Mecool KI pro Android TV box bricked. Help me - General Questions and Answers

I've managed to brick my device by mistakenly flashing for KI Pro. Now whenever I connect to power blue light turns on but there is no display. I have tried Amlogic USB Burning Tool and SD card burner method but both don't work in this case. I have tried Pin Shorting Method (pin 6 and pin 7) of emmc But even then it is not detected by PC.
Is there any solution? or can somebody point me to the right forums where I can get help
Any help in this regard would be much appreciated:good: is

Related

SuperPAD not recognized by Windows 7

Hi.
I have a SuperPAD with the latest ROM....I am trying to connect the PAD to my Windows 7 machine....but it does not recognize it...it just stays silent...NOTHING...ABSOLUTELY NOTHING....
As is didnt get any USB cable with my PAD..I bought one off the shop and have connected it.....
Wondering if the Cable was working....(going thru' forums..) I switched On the PAD Holding the Menu Key and Switching it on.....It did once show......on the Computer..... Installing drivers.......But Nothing after that.....
I also tried it with SD Cards and Without SD cards
Need some HELP here folks.....it will be appreciated...
Thanxxx
indtram said:
Hi.
I have a SuperPAD with the latest ROM....I am trying to connect the PAD to my Windows 7 machine....but it does not recognize it...it just stays silent...NOTHING...ABSOLUTELY NOTHING....
As is didnt get any USB cable with my PAD..I bought one off the shop and have connected it.....
Wondering if the Cable was working....(going thru' forums..) I switched On the PAD Holding the Menu Key and Switching it on.....It did once show......on the Computer..... Installing drivers.......But Nothing after that.....
I also tried it with SD Cards and Without SD cards
Need some HELP here folks.....it will be appreciated...
Thanxxx
Click to expand...
Click to collapse
Can't find any windows 7 or 7 64-bit drivers is the problem... I had to install xp on a seperate partition in order to get it to recognize the superpad... I'll let you know if I find anything...
its already tried to install once and failed. Thats why u get nomore popups
go into your device manager and find the unknown device
update drivers
point it to ur burntool folder
works for me
i know this is an old thread but did not want to open a new one for the same purpose. Just got a SuperPad as a gift. Could root it with Gingerbreak. Now the only problem i have is that when i connect it to the pc via the supplied usb cable nothing happens, no pop up nothing, and the superpad does not even show up as unknown device, so i do not know how to make it use the drivers i downloaded.

Bricked Alcatel One Touch 991D Blue LED

Hello
I've got Alcatel One Touch 991D, but unfortunatelly phone is arleady bricked, and i have no idea how to repair it, i tried to use Smartphone Flash Tool but didnk work, the phone is just not detected. When i connect phone via USB device manager shows Wirless Adapter "Alcatel Single RNDIS interface" and blue led shines. Friend told me that phone was disconnected during firmware update and it was a cause of bricked phone. Thanks for any advices.
alcatel 991d bricked
wojtekson16 said:
Hello
I've got Alcatel One Touch 991D, but unfortunatelly phone is arleady bricked, and i have no idea how to repair it, i tried to use Smartphone Flash Tool but didnk work, the phone is just not detected. When i connect phone via USB device manager shows Wirless Adapter "Alcatel Single RNDIS interface" and blue led shines. Friend told me that phone was disconnected during firmware update and it was a cause of bricked phone. Thanks for any advices.
Click to expand...
Click to collapse
anyone with this solution???
step by step??
brings error 3040 while trying to upgrade...all the time..
tried to flash recovery image still nothing...
maybe someone should post the full firmware *.bin

T-R42 USB not working!

hello,
I have T-R42 B351 v2.0, it was bricked and i manged to unbriked it buy connecting pin 8&9.
i manged to restore stock firmware from geekbuying blog . after i connect it to the tv i can see the menu screen of the android, no matter what i connect throw the usb there is no response, i tried wireless mouse&keyboard and disk on key... nothing. i don't have it's remote but with other remote some things is responding so i'm know that the system is not stuck.
i tired many firmware since than and every time it's the same. no connectivity throw the usb.
another thing, when i go to recovery screen it is the same, usb not working
what can i do, is it matter of drivers? is it the metod of the unbrick that cause that?

[Completed] Pipo X9S unbrick

Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Eleonora67 said:
Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find any information for your device on xda, try asking here
https://forum.xda-developers.com/android-stick--console-computers/help
hopefully the experts there can help
Good Luck
Sawdoctor
ok i'll try
thanks

How to unbrick my Meizu X8?

I downloaded the program to my Meise through Magisk, and after rebbot a black screen appeared with the inscription "Your firmware is corrupt". The phone does not exit this mode, the data wipe does not help in the recovery mode. The problem is that I can’t connect my smartphone to a PC in any way, I tried everything, even in the EDL mode the PC does not see it. USB cable and the bottom plate are exactly serviceable. I tried to look for testpoints by poking a needle according to the scheme, but anyway the PC does not see the phone anyways. Does this mean I have a faulty processor? Please help me fix this. Before bracking my phone, at one point the PC stopped seeing the Meizu X8 via USB, and now everything is the same, only I just can’t export a "update.zip" for example or use qualcom9008 driver. Hellp

Categories

Resources