Related
When I turn it does not give me anything ... just a slogan Huawei is not related to the computer what to do ... helped me please,
40 viewers
40 VIEWERS AND NO ANSWERS:crying::crying::crying::crying:
What did you do to obtain that ?
* rom update ?
* modify any system file ?
* root with an "exotic" tool ?
PS:
your bootloader is unlocked ?
before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ?
have you tried to flash the rom ?
THANX
at the first
1- What did you do to obtain that?>>>>>>. rom update
2- your bootloader is unlocked ?>>>>>>>>>> yes
3- before the crash what was your rev Bxxx (for ex: B370 B391 B520...) ? >>>>>>>>> i cant remember i thank b370
4- have you tried to flash the rom ? >>>>>>> yes i tired
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can
TRANSMITAR said:
at the first
finely >> my phone when i switch on i see logo honor only when i connected usb in the my pc No Response and Do not read .
please help me if you can
Click to expand...
Click to collapse
A bit difficult to figure out what happend. Did you have the abd driver on computer? did you hold the buttons to goto the bootloader? One thing is sure your phone is atill alive.
-
ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only
TRANSMITAR said:
ican see bootloader on my mobile when switch on only logo honor
and when i press hold on + &-& power screen give me logo honor only
Click to expand...
Click to collapse
Try to hold Vol+ and start see if you can get into the bootloader.
.
1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
cheptii said:
1- Download the multi-tool & Huawei update extractor
2- Download the B370 & B309 Downgrade packet from http://www.hihonor.com/fr/pages/support#?view=downloads
3- Open Huawei update extractor and extract BOOT& CUST & RECOVERY & SYSTEM and copy them to the Folder 'Unbrick' in the multi-tool folder
4- Open the multi-tool and and go to the fastboot in your phone , then follow the steps in multi-tool for the unbrick (-6 Unbrick)
5-When its done , dont turn off the phone download BOOT & RECOVERY from this link LINK (hxxps://drive.google.com/file/d/0BzujZI5OEVIRWWxyLXNjRGNWb3c/view?usp=sharing
replace xx with tt)
6- Extract the files in a folder then Shift + right click and open cmd in the folder then Type ' fastboot flash boot boot.img' after that type fastboot flash recovery recovery.img
7- Turn off the phone and PUT B309 UPDATE.APP in dload folder in SD CARD
8- BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED , When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient)
9- PUT B370 UPDATE.APP (Extract it again , the 1st one will be missing some data) dload folder in SD CARD and BOOT device with 3buttons UNPLUGGED from USB and SD card UNMOUNTED When you get installation screen MOUNT SD card As Far As Possible (sometimes it takes 3 or 4 tries to access the setup via the 3 buttons so be patient) (AGAIN)
Click to expand...
Click to collapse
after step no : 3 adb give me it photo >>>> my mobile is cant connect to my pc
you need to go to the fastboot in the phone
HOW ?
help me pleas
ithank it soft brack
Turn off the phone then Plug it and hold on Volume -
cheptii said:
Turn off the phone then Plug it and hold on Volume -
Click to expand...
Click to collapse
thank you
TRANSMITAR said:
thank you
Click to expand...
Click to collapse
, Keep me in touch
Hi i have an Honor8 and it's kinda destoryed
Problem :
1 Phone is stuck honor 8 logo or it show me the EMUI Huawei eReocover where i have three options A) shutdown B) reboot C) Download latest Version and recovery [ tried options C But i fails to download the package everytime ]
2: my honor 8 is usb dead meaning my pc dosent recognize my phone in anyway so.... yeah
3: Dont have stock Rom or custom rom
4: cant boot to twrp recovery at all
Good news at this point :
The Power and volume bottoms work ..........
Oh and i have Mrico SD card .........
IF you can solve this Problem you my friend are a certify genuineness
Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
are you saying that i should download the Frimeware to the miroc sd and press + - and power toghther i ll try that
and i cant boot to twrp to flash the zip
the for the replay i'll report after i try it
Rommco05 said:
Put full fw to sd card and turn on phone with buttons +/-/on,off together or flash .zip fw via twrp
Click to expand...
Click to collapse
I tried it but it said the the uppdate pakage dosent exist
Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.
Rommco05 said:
You have all ready fw in sdcard? Go to Huawei web download full firmware B131 and copy this file to sdcard
Click to expand...
Click to collapse
Yes i have Frimeware in my sdcard what know?
