Related
Hello, here a plea for help.
I tried to flash my stock N8000 via this post: https://forum.xda-developers.com/showthread.php?t=1957002
I did try this several times, but it never completed: see the attached screen shot of what happens.
Now the device no longer boots normally. It begins to boot, then hangs on the Samsung logo.
Can someone help me here, as the original post seems dead....
thanks.
Start by flashing stock rom through Odin .
JJEgan said:
Start by flashing stock rom through Odin .
Click to expand...
Click to collapse
Hello, and thanks for responding. Could you give me a hint/howto on where the standard ROM might be, and how to flash, or where to read up on that?
Sorry, a bit of a noob on this...
thanks.
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
JJEgan said:
Firmware Updato.com or sammobile.com
howto use odin
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Click to expand...
Click to collapse
Thanks. Am driving right now. I'll try this later this evening.
Sent from my SM-N920C using Tapatalk
JJEgan said:
Firmware Updato.com or sammobile.com
Hello, as the device no longer boots its difficult to tell exactly which device it is, as there are at least 4 devices that seem to fit my device description. I've got the N8000, from GErmany, i received it as part of a package from E-plus. From that information there are 4 device ROM's available....one as late as 2015. Which should i take?
thanks again.
Click to expand...
Click to collapse
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Hello out there community...no one out there that can help me here? Please? ....
tjohnso1 said:
Hello,
I do need some help now. I believe i've followed all directions, but am not having success.
Again, my device is a Samsung N8000 Note 10.1. Purchased from Eplus Germany
I have read the directions in how to use Odin, and have followed them precisely.
Drivers installed.
Original Firmware downloaded (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar). But, in the compresesed file that I downloaded there was also another file (SS_DL.dll). Anyone know what this means?
I copied both files into the directory of Odin v3.12.13.
began Odin, then put the tablet into download mode, then connected it to my computer. There was a sound from my computer recognizing the tablet.
I then added the file firmware file (N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar) into Odin under the AP tab. I checked that the re-partiton box was not checked, then klicked onto Start. But Odin failed after about 3 seconds.
Can anyone please help me here?
thanks.
Click to expand...
Click to collapse
JJEgan said:
Use tar file only .
<I copied both files into the directory of Odin v3.12.13.>Never heard of that before .
At a guess Odin cannot find the file or its not connected ID Box in odin shows as connected
Click to expand...
Click to collapse
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
tjohnso1 said:
Thanks for this. I will try this when i'm home this evening...hope it works. Thanks!
Click to expand...
Click to collapse
Hello, sorry but i need some more help here please.
I've downloaded what i believe is the stock firmware for my device from updato.com: GT-N8000_EPL_1_20150303173500_n47626s3xd
This is a zipped package with two file in it:
N8000XXUDNL1_N8000EPLDNL2_N8000XXUDNH1_Home.tar.md5
and
SS_DL.dll
I've put both of these files into the directory where ODIN is. I have downloaded and tried serveral ODIN versions: v1.85, v3.10.6, v3.12.7, v3.12.3, v3.07
None of them work. After loading the tar file, ODIN begins, then after about 3 seconds stops and show the message "fail".
Attached is a screen shot of ODIN once i've loaded the tar file, and one that shows after the fail.
I've also added a picture of my note 10.1 N8000 while in download mode.
Anyone can help me here?
thanks.
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
JJEgan said:
Download file .
Unzip file .
Put file on desktop .
Open Odin
Locate tar file only and add to PDA or AP
firmware that you are trying to install is a downgrade and the secure bootloader (sboot) is blocking it.
Click to expand...
Click to collapse
Hello, and thanks.
What you have described above is exactly what i am doing. Are you saying that the reason it does not work is because the bootloader is blocking it? If so, how do i get around this?
I would really like to "upgrade", rather than downgrade. But at the moment i cannot find any other firmwares for my device. A few years ago I saw several ones, but not anymore.
Do you have a suggestion of which firmware I should install, and where i can get this?
