Database Info

Can't update huawei ascend mate 7

Hello everyone,
So i wanna update my phone but when i click on install update this comes up:
Your system has been adjusted. Now when you run an online update, this can make the system unstable. Instead, you are advised to download the official update package and update via the SD card . Nevertheless continue with the online update ?
If i do it, it shows me update failed.
I'm at B137SPO3
I hope anyone can help me
Sorry for bad english
Cheerz, Yorick

You have root access i thing . You have to load your current system from adb then you have to update .

Just load the 137 recovery img. If your rooted its just like cad said so you needed the original recovery.
Sent from my HUAWEI MT7-L09 using Tapatalk

Since it happened to me as well:
(1) get the B137SP03 OTA package
(2) download the Huawei extractor
(3) use the Huawei extractor to get the file "recovery.img" from the OTA
(4) reboot with adb/flashboot and flash the recovery,img , then reboot
(5) try again the OTA install (either local update or ota, it does not matter): it may or not may not work
-if it does not work-
(6) make a full backup with the backup utility
(7) get the B137SP03 FULL package (it is 1.2 Gbytes, much bigger than the OTA)
(8) from the package get the update.app and put into the dload folder of your SD card
(9) perform a forced update (reboot by pressing vol up, vol down, power all together)
(10) restore the backup with your apps and data
(11) try the OTA install (either local update or OTA) which now should work
Anubis

Anubis1965 said:
Since it happened to me as well:
(1) get the B137SP03 OTA package
(2) download the Huawei extractor
(3) use the Huawei extractor to get the file "recovery.img" from the OTA
(4) reboot with adb/flashboot and flash the recovery,img , then reboot
(5) try again the OTA install (either local update or ota, it does not matter): it may or not may not work
-if it does not work-
(6) make a full backup with the backup utility
(7) get the B137SP03 FULL package (it is 1.2 Gbytes, much bigger than the OTA)
(8) from the package get the update.app and put into the dload folder of your SD card
(9) perform a forced update (reboot by pressing vol up, vol down, power all together)
(10) restore the backup with your apps and data
(11) try the OTA install (either local update or OTA) which now should work
Anubis
Click to expand...
Click to collapse
I can't find a B137SP03 OTA package on internet

YorickDrossaert said:
I can't find a B137SP03 OTA package on internet
Click to expand...
Click to collapse
Here:
http://www.huaweiblog.de/huawei/firmwareupdate-b137-fuer-mate-7-ota/
Anubis

Can you fix this Problem????

Hi i have an Honor8 and it's kinda destoryed
Problem :
1 Phone is stuck honor 8 logo or it show me the EMUI Huawei eReocover where i have three options A) shutdown B) reboot C) Download latest Version and recovery [ tried options C But i fails to download the package everytime ]
2: my honor 8 is usb dead meaning my pc dosent recognize my phone in anyway so.... yeah
3: Dont have stock Rom or custom rom
4: cant boot to twrp recovery at all
Good news at this point :
The Power and volume bottoms work ..........
Oh and i have Mrico SD card .........
IF you can solve this Problem you my friend are a certify genuineness

Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
are you saying that i should download the Frimeware to the miroc sd and press + - and power toghther i ll try that
and i cant boot to twrp to flash the zip
the for the replay i'll report after i try it

Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
I tried it but it said the the uppdate pakage dosent exist

Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.

Rommco05 said:
You have all ready fw in sdcard? Go to Huawei web download full firmware B131 and copy this file to sdcard
Click to expand...
Click to collapse
Yes i have Frimeware in my sdcard what know?

PhantonKid said:
Yes i have Frimeware in my sdcard what know?
Click to expand...
Click to collapse
press volume up, down and power when you start the phone. The firmware (UPDATE.APP) should be in a folder called dload and it should install.

Solved it guys thx for all the Help
it work omg so happy dint have i phone for tre days
download the Frimeware
Extart it
made new fold named dload
put the Uppdare.app in dload
power voulme + and -
and magic it works
you are all certify genuineness

StratOS_HTC said:
Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.
Click to expand...
Click to collapse
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??

PhantonKid said:
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??
Click to expand...
Click to collapse
The file named "Update_data_full_hw_(insert your region here).ZIP" It's a US, EU or Asia specific file you should flash as well. It include soft keyboard and other useful stuff.
Place ALL of its contents in the dload folder when flashing.

