Database Info

[Files] OnePlus Two System Files, Drivers, ROMs, ToolBox

Dear XDA User
This is XQ55 Files fo help you with OnePlus2
OnePlus2 Drivers
OnePlus2 Roms
OnePlus2 Recovery
OnePlus2 ToolBox
OnePlus2 System Files
OnePlus2 Wallpapers
OnePlus2 Teardown Images
For more Files
If this Files help you you can say Thank you

Thanks for sharing

Does this work properly? the TWRP is not officially there on TWRP page what does this use?
---------- Post added at 05:28 PM ---------- Previous post was at 05:18 PM ----------
how to relock the bootloader if we want?

matrix.bharath said:
Does this work properly? the TWRP is not officially there on TWRP page what does this use?
---------- Post added at 05:28 PM ---------- Previous post was at 05:18 PM ----------
how to relock the bootloader if we want?
Click to expand...
Click to collapse
This One from OnePlus2 Forum and it's worked with me

XQ55 said:
This One from OnePlus2 Forum and it's worked with me
Click to expand...
Click to collapse
how to re lock the boot loader? there is npot option in tool kit.

Anyone please post the instructions how to install these files in any way.

Can we install the system apps like the launcher on OPO?

Please confirm is there a way to relook the bootloader and get back to stock. And once we root will get ota on oxygen or not?

It works fine! Great work! Thanks!

matrix.bharath said:
Please confirm is there a way to relook the bootloader and get back to stock. And once we root will get ota on oxygen or not?
Click to expand...
Click to collapse
yes from toolbox

XQ55 said:
yes from toolbox
Click to expand...
Click to collapse
There is no option in tool box to relook bootloader can you please check.

matrix.bharath said:
There is no option in tool box to relook bootloader can you please check.
Click to expand...
Click to collapse
Bring device in fastboot mode, then enter
fastboot oem lock
on your PC.
This will lock your bootloader again. Afterwards, do a full wipe of the system and you should be pretty much back to start again.
Andi

May i know how to flash the 1.1gb update from oneplus for oneplus 2 manually?i m using stock recovery on oxygenOS

Lord Boeffla said:
Bring device in fastboot mode, then enter
fastboot oem lock
on your PC.
This will lock your bootloader again. Afterwards, do a full wipe of the system and you should be pretty much back to start again.
Andi
Click to expand...
Click to collapse
Thanks sir, but there is no such option in the tool box to lock bootloader again.

XQ55 said:
Dear XDA User
This is XQ55 Files fo help you with OnePlus2
OnePlus2 Drivers
OnePlus2 Roms
OnePlus2 Recovery
OnePlus2 ToolBox
OnePlus2 System Files
OnePlus2 Wallpapers
OnePlus2 Teardown Images
For more Files
If this Files help you you can say Thank you
Click to expand...
Click to collapse
Made an usefull video guide. thot it might be usefull you can add in OP
Oneplus 2 - How to Root, Unlock, TWRP
In this video lets unlock the Bootloader, install Custom recovery (TWRP) & flash Super SU to root your oneplus 2 all in simple steps
Download Links
Tool Kit - https://goo.gl/XshfG9
Super SU - https://goo.gl/o73tkf
XDA Link -
1. http://goo.gl/0B8WMb
2. http://goo.gl/oqFFuZ
Oneplus Forum Link - https://goo.gl/6NAmk3

file have been removed...please upload again..

Which one of the supplied files is the stock recovery?

fusion_master said:
Which one of the supplied files is the stock recovery?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347818542 for OxygenOS 2.0.2.

Waterdroid said:
https://www.androidfilehost.com/?fid=24052804347818542 for OxygenOS 2.0.2.
Click to expand...
Click to collapse
Can I just flash the boot.img through ADB sideload? The reason I ask is that I have TWRP on an encrypted phone (before checking that encryption wasn't supported oops!); so currently only able to ADB sideload as sdcard is not mountable to flash full zip.

