Which magisk modules are out there for the oneplus one?
DemonX99 said:
Which magisk modules are out there for the oneplus one?
Click to expand...
Click to collapse
I remember "mic fix" and "stereo mod".
arise and root
There are a lot out there..!
Actually there are a lot out there but it depends on you what is required to you for example i wanted better music so i installed viper4Android so for your question there are a lot out there but you need to install only what you need. so here goes my favourite list.
CrossBreeder Lite Edition
CrossBreeder is a set of mods that are used to modify system performance as well as conserve battery life. While the original project required proper /system access, it has now been ported to work with Magisk, and it works exceptionally well. You can use it to reduce the lag, increase your entropy levels, get more juice out of your device and speed up your mobile.
Audio Modification Library
There are a number of sound mods available for rooted Android devices, like the aforementioned Viper4Android, AM3D Zirene and Dolby Atmos . Based upon your liking, you may want to one of them. But what if you like different features of different mods, but installing both mods at the same time would result in a system failure for you? Well, Audio Modification Library is a Magisk module that overcomes Magisk’s limitation of installing multiple audio mods, and does not cause any compatibility issues.
Viper4Android or AM3D Zirene
Viper4Android is by far one of the most feature-rich and advanced music mod out there for Android. It lets you alter almost each and every aspect of your device’s audio capabilities, thus giving you full control. It lets you customize the audio performance of your device’s speaker, Bluetooth speaker, headset or even a dock. The app not only increases the volume of the audio on your device but also improves bass & clarity, thanks to the cool ViPER Clarity and XHiFi technology.
Even though the interface is fairly easy to use, one might get confused with so many choices at their disposal. If so, you could opt with the AM3D sound mod by Zirene, which offers a simple and minimalistic interface, allowing easy tweaking around with the audio profiles for your system.
Dolby Atmos
Lenovo had introduced Dolby’s Atmos Sound technology to their devices a couple of years ago, something that was widely appreciated. The Dolby Atmos Magisk mod brigs the Dolby Atmos audio enhancements to any Android smartphone. The mod offers simple yet efficient sound modifications to the overall audio quality of one’s device. This app, which was earlier exclusive to Lenovo’s ROMs, has now been ported to Magisk, so that it can work systemlessly. You can customize the audio quality of music, movies, games, voice, etc. There are a lot of options here and if you are an audiophile, you will definitely appreciate the features on offer.
Android Mic Fix
Many a times, after flashing a new ROM or firmware, you may experience a loss in the mic quality of your device. The reason behind this is that most of times your build.prop file is tampered with by the developers which causes the aforementioned issue. The Android Mic Fix, as the name suggests, aims to fix this problem with the help of the “resetprop” tool to modify your build.prop file.
Hit thanks if I helped you.
Related
Hey XDAians,
Everyone just loves music and audio mods in xda are just perfect for us.
But there are many mods and it is hard to decide which one to use ??
So i have created this thread so that we can discuss about these mods and we can obtain the best combination among these.
You are free to comment anything about these mods or the other mods that are not mentioned here
You can also comment tricks and tips which will help to increase sound quality.
So lets begin !!
Official ViPER4Android Audio Effects
eXtremeBeats™ Audio mod
XTREMEMusic™ Super mod
Beats Audio mod
ViPER|Audio || ViPER|Atmos || ViPER|DD+ Driver Stock*Sony*Beats
DivineBeats Sound mod
Thanks for the mention.
eXtremeBeats started out as a small experiment for me at first. It was a mod I used myself, and then wanted to share.
eXtremeBeats primary function is to enhance music on any rooted android phone. Many phones, especially lower end phones tend to lack in audio quality. This is caused by a number of factors; software limitations, hardware limitations and the listening device connected to your phone. With some of the best hand picked mods from XDA we are able to ' soften ' and even eliminate these limitations. Whether it's a noisy environment for your DAC, Low quality DAC or Volume/Software restrictions these hand picked mods can work in real time to greatly enhance your audio experience. With mods like Beats Audio, Pure Audio, Dolby and Sony ClearAudio working together you are sure to have the best listening experience around even with a $50 android device!
hello, is it possible to port the dolby atmos with snapdragon on exynos?
thanks for the answer
Yes, search for viper4arise. It also includes a Dolby Atmos module, although I like the Viper app itself more.
you do not understand me correctly, I want it from the Samsung because many optimizations come from the developer, for example, when I had a stock to 4 note, the sound was much nicer than on a custom with the same mod, eventually after the mod set the positioning was lost altogether
Hi,
I send Feedback about it to Xiaomi and they said this:
"Dear user,
I am the Xiaomi user feedback group. The feedback about the Equalizer. Due to the adjustment of Xiaomi business, the Q version no longer provides this function, which is inconvenient for you."