Honor 8 bootloop issue!!!! (HELP!!!)

Folks,
I recently bought a Honor 8 and was trying to unlock the bootloder, install twrp and supersu by following the link below
https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-install-twrp-t3554789
As stated in the link above, I got to the steps to install supersu. However, on following step 12, it has formatted the data and now the phone is in a bootloop(stuck on the blue screen showing HONOR label)
I'm guessing my phone will not boot up since the OS has been erased. Could someone please help me restore this phone to back to the stock firmware and steps needed to do so. I am new to Honor phones, so not sure what I need to do and steps needed. Would appreciate any help if possible??
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system

Download the rollback and marshmallow firmware package from honors website. Rename the rollback package to "UPDATE.APP" and place it in a folder called "dload" in your micro SD card. Put the micro SD in your phone, and boot into the firmware update screen (volume up + volume down + power all at the same time). Once it's done, delete the old UPDATE.APP file from the dload folder, rename your marshmallow firmware package to "UPDATE.APP", place it in the dload folder on your micro SD card, place the micro SD in your phone, and again flash the firmware using volume up +volume down +power

Since you still have access to the SD Card via USB, you can just download your firmware, extract it and put the UPDATE.APP in a dload folder on a microSD card and press all 3 buttons when starting up the phone to start installing the OS again.

Appreciate the feedback. I tried going to the below website to pick up the rollback package and the firmware( Android 6.0)
http://www.hihonor.com/us/support/search-result/index.html?keywords=Honor%208%20Firmware
My question is that is it possible to just restore it back to android nougat(7.0) in the U.S or has the 7.0 not released for the U.S markets yet?
I found the following link below for the Android 7.0(Nougat) firmware for Honor 8 but not sure if this work on the phones bought in the U.S
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Appreciate your feedback on this..

Since the phone is in bootloop, I would have to use a different phone and it's SD card slot to download the firmware and then put it on the Honor 8. I'm guessing the rollback process would only apply if I wanted to go back to the Marshmellow firmware. My question though is would I be able to restore it back to Android Nougat(7.0) if possible.
I found the following link below for the Nougat(7.0) firmware. Not sure if this will work on the U.S phones. Is there a different process to restore it back to Nougat?
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14

You can try just getting the nougat firmware onto your micro SD, then pressing volume up + volume down + power to see if it works. Worse case scenario is that you'll get an error.
If you do get an error, your can try the rollback procedure. Once you get marshmallow running you can always just update back to nougat with OTA.
Oh yeah, you don't necessarily need another phone. Just get a micro SD card adapter and plug it into your computer, then transfer the files into the dload folder
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
You can use the following link for marshmallow firmware. Again, you can always update to nougat later using OTA
https://forum.xda-developers.com/honor-8/development/models-stock-firmware-packages-honor-8-t3501942

thanks for the info..just another clarification. The nougat firmware I found online was a zip file that included 3 files(attached snapshot) . I noticed one of the files is the UPDATE.APP.
My question is on creating the new dload folder do I need to remove the other two files or just copy all of 3 files in the dload folder before I try to restore the phone back.. Sorry if it's a straight-forward question, but I just want to make sure I'm doing this right.
Much thanks...

Just the UPDATE.APP
What are the other 2 files? Just curious

there is a folder called : META-INF which has some files in it and also a file called: full_mainpkg.tag which is only a 1KB file so maybe that's inconsequential.

Did you try out the procedure yet? The META-INF folder should not be necessary. You can always try the method with and without the folder included if you really need to.

I did...it did do the update following the steps you mentioned and it seems everything went fine as far as the update is concerned. I didn't get any errors, but once the phone rebooted it is still stuck on the blue screen with the Honor logo on it

Have you tried the rollback procedure as well?
---------- Post added at 04:16 AM ---------- Previous post was at 04:08 AM ----------
If neither procedure worked, you can try another procedure which involves extracting SYSTEM.IMG, BOOT.IMG, RECOVERY.IMG, and CUST.IMG from the UPDATE.APP file, then flashing all of them through fastboot, and finally preforming the rollback procedure again.

was finally able to get the phone to reboot and load the firmware. It does seem that there is some issue with the keyboard now as it's only showing OK google as the keyboard so I don't have a keyboard anymore. Not sure how to go around this. Also the phone seems a little laggy and unresponsive at times which wasn't happening earlier. I'm thinking of trying the rollback method to see if that helps or improves the performance of the phone. Let me know of you have any suggestions. Thanks again for your help...

