Database Info

Way to a root (r)

http://forum.xda-developers.com/showthread.php?p=22191861
root for 970
Who can put it to p920？
All items are strictly in the order do not jump over them and keep the sequence!
Spoiler (+ / -) (I advise you to read before flashing)
to the root of drive C:
Two. Download Attachment SmartFlashTool_External.rar (1.18 MB) Number of downloads: 37
and extract the root of drive C:
3. Download Attachment Superuser.zip (611.2 KB) Number of downloads: 51
and put ( no need to unpack ) File on the SD-card phone
4. Turn off the phone.
Five. We hold the Volume Up (+) and insert the USB cable one end into the computer, the other into the phone
6. We will have the text of S / W Upgrade Please wait while upgrading ...
Spoiler (+ / -)
7. Run the file B_SmartFlashTool_Extern.exe
Eight. Go to the tab ROM copy D / L
9. Select the two files that you extracted from the archive [PATCHED] BIN_LGP970AT-00-V20a-CIS-XXX-JAN-06-2012 +0.7 z
10. Check:
Spoiler (+ / -)
11. Click the Start button
12. Go to the process of the firmware, go to drink coffee \ tea shorter depart away from your computer to your phone
13. When you sign Download Comlete! Go to the phone
Spoiler (+ / -)
14. On the phone, we see the regime Recovery (touch it, the management of a finger)
15. Select install zip from sdcard
16. Then choose zip from sdcard
17. Prolistyvayem and choose Superuser.zip
18. Prolistyvayem and select Yes - Install SuperUser.zip
19. Select + + + + Go back + + + +
20. Choose wipe data / factory reset
21. Prolistyvayem and select Yes - delete all user data
22. Then reboot system now
That's it! Phone is loaded, if you do it right!
As a result, we have a firmware with the Root-V20A human touch and Recovery! Thank you all and good luck to you in the firmware!
Click to expand...
Click to collapse

That rom for p970 is already patched,the standart recovery is replaced by cwm
We need to do the same with p920 bin rom,but the method of unpacking and repacking .bin I don't know.

this method uses an already patched .bin file in which they replaced the lg recovery mode with cwm. unless you can find bin files of the rom you want to root through this method and patch it likewise it wont work. now to get the files from a kdz you need to grab them while they are extracted during the kdz update process. they go to the folder C:\ProgramData\LGMOBILEAX\Phone which is deleted after process completes. you can create a symbolic link to a folder of your own and then the files will stay in that folder. that is the only way I know of getting files out of a kdz file. still i think the files you get are a "modelname".dll and a wdb file which is the firmware. to process further the wdb file you need lgutils and the .dll you got from the kdz. I have read somewhere though that latest versions of the kdz updater give you directly baseband and .bin files when extracting the kdz not sure though as I havent tried it.

If we had the baseband download for each rom than it would be easy to root.

How to recover SE mini pro / How to use flash tool

How to recover your SE mini pro / How to use flash tool
1. Download Flash tool
2. Download stock rom
3. Go to Advance tab -> bundle creation
4. Select your extracted stock rom folder and click open
5. it will open all *.sin files. Click on ">" button to add into firmware content.
6. Give any names to "Device", "version" and "branding".(DVB)
7. Click on ok. you will get *.ftf file same name as DVB.
8. Drag this file into flashtool, it will add and finish bundle creation.
9. No connect your phone in flash mode (hold back button while connecting and hold it while completing all process)
10. After 100% your phone will be rebooted else manually Reboot it just.
You can download directly my *.ftf file , send me private message.
Posting this info with images and video soon.
Thanks all.

How to install u10 update in u251 version?

I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?