Again, thanks so much for your help! I really appreciate it.
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
JJEgan said:
Looking at sammobile and updato last firmware is .
N8000XXSDQA7 android 4.4.2 .( the last version for note is 4.4.2 )
But they don't list bootloader versions .
Click to expand...
Click to collapse
Hello, i'm not sure what this means. Which version should i use? and how?
That one flashed through Odin and hopefully its a later bootloader
JJEgan said:
That one flashed through Odin and hopefully its a later bootloader
Click to expand...
Click to collapse
Hello,
i tried to flash N8000XXSDQA7, but it also failed. Similar to all the others that i've tried to flash. I must be doing something fundamentally wrong, as the fail happeds after only about 3 seconds.
Any help you can offer? Really appreciate it.
thanks
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
JJEgan said:
I think that the bootloader section of your Note is damaged.The picture you posted shows right method of Odin flash
Click to expand...
Click to collapse
Ok, but what do i do if the bootloader is damaged? Can i fix it or flash it with another bootloader?
thanks.
Yes if you can get another bootloader .
Further steps are beyond my knowledge but have a look here .
https://www.google.co.uk/search?q=x...x-b&gfe_rd=cr&dcr=0&ei=he5VWrvpOOqstgeTsYaICA
Hi guys
I think that i'm doing things right...
1) I have Samsung USB drivers installed
2) I'm using Odin3.11
3) I'm using the correct params for 7.0 ( BL,AP,CP, Home_CSC in Odin )
3) Odin Options ( F.ResetTime, Auto-reboot,Repartion) all unticked
4) On the S7 USB debugging is On
I put the tel in DL mode and here is the list of what Odin spits at me...once launched
Log Screen
-Odin Checking v 3.1101
-File analysis
-Skip file for home binary
-param.bin
-modem_debug.bin
-Home binary Download
-Setup Connection
-Initialisation
-Set PIT for mappjng
-Firmware update Start
-Single Download
-sboot.bin
-Nand Write Start
-cm.bin
FAIL!
Am I missing someting or did something wrong ?
Thks in advance !!
Use ODIN 3.12.3 or newer
And which model S7 is it?
*Detection* said:
Use ODIN 3.12.3 or newer
And which model S7 is it?
Click to expand...
Click to collapse
S7 Flat 930F with Exynos
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
zorglub! said:
S7 Flat 930F with Exynos
Click to expand...
Click to collapse
I've used Odin 3.12.3...same stuff FAIL after step cm.bin
*Detection* said:
Try the newer version of ODIN
Code:
https://mega.nz/#!jUgRiTSa!fnAVwr7yFi4dlPk4V0oQ5DuoFe3iiG0jH-ws91IHOPc
Leave ODIN as it is, don't change any settings, just add the 4 sections of firmware and hit Start
Click to expand...
Click to collapse
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
zorglub! said:
Do you mean AP,BL, CP and Home_CSC ?
It is what I did ( with Odin 3.11 and 3.12.3) but same message FAIL after cm.bin step
Click to expand...
Click to collapse
and same tuff with Odin 3.12.7
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
djh816 said:
Edit: Derp, wrong forum VZW won't help you The instructions in mine only say to use ap, cp, and csc but archive does include all. Wondering if you are just flashing more than needed?
Click to expand...
Click to collapse
VZW ???
zorglub! said:
VZW ???
Click to expand...
Click to collapse
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
thks Mate, I'll do it tomorrow...( fairly late here...) and let u know
Thks anyway
djh816 said:
Hahah yessir... Sorry, I have both S7 forums favorited. Context wise I thought I was replying to a Verizon thread.. My mistake
Click to expand...
Click to collapse
No problem...
But I had absolutely no idea what u were talking about....clear now !!!
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Not had a chance to work on subject Sunday...
WIll give a try, following yr suggestions, probably tomorrow...and we'll see
thks again
jaypeeb0917 said:
I also experienced this yesterday. Let me share to you what I did. It might help.
