Hey guys,
I have a headunit for a Honda Accord, running on Android 8, 4GB of RAM.
Here is a pic from the system information screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see, the unit doesn't have either a MTCD or MTCE designation, it only says "CSN2_10232018_152600".
It seems to display some weird values (temperatures?) in the next line.
Googling terms like "CSN2 android" or "CSN2 headunit" didn't bring up any results.
The unit was bought from Klyde.
Does anybody know what unit this is, where does it come from, where can I find firmware for it?
I have exactly the same MCU Version in my new PX5 4/32 GB android device in my mazda.
The brand name of the device is ZWNAV .
I bought it directly from an aliexpress seller. And I have no idea what that MCU means
It works very well and I have no problems but I would like to know some more about it.
So if anyone can brighten this up, I would be happy.
Just wanted to give you a link to the product: https://www.aliexpress.com/item/Autostereo-Android-8-4-32G-Car-DVD-Player-GPS-navigation-For-Mazada-5-Premacy-headunit-multimedia/32913733250.html
It looks like any other mtce-device but seems to have another mcu software.
I would like to know if I could flash another rom to this device to have more control over it.
NaviPR said:
Does anybody know what unit this is, where does it come from, where can I find firmware for it?
Click to expand...
Click to collapse
I have the same unit. If you need a firmware, I can send you a link to my google drive (not allowed to post links on xda yet). Also this device is being simply rooted in the way as MTCD/MTCE devices.
Looks like CSN2 will replace MTCD/MTCE platform.
---------- Post added at 11:40 AM ---------- Previous post was at 11:36 AM ----------
donny02 said:
I would like to know if I could flash another rom to this device to have more control over it.
Click to expand...
Click to collapse
The Chinese seller told me that it is not compatible with MTCD/MTCE and it is a completely different platform, the same was discussed on russian 4pda.ru
_yuzo_ said:
I have the same unit. If you need a firmware, I can send you a link to my google drive (not allowed to post links on xda yet). Also this device is being simply rooted in the way as MTCD/MTCE devices.
Click to expand...
Click to collapse
I need any factory firmware for this. Are the installation instructions the same as MTCD/MTCE systems?
Please send me a private message with the link.
Looks like CSN2 will replace MTCD/MTCE platform.
Click to expand...
Click to collapse
How do you know that?
What are the differences between the platforms?
If "CSN2" denotes the platform, then how to find out who is the manufacturer?
NaviPR said:
I need any factory firmware for this. Are the installation instructions the same as MTCD/MTCE systems?
Please send me a private message with the link.
Click to expand...
Click to collapse
Done, the inastallation logic is the same as for MTCD/MTCE.
NaviPR said:
How do you know that?
Click to expand...
Click to collapse
At least the seller says so...
NaviPR said:
What are the differences between the platforms?
If "CSN2" denotes the platform, then how to find out who is the manufacturer?
Click to expand...
Click to collapse
No idea, for now. The different sellers send these devices under different brands when you purchase PX5.
_yuzo_ said:
Done, the inastallation logic is the same as for MTCD/MTCE.
At least the seller says so...
No idea, for now. The different sellers send these devices under different brands when you purchase PX5.
Click to expand...
Click to collapse
There are rumors of new units that are starting to roll out of China that have some of the Android 8.0 issues fixed, mostly dealing with bluetooth and wifi hardware issues. Maybe these are those mystery units?
What version of Android did your CNS2 unit come with?
*edit
Never mind, I didn't read.
NaviPR said:
What version of Android did your CNS2 unit come with?
Click to expand...
Click to collapse
Android 8.0.0, Bluetooth and WiFi work well. At least my unit is OK.
Mine ist Android 8.0.0 too, bluetooth works perfectly and connects automatically to my android phone. WiFi ist weak as on every other device I had before. It does not connect to my home network even if it is near. I have to use a wifi repeater im my car to get it connected (xiaomi mi wifi repeater).
I own this CSN2 headunit too, have it installed in my 09 Toyota Camry.
I did not like it, software is not very good.
