upscaler
3D
EQ
- Fixed compatibility issues with some devices.
- The function that from long listening to music does not cause discomfort in the ears
Version: 1.0 | 28.11.2018
- Ported audio engine from Samsung Galaxy S8
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Interesting, got to try it.
Thanks Dev.
Nice! Thanks for that, now about the Mod
The App force close, is that normal? Are we supposed to edit the settings in the System Files?
Edit: Yes
Is there any apps SoundAlive? Cause I don't see it, but SoundAlive.xml is there.
For sure, my existing Dolby atmos crash.
teatea said:
Is there any apps SoundAlive? Cause I don't see it, but SoundAlive.xml is there.
For sure, my existing Dolby atmos crash.
Click to expand...
Click to collapse
Yes there is, it just does not show up on the Drawer, but you can see it on your Apps List
Guilhermex12 said:
Yes there is, it just does not show up on the Drawer, but you can see it on your Apps List
Click to expand...
Click to collapse
Well, somehow I can't open it. I try to use Sony Music - Setting - Sound Effect, doesn't show.
And most importantly, my Dolby atmos crash.
teatea said:
Well, somehow I can't open it. I try to use Sony Music - Setting - Sound Effect, doesn't show.
And most importantly, my Dolby atmos crash.
Click to expand...
Click to collapse
You actually can't use the app, at least for now, you must edit the settings via the Soundalive.xml file.
And what Dolby Atmos are you talking about? Are you on Oreo?
Guilhermex12 said:
You actually can't use the app, at least for now, you must edit the settings via the Soundalive.xml file.
And what Dolby Atmos are you talking about? Are you on Oreo?
Click to expand...
Click to collapse
I'm on Nougat. On my oreo and pie devices, atmos doesn't work. I keep my Nougat devices only for atmos.
No chance to install on official samsung j7 nougat rom ?
teatea said:
I'm on Nougat. On my oreo and pie devices, atmos doesn't work. I keep my Nougat devices only for atmos.
Click to expand...
Click to collapse
Ah, got it
The sound really got better.
But bootlup on the latest version. Previous worked.
Sharp aquos p1 device
OS: Android 6.0.1
Logcat can be provided if needed
This is an amazing mod. Using 4.2 on one plus 7 pro Android 10. The thread looks dead. I stumbled across it in Google search. Instructions need to be a bit clearer. It also won't install unless you install the sound alive APK. I chose the version closest to the date of 4.2 It really is night and day difference. Much better than the usual distorted sound of viper (for me). Using with digital plus. Sounds stronger than Atmos. Thanks.
Hello everyone, I didn’t go to this resource for a long time, as soon as free appeared, I solved many problems
Version 4.3.1:
- Fixed bootlap on android 9 and 8
- Fixed installation freezing
- Fixed installation failure due to Busybox in recovery and terminal
- Added automatic recovery in case of failure, if changes were made
- Optimized installer
- Optimized and tuned audio engine from captured Galaxy S9 dumps
- Edited SoundAlive settings
Added option to restore audio to a bt headset, a number of options have been removed and changed
https://forum.xda-developers.com/android/apps-games/audio-engine-samsung-galaxy-s8s9-t3904527
Rumin133 said:
The sound really got better.
But bootlup on the latest version. Previous worked.
Sharp aquos p1 device
OS: Android 6.0.1
Logcat can be provided if needed
Click to expand...
Click to collapse
Hello try the new version.
Roman_city said:
Hello everyone, I didn’t go to this resource for a long time, as soon as free appeared, I solved many problems
Version 4.3.1:
- Fixed bootlap on android 9 and 8
- Fixed installation freezing
- Fixed installation failure due to Busybox in recovery and terminal
- Added automatic recovery in case of failure, if changes were made
- Optimized installer
- Optimized and tuned audio engine from captured Galaxy S9 dumps
- Edited SoundAlive settings
Added option to restore audio to a bt headset, a number of options have been removed and changed
https://forum.xda-developers.com/android/apps-games/audio-engine-samsung-galaxy-s8s9-t3904527
Click to expand...
Click to collapse
Many thanks. Big fan. ?
Edit: removed 4.2 and installed 4.3.1. Much clearer sound. OnePlus 7 pro Android pie. Using together with ice sound profile 1 and Dolby digital from repeye. Sound is truly amazing. Thanks again.
tropical cactus said:
Many thanks. Big fan.
Edit: removed 4.2 and installed 4.3.1. Much clearer sound. OnePlus 7 pro Android pie. Using together with ice sound profile 1 and Dolby digital from repeye. Sound is truly amazing. Thanks again.
Click to expand...
Click to collapse
I'm glad you liked it)
Roman_city said:
I'm glad you liked it)
Click to expand...
Click to collapse
Please continue your great work. Hopefully, you could get it to work on Android 10 and more people will try it.
Thanks for this topic and very useful info...
Version 4.4:
- Updated installer for the new Magisk
- Updated audio engine
- Updated Sound Alive
- Alsa configuration port, qcom and exynos only
- Connected soundalive via alsa, only for qcom and exynos
- Setting up the audio engine based on the latest Galaxy S9 firmware using a disassembler
- Redesigned general sound panorama
- Added interface in the terminal emulator, for managing effects, in the test
Called by the command: sae
- Added automatic cleaning of the dalvik-cache and reboot
Samsung Audio Engine