1. Download the stock firmware.
2. Go to download mode.
3. Flash in odin the AP from the stock firmware and csc (not home). For BL and CP, I downloaded the latest files from this link: https://androidfilehost.com/?w=files&flid=95565 (i got it from here: https://forum.xda-developers.com/galaxy-s7/how-to/guide-onelatest-stock-fw-csc-root-t3702963)
I hope it works.
Click to expand...
Click to collapse
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
zorglub! said:
Thks for having pointed meto the right direction...and make ùe discover my mistake...
I was using the wrong base or trying to estore to the wrong base...
Now it is fixed and i'm back to Stock
Thks again
Click to expand...
Click to collapse
I am glad it worked. I hope my suggestion worked too. XD
Hey guys i am very new to this and have done a lot of research and i'm in need of some help, I tried to put new firmware onto my Samsung S7 but it failed, long story short i can't get it to boot up normally now. I can put it into download mode and then the recovery mode.
In Download mode it says this
Product Name: SM-G930F
Current Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 0
In Recovery Mode it says
samsung/heroltexx/herolte
7.0/NRD90M/G930FXXU1DQJ1
No Support SINGLE - SKU
Supported API: 3
dm-Verity error ...
E: Failed to mount /system (Invalid Argument)
I have done this in the past and haven't had any issues with it, but no matter what i do i cant get it to boot up. I've tried the kies and smart switch to put the normal firmware back on but it says this device isn't supported and so it wont load it on. I have tried multiple firmwares from sammobile using AP,BL,CP and i did put in the CSC one also at some stage.
I hope this is enough information if i have missed anything please let me know, hopefully someone has some answers or suggestions. Thanks guys
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
*Detection* said:
Make sure you are using ODIN 3.12.3 or newer, older versions don't work properly
Click to expand...
Click to collapse
Yeah i was using an older version but i downloaded the latest one and still no luck
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
Have not tried this, will give it a shot and get back to you!
Cholek3 said:
First off, Kies no longer supports Galaxy S7, actually never did.
What you can try, use odin (latest version 3.12.7 I think), download your firmware and include all 5 files in odin. You cannot ignore CSC file.
So in order, put BL, AP, CP and CSC and... pit file.
In order to have pit file, you need to make o copy of CSC file, change extension of that copy file to .zip, extract files and inside you will find pit file. Include it in odin in Pit card.
Then flash your phone and report back.
Click to expand...
Click to collapse
No Luck, i tried what you said and this is what happens
https://imgur.com/a/QQGAn
Re-Partition was automatically ticked, should i try it again and have it un-ticked? or have i totally buggered it?
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Cholek3 said:
Try different cable and/or USB port and/or even computer.
Your phone is ok-ish. You only have to manage to flash software and should be up and running.
Click to expand...
Click to collapse
Well im glad its alright haha, ill keep trying different things as you suggested! Hopefully i have some luck. Thank you
Okay bit of an update on what i have attempted - Still no luck at all,
Tried different Odin verisons
Tried multiple firmwares all downloaded from SamMobile & Correct country/carrier etc
The BL,CP and CSC all seem to work fine when i do them by themselves or seperately but i can never get AP to work, it always fails at Sys.img and doesn't go any further.. it always fails about 1/4 of the way through
Tried the PIT partition with and without re-partition clicked
Tried different cables and Ports
anyone have anymore suggestions or is it dead
Did you try using Smart Switch on pc and recover software that way?
Cholek3 said:
Did you try using Smart Switch on pc and recover software that way?
Click to expand...
Click to collapse
Yeah, it says device isn't supported.. when i click on emergency software recovery nothing shows up..
I have run out of options. Sorry.
Cholek3 said:
I have run out of options. Sorry.
Click to expand...
Click to collapse
No worries, ill keep trying and report back if i have any success
will91491 said:
Yeah i was using an older version but i downloaded the latest one and still no luck
Click to expand...
Click to collapse
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
It could be the internal memory fault. That's why it stops at 1/4 each time.