Default ES file explorer cant send files through WLAN. I updated it to latest version, but it says "connection lost". Every file I need to use a pendrive to put it inside the unit.
LED illumination does not work well, but I belive this is a specific problem of my unit.
In settings, display size, another issue. When set to "large", icons on main screen get messed up.
Searching now for some app that adjusts volume level according to GPS speed...
My other headunit is a RK3066 4core 1GB RAM, and I use an app that makes this job fine.
_yuzo_ said:
I have the same unit. If you need a firmware, I can send you a link to my google drive (not allowed to post links on xda yet). Also this device is being simply rooted in the way as MTCD/MTCE devices.
Looks like CSN2 will replace MTCD/MTCE platform.
---------- Post added at 11:40 AM ---------- Previous post was at 11:36 AM ----------
The Chinese seller told me that it is not compatible with MTCD/MTCE and it is a completely different platform, the same was discussed on russian 4pda.ru
Click to expand...
Click to collapse
No. They are simply different units than mtce.
Mtce is still alive...and evolving..
Different makers are moving to their respective strategy in terms of mcu. Perhaps the mtce marked was saturated and they (klyde) are building something by their own
Enviado desde mi SM-G950F mediante Tapatalk
---------- Post added at 04:34 PM ---------- Previous post was at 04:33 PM ----------
Hazard15301 said:
There are rumors of new units that are starting to roll out of China that have some of the Android 8.0 issues fixed, mostly dealing with bluetooth and wifi hardware issues. Maybe these are those mystery units?
What version of Android did your CNS2 unit come with?
*edit
Never mind, I didn't read.
Click to expand...
Click to collapse
No. Mtce units are still mtce but with new motherboards (dsp included ....etc) but no plans to move to new mcu by the moment
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
No. They are simply different units than mtce.
Mtce is still alive...and evolving..
Different makers are moving to their respective strategy in terms of mcu. Perhaps the mtce marked was saturated and they (klyde) are building something by their own
Click to expand...
Click to collapse
Yep, that is possible. In any case I got CSN2 unit from Aliexpress and I hope that some day it will have great custom ROMs too.
_yuzo_ said:
Yep, that is possible. In any case I got CSN2 unit from Aliexpress and I hope that some day it will have great custom ROMs too.
Click to expand...
Click to collapse
I just prefer buying things that were currently well supported.
It is not easy to introduce new products and get quickly a massive market....
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
I just prefer buying things that were currently well supported.
It is not easy to introduce new products and get quickly a massive market....
Click to expand...
Click to collapse
To be honest, I expected to get MTCD/MTCE unit as there were no info that PX5 could be different... I've just found the one with good hardware and price. I was a bit surprised to find CSN2 there
My headunit though has an MTCE_CSN on it. I wonder where can i find any updates sooner
Just be carefull with this seller on Aliexpress (ZWNAV), no support, fake product description, IPS screen mentionned whereas it is TFT screen!
RomainD2 said:
Just be carefull with this seller on Aliexpress (ZWNAV), no support, fake product description, IPS screen mentionned whereas it is TFT screen!
Click to expand...
Click to collapse
Yes, you're right... Not all Chinese sellers are transparent.
I'm disappointed with my CSN2 headunit, it emits a high-frequency noise even when there is no music or radio playing...
Poor software tecnology
---------- Post added at 03:35 PM ---------- Previous post was at 03:32 PM ----------
slidefriday said:
My headunit though has an MTCE_CSN on it. I wonder where can i find any updates sooner
Click to expand...
Click to collapse
Is there any way to root or install a custom firmware?
The built in firmware has a UI that is not easy to operate. There is no apps menu, all the apps are placed on the screens to the right, and are not sorted by name...
Is it possible to make a backup of the the factory firmware ROM?
---------- Post added at 03:59 PM ---------- Previous post was at 03:35 PM ----------
I tried to change display size, but the screen became completely messy...
I bought a pumpkin 8.0 which had CSN2. I returned it since I couldn't install Hal9k's ROM.
Now, I bought a Eonon unit from a seller in Hong Kong. Already installed Hal9k ROM and loving it.