So dont expect it on the future versions.
Solution for missing sound setup.
perfect_ said:
Hi,
So don't expect it on the future versions.
Click to expand...
Click to collapse
Not that the stock equalizer that came from Android Pie was any good. We just need people to try and revive the old DogsBark team (Noozxoide Laboratories) and make rootless DSP. I have nothing against Viper, don't get me wrong, on my other device I use Viper Audio, root and all that stuff... but sometimes you just need to stick to the old user/non-dev ways. I am sure it's possible, the problem is the financing and the will to do it. For me, the app developed by them and last updated in 2013 worked like a charm on many devices... except this one, since november update... That's when the problems started to appear.
Since then, I've been looking not just for an equalizer, but a self contained DSP pack that would work better and guess what, nothing's there... nothing except apps with built in function (which by definition are not system wide) and crappy adware.
As for the "Xiaomi business" this really shows me that Xiaomi really gave up on the development of this device, and ALL stock Xiaomi apps will be gone, replaced by Qualcomm's apps... and I don't ever recall seeing any DSP coming directly from Qualcomm.
----------Later addon----------
While the PRO version of Noozxoide EIZO-Rewire PRO has the problems mentioned it seems that the second software Noozxoide EIZO-Rewire Elemental which works even better is still compatible and working just fine on Android 10. Right now it's in testing and benchmarking... which is not an easy job to do, but as long as I love quality music I will do it and post results/download links for it.
-----Download Software-----
Download the Noozxoide EIZO-Rewire Elemental from HERE.
-----Testing abstract-----
For the following tests, were done using only hi-res audio (FLAC/ALAC 96khz 3mbps) files and 320kbps mp3 files so results may vary compared to what I tested here. Remember that streaming services use low bitrate/extremely compressed content.
---Test Speakers---
Internal audio speakers has a good response, bass is there audible, resolution is good, in this case I cannot post any reference to advanced graphs since they are irrelevant in this case.
The best settings (for me) are posted in the first screenshot here. While this is my recommendation, the software doesn't go overboard and keeps the audio quality in control. While testing all the test tracks which varies from Rock/Metal to Acoustic to a more aggressive dubstep there were absolutely NO cracks and pops in audio output from the speaker (which is a result of poor equalization/frequencies outside the speaker range).
---Test Line-Out/Amplified output---
Headphones (because of my current limitations of testing - a conclusive test would be source file vs. processed audio output and multiple headphone test - in ear, open back, ported, etc) were only tested with 3.5mm jack Apple EarPods which are well known to have the best consumer grade frequency response I found that the 2nd attached screenshot works best (for me). While some FLAC files with really deep bass (about 6-10Hz) totally overrun them (and not the Qualcomm audio processor) I would say that this DSP (VSP) works just fine on our devices.
I don't know if I should leave a placeholder here for the advanced, audiophile grade, passive amplified headphones.
---Test Wireless Audio---
Bluetooth and wireless media. Works just as expected. Test were done only with a Nokia BH-503 headset (couldn't test on the car, and neither did I want to spend time going to the car and test it on the BMW Pro-Logic system) but on those headset it made them literally vibrate on the ears, extremely good quality sound, deep bass, crystal clear trebbles and warm mid-tones. Again, I didn't manage to get a single crackle or pop on the speaker drivers which means the equalization done by this engine is sensible and perfectly limited/compressed. The settings I used are posted in the third screenshot.
-----Conclusion-----
The solution posted here works fine, while extensive testing the app still shows that is consumed 0% battery, so the battery drain is minimal.
The application works perfectly after reboot and closing from the recents screen, there were no modifications done/or excluded from the battery optimization screen.