PhantonKid said:
Yes i have Frimeware in my sdcard what know?
Click to expand...
Click to collapse
press volume up, down and power when you start the phone. The firmware (UPDATE.APP) should be in a folder called dload and it should install.
Solved it guys thx for all the Help
it work omg so happy dint have i phone for tre days
download the Frimeware
Extart it
made new fold named dload
put the Uppdare.app in dload
power voulme + and -
and magic it works
you are all certify genuineness
StratOS_HTC said:
Use Method 2
How to install Nougat Firmware on Honor 8 –
Method 1
1) First, download Android 7.0 Nougat ROM for Honor 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now dial *#*#2846579#*#* from your phone dialer to open a hidden menu.
4) Now click on Project Menu -> Software Upgrade -> SDCard Upgrade.
5) Now select and run the update.
6) Wait until the installation process is complete and then reboot your device.
7) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
8) Now repeat step 3 to 6 again.
9) Done.
Method 2
1) Download Stock ROM for Huawei and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3) Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process.
6) Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
7) Now repeat step 3 to 5 again.
8) Done.
Click to expand...
Click to collapse
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??
PhantonKid said:
I dont understand step six Now extract the second file (update_data_full_hw_eu) from above and save all the files in the dload folder.
what second file ??
Click to expand...
Click to collapse
The file named "Update_data_full_hw_(insert your region here).ZIP" It's a US, EU or Asia specific file you should flash as well. It include soft keyboard and other useful stuff.
Place ALL of its contents in the dload folder when flashing.
Folks,
I recently bought a Honor 8 and was trying to unlock the bootloder, install twrp and supersu by following the link below
https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-install-twrp-t3554789
As stated in the link above, I got to the steps to install supersu. However, on following step 12, it has formatted the data and now the phone is in a bootloop(stuck on the blue screen showing HONOR label)
I'm guessing my phone will not boot up since the OS has been erased. Could someone please help me restore this phone to back to the stock firmware and steps needed to do so. I am new to Honor phones, so not sure what I need to do and steps needed. Would appreciate any help if possible??
1. Boot into TWRP
2. Once there, when asked to keep system read only? - swipe to allow modifications
3. Tap Install
4. Tap Select Storage - Select your SD card
5. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
6. Swipe to confirm flash
7. Ignore the multiple errors: "Failed to mount '/data' (Invalid argument)
8. Go back to the main menu
9. Select Reboot to Recovery
10. When asked to keep system read only? - swiped to allow modifications (again)
11. Tap Wipe
12. Tap Format Data
13. Type YES then hit enter
14. It will format data using make_ext4fs..
15. When finished, tap Reboot System
16. Reboot back into TWRP
17. Swipe to allow modifications (You can check the box to never show this again)
18. Tap Install
19. Select storage
20. Select your SD card
21. Select the supersu file "SuperSU-v2.79-201612051815-EMUI5.0.zip"
22. Swipe to confirm flash
23. You should see NO ERRORS now when installing SuperSU
24. Wipe cache/dalvik
25. Swipe to wipe
26. Reboot system
Download the rollback and marshmallow firmware package from honors website. Rename the rollback package to "UPDATE.APP" and place it in a folder called "dload" in your micro SD card. Put the micro SD in your phone, and boot into the firmware update screen (volume up + volume down + power all at the same time). Once it's done, delete the old UPDATE.APP file from the dload folder, rename your marshmallow firmware package to "UPDATE.APP", place it in the dload folder on your micro SD card, place the micro SD in your phone, and again flash the firmware using volume up +volume down +power
Since you still have access to the SD Card via USB, you can just download your firmware, extract it and put the UPDATE.APP in a dload folder on a microSD card and press all 3 buttons when starting up the phone to start installing the OS again.
Appreciate the feedback. I tried going to the below website to pick up the rollback package and the firmware( Android 6.0)
http://www.hihonor.com/us/support/search-result/index.html?keywords=Honor%208%20Firmware
My question is that is it possible to just restore it back to android nougat(7.0) in the U.S or has the 7.0 not released for the U.S markets yet?
I found the following link below for the Android 7.0(Nougat) firmware for Honor 8 but not sure if this work on the phones bought in the U.S
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Appreciate your feedback on this..
Since the phone is in bootloop, I would have to use a different phone and it's SD card slot to download the firmware and then put it on the Honor 8. I'm guessing the rollback process would only apply if I wanted to go back to the Marshmellow firmware. My question though is would I be able to restore it back to Android Nougat(7.0) if possible.