I dont now if works..., and this is B360!
dvf1278 said:
I'm new user in this forum.
I have the g6-u251 version, and My question is that i don't know how install the u10 B330 version update. Please help me!
POR FAVOR AYUDEN
ANDROID 4.4 EMUI 3 IN ASCEND G6 U251?
Click to expand...
Click to collapse
ROM B360 AVAILABLE for G6-U10.
-----
- Download official B136 Rom from austrian Huawei site
http://download-c.huawei.com/downlo...343&version=54000&siteCode=at&hc_location=ufi
- Extract the dload folder to PC and copy to SD card.
- Go to Options→System Info→Update System→Local Update
---- Phone will reboot in recovery mode and install the update. At the end you'll have Emui 2.0 JellyBean Rom B136 as your system
------------ If you previously flashed a custom recovery (i.e. CWM or TWRP) deleting the stock one, you'll get an error similar to "E:Invalid command argument". You have two solutions:
---------------- 1)Turn off the phone, press Volume DOWN+Volume UP+Power buttons, release power on boot, vols when start to flash it.
---------------- 2)Download this, is the original recovery image, https://docs.google.com/file/d/0B0xf81pxOQgxTVpxU3RaTWNyRWc/edit and flash it by fastboot with ADB,
fastboot flash recovery recovery.img
- Now reboot the phone and it should notifies of an available update to KitKat, rom B360. Simply accept the update.
- If update doesn't get proposed, download this file:
update.zip - https://drive.google.com/file/d/0B0xf81pxOQgxcWs1QVlLNllPVlE/view?usp=sharing&hc_location=ufi&pli=1
- Put the archive update.zip into "HwOUC" folder inside the sd-card, if dont have it you can created
- Go to Options→System Info→Update System→Local Update
---- Your system will be updated to Emui 3.0 KitKat Rom B360.
------If not, turn off the phone, press vol UP and power, clean cache and go to update by zip, look for the file update.zip
------Done
If you have missing apps in the end, to fix you need bootloader unlocked:
!!!!!!»»»»»»»»»»»How to Unlock your bootloader««««««««««««!!!!!
1º Request code to Huawei by e-mail
Ex:
" Hi!
My name is (your name) and I hereby request the bootloader code for my new smartphone HUAWEI ASCEND (your phone model) if possible.
Product SN: (In the backs)
IMEI: ( in key pad *#06# )
Product ID: ( in key pad *#*#1357946#*#*)
Thank you for your attention;
(your name) "
->This are the e-mails (Use the PC, is better) :
[email protected]; [email protected]
PS: When copy paste to send it, please change what is inside of ( ), there are how send it like it is!!!!! Belive me, you never, never,never gona recive anything if goes like this!!!!
When you get the code!
You need ADB!
This one have already a software to unlock the phone
( Huawei_Bootloader_Unlocker ). and , than press "Desbloquear":
https://meocloud.pt/link/32ef02e9-4fd9-4963-ab33-622536ff34ff/ADB/
Only need to extract ADB folder from zip to desktop
--------------------------------------------------------------------------------
-with phone ON, turn on debug mode, open ADB_TOOLS folder and execute Boot_in_fastboot_mode.exe
»»»» OR
->Turn off the phone
->press vol - and power, release power on boot, release vol when you see the fastboot screen
--------------------------------------------------------------------------------
->plug the usb, let pc install the phone
->see if pc find the phone, execute See_if_phone_is_recognized.exe
-> must say samething like - 584566515 fastboot
-> if not, you must install the drivers for the phone or change the usb door.
->execute Huawei_Bootloader_Unlocker from the folder ADB TOOLS
->insert the code where says "Unlock code"!
->click in "desbloquear!"
->phone reboot and do a factory reset.
->Done
Now you need CWM recovery and kinguser.zip to root, Download this files:
-CWM-U10.zip:https://mega.co.nz/#!XpYxGC6D!K0dE4-sr7LmauOrVTRwlE5Qx8eX-mKfqNkTXteUkrTU
-UPDATE-Kinguser-3.4.0:https://mega.co.nz/#!bhp2AZyL!6R1zHtVrWC08tkHAcxv5XtwfjZjx_VbjV3qH2ezELuo
1. Unlock bootloader: https://www.facebook.com/groups/huawei.g6.development/permalink/457458214413436/
2. Download adb if you dont have it, from the link above:
3. extrad ADB TOOLS from zip to desktop, open it and open ADB_TOOLS
4. In PC go to c:\Windows\System32 look for cmd, COPY and paste in ADB_TOOLS.
5. Press volume down and power button to go in fastboot mode, and plug the phone in to PC.
6. Open cmd (doble click in cmd)
7. Type this:
Fastboot flash recovery CWM.img
fastboot reboot
8. Copy "UPDATE-Kinguser-3.4.0.zip" to your SD CARD
9. Turn OFF the phone, press vol + and power, release power on boot to go to recovery mode CWM
10. clear cache
11. Press install zip from sd card
12. Click update UPDATE-Kinguser-3.4.0.zip
13. wait for confirmation and after that when it complete REBOOT your phone
14. After rebooting go to Google play and install any root checker to see if is OK.
Now fix Cust:
The Roms are created for a specific provider , with a specific configuration. A ROM can be compatible with various models , such as U10 with the U251 , L11 with P7mini or even between the same zone countries .
But in the end we find small problems , such as lack of Shortcut Bar in version 4.3 and lack of applications in version 4.4 ! It has to do with the configuration of the CUST folder. How to fix ? We need access ROOT and an explorer as the Root Browser , which can be found in Google Play.
With Root Browser, in this case, we will go to folder /DATA and seek the custom.bin file, open it as a text file, you will see something such as vodafone/pt, for example, now we left the folder /DATA and go to the folder /CUST , we open it and we will usually find a folder with the name hw, we will change the name of it to the first name that we saw in custom.bin in our example will is vodafone, use small font, now we entered the vodafone folder and we will find another folder that usually his name is normal, let's switch to the second name of our exemple which will be pt, use small font!
Now just leave the Root Browser , turn off your phone , enter the recovery , perform a factory reset and start the phone normally.All will be fixed.
Tell if works!

like write data
[Hi, I have the g6 u251 but when i try to install it, says something like write data error update.app is a invalid package, how do i fix it?