That's a known issue with the keyboard. For some reason it does not function correctly after a factory reset. The rollback should fix everything. Once you are back on marshmallow, just update back to nougat (if you want to) through OTA system update.
Edit: it might actually be easier to just perform a factory reset on the nougat firmware. I'm assuming your data was wiped through the procedure anyway, right?

I can do the rollback but I just realized that I have the 64GB version which is the FRD-L14
http://www.phonemore.com/huawei-honor-8/models/629
I'm not sure if there is a FRD-L14(64GB) variant of the MM firmware available anywhere. If so, I'm not aware of the link of the site to find it. Secondly, if I do install the FRD-L04(32GB) variant of the MM firmware would that create problems for the phone in upgrading and later trying to root and install custom ROM etc.
Much Thanks

The nougat firmware your flashed earlier, was it the L14 firmware? I would not flash a L04 firmware on a L14. Instead, you can probably flash the L14 nougat firmware (unless you already did) and then perform a factory reset
EDIT: Refer to this thread:
https://forum.xda-developers.com/honor-8/how-to/frd-l14-users-how-to-restore-downgrade-t3537433
The OP uploaded the correct L14 firmware files. Remember to first flash the rollback package, then the firmware.

the firmware I flashed earlier was the L14 firmware. I went to the link you mentioned above in your post. It's a little confusing as far as the exact steps that need to be followed as people seem to be adding/modifying steps. Would help if I could get a clear step process on how/what to follow.
Also, is it okay to flash the rollback package and then flash the nougat firmware package for L14 if I am currently on nougat(not fully functioning as mentioned in the posts above).
This link below from your reference thread has a few L14 firmware's. I had earlier picked up the first one from the list. Not sure if that's the correct one to flash..
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Thanks again...

The rollback package is only used if you're downgrading from nougat to marshmallow. Otherwise, you don't need it. Since you were having some issues after flashing the nougat firmware, I would recommend that you rollback, and then update to nougat afterwards. Here's a step by step:
1. Get an micro SD card. Create a folder on it called "dload"
2. Download the F14 rollback package from the following link:
http://download-c.huawei.com/download/downloadCenter?downloadId=92098&version=360320&siteCode=us-h
Extract the UPDATE.APP file, and place it into your dload folder. Pace the micro sd into your phone
3. With the phone shut off, press volume up + volume down + power to flash the UPDATE.APP. Once it's done, shut down your phone and remove the sd card
4. Download the F14 Marshmallow firmware from the following link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1201/g88/v66294/f1/full/update.zip
Extract the UPDATE.APP, and replace the old UPDATE.APP in the dload folder with the new one you just downloaded.
5. Place the micro sd into your phone. Repeat the button combination to flash it. Once it's done, shut down your phone.
6. Press volume up + power to boot into system recovery. Wipe the phone's data from this screen.
7. Boot into the phone. Go to settings -> About
Check to see if the model# etc is correct. If it is not, complete step 8. Otherwise go to step 9:
8. Download the following file:
http://update.hicloud.com:8180/TDS/...94/f1/full/hw/usa/update_data_full_hw_usa.zip
Extract the UPDATE.APP, place it in the dload folder, and flash it.
9. Boot into the phone. If you want to update to nougat, do the following:
Go to your dialer, and type *#*#2432546#*#*
This will force your phone to check for updates.
Then go to Settings -> Updater to update to nougat

I did follow your steps, but my keyboard has now vanished when the set up screen appears. It only shows google voice and I'm having trouble setting up my phone. Has anyone had the same problem. What can I do to get my keyboard back?
Note: my phone is unrooted. Not sure if that makes a difference

HwOTA for Huawei Mate10 Lite

HwOTA 7+8 for Huawei Mate 10 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA 7+8
Short video tutorial for upgrade of any version authorized or unauthorized in phone P10 Lite Thanks @Alexxxx1
HwOTA8 method for rollback from EMUI 8 to Emui 5 - Huawei P10 lite Thanks @Alexxxx1
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!

vovan1982 said:
HwOTA for Huawei Mate 10 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
Hello
thank you, worked for me.
from rne-l21c432b133, i got to rne-c432b135, and the bootloader is locked.
thanks thanks.

thank you works

Exodusnick said:
thank you works
Click to expand...
Click to collapse
For Oreo beta?