I found the following link below for the Nougat(7.0) firmware. Not sure if this will work on the U.S phones. Is there a different process to restore it back to Nougat?
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
You can try just getting the nougat firmware onto your micro SD, then pressing volume up + volume down + power to see if it works. Worse case scenario is that you'll get an error.
If you do get an error, your can try the rollback procedure. Once you get marshmallow running you can always just update back to nougat with OTA.
Oh yeah, you don't necessarily need another phone. Just get a micro SD card adapter and plug it into your computer, then transfer the files into the dload folder
---------- Post added at 07:37 PM ---------- Previous post was at 07:34 PM ----------
You can use the following link for marshmallow firmware. Again, you can always update to nougat later using OTA
https://forum.xda-developers.com/honor-8/development/models-stock-firmware-packages-honor-8-t3501942
thanks for the info..just another clarification. The nougat firmware I found online was a zip file that included 3 files(attached snapshot) . I noticed one of the files is the UPDATE.APP.
My question is on creating the new dload folder do I need to remove the other two files or just copy all of 3 files in the dload folder before I try to restore the phone back.. Sorry if it's a straight-forward question, but I just want to make sure I'm doing this right.
Much thanks...
Just the UPDATE.APP
What are the other 2 files? Just curious
there is a folder called : META-INF which has some files in it and also a file called: full_mainpkg.tag which is only a 1KB file so maybe that's inconsequential.
Did you try out the procedure yet? The META-INF folder should not be necessary. You can always try the method with and without the folder included if you really need to.
I did...it did do the update following the steps you mentioned and it seems everything went fine as far as the update is concerned. I didn't get any errors, but once the phone rebooted it is still stuck on the blue screen with the Honor logo on it
Have you tried the rollback procedure as well?
---------- Post added at 04:16 AM ---------- Previous post was at 04:08 AM ----------
If neither procedure worked, you can try another procedure which involves extracting SYSTEM.IMG, BOOT.IMG, RECOVERY.IMG, and CUST.IMG from the UPDATE.APP file, then flashing all of them through fastboot, and finally preforming the rollback procedure again.
was finally able to get the phone to reboot and load the firmware. It does seem that there is some issue with the keyboard now as it's only showing OK google as the keyboard so I don't have a keyboard anymore. Not sure how to go around this. Also the phone seems a little laggy and unresponsive at times which wasn't happening earlier. I'm thinking of trying the rollback method to see if that helps or improves the performance of the phone. Let me know of you have any suggestions. Thanks again for your help...
That's a known issue with the keyboard. For some reason it does not function correctly after a factory reset. The rollback should fix everything. Once you are back on marshmallow, just update back to nougat (if you want to) through OTA system update.
Edit: it might actually be easier to just perform a factory reset on the nougat firmware. I'm assuming your data was wiped through the procedure anyway, right?
I can do the rollback but I just realized that I have the 64GB version which is the FRD-L14
http://www.phonemore.com/huawei-honor-8/models/629
I'm not sure if there is a FRD-L14(64GB) variant of the MM firmware available anywhere. If so, I'm not aware of the link of the site to find it. Secondly, if I do install the FRD-L04(32GB) variant of the MM firmware would that create problems for the phone in upgrading and later trying to root and install custom ROM etc.
Much Thanks
The nougat firmware your flashed earlier, was it the L14 firmware? I would not flash a L04 firmware on a L14. Instead, you can probably flash the L14 nougat firmware (unless you already did) and then perform a factory reset
EDIT: Refer to this thread:
https://forum.xda-developers.com/honor-8/how-to/frd-l14-users-how-to-restore-downgrade-t3537433
The OP uploaded the correct L14 firmware files. Remember to first flash the rollback package, then the firmware.
the firmware I flashed earlier was the L14 firmware. I went to the link you mentioned above in your post. It's a little confusing as far as the exact steps that need to be followed as people seem to be adding/modifying steps. Would help if I could get a clear step process on how/what to follow.
Also, is it okay to flash the rollback package and then flash the nougat firmware package for L14 if I am currently on nougat(not fully functioning as mentioned in the posts above).
This link below from your reference thread has a few L14 firmware's. I had earlier picked up the first one from the list. Not sure if that's the correct one to flash..
http://hwmt.ru/oth/HWFF/info/view.php?find_model=FRD-L14
Thanks again...