Waterdroid said:
https://www.androidfilehost.com/?fid=24052804347818542 for OxygenOS 2.0.2.
Click to expand...
Click to collapse
can this .zip be flashed with flashify or do we need to extract the boot.img and just fastboot flash that...?
also in the recoveries download link we have the files in the pic below...3 actual recovery.img's and 2 boot.img's
will these boot.img's replace my current TWRP.img i have in the device ATM and there also seem to be two to choose from...can i use either one..confused.com...?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]

[RECOVERY][PBRP - 3.3.0-0][Xiaomi Redmi Note 7 PRO]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:​
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
INFORMATION:​
Pitch Black Recovery was started in March 18 2018 with the movement to enhance TWRP with better customizatons, themes and features. You can read more about PBRP here.​
NOTE : ​
This build of PBRP is based on the kernel source code and no prebuilt kernel was used for building. Because, it is the first build, testers are very welcome for providing feedback regarding the build. ​
DOWNLOAD :​
PBRP-3.3.0.0​
BUGS:​
You tell me.
INSTRUCTIONS :​
Download the recovery image and place it in some folder on your desktop and open the Terminal/Command Prompt/Powershell in the said folder.
Connect your device to the PC and boot into the fastboot mode using H/W keys or by typing :
Code:
adb reboot bootloader
Now, type :
Code:
fastboot flash recovery recovery.img
OR,
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
Download the recovery image from the link.
Reboot to PBRP.
Hit Install and tap the "Images..." button in the lower right
Browse to the location of the PBRP image on your device and select it.
Select recovery from the partition list and swipe to flash.
For folks who are running MIUI (memeui) :​
Thanks to Snehashis Sarkar for a short tutorial.
Your data will get wiped before flashing the recovery so take a backup of the internal storage.
Reboot to fastboot.
Wipe the Userdata via fastboot.
Flash this recovery.
Boot into the recovery and format the data (just format it, don't go for the "advanced wipe" section .
Flash this image file: Patched fstab + vbmeta + thermal configs for better performance
Reboot and enjoy.
Kernel Source : ​
Link: android_kernel_xiaomi_sm6150
XDA:DevDB Information
[RECOVERY][PBRP - 3.3.0-0][Xiaomi Redmi Note 7 PRO], Tool/Utility for the Xiaomi Redmi Note 7 Pro
Contributors
Doomsday101
Source Code: https://github.com/PitchBlackRecoveryProject/manifest_pb
Version Information
Status: Testing
Current Beta Version: 3.3.0-0
Beta Release Date: 2019-05-09
Created 2019-05-08
Last Updated 2019-05-09

Encryption fixed?

This just hangs at the loading image for me, same as your TWRP 3.3.0
I have the Chinese RN7P if it makes any difference.

Dwughjsd said:
Encryption fixed?
Click to expand...
Click to collapse
Please confirm

Bolts Edge said:
Please confirm
Click to expand...
Click to collapse
Been busy in real life recently and bricked my violet before so I would rather wait for others to try

New steps for flashing (just for the MIUI users)
I have updated the forum with extra steps for those who are running the MIUI and try to flash the custom recovery for the first time. This will allow you to run the custom recovery alongside the MIUI so you may give this a go.

Bro please help me, when I was flash recovery img Succesfly flashed but after I am going to recovery mode pbpr screen only showing pls help me

philomin said:
Bro please help me, when I was flash recovery img Succesfly flashed but after I am going to recovery mode pbpr screen only showing pls help me
Click to expand...
Click to collapse
I suppose you must be running miui. I have posted some additional instructions on the forum on how to flash for miui users. You can also make use of this tutorial for reference :

Your Recovery Is Working Fine but why twrp and Pitch black twrp backup restore folder are changed..i should be same but not a problem good job..:good::good:
---------- Post added at 03:31 PM ---------- Previous post was at 03:28 PM ----------
One Question Its a Fully Stable To Work With miui global rom without any encryption.. and with miui incremental updates..