This application is not a booster, this application is a DIGITAL SOUND PROCESSOR controlling the Qualcomm core (was built for this back in the day) and upscaling the audio resolution.
-----Q/A-----
Q: Does this app require any tampering with the system?
A: No, this app is installed as a normal app from the link provided (Play store link)
Q: Does this app work as a system wide equalizer and integrates in other apps?
A: Yes, yes it does, and from my testing it works with all media players (the equalizer option opens up the app), Youtube, Games, etc.
Q: Does this app consume system resources while processing?
A: Yes and no. Of course you need system resources for processing but they aren't that intensive at least for MP3 processing but for FLAC/ALAC processing things get a little more frisky as shown in the 4th screenshot attached.
Q: How's the battery drain overall with FLAC and MP3 playback?
A: Depending on the method of listening the drainage is different, but even on Bluetooth the consumption didn't affect my battery overall.
Q: Does this enable AptX?
A: No. This has nothing to do with that. But while AptX and SBC are not that different in base audio quality, this pushes the codec to 328kbps and upscales the audio to a resolution of 48khz which is ideed great for maxed out mp3 quality over Bluetooth, which again is based on the source files.
----------Thanks----------
If this problem helped you fixed a problem, press the thank you button.
Just wanted to know if it's worth debloating Dolby before installing narsil/viper?
Yes, and it is best to debloat Dolby and install this application to fully control Dolby Atmos and even disable it - Dolby Atmos APK
Rayekk said:
Yes, and it is best to debloat Dolby and install this application to fully control Dolby Atmos and even disable it - Dolby Atmos APK
Click to expand...
Click to collapse
So if i've debloated Dolby why would i install this particular dolby apk?
The system Dolby had only 4 ready settings to choose, this application is a full equalizer, and additionally allows you to completly turn off Dolby, and it seems to me that debloat did not turn Dolby off, but turned off the settings panel.
Besides, in my opinion Dolby controlled by this app works better than Viper, it is not a system application, you can uninstall it at any time, so it's worth checking it out.
Rayekk said:
The system Dolby had only 4 ready settings to choose, this application is a full equalizer, and additionally allows you to completly turn off Dolby, and it seems to me that debloat did not turn Dolby off, but turned off the settings panel.
Besides, in my opinion Dolby controlled by this app works better than Viper, it is not a system application, you can uninstall it at any time, so it's worth checking it out.
Click to expand...
Click to collapse
Ok thanks for your help
Rayekk said:
The system Dolby had only 4 ready settings to choose, this application is a full equalizer, and additionally allows you to completly turn off Dolby, and it seems to me that debloat did not turn Dolby off, but turned off the settings panel.
Besides, in my opinion Dolby controlled by this app works better than Viper, it is not a system application, you can uninstall it at any time, so it's worth checking it out.
Click to expand...
Click to collapse
"This app works better than Viper". You can't even compare them since they have completely different sound processing possibilities. Viper is much more advanced and has many sound processing options to adjust/choose from (including correction files for headphones "VDC"). Dolby is just Dolby, nothing much apart from it.
ekin_strops said:
"This app works better than Viper". You can't even compare them since they have completely different sound processing possibilities. Viper is much more advanced and has many sound processing options to adjust/choose from (including correction files for headphones "VDC"). Dolby is just Dolby, nothing much apart from it.
Click to expand...
Click to collapse
As I said, it's just my opinion, personally I prefer Dolby more than Viper, That's all.
Thanks, it's easier to use than viper
Hi, i am looking for system wide parametric EQ for android that also works on built in speaker mode. I do have root access on my device and i already tried Viper4Android and JamesDSP but Viper4Android does not have parametric EQ and even it has convolution EQ as far as i know, i does not seems to be available in built in speaker mode. JamesDSP on the other hand, does not have parametric EQ either and even if it had, when i turn on JamesDSP on my device, it makes audio crack and stutter. I do have AudioModificationLibrary already installed on Magisk. I also tried Poweramp Equalizer on Google Play Store but it limits gain values to max 15dB which is not enough for me at least while equalizing my built in speaker. I could not find any solution yet on internet. Any help is appreciated!
bump. I'd like to know too.