hello,
I have T-R42 B351 v2.0, it was bricked and i manged to unbriked it buy connecting pin 8&9.
i manged to restore stock firmware from geekbuying blog . after i connect it to the tv i can see the menu screen of the android, no matter what i connect throw the usb there is no response, i tried wireless mouse&keyboard and disk on key... nothing. i don't have it's remote but with other remote some things is responding so i'm know that the system is not stuck.
i tired many firmware since than and every time it's the same. no connectivity throw the usb.
another thing, when i go to recovery screen it is the same, usb not working
what can i do, is it matter of drivers? is it the metod of the unbrick that cause that?
Related
Hi Guys,
I've had a few problems with my N5 recently...
If I plug my N5 into my PC via the stock USB cable and boot into the Bootloader (PWR+VOLDN) then it will allow me to flash the original N5 firmware, located here: https://developers.google.com/android/nexus/images, this would indicate to me that there is no issue with the actual devices ability to transfer files via USB connection... Right?
No!
For some strange reason my phone will allow me to push a full factory image to it and will also process any Fastboot commands that are sent to it but as soon as you boot into something like TWRP and try to control the phone's ADB functionality it will not find the device at all! The new MTP option in TWRP 2.8 will allow my computer to see my phone's MTP connection for about 1 second and then will immediately disconnect, the same happens when trying to connect to MTP from within Android too.
USB debugging doesn't show that it is connected when my phone is plugged into my PC and Windows makes the 'device connected' sound and then straight after makes the 'device disconnected' sound...
Any ideas? I am certain that this is an issue with my handset's hardware or software rather than any of the computers or cables... I have tried 3 different cables (including the stock cable) and also three different computers (Windows 8.1 @ Work, Mac OS X @ Work and my own personal PC running Windows 8.1 & Ubuntu @ Home)... All OSs and all computers run into exactly the same issue, device connects briefly and then disconnects.
I have troubleshooted issues relating to the driver. This is not the issue... Device Manager cannot even see the hardware after the disconnect.
Thanks for any help in advance,
Lewis
Also:
-Android does not detect that the USB is charging the device unless the device is booted with the cable attached (if it's not attached before the 'Google' screen then it can't see the USB input at all, within android or TWRP, of course...).
Having the exact same problem. Did you find a solution?
EvilBetty said:
Having the exact same problem. Did you find a solution?
Click to expand...
Click to collapse
It's most likely a driver issue.
Elluel said:
It's most likely a driver issue.
Click to expand...
Click to collapse
Not a driver issue.
3 different Nexus 5s, 5 different workstations. Other two Nexi are fine on all 5 PC's.
1 PC used for ADB forensics, 2 used for ADB development work, one known working for ROM'ing / rooting.
Phone has been factory reset, factory ROM'd from Fastboot. Connects fine on Fastboot. Will not connect on ADB / MTP.
On a fresh PC / phone reboot, the PC will detect the phone for just a second and then it will not reconnect until process is completed.
-EB
What's your adb version?
Went on for about 2 weeks, then suddenly went away on its own. I have no idea what the problem was or the solution. Sorry.
i have a nexus 5 which has stock ROM and blu spark kernel . i locked the bootloader while on the same kernel and again unlocked it . . the phone is bootlooping into twrp and the google logo . in twrp it says unable to mount data . i can access twrp . . i am unable to flash anything . it says unable to mount data/ . please the attachment
Dear,
My Galaxy S6 SM-G920F with lollipop 5.1.1
AP : G920FXXU2BOG8
CSC : G920FOJV2BOG8
has stop being recongnized by pc, i almost tries anything i know and find on net.
The pc doesn't recongnise it on device manager (i have a win 7 pc), the phone however react as pluged in a charger.
their is no mtp or mass storage switch on notification.
i have reinstall the driver of samsung several times with smart switch & also made it manual by suppressing directrly the samsung usb driver from programs on control panel then reinstall it but no hope.
I can't figure out eitheir its hard or soft.
i had change my cable & also test my pc with another Galaxy s6 it works fine, but mine no.
i have made wipe cache / factory reset also made an initialisation from parameters the phone is formated but not recognised by the pc also test it on another pc but the same behaviour windows pcs doesn't recognise my phone.
However, i figure out that when its on the restore mode (volume down + lock + home) the pc recognise it by Odin and smart switch.
i install the same rom on it also made an emergency restore with S/N and model and the process completes fine with smart switch and i saw the donwload progress bar completing on my phone.
but still i m stuck its not recognised please help !!!
i tries to use *#0808# and its on AP / MTP + ADB but no hope
i plug it on ADB android studio but the device list is empty :'(
Try installing latest version of Kies to install updated Samsung drivers.
roydok said:
Try installing latest version of Kies to install updated Samsung drivers.
