Database Info

Help me >>> my phone honor 6 h60 l04 is did

When I turn it does not give me anything ... just a slogan Huawei is not related to the computer what to do ... helped me please,

40 viewers
40 VIEWERS AND NO ANSWERS:crying::crying::crying::crying:

What did you do to obtain that ?
* rom update ?
* modify any system file ?
* root with an "exotic" tool ?
PS:
your bootloader is unlocked ?
before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ?
have you tried to flash the rom ?

THANX
at the first
1- What did you do to obtain that?>>>>>>. rom update
2- your bootloader is unlocked ?>>>>>>>>>> yes
3- before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ? >>>>>>>>> i cant remember i thank b370
4- have you tried to flash the rom ? >>>>>>> yes i tired
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can

TRANSMITAR said:
at the first
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can
Click to expand...
Click to collapse
A bit difficult to figure out what happend. Did you have the abd driver on computer? did you hold the buttons to goto the bootloader? One thing is sure your phone is atill alive.
-

ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only

TRANSMITAR said:
ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only
Click to expand...
Click to collapse
Try to hold Vol+ and start see if you can get into the bootloader.
.

1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)

cheptii said:
1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
Click to expand...
Click to collapse
after step no : 3 adb give me it photo >>>> my mobile is cant connect to my pc

you need to go to the fastboot in the phone

HOW ?

help me pleas

ithank it soft brack

Turn off the phone then Plug it and hold on Volume -

cheptii said:
Turn off the phone then Plug it and hold on Volume -
Click to expand...
Click to collapse
thank you

TRANSMITAR said:
thank you
Click to expand...
Click to collapse
, Keep me in touch

[GUIDE][NOUGAT]How to go back from Custom Rom to EMUI

Here's a guide for how to go back from a Custom Rom (fe. RROS) back to EMUI. I went through the same process successfully.
IMPORTANT: This is ONLY for Nougat!! You can neither rollback from Project Treble Rom using this guide nor from any other Oreo Rom in the future.
1. Download the file for your device from the following thread:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892 and unpack the rar file.
2. You'll get a dload folder. Copy the entire folder to the root of your SD card.
3. Power off your phone and boot it into dload (Volume down + Volume up + Power)
4. After it finished installing this first file, interrupt the startup and boot into recovery (hold Volume up + Power until it forcibly reboots).
5. Do a factory reset and wipe cache.
6. Remove the SD card from the phone and do the following steps on your PC (you can let the phone sit in Recovery while doing that):
6a. Go into /dload/ folder of the SD card and remove update.app.
6b. Go into the other folder in /dload/ and move its .app file into /dload/
6c. Rename this .app file into update.app
6d. Eject the SD card from your PC and insert it in your phone again.
7. Hold Volume down and Volume up while tapping Reboot.
8. It should start the second installation in dload mode, let it install, reboot and you're done
Thanks to 5261979 for providing the files! If this guide worked for you, please give a Thanks to their post too!

yz8_1337 said:
Hello, the downloadlinks from the linked thread are down, is there any other way to get the firmware files?
Click to expand...
Click to collapse
Download Firmware Finder for Huawei:
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
You should be able to get the files of any firmware. Probably you're even able to go back from an Oreo custom rom to EMUI 8 but I haven't tested that. However I don't recommend installing firmware files from a different Android version than the one of your current custom rom.
Edit: First file to install is the firmware, second is vendor (Nougat).
Doing it on Oreo, second step might not be necessary since it's Project Treble.
Also, as I said, I'm NOT sure if this works exactly in that way on Oreo.
Sent from my Honor 9 using XDA Labs

yz8_1337 said:
Okay, thanks alot for your kind response!
---------- Post added at 02:18 PM ---------- Previous post was at 02:07 PM ----------
One more question: the oldest version I can get using this firmware finder app is B160. In the thread you linked, B130 was mentioned. Does it make any difference when im on RROS 5.8.5 currently and want to go back?
Edit: I was searching firmwares for STF-L09S and not STF-L09 but I still wonder if it makes any difference which version I use for the dload method as long as its Nougat
Click to expand...
Click to collapse
It most likely won't make a difference which Nougat version you install. The only thing is that there are several versions where capacitive buttons and flashlight breaks when unlocking the bootloader or/and rooting it. Same with Oreo firmwares but for Oreo there is a fix.
And about the S version, I'm sorry I don't know the difference myself. :/ I actually just made this guide because I wanted to help others with my way of going back to Stock as I didn't find any guides specifically on that when I did it myself.
Sent from my Honor 9 using XDA Labs