Aj51 said:
Your Recovery Is Working Fine but why twrp and Pitch black twrp backup restore folder are changed..i should be same but not a problem good job..:good::good:
---------- Post added at 03:31 PM ---------- Previous post was at 03:28 PM ----------
One Question Its a Fully Stable To Work With miui global rom without any encryption.. and with miui incremental updates..
Click to expand...
Click to collapse
I haven't tested it myself but I would appreciate it if you or someone else would like to test it out ))

Hello , the recovery works flawlessly , thanks for your work , loving the themes

diamantik said:
Hello , the recovery works flawlessly , thanks for your work , loving the themes
Click to expand...
Click to collapse
doesn't stick on my device. have to flash recovery again and again

I installed it over fresh flash of latest MIUI Global Stable 10.3 fastboot, boots properly and everything is working so far. Will add more details once I test more.
Edit : I installed the MIUI eu rom over this recovery, works good, no hiccups so far. People facing the 'Stuck at Boot Logo' try erasing userdata in fastboot and then flash.
P.S. : I didn't flash the patched vbmeta mentioned by OP but still it's functioning well no problems.
---------- Post added at 06:33 PM ---------- Previous post was at 05:56 PM ----------
antarix said:
doesn't stick on my device. have to flash recovery again and again
Click to expand...
Click to collapse
Working for me, try wiping userdata via fastboot and if possible try flashing over a clean, fastboot flashed MIUI.

Doomsday101 said:
I have updated the forum with extra steps for those who are running the MIUI and try to flash the custom recovery for the first time. This will allow you to run the custom recovery alongside the MIUI so you may give this a go.
Click to expand...
Click to collapse
Others file are not downloading help with download link using latest stable build on my phone

CHETAN9 said:
Others file are not downloading help with download link using latest stable build on my phone
Click to expand...
Click to collapse
Which file do you exactly want?

Naveenthemi said:
Which file do you exactly want?
Click to expand...
Click to collapse
Well all the files other than recovery patched files vbmata for fast performance

CHETAN9 said:
Well all the files other than recovery patched files vbmata for fast performance
Click to expand...
Click to collapse
Recovery u mean?

Naveenthemi said:
Recovery u mean?
Click to expand...
Click to collapse
Recovery downloaded but rest of the files patched fstab+vbmeta+thermal configs for best performance
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
Naveenthemi said:
Recovery u mean?
Click to expand...
Click to collapse
One more thing no need to flash any kind of luckypatcher as I used to do with my redmi note 5 pro earlier

CHETAN9 said:
Recovery downloaded but rest of the files patched fstab+vbmeta+thermal configs for best performance
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
One more thing no need to flash any kind of luckypatcher as I used to do with my redmi note 5 pro earlier
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-2MoGdQMR_jrDpPdIcK8rY0YfZOnwgaR/view?usp=drivesdk
Lucky patcher? What for...

Naveenthemi said:
https://drive.google.com/file/d/1-2MoGdQMR_jrDpPdIcK8rY0YfZOnwgaR/view?usp=drivesdk
Lucky patcher? What for...
Click to expand...
Click to collapse
Thanks for the link actually it is totally different from note 5 pro I used the device earlier

[ROM][OFFICIAL/WEEKLY] Omnirom for Oneplus7pro [9.0][OOS Vendor/OOS camera]

