Android mini PC- smart TV box A20 device stuck on booting up screen after software update. Disconnecting power in attempt to reboot won't help as device won't go past booting up android screen. Manual System Flash is required. Any help on how to do it please. Device itself has 2 USB ports ( USB HOST and USB OTG ) and SD card slot? and blue eye power light indicator up on the front, and power socket ( DC5V), Wi-Fi Aerial, AV socket and HDMI cable socket at the back. No other markings on device.
XDA Visitor said:
Android mini PC- smart TV box A20 device stuck on booting up screen after software update. Disconnecting power in attempt to reboot won't help as device won't go past booting up android screen. Manual System Flash is required. Any help on how to do it please. Device itself has 2 USB ports ( USB HOST and USB OTG ) and SD card slot? and blue eye power light indicator up on the front, and power socket ( DC5V), Wi-Fi Aerial, AV socket and HDMI cable socket at the back. No other markings on device.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
First you'll need to register an account so you can post in other forums. After that, you can ask your question here:
Android Q&A, Help & Troubleshooting
You'll receive expert help there. Good luck and welcome to XDA!
Related
For two months my s6 had no*problem.Like*any normal smartphones it would connect to pc and can use for data transfer. Yesterday when i connected my s6 to pc it said just cable charging. I removed and connected the cable several times but no luck .Now when i connect my phone to fast charging adapter which came with the s6 ...it says cable charging and takes 1hour 40 mins...Actually it would take only 1hour 20mins. When i connect otg usb (Strontium Nitro 16gb otg usb) nothing happens .it shows only device storage . Guys plzzz help
razivk said:
For two months my s6 had no*problem.Like*any normal smartphones it would connect to pc and can use for data transfer. Yesterday when i connected my s6 to pc it said just cable charging. I removed and connected the cable several times but no luck .Now when i connect my phone to fast charging adapter which came with the s6 ...it says cable charging and takes 1hour 40 mins...Actually it would take only 1hour 20mins. When i connect otg usb (Strontium Nitro 16gb otg usb) nothing happens .it shows only device storage . Guys plzzz help
Click to expand...
Click to collapse
Best place to get help is the [[FAQ][HELP THREAD][GUIDES LIST] Ask Any Question for S6 by Hnk1 thread.
Maybe there is something wrong with the USB port of the phone.
If you clean it, be careful ... you can make things worse.
First try different cables, USB ports on PC, another PC, etc. to exclude some potential causes for this issue.
Good luck !
It_ler said:
Best place to get help is the [[FAQ][HELP THREAD][GUIDES LIST] Ask Any Question for S6 by Hnk1 thread.
Maybe there is something wrong with the USB port of the phone.
If you clean it, be careful ... you can make things worse.
First try different cables, USB ports on PC, another PC, etc. to exclude some potential causes for this issue.
Good luck !
Click to expand...
Click to collapse
Thanx .. i think there something problem with the usb port of my phone
razivk said:
Thanx .. i think there something problem with the usb port of my phone
Click to expand...
Click to collapse
Yes, that's what is looks like to me too.
But you can ask in the help thread I linked ... just in case ...
Maybe someone has a better advice.
Signature:
ROM: AllianceROM v9
Kernel: Stock XXU1BOE6 kernel
Recovery: TWRP recovery by Ktoonsez
Modem: XXU1BOE5[/SIZE]
Thread closed. Thank you!
Hi,
I broke the screen of my phone, and it is not responsive. Still I can see things and the phone is working. So to access the phone, I bought an OTG cable and connected an USB mouse to it. But it is not working (the mouse is not powering up). As I can not access my phone to install any apps or even if I install an app from browser, I can not open it. So is there a way to install any package or something which can enable the OTG support? My phone is rooted and I can access recovery mode.
Details of my phone:
Name: Karbonn titanium s5
OS: Android 4.2.2
sounaak said:
Hi,
I broke the screen of my phone, and it is not responsive. Still I can see things and the phone is working. So to access the phone, I bought an OTG cable and connected an USB mouse to it. But it is not working (the mouse is not powering up). As I can not access my phone to install any apps or even if I install an app from browser, I can not open it. So is there a way to install any package or something which can enable the OTG support? My phone is rooted and I can access recovery mode.
Details of my phone:
Name: Karbonn titanium s5
OS: Android 4.2.2
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. There is no forum specifically for the Karbonn S5 Titanium but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help where members familiar with your device might be able to advise you.
Good Luck!
Hi,
My phone is bricked (totally dead+usb not detected+doesn't boot at all) because i formatted it without installing the new rom. (sp tool was taking too much time and I had to stop the process)
now the phone does not have a rom installed and I cannot boot to recovery mode aswell. everything is gone !!
and the biggest problem is that my pc has not been detecting the phone while it's plugged in via usb cable since i formatted it. :crying:
maybe, can i just install the rom in sdcard then i boot from it?
my phone is versus pioneer p1 ( a.k.a gionee pioneer p1)
Thanks.
Hello,
Welcome to XDA.
If your device doesn't charge, has no LED when plugged in, won't boot to any mode, no vibration when press power and PC gives no sound when device is connected then you are probably hard bricked, if that is the case you'll have to take it to a repair shop, there is a good chance they won't be able to fix it.
Try posting your issue in the forum linked below.
http://forum.xda-developers.com/android/help
The experts there may be able to help, good luck.
Hi,
My phone is turned off and when I connect it with my laptop (same with my PC) it keeps getting disconnected and reconnected. My phone is ZTE Blade Q Maxi.
First, I thought that the problem was my USB cable or USB slot, but in the end, they're okay. The drivers I have installed on my laptop are following: Android ADB interface, DA USB VCOM Port, Gadget Serial (there's probably more, but they're seperated in categories). I noticed when I connect my phone, 1 driver appears - Preloader USB VCom port, about 2 seconds becauses instantly it gets disconnected.
Any help would be highly appreciated.
Thanks in advance!
XDA Visitor said:
Hi,
My phone is turned off and when I connect it with my laptop (same with my PC) it keeps getting disconnected and reconnected. My phone is ZTE Blade Q Maxi.
First, I thought that the problem was my USB cable or USB slot, but in the end, they're okay. The drivers I have installed on my laptop are following: Android ADB interface, DA USB VCOM Port, Gadget Serial (there's probably more, but they're seperated in categories). I noticed when I connect my phone, 1 driver appears - Preloader USB VCom port, about 2 seconds becauses instantly it gets disconnected.
Any help would be highly appreciated.
Thanks in advance!
Click to expand...
Click to collapse
Hi and welcome to XDA.
Please create an account so you can have full posting privileges.
Then you can post your question here:
Android Q&A,Help and Troubleshooting.
Experts there may be able to help you.
Good luck
Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Eleonora67 said:
Hello everyone
my Pipo suddenly decided not to boot anymore, than I went its BIOS and mistakenly disabled USB OTG feature now it refuses even to le me browse within the BIOS to restore it, sadly unplugging CMOS battery for hours did not help so it must be in NVRAM or something like that.
Tablet has Intel dnx feature but not micro usb connector (only 4 USB type a, one of them is blue)
Tablet also has sdcard slot
There's any known solution to reset BIOS ?
many many thanks
Ele
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find any information for your device on xda, try asking here
https://forum.xda-developers.com/android-stick--console-computers/help
hopefully the experts there can help
Good Luck
Sawdoctor
ok i'll try
thanks