_lucx_ said:
Here's a guide for how to go back from a Custom Rom (fe. RROS) back to EMUI. I went through the same process successfully.
IMPORTANT: This is ONLY for Nougat!! You can neither rollback from Project Treble Rom using this guide nor from any other Oreo Rom in the future.
1. Download the file for your device from the following thread:
https://forum.xda-developers.com/honor-9/development/firmware-huawei-honor-9-stf-l09-stock-t3696892 and unpack the rar file.
2. You'll get a dload folder. Copy the entire folder to the root of your SD card.
3. Power off your phone and boot it into dload (Volume down + Volume up + Power)
4. After it finished installing this first file, interrupt the startup and boot into recovery (hold Volume up + Power until it forcibly reboots).
5. Do a factory reset and wipe cache.
6. Remove the SD card from the phone and do the following steps on your PC (you can let the phone sit in Recovery while doing that):
6a. Go into /dload/ folder of the SD card and remove update.app.
6b. Go into the other folder in /dload/ and move its .app file into /dload/
6c. Rename this .app file into update.app
6d. Eject the SD card from your PC and insert it in your phone again.
7. Hold Volume down and Volume up while tapping Reboot.
8. It should start the second installation in dload mode, let it install, reboot and you're done
Thanks to 5261979 for providing the files! If this guide worked for you, please give a Thanks to their post too!
Click to expand...
Click to collapse
hello sir,
i have followed all the steps, tryed different update.app nothing, error cant install, just starting the emui rollback process it arrives 5% and stops. im stuck no os installed, just twrp 3.1.1.1. please help me
sincerely

xenini said:
hello sir,
i have followed all the steps, tryed different update.app nothing, error cant install, just starting the emui rollback process it arrives 5% and stops. im stuck no os installed, just twrp 3.1.1.1. please help me
sincerely
Click to expand...
Click to collapse
Which firmware were you previously on and which one did you try to install?
Sent from my Honor 9 using XDA Labs

Honor 8 B360

Hello guys.
I have an Honor 8 on C432B360 and i recived a ota update on the phone a newer version b380 , but , i cant install it and i cant update it with dload because there is more than UPDATE.app file inside and i dont want to ruin / crash my phone , also on HiSuite , it doesnt recive any newer update! Can someone help me? Thanks

Hello,
Can you write the full installed firmware's name (FRD-etc.)? And is you phone a rebranded chinese model (FRD-AL00/AL10/DL00)/DL10)?
If you see B380 via OTA, why can't you update it directly (without dload method)? Did you try to download the "Full package" ("3 dots/options" icon on OTA page > "Download latest full package")?

Micdu70 said:
Hello,
Can you write the full installed firmware's name (FRD-etc.)? And is you phone a rebranded chinese model (FRD-AL00/AL10/DL00)/DL10)?
If you see B380 via OTA, why can't you update it directly (without dload method)? Did you try to download the "Full package" ("3 dots/options" icon on OTA page > "Download latest full package")?
Click to expand...
Click to collapse
FRD-L09 C432
Cant update via OTA Emui installer (Update package failed)

You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
https://mega.nz/#!iUNmUCTA!LEvm8szdERS3DdOEyq9oGDl9Tbxi9gUzVDoaerAthcg
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:

Micdu70 said:
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Click to expand...
Click to collapse
Thanks mate repeated steps 3,4 5 and now im gonna lock the bootloader ! Thanks !
Mod: Make thread closed or something it was been fixed thanks to this guy ! :highfive:

Update giving some crashes let me look into into some time

Micdu70 said:
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Click to expand...
Click to collapse
something is wrong with this. missing apps. crashes and lags.