No to RNE-L21C432B135 Nougat
I haven't tested it for oreo beta I'm back to MORFUZ V 1.0

Great looking, it works perfectly, I tried to install oreo but it does not work, it always returns to 7.0 and 5.1. At least I managed to redirect the cell. But for the oreo version I think I have to wait because I've tried many but no one works.

I used this on top of the MidgarD ROM I had, now I have a normal 4.5G AND a working face unlock. On Stock ROM, I didn't have the option for the face unlock, and when I installed Elemental ROM and later MidgarD ROM, it didn't work on both of those. This is interesting, isn't it?
I also didn't immediately lose my installed apps, by which I mean until I unlocked the bootloader again.
Bad news: Despite installing Magisk and enabling Magisk Hide after this, I fail the Safety Net check

Thanks man its working fine, my Mate 10 Lite was soft bricked or wont get proper hardware and face unlock, now it works
in start it was problematic for me, wifi would not turn on, phone will periodically show storage full (there was no SD Card in it)
then I restarted 2/3 times, and poof.
Now not only phone is back but it has oreo

Hi!
I tried this, downloaded the rne-l21c432b135 FullOTA from Firmware Finder and followed the instructions.
However, when it boots after finishing then my phone has turned into NEO-L21 and I am not able to get back to RNE-L21 without replacing the software with an older backup. It says also the unit is rooted (Huawei ID says so when I should enter my fingerprint) even though I have formatted the unit.
What am I doing wrong?
EDIT: Sorry, I had used the wrong file (there is one for the RNE-L01 and one for the RNE-L21) and that made all the difference, I am not back to stock!
Thank you so much for the help!

Hi,
Works for RNE-L01C432B135 perfect. I updated without any problem.
But because I don't want to stay with locked bootloader, I made all rooting procedure from the beginning.
That was easy too, because I have backups of every single details (important datas from internal storage, messages, programs and of course /data/hw_init folder, SuperSU-decyrpt)
Thanks again

vovan1982 said:
HwOTA for Huawei Mate 10 Lite​1. On the phone, make a backup of all data (since during the upgrade all data will be erased). This is an obligatory condition.
2. Unlock your bootloader: (There´s no way around it (unfortnuately), but after the procedure your device will be locked again, so don´t worry!). The device will make a factory reset, so once again, BACKUP your files!!!!!!!!!!
3. Enable ‘USB debugging’ and ‘OEM Unlock’ option from setting>developer option>. To enable Developer Options, go to About phone and tap the Build Number 7 times.
4. You must download three zip-archives with a full "Full OTA" firmware on which you want to flash (If you look through in the FF (FirmwareFinder), you see there are 4 archives for China and 3 for other locations. You must to download for the version what model and location you will have after the firmware);
5. Add the downloaded files to the folder "HWOTA\Update" and run the .cmd file, it will rename them automatically according to the template:
- update_data_full_public.zip to update_data_public.zip
- update_full_....zip to update_all_hw.zip
- update.zip don't rename
6. After run the universal batch file update.bat in the "HWOTA" folder, which will provide an opportunity to choose the required work option (change firmware/rebranding (change location)). FOLLOWING INSTRUCTIONS ON THE SCREEN OF THE MONITOR - the entire process is accompanied by prompts.
At the end of the process, everything should work fine... Be prepared, the bootloader will be locked after changing the location or firmware as a FullOTA.
7. If suddenly it turned out "bootloop" - go into the stock Recovery and make wipe.
PS: To change the firmware using the SD card, you need to create a folder "HWOTA" on the SD card and copy three firmware archives with the changed names (see above). In the batch file select item 1 "SDCard HWOTA directory"
HwOTA.zip
If you like my work, you can thank TeamMT PayPal
PPS: Sorry for my English!!!
Click to expand...
Click to collapse
You should probably add credit to @mankindtw as this is his script
And switch places of step 2 and 3

ante0 said:
You should probably add credit to @mankindtw as this is his script
And switch places of step 2 and 3
Click to expand...
Click to collapse
He refused to support the lite model. I re-wrote his script and improved it. I will not add it. He need to be more flexible.

vovan1982 said:
He refused to support the lite model. I re-wrote his script and improved it. I will not add it. He need to be more flexible.
Click to expand...
Click to collapse
Oh. Sorry!
Good job then

Where can I find HwOTA for Huawei Honor View10?