The rollback package is only used if you're downgrading from nougat to marshmallow. Otherwise, you don't need it. Since you were having some issues after flashing the nougat firmware, I would recommend that you rollback, and then update to nougat afterwards. Here's a step by step:
1. Get an micro SD card. Create a folder on it called "dload"
2. Download the F14 rollback package from the following link:
http://download-c.huawei.com/download/downloadCenter?downloadId=92098&version=360320&siteCode=us-h
Extract the UPDATE.APP file, and place it into your dload folder. Pace the micro sd into your phone
3. With the phone shut off, press volume up + volume down + power to flash the UPDATE.APP. Once it's done, shut down your phone and remove the sd card
4. Download the F14 Marshmallow firmware from the following link:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1201/g88/v66294/f1/full/update.zip
Extract the UPDATE.APP, and replace the old UPDATE.APP in the dload folder with the new one you just downloaded.
5. Place the micro sd into your phone. Repeat the button combination to flash it. Once it's done, shut down your phone.
6. Press volume up + power to boot into system recovery. Wipe the phone's data from this screen.
7. Boot into the phone. Go to settings -> About
Check to see if the model# etc is correct. If it is not, complete step 8. Otherwise go to step 9:
8. Download the following file:
http://update.hicloud.com:8180/TDS/...94/f1/full/hw/usa/update_data_full_hw_usa.zip
Extract the UPDATE.APP, place it in the dload folder, and flash it.
9. Boot into the phone. If you want to update to nougat, do the following:
Go to your dialer, and type *#*#2432546#*#*
This will force your phone to check for updates.
Then go to Settings -> Updater to update to nougat
I did follow your steps, but my keyboard has now vanished when the set up screen appears. It only shows google voice and I'm having trouble setting up my phone. Has anyone had the same problem. What can I do to get my keyboard back?
Note: my phone is unrooted. Not sure if that makes a difference
Hello guys.
I have an Honor 8 on C432B360 and i recived a ota update on the phone a newer version b380 , but , i cant install it and i cant update it with dload because there is more than UPDATE.app file inside and i dont want to ruin / crash my phone , also on HiSuite , it doesnt recive any newer update! Can someone help me? Thanks
Hello,
Can you write the full installed firmware's name (FRD-etc.)? And is you phone a rebranded chinese model (FRD-AL00/AL10/DL00)/DL10)?
If you see B380 via OTA, why can't you update it directly (without dload method)? Did you try to download the "Full package" ("3 dots/options" icon on OTA page > "Download latest full package")?
Micdu70 said:
Hello,
Can you write the full installed firmware's name (FRD-etc.)? And is you phone a rebranded chinese model (FRD-AL00/AL10/DL00)/DL10)?
If you see B380 via OTA, why can't you update it directly (without dload method)? Did you try to download the "Full package" ("3 dots/options" icon on OTA page > "Download latest full package")?
Click to expand...
Click to collapse
FRD-L09 C432
Cant update via OTA Emui installer (Update package failed)
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
https://mega.nz/#!iUNmUCTA!LEvm8szdERS3DdOEyq9oGDl9Tbxi9gUzVDoaerAthcg
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Micdu70 said:
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Click to expand...
Click to collapse
Thanks mate repeated steps 3,4 5 and now im gonna lock the bootloader ! Thanks !
Mod: Make thread closed or something it was been fixed thanks to this guy ! :highfive:
Update giving some crashes let me look into into some time
Micdu70 said:
You can use dload method to flash B380 (2 zips/FullOTA package) without issue. I uploaded it on MEGA so here is the download link:
Step 1: Extract this archive. In "B380" folder you will have 2 archives (update.zip & update_data_full_hw_eu.zip)
Step 2: Extract update.zip. Create the dload folder in your memory card, then put all extracted files of update.zip in the dload folder.
Step 3: Turn off your phone.
Step 4: At the same time, press & hold "Vol. up" + "Vol. down" + "power" buttons, which will start the update process automatically.
Step 5: Wait for a few minutes, until it's done.
Step 6: Extract update_data_full_hw_eu.zip file. Remove everything inside dload folder then put all extracted files of update_data_full_hw_eu.zip in the dload folder.
Step 7: Finally, repeat steps 3,4 and 5. After that, you can remove everything inside dload folder again. ^^
I hope it will be okay for your phone! :fingers-crossed:
Click to expand...
Click to collapse
something is wrong with this. missing apps. crashes and lags.
Niiko_x8 said:
something is wrong with this. missing apps. crashes and lags.
Click to expand...