Niiko_x8 said:
something is wrong with this. missing apps. crashes and lags.
Click to expand...
Click to collapse
Factory Reset should fix everything. :good:

Micdu70 said:
Factory Reset should fix everything. :good:
Click to expand...
Click to collapse
it doesnt. missing apps crashes , formated , restored , nathing rom problem maybe

Honor 8 update

Hello guys. I have a Honor 8 (Al-C900B120 version) how run Android 6.0 with EMUI 4.1. I want to update it to Android 7 and EMUI 5 or more but i don.t find the pack with update because my phone don.t want to riceve it. Can somebaby help me to solve this think and let here a link .
Tnk !

Hello! Do you already tried to install and use HiSuite software on your computer to get an update?

Micdu70 said:
Hello! Do you already tried to install and use HiSuite software on your computer to get an update?
Click to expand...
Click to collapse
Yes but nothing

Iosifcosmin said:
Yes but nothing
Click to expand...
Click to collapse
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
if i do this , in the chines version the google play will be work ?

Iosifcosmin said:
if i do this , in the chines version the google play will be work ?
Click to expand...
Click to collapse
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).

Micdu70 said:
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).
Click to expand...
Click to collapse
My phone is Al-10

Iosifcosmin said:
My phone is Al-10
Click to expand...
Click to collapse
EDIT: Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info". If you see "Vendor: all" and "Country: cn" = OK you can follow:
EDIT 2: If you see "allwyf" in vendor info, tell me and I will give you the good zip files!
Try to flash FRD-AL10C00B396 - "all-cn" vendor - January 2018 security patches included, via dload method. But there is 3 files to flash (in order!):
0) Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop.
/!\ It's better to use a SD Card, don't know if it works if you send files into Internal Storage! /!\
First flash: update.zip
1) Unzip archive, create "dload" folder inside root of SD Card memory if not present -or- delete "dload" content if exists, then transfer extracted file named "UPDATE.APP" inside "dload" directory.
2) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3) First Boot can take some minutes, wait patiently...
Second flash: update_full_FRD-AL10_all_cn.zip
4) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
5) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
6) And... Boot again... ^^
Third flash: update_data_full_public.zip
7) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
8) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
9) All files were flashed! OTA update will not give you updates because it's the latest OTA update (currently)...
10) If any issue, Factory Reset can help.

Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
i follow your steps but when i turn on my phone (press up and down key + power key) the update stop at 5% and it stuck.... and after that it turn . What can i do to work the update?

What do you see/have when you do this:
Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info".
?

[Official Firmware] [Emui 9.1.1 for HKL-AL00] [Dload Method]

This thread is for the HKL-AL00 so everything is in the same Place.
All Firmware are working with Dload Method.(Backup your Data dload Methode delete all!)
All files are located on a fast server (Google Drive)
Guide for dload Method in 2. Post
Downloads:
HKL AL10 9.1.1.128
HKL AL10 9.1.1.131​​

Guide for dload Method
Instructions for the dload Method
You need Micro SD Card or OTG Stick Typ C
At least 30% Battery Level!
Normal Upgrade
1. Download Update Package and Unzip it.
2. Copy the dload folder to the root directory of the Memory Card or OTG Stick.
3. Launch Phone Dialer app and dial *#*#2846579#*#* > ProjectMenu > Software Upgrade > SDCard Upgrade > OK.
4. Now the installation Process starts on your Device.
5. Once done, the Phone automatically restarts into latest Stock Firmware.
Force Upgrade
1. Copy the dload folder to the root directory of the Memory Card,OTG Stick.
2. Turn off your Phone.
3. Next, you need to press Volume Up + Volume Down + Power Button simultaneously for 6-8 seconds.
4. Once the Update Process starts, release the Hardware Buttons and wait 5-10 Minutes till the Process is Completed.
5. On a successful finish, the Device will automatically Reboot and you’re all set to enjoy the new Firmware on your Huawei/Honor EMUI/Magic Smartphone
That’s the simple Guide to Update your Huawei/Honor Phone to the latest Version.​