CLOSED PER OP REQUEST
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
DOWNLOAD Official
DOWNLOAD oos camera
Kernel source:
Source
Selinux Status:
Enforcing
MAJOR BUGS:
VoWifi
flash on your own risk.
FLASHING
First Time:
update fastboot and adb ( https://developer.android.com/studio...platform-tools )
download twrp
fastboot boot twrp-blabla.img
flash stock OOS (we use stock vendor, if you have that skip this step)-(but make sure your both slots are fine (look flashing oos update below))
flash omni
reboot to bootloader
fastboot boot twrp-blabla.img again
flash open gapps nano (ONLY GAPPS NANO ARE SUPPORTED by US, But flash what you want)
reboot (if you still have trouble with understanding a/b just repeat whole procedure once again).
If phone doesnt boot format userdata.
Updating: (WILL WORK ONCE OFFICIAL)
Use OTA inside rom for updates
updating when stock OOS update is released:
boot twrp
flash oos
flash omni
reboot bootloader
boot twrp
flash oos
flash omni
reboot bootloader
boot twrp
flash gapps
if u did something else. we dont need/wanna know about it in the thread
May the force be with you
OOS camera work with portrait mode, 60fps, all 3 cams, etc.
Android auto works fine.
If you dont mess with magisk, rom will always pass safety net out of the box.
Device Maintainers
@vache, @darkobas,
@maxwen
XDA:DevDB Information
OmniRom, ROM for the OnePlus 7 Pro
Contributors
darkobas, vache, maxwen
Source Code: [url]https://github.com/omnirom/[/URL]
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: 9.5.11
Version Information
Status: Stable
Created 2019-07-19
Last Updated 2019-07-28

reserved

nice!
any plans to support 5g variant?

Nekromantik said:
nice!
any plans to support 5g variant?
Click to expand...
Click to collapse
probably not before q..... even then we would need a experienced tester if we wanted to make things work as no1 in team has a 5g. dunno even what the current issues with it are

group
Is there a telegram group?

Yes! Thank you! Hopefully will have time to flash today.

darkobas said:
probably not before q..... even then we would need a experienced tester if we wanted to make things work as no1 in team has a 5g. dunno even what the current issues with it are
Click to expand...
Click to collapse
The hardware is identical apart from Modem so things like vendor and modem files will be different.
I flashed AOSiP with 5g supported kernel and it boots and camera bluetooth etc works. Just no SIM detected.

Before people ask yes when it boots up it is on 60 fps mode. To change go to settings --> omni gears---> display modes and put it on 3120x1440 90.0000. The 1080p mode seems to break fingerprint and gives you a weird screen off animation.
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
joemossjr said:
Before people ask yes when it boots up it is on 60 fps mode. To change go to settings --> omni gears---> display modes and put it on 3120x1440 90.0000. The 1080p mode seems to break fingerprint and gives you a weird screen off animation.
Click to expand...
Click to collapse
Edit. Also fingerprint seemed to be pretty hard to setup. Had to press pretty hard to get it to recognise. Works fine now.

Rom working well so far! 90hz initially wasn't working but switching to 60hz then back to 90hz fixed it for me. I can't seem to get UnifiedNlp working with MicroG though. I already removed com.qualcomm.location as the NanoDroid wiki says it could conflict, but to no avail. Could it maybe be that the rom doesn't look for com.google.android.gms as a location provider?

gigatex said:
Rom working well so far! 90hz initially wasn't working but switching to 60hz then back to 90hz fixed it for me. I can't seem to get UnifiedNlp working with MicroG though. I already removed com.qualcomm.location as the NanoDroid wiki says it could conflict, but to no avail. Could it maybe be that the rom doesn't look for com.google.android.gms as a location provider?
Click to expand...
Click to collapse
Just dont remove qcom location and location will work fine

Love the ability for custom fingerprint Icons

joemossjr said:
Love the ability for custom fingerprint Icons
Click to expand...
Click to collapse
If anyone's wants some hit me up and I'll see what I can do

joemossjr said:
If anyone's wants some hit me up and I'll see what I can do
Click to expand...
Click to collapse
Could you create a zip of them all and make a theme post for it? Or drop it here since i think this is the only rom right now with custom icon ability.

So if coming from another ROM do we format data boot back to TWRP wipe but don't wipe internal, system are vender then flash ROM bla bla bla done ?