*Detection* said:
Phone must be in Download Mode for ODIN
Make sure you have downloaded the correct firmware
Click to expand...
Click to collapse
Yeah i know this much, have done it also
Cholek3 said:
It could be the internal memory fault. That's why it stops at 1/4 each time.
Click to expand...
Click to collapse
Might give it a shot at replacing it, its ****ed either way as far as i can see. I've worked on a lot of iPhone diodes/chips so hopefully i can do this one. Will report back in a few weeks
Tried a different PC?
*Detection* said:
Tried a different PC?
Click to expand...
Click to collapse
Thats what I suggested earlier on, but there seems to be loads of other threads recently, where people's phones fails at loading "system" in odin.
Anyone help me please...i have a samsung galaxy s8 plus and my country is malaysia...i want to update my firmware manually from 7.0 to 8.0 ...i wish that i can install by OTA but everyday i check it say my software already the latest one, yet it still running a 7.0 which is i desperately want an update. Then i search in sammobile for the latest firmware available for my device..there it have a 8.0 and 9.0 firmware that i can download....i download a 8.0 and flash it using odin 3.12 ...the problem here ,after i start to fill out that "BL AP CP CSC " butto n then i press start it show me a "PASS" with green background.. its weird cos all that process completed in 7 sec..Then my device reboot...nothing unusual happen...i check in software detail on my phone it say that im running 7.0..with nothing change at all ...help me please....and btw im not using a "CSC" im using a "HOME_CSC" file is that make any difference??and should i on or off developer option in setting???
Never heard something like that. I think you forgot to check ap + bl + cp + csc. Home csc is not wiping data. Normal csc does
kpwnApps said:
Never heard something like that. I think you forgot to check ap + bl + cp + csc. Home csc is not wiping data. Normal csc does
Click to expand...
Click to collapse
I dont think so...i check all u say...and i flash it 2 times already but still nothing was change....ya i using home csc cause i dont want to wipe up my data....any other suggestion?
izulshah96 said:
I dont think so...i check all u say...and i flash it 2 times already but still nothing was change....ya i using home csc cause i dont want to wipe up my data....any other suggestion?
Click to expand...
Click to collapse
Does it give any red message on download mode?
kpwnApps said:
Does it give any red message on download mode?
Click to expand...
Click to collapse
Nop...nothing weird....all normal that it should be ...nothing red....at odin also nothing weird...all green and pass...
izulshah96 said:
Nop...nothing weird....all normal that it should be ...nothing red....at odin also nothing weird...all green and pass...
Click to expand...
Click to collapse
Please download firmware from https://updato.com the files might be modified or content in it has been removed
kpwnApps said:
Please download firmware from https://updato.com the files might be modified or content in it has been removed
Click to expand...
Click to collapse
But from the link u give its 2018 meanwhile in sammobile the latest one is 2019....is it okay??
izulshah96 said:
But from the link u give its 2018 meanwhile in sammobile the latest one is 2019....is it okay??
Click to expand...
Click to collapse
Sec ss
izulshah96 said:
But from the link u give its 2018 meanwhile in sammobile the latest one is 2019....is it okay??
Click to expand...
Click to collapse
Installthis firmware then you can always update to 9.0
kpwnApps said:
Installthis firmware then you can always update to 9.0
Click to expand...
Click to collapse
Ok sir thnks for ur help...will update here if this work...:good:
kpwnApps said:
Installthis firmware then you can always update to 9.0
Click to expand...
Click to collapse
And yup...nothing also change at all...7 sec only
izulshah96 said:
And yup...nothing also change at all...7 sec only
Click to expand...
Click to collapse
Sec ss
izulshah96 said:
Sec ss
Click to expand...
Click to collapse
Hi can you try flashing each file alone, i mean as example flash only BL then AP then CP then CSC then i could see where it stops at
kpwnApps said:
Hi can you try flashing each file alone, i mean as example flash only BL then AP then CP then CSC then i could see where it stops at
Click to expand...