The seller is superb responsive, they sent me an updated MCU file and the original stock ROM.
Great!
meazz, did you try to install this custom ROM on this csn2 unit? What did you get?
could you please send me these files?
Could you please show us the main interface?
Did anyone succeed to install it?
aecioms said:
Great!
meazz, did you try to install this custom ROM on this csn2 unit? What did you get?
could you please send me these files?
Could you please show us the main interface?
Did anyone succeed to install it?
Click to expand...
Click to collapse
I tried but it hung, that's when I looked into the MCU and it was CSN2.
Related
While I really love the new lollipop release with all my part there seem to be a bug relating to the sim card.
It happens a few times each day that the phone unmount/cant detect sim card.
What happens is that you can have the phone on your table then when you pic it up it will request for sim pin code.
This is a quite serious problem since I want to be able to reached 24/7
Some other person in the lollipop confirmed he had the same problem.
Both we and him seem to have the same problem and it happens when you toggle off mobile data.
Which I always do when I do not want any notifcations from IMs.
I hope there is any solution of this. Also could more people confirm they have the same problem ?
Yes I have the same problem. Mate 7 in the Netherlands. And its also confirmed on frandroid.
That same problem I have. Maybe huawei do it update to repair this bug. We must wait and see
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Good then we can confirm it is software related ( I was worried that it was hardware since I did just send mine back inf for service it turns out everything besides motherboard is new)
I suggest we spam the huawei support right now, cause this is a very important bug.
uptime and reachabilbity must be the priority number one... otherwise I am very very very very very happy with the lollipop update.
Have some one been figuring out how to avoid this bug and what exactly cause it how to replicate and avoid it ?
blackinfinity said:
While I really love the new lollipop release with all my part there seem to be a bug relating to the sim card.
It happens a few times each day that the phone unmount/cant detect sim card.
What happens is that you can have the phone on your table then when you pic it up it will request for sim pin code.
This is a quite serious problem since I want to be able to reached 24/7
Some other person in the lollipop confirmed he had the same problem.
Both we and him seem to have the same problem and it happens when you toggle off mobile data.
Which I always do when I do not want any notifcations from IMs.
I hope there is any solution of this. Also could more people confirm they have the same problem ?
Click to expand...
Click to collapse
Nop as usual I didnt have any kind of error like that bro...
Sent from my HUAWEI MT7-TL10 using XDA Free mobile app
I have the same problem, rolled back before I could try a solution that some say work.
Try disabling touch-disable mode. It's set to ON by default.
You can find it under 'Settings -> Smart Assistance -> More'
Please reply in thread with your experiences, working or not.
Sent from my HUAWEI MT7-L09 using Tapatalk
nollfemfemtre said:
I have the same problem, rolled back before I could try a solution that some say work.
Try disabling touch-disable mode. It's set to ON by default.
You can find it under 'Settings -> Smart Assistance -> More'
Please reply in thread with your experiences, working or not.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
what does this setting do if I might ask ?
blackinfinity said:
what does this setting do if I might ask ?
Click to expand...
Click to collapse
It's supposed to prevent accidental taps while the phone is in your pocket..
Have no clue why or how this can be a solution to our problem, however, it's been discussed in the forum and it helps some users.
Sent from my HUAWEI MT7-L09 using Tapatalk
It doesn't work. Was already off in my settings.
nollfemfemtre said:
It's supposed to prevent accidental taps while the phone is in your pocket..
Have no clue why or how this can be a solution to our problem, however, it's been discussed in the forum and it helps some users.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
I have disable this now and it had no impact for me unfortunately the bug is still present and have happened a few times already.
It seem to only happens when the phone is in sleep..so never when you are using the device.
pcootjes said:
It doesn't work. Was already off in my settings.
Click to expand...
Click to collapse
I think I should email huawei about this...
It's always happening when device is in sleep.
---------- Post added at 03:58 PM ---------- Previous post was at 03:30 PM ----------
What I dont understand is why some people have no problems. I have 2 mate 7 phones both have this problem. I am now trying with wifi off. Maybe that does the trick.
pcootjes said:
It's always happening when device is in sleep.
