Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Eleonora67 said:
Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find any information for your device on xda, try asking here
https://forum.xda-developers.com/android-stick--console-computers/help
hopefully the experts there can help
Good Luck
Sawdoctor
ok i'll try
thanks
Related
For two months my s6 had no*problem.Like*any normal smartphones it would connect to pc and can use for data transfer. Yesterday when i connected my s6 to pc it said just cable charging. I removed and connected the cable several times but no luck .Now when i connect my phone to fast charging adapter which came with the s6 ...it says cable charging and takes 1hour 40 mins...Actually it would take only 1hour 20mins. When i connect otg usb (Strontium Nitro 16gb otg usb) nothing happens .it shows only device storage . Guys plzzz help
razivk said:
For two months my s6 had no*problem.Like*any normal smartphones it would connect to pc and can use for data transfer. Yesterday when i connected my s6 to pc it said just cable charging. I removed and connected the cable several times but no luck .Now when i connect my phone to fast charging adapter which came with the s6 ...it says cable charging and takes 1hour 40 mins...Actually it would take only 1hour 20mins. When i connect otg usb (Strontium Nitro 16gb otg usb) nothing happens .it shows only device storage . Guys plzzz help
Click to expand...
Click to collapse
Best place to get help is the [[FAQ][HELP THREAD][GUIDES LIST] Ask Any Question for S6 by Hnk1 thread.
Maybe there is something wrong with the USB port of the phone.
If you clean it, be careful ... you can make things worse.
First try different cables, USB ports on PC, another PC, etc. to exclude some potential causes for this issue.
Good luck !
It_ler said:
Best place to get help is the [[FAQ][HELP THREAD][GUIDES LIST] Ask Any Question for S6 by Hnk1 thread.
Maybe there is something wrong with the USB port of the phone.
If you clean it, be careful ... you can make things worse.
First try different cables, USB ports on PC, another PC, etc. to exclude some potential causes for this issue.
Good luck !
Click to expand...
Click to collapse
Thanx .. i think there something problem with the usb port of my phone
razivk said:
Thanx .. i think there something problem with the usb port of my phone
Click to expand...
Click to collapse
Yes, that's what is looks like to me too.
But you can ask in the help thread I linked ... just in case ...
Maybe someone has a better advice.
Signature:
ROM: AllianceROM v9
Kernel: Stock XXU1BOE6 kernel
Recovery: TWRP recovery by Ktoonsez
Modem: XXU1BOE5[/SIZE]
Thread closed. Thank you!
Hi,
My phone is bricked (totally dead+usb not detected+doesn't boot at all) because i formatted it without installing the new rom. (sp tool was taking too much time and I had to stop the process)
now the phone does not have a rom installed and I cannot boot to recovery mode aswell. everything is gone !!
and the biggest problem is that my pc has not been detecting the phone while it's plugged in via usb cable since i formatted it. :crying:
maybe, can i just install the rom in sdcard then i boot from it?
my phone is versus pioneer p1 ( a.k.a gionee pioneer p1)
Thanks.
Hello,
Welcome to XDA.
If your device doesn't charge, has no LED when plugged in, won't boot to any mode, no vibration when press power and PC gives no sound when device is connected then you are probably hard bricked, if that is the case you'll have to take it to a repair shop, there is a good chance they won't be able to fix it.
Try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help, good luck.
Android mini PC- smart TV box A20 device stuck on booting up screen after software update. Disconnecting power in attempt to reboot won't help as device won't go past booting up android screen. Manual System Flash is required. Any help on how to do it please. Device itself has 2 USB ports ( USB HOST and USB OTG ) and SD card slot? and blue eye power light indicator up on the front, and power socket ( DC5V), Wi-Fi Aerial, AV socket and HDMI cable socket at the back. No other markings on device.
XDA Visitor said:
Android mini PC- smart TV box A20 device stuck on booting up screen after software update. Disconnecting power in attempt to reboot won't help as device won't go past booting up android screen. Manual System Flash is required. Any help on how to do it please. Device itself has 2 USB ports ( USB HOST and USB OTG ) and SD card slot? and blue eye power light indicator up on the front, and power socket ( DC5V), Wi-Fi Aerial, AV socket and HDMI cable socket at the back. No other markings on device.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
First you'll need to register an account so you can post in other forums. After that, you can ask your question here:
Android Q&A, Help & Troubleshooting
You'll receive expert help there. Good luck and welcome to XDA!
Hello.
I have a problem with my lenovo tablet
During flashing a older stock rom in, I selected incorrect rom and now the device doesn't boot.
Doesn't react to holding any combination of volume +/- and power.
Doesn't react to power button at all. If I plug it in to a charger, it doesn't show the charging animation.