Click to collapse
Yeyyy...i just done my update...hahaha...actually i have to use the latest odin which is odin 3.13 before this i use odin 3.12 that why it doesnt make it...but now my software have been update to 8.0...thank you so much brother
kpwnApps said:
Please download firmware from https://updato.com the files might be modified or content in it has been removed
Click to expand...
Click to collapse
Please, how can i go Over the 15ko/s while downloading firmware in updato !?? Don't want to wait 5 days of downloading...
In fact, i just want to download firmware for SM-G955FD Android pie (OTA, smart switch, does not work !
Any link to help ?
Hi guys,
I am having trouble recovering my galaxy s4. I have downloaded odin and stock firmware and followed the tutorial to reflash firmware but it always fails with the same message Deviceinfo fail. I have attached a ic of the screen. The phone originally had German firmware on it at level 5.0.1 lollipop. I can get the phone into the right state to flash and have tried several different BG firmwares
GT-I9505_1_20161201163515_lgwvgkwp4u
I9505XXUGNG8_I9505YXYGNH2_BTU
I always end up with the same error. It would be great if some guru could give me a hint on what I am doing wrong. BTW I am running windows 10 the Galaxy drivers I am using are 1.7.43.0 and Odin3 is V3.14.4.
Cheers Guys
Steve
Here is your solution:
Boot into download mode by pressing ( Volume Down + Power + Home button) and stop at the screen of continue and reboot.
Quickly boot back into download mode by pressing (Volume Down + Power + Home button)
Press continue.
XDHx86 said:
Here is your solution:
Boot into download mode by pressing ( Volume Down + Power + Home button) and stop at the screen of continue and reboot.
Quickly boot back into download mode by pressing (Volume Down + Power + Home button)
Press continue.
Click to expand...
Click to collapse
Thanks for response but that doesnt fix it . It just puts the phone into the firmware updae state
That's download mode....
If you're new to this stuff, please don't. Don't waste time and a good working phone for whatever youtube tutorial you saw.
XDHx86 said:
That's download mode....
If you're new to this stuff, please don't. Don't waste time and a good working phone for whatever youtube tutorial you saw.
Click to expand...
Click to collapse
I have flashed images before with no problem. This had German firmware on it and was trying to get a UK image on it. I followed the process posted here on this forum not a youtube tut. I would have thought tutorials on this forum should be good???
steve67474 said:
I have flashed images before with no problem. This had German firmware on it and was trying to get a UK image on it. I followed the process posted here on this forum not a youtube tut. I would have thought tutorials on this forum should be good???
Click to expand...
Click to collapse
Tutorials here are revised and trustworthy, what's not trustworthy is the user who's is flashing the phone. As I specifically said "If you're new to this" which means if anything goes awry, it's your fault and no one is responsible. Of course someone here would help you if that happens and you ask nicely.
Flashing UK variant might cause issues with the SIM services on the device, like issues with calls, messages, etc.
Flashing a different ROM doesn't necessarily mean you have a better device.
XDHx86 said:
Tutorials here are revised and trustworthy, what's not trustworthy is the user who's is flashing the phone. As I specifically said "If you're new to this" which means if anything goes awry, it's your fault and no one is responsible. Of course someone here would help you if that happens and you ask nicely.
Flashing UK variant might cause issues with the SIM services on the device, like issues with calls, messages, etc.
Flashing a different ROM doesn't necessarily mean you have a better device.
Click to expand...
Click to collapse
Thanks for the info and accept what you say. it maybe I have tried to flash the wrong image on the phone and got myself in this position as I didnt want the german image with its apps. We all have to learn somewhere and have had no issues other times but I am trying to recover from this now and XDA is where I am looking for support.
Cheers
steve67474 said:
Thanks for the info and accept what you say. it maybe I have tried to flash the wrong image on the phone and got myself in this position as I didnt want the german image with its apps. We all have to learn somewhere and have had no issues other times but I am trying to recover from this now and XDA is where I am looking for support.
Cheers
Click to expand...