Hunter3U said:
Could you create a zip of them all and make a theme post for it? Or drop it here since i think this is the only rom right now with custom icon ability.
Click to expand...
Click to collapse
You can find some files here : https://t.me/s/OP_fps

Here's a zip of ones I made

I m on 9.5.10 with magisk and unlocked bootloader..what should be flashing method?should I go with method said in op( oos-omni-reboot to b/l-twrp-oos-omni method)or any other method?

punit1708 said:
I m on 9.5.10 with magisk and unlocked bootloader..what should be flashing method?should I go with method said in op( oos-omni-reboot to b/l-twrp-oos-omni method)or any other method?
Click to expand...
Click to collapse
I used the same method as op6 and op7pro in previous roms works perfectly and I formatted data prior and same wipe method as previous roms

joemossjr said:
Here's a zip of ones I made
Click to expand...
Click to collapse
How to use the zip. I am on OOS renovate rom
Edit.. Found it

Dbj.Dhaval said:
How to use the zip. I am on OOS renovate rom
Click to expand...
Click to collapse
Try using same method as you woruld with other real roms not gsi mess search xda read up one post

Bliss rom (GSI) android 9 pie for Lenovo K9 (L38043)

Hello guys today i will show you how to download Bliss rom with android pie on Lenovo K9 (L30843)
Download TWRP first: https://mega.nz/#!tFcm1IYb!nN6H210DoyYqjL0WEnI-I9skClDPEO0gl82H5My-gq4
if you have not unlocked the bootloader: https://www.howtoapps.info/how-to-unlock-bootloader-lenovo-k9/
Bliss rom link: https://mega.nz/#!FMlyGaxS!jUYIAfcyZkIyN4UDeZ_-CDcEyrieGYCWs7q7bIwm7Tc
First step: Go to the TWRP.If you have internal storage (0mb),Go to wipe/advanced wipe/mark data/repair or change file system/change flie system/EXT4 and you're done
I recommend you save your rom to sd card not have thousands of quarrels
Second step: Go to micro sd card/install image/your recorded bliss rom/mark system image/slipe to confirm flash
Third step: gapps link: https://mega.nz/#!9dFkWY5I!JKX80Udn2ZmTgRuGiwgcdRLQXEBssowK7xUOvL2wW4E
Install zip/mark open_gapps-arm64-9.0....../swipe to confirm flash/reboot system now
the rom leaves without a logo,shows its original logo of Lenovo,And after a while the inscriptions orange state are removed,and rom starts and says that there is an internal problem, do not be afraid, do not create problems,wait until the screen is a little darker and press ok.
Mention below in the comments if there are bugs!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks for the guidance, but it shows dm-verify error after exit twrp. keeping ask me Volume up EIO mode: or Volume down: restart mode

Do not worry.
This happens to me too.
You just push the power up and you're done.

Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!

nakaconsan said:
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
Click to expand...
Click to collapse
restore your system with stock rom drop your phone and it will send you to original android recovery,and you'll fix the problem there.
And then again you download twrp and everything from the article.
The same thing happened to me.

nakaconsan said:
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
Click to expand...
Click to collapse
https://translate.googleusercontent.../file&usg=ALkJrhhPKYKHeAfpo2xmD7CW9PcuAW8K8A#!
link to stock rom on lenovo K9
https://spflashtool.com/download/
download the latest version of sp flash tool

nakaconsan said:
Appreciated your reply. But the press of volume up will go back to twrp. Btw, I guess the problem may be my previous OS is 8.1 not Pie you mentioned. I will try to flash to Pie before your solution. thanks!
Click to expand...
Click to collapse
Open the sp flash tool.
On scatter-loading file you press choose.
Find the folder where it is saved firmware.
You are going to Frimware flolder and you choose MT6765_Android_scatter.
Turn off your phone completely.
Press download in sp flash tool.
Pressing the volume down button connects to the usb phone and the download starts.

call network / other gsi roms
Hi, I would like to ask if the call network is working on this rom and if I can use other GSI Roms such as erfanoabdi roms or Lineage OS etc. and if other files like permissiver_v2.zip or magisk need to be flashed to boot these roms. Thank you for your response.
(Can i must use custom boot.img or stock oreo boot.img ?)