HI Guys
my current firmware is RNE-L21C185B110 but i can't find any FULL OTA firmware but only OTA MF (RNE-L21C185B142CUSTC185D001 this is the last available update).
My bootloader is unlocked, unrooted and without TRWP
How can I do to update to last firmware with HwOTA?

ok
To install the update of the B142 you do not necessarily have to use the HWOTA, you simply have to copy the DLOAD folder from the extracted RAR file to your SD, if your SD says that the file is very large ... format the SD to another type of Format..
Formatting a unit SD in exFAT
1. Double-click on Equipment.
2. Right-click on the flash drive or memory card, then select Format.
3. In the File System list, click exFAT.
4. Click on Start.
5. Click OK to begin the format.
After saving the DLOAD folder to the SD.
- Turn off your smartphone
- Now press the volume button up + Volume down + Power button at the same time, so that the update process starts automatically.
- This procedure takes 5 to 10 minutes to complete
- Automatically it will restart ... and you will have installed the update.
giangi64 said:
HI Guys
my current firmware is RNE-L21C185B110 but i can't find any FULL OTA firmware but only OTA MF (RNE-L21C185B142CUSTC185D001 this is the last available update).
My bootloader is unlocked, unrooted and without TRWP
How can I do to update to last firmware with HwOTA?
Click to expand...
Click to collapse

Great,
updated without any problem.
Thank you very much

You're welcome
At all times when I can help I will. Greetings and a pleasure to have contributed ...
giangi64 said:
Great,
updated without any problem.
Thank you very much
Click to expand...
Click to collapse

Hi, I use version l21c432b135 rne-without root,has anyone tried to make update oreo , at bla-l09c432 with firmware fiinder?

dyller said:
Hi, I use version l21c432b135 rne-without root,has anyone tried to make update oreo , at bla-l09c432 with firmware fiinder?
Click to expand...
Click to collapse
I have the same model of L21, the firmware finder doesn't find the update yet. I'm located in Slovenia, if that helps anyhow. Although today I received the April security update B135.

Honor 8 B360

Hello guys.
I have an Honor 8 on C432B360 and i recived a ota update on the phone a newer version b380 , but , i cant install it and i cant update it with dload because there is more than UPDATE.app file inside and i dont want to ruin / crash my phone , also on HiSuite , it doesnt recive any newer update! Can someone help me? Thanks

Hello,
Can you write the full installed firmware's name (FRD-etc.)? And is you phone a rebranded chinese model (FRD-AL00/AL10/DL00)/DL10)?
If you see B380 via OTA, why can't you update it directly (without dload method)? Did you try to download the "Full package" ("3 dots/options" icon on OTA page > "Download latest full package")?

Micdu70 said:
Hello,
Can you write the full installed firmware's name (FRD-etc.)? And is you phone a rebranded chinese model (FRD-AL00/AL10/DL00)/DL10)?
If you see B380 via OTA, why can't you update it directly (without dload method)? Did you try to download the "Full package" ("3 dots/options" icon on OTA page > "Download latest full package")?
Click to expand...
Click to collapse
FRD-L09 C432
Cant update via OTA Emui installer (Update package failed)

You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
https://mega.nz/#!iUNmUCTA!LEvm8szdERS3DdOEyq9oGDl9Tbxi9gUzVDoaerAthcg
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:

Micdu70 said:
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Click to expand...
Click to collapse
Thanks mate repeated steps 3,4 5 and now im gonna lock the bootloader ! Thanks !
Mod: Make thread closed or something it was been fixed thanks to this guy ! :highfive:

Update giving some crashes let me look into into some time

Micdu70 said:
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Click to expand...
Click to collapse
something is wrong with this. missing apps. crashes and lags.

Niiko_x8 said:
something is wrong with this. missing apps. crashes and lags.
Click to expand...
Click to collapse
Factory Reset should fix everything. :good:

Micdu70 said:
Factory Reset should fix everything. :good:
Click to expand...
Click to collapse
it doesnt. missing apps crashes , formated , restored , nathing rom problem maybe