Click to expand...
Click to collapse
I m having both the latest SmartView & Kies 3
i have done as asked but still no usb detection even after reinstalling usb driver
Try using a different USB cable or different USB port.
roydok said:
Try using a different USB cable or different USB port.
Click to expand...
Click to collapse
i used different cables and pcs but still not recognised
yesterday i used odin with those options :
BL/AP/CP/CSC and checked
Auto-reboot
F.reset Time
phone EFS Clear
Phone bootloader update
it has taking some while to execute but after that my phone was working and detectable again by my pc the problem was resolved for a couple of hours, in the evening the problem occured again.
and i have tried the process again the same why but no connection at all.
i don't know if its a hardware problem or software related problem
because the usb work when i m in restore mode (Odin mode) otherwise no.
Its an advance problem i already check all about usb / cable and pcs related problem.
Problem resolved
I sent my S6 to Samsung SAV it take them 4 days.
they doesn't give me proper answers on what they have done but i saw that my mini-usb plug is new so i expect that they got this part changed accrodingly the samsung has no sign of damage its a clean operation.
Its now detectable. It was indeed a Hardware problem
i have the same issue but in a g928f
today i changer my lcd with the micro usb flex
so all is new except the main board and still is not recognised at any pc with any cable.
i am really starting to feel very sorry for this phone.
odin does not see it at all even at download mode.
i don't know what else to do.
Software or Hardware Issue
I have a s6 920t that I am suppose to pay for at the end of the day. I got it from a friend who bought it while overseas. The only time my computer detects it is in download mode/odin mode, I hear the sound and I see it as "Added". When I try to connect any other way I don't hear the sound my laptop makes when it has detected a new device also otg cables don't work. I just simply want to know if this a software or a hardware issue? Software I can fix but if it is hardware I don't want to waste my money. Please anyone reply as soon as you can so I can decide what to do.
Thank you
I have two S6 Edge and one of them started doing this (phone only appears on USB when in Download mode). When swapping the motherboard between the phones, it works. So the problem isn't with the motherboard, but the USB connection module attached with the ribbon cable... There must be a chip on the module which gets locked somehow and replacing the board is at least one way to fix it. Hopefully someone finds another method without replacing the charger board?
hello friends I have a problem with my samsung tab 2 SGH - i497 when trying to install a custom recovery through the application Install TWRP , now my tab will not start, or load, nor can enter into recovery mode or download mode , please ayudenme I can do to fix it .
Hello,
If your device will not charge, will not boot to any of its modes, has no LED when connected to charger or PC, does not vibrate when power is pressed, will not connect to PC or is not recognized by PC, then unfortunately the device is probably hard bricked and is dead.
There is a chance that a Samsung USB Jig will help you boot it to download mode, they can be found on eBay for $3-5 US. If you get a Jig, insert it in the microUSB port on the device, if it works, it will force the device into download mode and you can then connect to PC and flash your stock firmware or possibly only the stock recovery to replace the custom recovery that bricked your device to recover the device if you are lucky. There may or may not be some other steps required after getting the device recovered to get it correctly repaired, or you might get lucky.
If that doesn't work, then your only other option is to send it in for JTAG service at the repair shop of your choice, you can find them with a Google Search.
Your device probably has a locked bootloader, as do most Samsung devices in the past 2-3 years. Attempting to flash these devices with locked bootloaders with anything other than the devices' current stock firmware or newer results in a permanently bricked device, some can be recovered but not in all cases.
In the future, regardless of how familiar you are with android and flashing, always familiarize yourself with these kinds of details about your specific model number before you do anything to your device. Good luck.
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
luishuiza said:
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
Click to expand...
Click to collapse
Try something like this along with the USB jig.
Samsung Tab USB adapter
Connect the adapter to your Tab then connect the USB jig to the adapter. If the jig is going to help you that will work.
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
TerrorToetje said:
Hi all,
So I have a strange problem, a while back I discovered that I can't connect my S6 to my computer and or other computers, whatever usb cable I use the device is not detected at all. and only charging works.
I already tried more USB cables and validated they work with other devices, I also discovered the USB is not detected in fastboot mode, so I can't flash any images anymore over USB.
I also discovered that I might have flashed a wrong stock rom a few months back and I never tried to connect it to the USB in the meanwhile, when I trace the baseband version it says it's Asian..:crying: And this device is a dutch PHN. The device has ADB working over WIFI and root enabled, it also has TWRP installed and even there MTP is not working!