SPFlashTool is unable to do anything after I pick the device, it sees it but is unable to flash it in. (I will attach logs after I get home)
Windows still detects a MT65xx Preloader after I plug it into a USB port. (I have removed the MTEK vcom USB driver since the flashing attempt)
Is the situation still salvageable? Can I somehow still give life back to my bricked device?
Thanks in advance.
Well, almost a year later I've bumped into the exact same issue.
Anyone knows how to solve this?
Damn...
----EDIT----
I've managed to sove this. Had to open the tablet and remove the cable that connects the battery. Once reconnected, the tablet was able to be powered on.
Mortvert said:
Hello.
I have a problem with my lenovo tablet
During flashing a older stock rom in, I selected incorrect rom and now the device doesn't boot.
Doesn't react to holding any combination of volume +/- and power.
Doesn't react to power button at all. If I plug it in to a charger, it doesn't show the charging animation.
SPFlashTool is unable to do anything after I pick the device, it sees it but is unable to flash it in. (I will attach logs after I get home)
Windows still detects a MT65xx Preloader after I plug it into a USB port. (I have removed the MTEK vcom USB driver since the flashing attempt)
Is the situation still salvageable? Can I somehow still give life back to my bricked device?
Thanks in advance.
Click to expand...
Click to collapse
i too have the same problem i tried to flash recovery by unlocking bootloader
but in turn it was unable to boot now its just a paper weight it does not even shows charging logo anything simply dead
is there any fix i really need it please someone
Bricked Lenovo Tab 2 A7 10F
I was trying to flash TWRP and get my Lenovo Tab 2 A7 10F to root but during the process i don't know which scatter file i chose since it the scatter files were more than 1.
So i tried one by one all of the three scatter files and tried to flash but I don't know which scatter file i chose. So i removed the USB from my tab since the bar at the bottom wasn't progressing and now the tab won't turn on.
KINDLY SUGGEST ?? :'( :'( Otherwise my dad go angry on me. PLEASE !!! PLEASE !!! PLEASE !!! PLEASE !!! SOMEONE SAVE ME _/\_
---------- Post added at 07:09 AM ---------- Previous post was at 06:57 AM ----------
Typhus_ said:
Well, almost a year later I've bumped into the exact same issue.
Anyone knows how to solve this?
Damn...
----EDIT----
I've managed to sove this. Had to open the tablet and remove the cable that connects the battery. Once reconnected, the tablet was able to be powered on.
Click to expand...
Click to collapse
How did you managed to do that when the tab has a non-removable battery ??? I have a Lenovo Tab 2 A7-10F
Doggo_Meme said:
How did you managed to do that when the tab has a non-removable battery ??? I have a Lenovo Tab 2 A7-10F
Click to expand...
Click to collapse
I just opened the back cover and disconnected the battery cable. I didn't remove the battery.
Anyway, you can search youtube for videos that shows you how to open the back cover.
Cheers!
Thanks for the help!!! had the same issue
Mortvert said:
Hello.
I have a problem with my lenovo tablet
During flashing a older stock rom in, I selected incorrect rom and now the device doesn't boot.
Doesn't react to holding any combination of volume +/- and power.
Doesn't react to power button at all. If I plug it in to a charger, it doesn't show the charging animation.
SPFlashTool is unable to do anything after I pick the device, it sees it but is unable to flash it in. (I will attach logs after I get home)
Windows still detects a MT65xx Preloader after I plug it into a USB port. (I have removed the MTEK vcom USB driver since the flashing attempt)
Is the situation still salvageable? Can I somehow still give life back to my bricked device?
Thanks in advance.
Click to expand...
Click to collapse
Hey, i was in the same problem some weeks ago.
I finally figured it out after spending 2 nights continuously, so here is what you need to do.
1. Carefully open the back cover of your tablet and find the square connector which connects the battery and disconnect it.
2. Now download the stock Kitkat rom for the tablet from xda.
3. Install vcom drivers for mediatek 65xx.
4. While the connector is removed plug the cable to the computer or laptop.
5.Then connect the mini usb to your charging port (Again the connector should not be attached to motherboard).
6. Load scatter file in sp flash tool uncheck preloader, MBR and SEC_RO.
7.Then hit the start button and wait for it!
8. Now remove the cable, attach the battery connector to motherboard. AND BOOT!!!:good::good::victory:
If this help you please give a thanks.
I've managed to brick my device by mistakenly flashing for KI Pro. Now whenever I connect to power blue light turns on but there is no display. I have tried Amlogic USB Burning Tool and SD card burner method but both don't work in this case. I have tried Pin Shorting Method (pin 6 and pin 7) of emmc But even then it is not detected by PC.
Is there any solution? or can somebody point me to the right forums where I can get help
Any help in this regard would be much appreciated:good: is