Click to collapse
Factory Reset should fix everything. :good:
Micdu70 said:
Factory Reset should fix everything. :good:
Click to expand...
Click to collapse
it doesnt. missing apps crashes , formated , restored , nathing rom problem maybe
Hello guys. I have a Honor 8 (Al-C900B120 version) how run Android 6.0 with EMUI 4.1. I want to update it to Android 7 and EMUI 5 or more but i don.t find the pack with update because my phone don.t want to riceve it. Can somebaby help me to solve this think and let here a link .
Tnk !
Hello! Do you already tried to install and use HiSuite software on your computer to get an update?
Micdu70 said:
Hello! Do you already tried to install and use HiSuite software on your computer to get an update?
Click to expand...
Click to collapse
Yes but nothing
Iosifcosmin said:
Yes but nothing
Click to expand...
Click to collapse
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
if i do this , in the chines version the google play will be work ?
Iosifcosmin said:
if i do this , in the chines version the google play will be work ?
Click to expand...
Click to collapse
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).
Micdu70 said:
I don't know why it will can not work. It could be not pre-installed but you can install (and use) "Google services" APKs easily. (Don't forget to allow "Storage" permission / give full permissions)
Total size of the firmware given above is 5.29 GB (!!!) and you need to use "7-zip" to extract .tar.gz archive inside "Soft..." or "...Soft" folder. Extract archive again until you have "dload" folder which have "UPDATE.APP" file and 5 directories.
If I knew your phone model (AL00 or AL10?), I can try to give you the last firmware allowed to install on your phone (the "FullOTA" one - complete package firmware).
Click to expand...
Click to collapse
My phone is Al-10
Iosifcosmin said:
My phone is Al-10
Click to expand...
Click to collapse
EDIT: Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info". If you see "Vendor: all" and "Country: cn" = OK you can follow:
EDIT 2: If you see "allwyf" in vendor info, tell me and I will give you the good zip files!
Try to flash FRD-AL10C00B396 - "all-cn" vendor - January 2018 security patches included, via dload method. But there is 3 files to flash (in order!):
0) Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop.
/!\ It's better to use a SD Card, don't know if it works if you send files into Internal Storage! /!\
First flash: update.zip
1) Unzip archive, create "dload" folder inside root of SD Card memory if not present -or- delete "dload" content if exists, then transfer extracted file named "UPDATE.APP" inside "dload" directory.
2) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3) First Boot can take some minutes, wait patiently...
Second flash: update_full_FRD-AL10_all_cn.zip
4) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
5) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
6) And... Boot again... ^^
Third flash: update_data_full_public.zip
7) Unzip archive and transfer extracted file named "UPDATE.APP" inside "dload" directory. (click "Yes" for erasing previous file)
8) Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
9) All files were flashed! OTA update will not give you updates because it's the latest OTA update (currently)...
10) If any issue, Factory Reset can help.
Micdu70 said:
Okay... you have a "Rollback package" (C900 = free region). So now, you need to flash a complete firmware. It's easy with "dload" folder method.
Honor Chinese website doesn't give any firmware for Honor 8 now... I found B135 (Android 6.0 and EMUI 4.1 but you can do OTA updates, so it's good ) which will flash correctly on your phone and here is a link: https://mega.nz/#!ZgU22BYa!FP8UYXghy0dXxOYFeSf4BKdlF5_8AbVMKQ0ONkV5VpQ (It's for AL10 AND AL00 too, no worry!)
Steps for "dload" folder method:
0. Backup your phone! Factory Reset (Wipe internal storage only) can be made after update or needed if you have freezes/crashes/bootloop
1. Unzip firmware and copy dload folder to the phone (check if you have "dload/update.app" file - in SD card it's always working, but you can try internal storage too)
2. Turn off phone, wait 10 sec.. Turn on phone by PRESSING BOTH (UP AND DOWN) VOLUME KEYS AND POWER KEY until emui screen, then release. The update installs automatically.
3. After long update, phone boot can be very slow (2-5 minutes) so wait patiently!
4. If successfully booted, check now if you have OTA updates. (you can delete the "dload" folder if all is okay then )
Click to expand...
Click to collapse
i follow your steps but when i turn on my phone (press up and down key + power key) the update stop at 5% and it stuck.... and after that it turn . What can i do to work the update?
What do you see/have when you do this:
Check your vendor info, type this phone number: *#*#2846579#*#* then go to "Network Information Query" > "Vendor Country Info".
?