However i'm afraid there is no way I can flash a stock rom back to the device without a working fastboot, unless there are flashable zips.
What do you guys think?
- MTP does not work
- Fastboot works but USB is not detected (odin, device manager etc).. with all kinds of cables.
- ADB Shell + Root Works (Only over wifi)
- I got a full backup of all partitons, created it with TWRP.
- It's stull running android 5.1.1
Best Regards,
Toetje
Click to expand...
Click to collapse
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
d3nni said:
I can´t belive it, someone who has the same problem then me. A little wierd is that I got 2 phones here.... Got my S6 which I´m using atm and some days ago a friend gave me a A5. Actually the A5 has exactly the same problem and one more problem is, that the "Home Button" of the phone is not working. No chance to root it at all.
It was like this.... I came back home with the A5 and first I thought about was rooting it. Restarted and tryed to go into "Recovery Mode" which wasn´t working, same as going into "Download Mode". So my first thought was that some of the buttons arn´t working. I was right, it was the home button which is without any function. My next idea was rooting over Laptop with Odin. Enabled USB Debbuging, connected a data cable..... and usb connection was not working... only charging!
After like a minute of trying and no success I wen´t eat first. When I came back i tryed again and USB Debbuging asked me to accept the Laptop. (Till now I didn´t thought about that it could be my first and my last time I will have a working USB connection.)
I wen´t into "Recovery Mode" thought about restarting cuz I wanted to go into "Download Mode". So I restarted and that was FATAL.... since then I had no chance anymore till yet to get a working USB connection. No matter which PC, Laptop, USB / Data-Cabel. And since the "Home Button" is not working, I don´t even know how to get Root.
Right now I´m asking myself if it could be a Firmware related problem?! I mean, when my friend gave me the phone there wasn´t the newest update installed on it so I just updated it. It´s a A500FU running stock Android 6.0.1 newest DBT Firmware..... and also I´m not able to change it without having a working USB connection.
Greets!
Click to expand...
Click to collapse
I ordered a new USB port board, will let you know the results!
Any results after changing the usb port?
Did fast charge still work for you? And this replacing the USB port work? I think this is related to a broken USB ic. For me replacing the USB port didn't help
Sometimes it's a bad charging port and / or liquid damage to the charging port.
If your home button clicks but does not work it could be liquid damage near the home button. Same goes for power and volume buttons.
I just fixed a S6 edge plus yesterday power button not working, liquid damage all around power button area, fixed burnt components and corroded pins.
Hi guys, i'm getting this problem and cant connect to pc and i think i've tried it all.
when i connect my phone to the PC, it stars charging but my pc doesn't recognize the device, and my phone doesn't show the notification to make it file transfer.
Could it be a computer issue?
it seems not, i've uninstalled and installed drivers (ADB and Fastboot, oneplus drivers, google drivers) and the problem persist, and even try it on another computer and its the same, the phone does not appear even on Device Manager.
Could it be the Cable?
I don't think so, i'm using the original oneplus cable, it use to work really well before, and i have even connect other phone with the same cable and the other phone is recognize by the computer, so it''s not a cable issue... but I still when to a Tech-store and try other USB-C cables with their computer but my issue still persist (phone isn't recognize, just charge).
Could it be a phone software issue?
Maybe? but i discover this issue 3 weeks ago and a i was on EVOX rom and i thought it would be solved flashing another rom, and i CLEAN FLASH Resurrection Remix Rom, but then the problem was still there!
cant connect even on FASTBOOT MODE...
BTW, before installing RR, i Installed OOS 10.3.4, and still my computer doesnt recognize the phone, YES i have enabled developer options and USB debugging is enabled, and USB PREFERENCES to File transfer, but its not helping me, the "usb for" option its all grayed out and cant change that.
Right now i'm stuck on a RR build without Gapps, and i lost ROOT and RECOVERY, and as you may think, i cant install any of them because i cant connect to my pc, so i'm in a pretty difficult situation here hehe, could you please help me out?
This helped me. Hope it works for you too
I can't paste the link but search "how to get your Android device to show up in file explorer" by how to geek.
Didn't work
xnruaa said:
I can't paste the link but search "how to get your Android device to show up in file explorer" by how to geek.
Click to expand...
Click to collapse
Thanks for your reply, but this didn't work because my device isn't shown on device & printers, or anywhere as far as i checked...
PROBLEM SOLVED.
I think this is the silliest solution I've ever seen, it was just DUST, i clean my USB-C PORT (with a mask xD) and then pluggin, AND VOILA, it worked!!! so keep your ports clean everyone