Can you fix this Problem????

Hi i have an Honor8 and it's kinda destoryed
Problem :
1 Phone is stuck honor 8 logo or it show me the EMUI Huawei eReocover where i have three options A) shutdown B) reboot C) Download latest Version and recovery [ tried options C But i fails to download the package everytime ]
2: my honor 8 is usb dead meaning my pc dosent recognize my phone in anyway so.... yeah
3: Dont have stock Rom or custom rom
4: cant boot to twrp recovery at all
Good news at this point :
The Power and volume bottoms work ..........
Oh and i have Mrico SD card .........
IF you can solve this Problem you my friend are a certify genuineness

Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
are you saying that i should download the Frimeware to the miroc sd and press + - and power toghther i ll try that
and i cant boot to twrp to flash the zip
the for the replay i'll report after i try it

Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
I tried it but it said the the uppdate pakage dosent exist

Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.

Rommco05 said:
You have all ready fw in sdcard? Go to Huawei web download full firmware B131 and copy this file to sdcard
Click to expand...
Click to collapse
Yes i have Frimeware in my sdcard what know?

PhantonKid said:
Yes i have Frimeware in my sdcard what know?
Click to expand...
Click to collapse
press volume up, down and power when you start the phone. The firmware (UPDATE.APP) should be in a folder called dload and it should install.

Solved it guys thx for all the Help
it work omg so happy dint have i phone for tre days
download the Frimeware
Extart it
made new fold named dload
put the Uppdare.app in dload
power voulme + and -
and magic it works
you are all certify genuineness

StratOS_HTC said:
Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.
Click to expand...
Click to collapse
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??

PhantonKid said:
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??
Click to expand...
Click to collapse
The file named "Update_data_full_hw_(insert your region here).ZIP" It's a US, EU or Asia specific file you should flash as well. It include soft keyboard and other useful stuff.
Place ALL of its contents in the dload folder when flashing.

Honor 8 update

Hello guys. I have a Honor 8 (Al-C900B120 version) how run Android 6.0 with EMUI 4.1. I want to update it to Android 7 and EMUI 5 or more but i don.t find the pack with update because my phone don.t want to riceve it. Can somebaby help me to solve this think and let here a link .
Tnk !

Hello! Do you already tried to install and use HiSuite software on your computer to get an update?

Micdu70 said:
Hello! Do you already tried to install and use HiSuite software on your computer to get an update?
Click to expand...
Click to collapse
Yes but nothing

Iosifcosmin said:
Yes but nothing
Click to expand...
Click to collapse
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
if i do this , in the chines version the google play will be work ?

Iosifcosmin said:
if i do this , in the chines version the google play will be work ?
Click to expand...
Click to collapse
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).

Micdu70 said:
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).
Click to expand...
Click to collapse
My phone is Al-10

Iosifcosmin said:
My phone is Al-10
Click to expand...
Click to collapse
EDIT: Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info". If you see "Vendor: all" and "Country: cn" = OK you can follow:
EDIT 2: If you see "allwyf" in vendor info, tell me and I will give you the good zip files!
Try to flash FRD-AL10C00B396 - "all-cn" vendor - January 2018 security patches included, via dload method. But there is 3 files to flash (in order!):
0) Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop.
/!\ It's better to use a SD Card, don't know if it works if you send files into Internal Storage! /!\
First flash: update.zip
1) Unzip archive, create "dload" folder inside root of SD Card memory if not present -or- delete "dload" content if exists, then transfer extracted file named "UPDATE.APP" inside "dload" directory.
2) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3) First Boot can take some minutes, wait patiently...
Second flash: update_full_FRD-AL10_all_cn.zip
4) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
5) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
6) And... Boot again... ^^
Third flash: update_data_full_public.zip
7) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
8) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
9) All files were flashed! OTA update will not give you updates because it's the latest OTA update (currently)...
10) If any issue, Factory Reset can help.

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
i follow your steps but when i turn on my phone (press up and down key + power key) the update stop at 5% and it stuck.... and after that it turn . What can i do to work the update?

What do you see/have when you do this:
Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info".
?