Click to collapse
XDHx86 said:
Here is your solution:
Boot into download mode by pressing ( Volume Down + Power + Home button) and stop at the screen of continue and reboot.
Quickly boot back into download mode by pressing (Volume Down + Power + Home button)
Press continue.
Click to expand...
Click to collapse
I already gave you the solution, this should put your device in download mode and solve the problem with odin.
After following these steps, just flash ROM files.
XDHx86 said:
I already gave you the solution, this should put your device in download mode and solve the problem with odin.
After following these steps, just flash ROM files.
Click to expand...
Click to collapse
Odin fails to load the image it checks the cjhecksum ok but when you press start then it fails to load. See my first post I posted an image of the failure
Regards
Steve
steve67474 said:
Odin fails to load the image it checks the cjhecksum ok but when you press start then it fails to load. See my first post I posted an image of the failure
Regards
Steve
Click to expand...
Click to collapse
I think you may have to format the partitions and flash the ROM. Doing so will delete everything on your device.
XDHx86 said:
I think you may have to format the partitions and flash the ROM. Doing so will delete everything on your device.
Click to expand...
Click to collapse
Thanks will give that a go
Cheers
Steve
steve67474 said:
Thanks will give that a go
Cheers
Steve
Click to expand...
Click to collapse
Just in case you don't know how to:
Extract PIT file from CSC file.
Open Odin and put the PIT file in the PIT tab.
Check re-partition option in options tab.
Put BL, AP, CP and CSC files and flash.
To extract the PIT file from the CSC file:
Rename the CSC file extension from MD5 to ZIP then extract it in a folder.
Rename the CSC file extension back from ZIP to MD5.
Only put files from the UK variant or whatever ROM your going to flash.
XDHx86 said:
Just in case you don't know how to:
Extract PIT file from CSC file.
Open Odin and put the PIT file in the PIT tab.
Check re-partition option in options tab.
Put BL, AP, CP and CSC files and flash.
To extract the PIT file from the CSC file:
Rename the CSC file extension from MD5 to ZIP then extract it in a folder.
Rename the CSC file extension back from ZIP to MD5.
Click to expand...
Click to collapse
Cheers XDHx86 will give this a go
Hi XDHx86 I think I know what's going wrong here. All the images I have downloaded have 1 x.MD5. and 1 x.dll in them.
EG: I9505XXUHOJ2_I9505BTUHOJ1_I9505XXUHOJ2_HOME.tar.md5 and SS_DL.dll. Although some of the downloads say there should be 4 files. BL AP CP & CSC. I dont see any of these? In odin I have been clicking on AP and pointing to the md5 fil which fails. I think I need to get an image that has those 4 files.
Thanks again for your help on this
Steve
steve67474 said:
Hi XDHx86 I think I know what's going wrong here. All the images I have downloaded have 1 x.MD5. and 1 x.dll in them.
EG: I9505XXUHOJ2_I9505BTUHOJ1_I9505XXUHOJ2_HOME.tar.md5 and SS_DL.dll. Although some of the downloads say there should be 4 files. BL AP CP & CSC. I dont see any of these? In odin I have been clicking on AP and pointing to the md5 fil which fails. I think I need to get an image that has those 4 files.
Thanks again for your help on this
Steve
Click to expand...
Click to collapse
You can get your firmware from here. Whether it's stock or other variants that you want.
XDHx86 said:
You can get your firmware from here. Whether it's stock or other variants that you want.
Click to expand...
Click to collapse
Thanks for all your help. I resolved it in the end it was my cable. It was not a genuine charger cable. got my mitts on a proper one and it flashed no probs. Again thankd for advice.
Steve
steve67474 said:
Thanks for all your help. I resolved it in the end it was my cable. It was not a genuine charger cable. got my mitts on a proper one and it flashed no probs. Again thankd for advice.
Steve
Click to expand...
Click to collapse
Haha, that's really unexpected situation. I don't think anyone would have predicted that.
Anyway glad it worked out in the end.