Samuel Ladziansky said:
Hi, I would like to ask if the call network is working on this rom and if I can use other GSI Roms such as erfanoabdi roms or Lineage OS etc. and if other files like permissiver_v2.zip or magisk need to be flashed to boot these roms. Thank you for your response.
Click to expand...
Click to collapse
Yes, you can download other gsi roms. Choose arm64 a-only. If you want to download gsi rom with android 10, you need to flash Start_treble.zip
,,Start_treble.zip" link: https://mega.nz/file/dJcxiADQ#_iSoctWQ36K1JL3t9qGP0I_HwuHd43iC6e-0TbwZOKA

The Best Gamer said:
Yes, you can download other gsi roms. Choose arm64 a-only. If you want to download gsi rom with android 10, you need to flash Start_treble.zip
,,Start_treble.zip" link: https://mega.nz/file/dJcxiADQ#_iSoctWQ36K1JL3t9qGP0I_HwuHd43iC6e-0TbwZOKA
Click to expand...
Click to collapse
Thanks very much :good:

not booting
hello I have problem I flash gsi android 9 aosp and when I reboot on screen show orange state after 5seconds dm-verity error when I hit volume up phone reboots and nothing. idk whats wrong Iam doing
all works perfect

help
I need help I flash stockrom and I lost baseband I need frimware L38043_ROW_OPEN_USER_M6762_O_MTK_4G_S301_18 and i dont know where to download.:crying:
Iam repaired with this http://x1grand.blogspot.com/2017/07/permanent-imei-nvram-fix-for-mtk.html for somebody usesful

My try to dont make ROM for K9
Hello can I use this ROM https://forum.xda-developers.com/redmi-6/development/rom-bootleggersrom-4-3-xiaomi-redmi-6-t4011719 on K9 when I swap kernel in boot.img from stock ROM to this ROM? Because I try GSI ROMs and not boot any off them. :crying:
nothing happend

Android 10 GSI VoLTE fix for Redmi 8 [OLIVE] [Android 10]

VoLTE Fix For Redmi 8 [olive]
Hey there all Olive users!! We all wanted a fix for VoLTE to work on GSIs so here is a guide on how to do that. I've tried and tested this on Havoc OS 3.7 GSI. It should work on other GSIs as well.
First of all download all the files that you'll need before you proceed further.
Files needed:
Xiaomi.eu MIUI 11 rom based on Android 10. Link: LINK
Magisk 20.4 (Latest). LINK
Whatever GSI you want to use.
Olive_Q_Magisk_VoLTE_Fix.zip LINK
GSI-Qualcomm-VoLTE-Fix.zip LINK
Procedure:
1) Format Data using TWRP/OrangeFox Recovery.
2) Flash latest xiaomi.eu rom based on Android Q. (Link above)
3) After flash is complete, wipe system image. And flash your desired GSI image (Must be Android 10) like you usually do and then flash permissiver.zip.
4) Reboot to system. Do setup. Then reboot back to your recovery.
5) Flash Magisk and rebbot to system.
6) Now open Magisk Manager and install the Olive_Q_Magisk_VoLTE_Fix.zip module provided. ( Link above)
7) Reboot.
8) Now go again to Magisk Manager and uninstall the Olive_Q_Magisk_VoLTE_Fix.zip module, and REBOOT TO RECOVERY.
9) In your recovery now flash GSI-Qualcomm-VoLTE-Fix.zip and reboot to system.
10) Now when system will boot you'll see no network Don't Panic!!
11) Now open Magisk Manager again and install Olive_Q_Magisk_VoLTE_Fix.zip module again. (Link above)
12) Reboot to system.
13) Voila!! Now you have working VoLTE in your GSI for Olive!!
Also all your settings should look like the ones provided in the Screenshots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS:
1. Xiaomi.eu for ROM.
2. @topjohnwu for Magisk.
3. Myself for the Olive_Q_Magisk_VoLTE_Fix.zip Magisk Module.
4. @KhushrajRathod for GSI-Qualcomm-VoLTE-Fix.zip.
Enjoy!! :laugh:

In all fixes only same ims.apk. No need to reflash all fixes for three times

Does WiFicall also works?

xuxu1 said:
Does WiFicall also works?
Click to expand...
Click to collapse
Nope.

xuxu1 said:
Does WiFicall also works?
Click to expand...
Click to collapse
No VoWIFI. I tried with Jio and airtel. None works. It's a Google issue ig blame google it'll fix when it adds it back.

skittels15 said:
In all fixes only same ims.apk. No need to reflash all fixes for three times
Click to expand...
Click to collapse
Yeah, second time it's just to make sure. One removes older ims.apk and one inserts new one. It's some architecture issue. And well whatever works for you.

Are you try outgoing call via Jio sim....Im also Indian If Work Then I will flash gsi....
Also tell Eu rom flash is necessary First or not..Or Stock rom also work....I already flash Vbmeta

Deanwinchester01 said:
Are you try outgoing call via Jio sim....Im also Indian If Work Then I will flash gsi....
Also tell Eu rom flash is necessary First or not..Or Stock rom also work....I already flash Vbmeta
Click to expand...
Click to collapse
Yes, outgoing Jio calls work after the fix. And yes the xiaomi.eu rom is important to be flashed first before any gsi as it has the latest stable vendor and firmware.

The module also work for Redmi 7A Havoc OS 3.7 GSI
thank you.

tried, didnt work
i tried the whole thing in steps, was able to get my network back, but not VOLTE. thank you for the efforts put so far.
---------- Post added at 08:47 AM ---------- Previous post was at 07:50 AM ----------
ivy95 said:
i tried the whole thing in steps, was able to get my network back, but not VOLTE. thank you for the efforts put so far.
Click to expand...
Click to collapse
ah. it worked, need not flash the miui 11 package, it worked for jio india (slot 2) and not for airtel (slot 1)
---------- Post added at 08:50 AM ---------- Previous post was at 08:47 AM ----------
ivy95 said:
i tried the whole thing in steps, was able to get my network back, but not VOLTE. thank you for the efforts put so far.
---------- Post added at 08:47 AM ---------- Previous post was at 07:50 AM ----------
ah. it worked, need not flash the miui 11 package, it worked for jio india (slot 2) and not for airtel (slot 1)
Click to expand...
Click to collapse
lol, sorry for spam , but airtel also provile VOLTE after i went to settings and toggled the VOLTE settings off and on, thats it

Help
Does it work with any ROM or only with the European one?

Install and enjoy! Worked on GSI with Q and P vendors. No need repeat to flash many fixes in 1st post. Fixes from thread works only for India

skittels15 said:
Install and enjoy! Worked on GSI with Q and P vendors. No need repeat to flash many fixes in 1st post. Fixes from thread works only for India
Click to expand...
Click to collapse
The question was poorly formulated. Works with any ROM in any country?

sakeyo said:
The question was poorly formulated. Works with any ROM in any country?
Click to expand...
Click to collapse
Well it works for me here in India with Indian carriers. I can't test it for other countries. Nor can I fix it without being their lol.

skittels15 said:
Install and enjoy! Worked on GSI with Q and P vendors. No need repeat to flash many fixes in 1st post. Fixes from thread works only for India
Click to expand...
Click to collapse
If you are from India, use this file for volte work for me