---------- Post added at 03:58 PM ---------- Previous post was at 03:30 PM ----------
What I dont understand is why some people have no problems. I have 2 mate 7 phones both have this problem. I am now trying with wifi off. Maybe that does the trick.
Click to expand...
Click to collapse
Not always it happen when screen is on sometimes too.
I have now emailed Huawei Sweden about this ****ing bug...
Lookily I am a period where I do not need to be reached 100% but normally I must be reachable 100% because of work related stuff..
blackinfinity said:
I have now emailed Huawei Sweden about this ****ing bug...
Lookily I am a period where I do not need to be reached 100% but normally I must be reachable 100% because of work related stuff..
Click to expand...
Click to collapse
u said u sold mate 7 and got LG ... why u back : ?
XDADEVX said:
u said u sold mate 7 and got LG ... why u back : ?
Click to expand...
Click to collapse
Just like my LG G2 did only hold 3 months my G3 hold only a few weeks, one fall at the ground was enough, LG devices is one of the most vulnerable devices for sure.. the digitizer stopped working.. . While I had my G3 I had sent in my Mate 7 to service. only a couple of days after I cracked the G3 screen I received the Mate again pretty good timinig, and the speed of Lollipop made me really like the device, it opened a new dimension for this device for sure
I hvae contacted huawei support now, They agreed it was a very serius bug and they would send the request higher up, I told them I have seen many people in forums have the same problem, by the reply I Got it seemed like the felt embarssed that a bug like this did even exist on a device like this... Indeed It is... bugs is one thing...but when the bugs
does mess with the fundamental functions of the devices such as reachabillity then it embarssing for ure.. Besides this serious bug I told them I was very impressed with the Lollipop update..
blackinfinity said:
I hvae contacted huawei support now, They agreed it was a very serius bug and they would send the request higher up, I told them I have seen many people in forums have the same problem, by the reply I Got it seemed like the felt embarssed that a bug like this did even exist on a device like this... Indeed It is... bugs is one thing...but when the bugs
does mess with the fundamental functions of the devices such as reachabillity then it embarssing for ure.. Besides this serious bug I told them I was very impressed with the Lollipop update..
Click to expand...
Click to collapse
U crazy .. u really don't know what u want like when child wanna new toys every day you messing and destroying all phones what you touch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did force stop this service... let' se if it gives any impact.. but I did figure that this service has nothing to do on the L09 version...maybe it does interfere in some unwanted way..
Unfortunately it is not possible to disable this one..but I have fore stopped it now and lets see if I get any more "enter sim pin"...
Still no solution? I have read that the old nexus 5 have had a similar problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It looks gorgeous, but the fp placement ruined it
I prefer the front fp placement because of unlocking from the table right away without lifting the phone. The Huawei phone with rear fp, will have on screen navigation keys (= less screen estate) as Huawei barely uses Capacitive ones. And i think this shape takes least space compared to the round iphone or on the meizu phone. So ease of use and maximum usage of front bottom bezel.
The best fp placement is on the side (in the power button)
CronaMell said:
The best fp placement is on the side (in the power button)
Click to expand...
Click to collapse
May be soeone from Huaweoli officials see these and consider such requirements based on the user input.
shashank1320 said:
May be soeone from Huaweoli officials see these and consider such requirements based on the user input.
Click to expand...
Click to collapse
Probably
CronaMell said:
The best fp placement is on the side (in the power button)
Click to expand...
Click to collapse
I prefer a onscreen finger print scanner.
kms108 said:
I prefer a onscreen finger print scanner.
Click to expand...
Click to collapse
You mean on the front?! (Like Samsung)
CronaMell said:
You mean on the front?! (Like Samsung)
Click to expand...
Click to collapse
no phone has it, but samsung is said to have it in the next phone, using the main screen as a scanner, just by touching the display.
kms108 said:
no phone has it, but samsung is said to have it in the next phone, using the main screen as a scanner, just by touching the display.
Click to expand...
Click to collapse
Ah, now I know what you mean.
I'm excited to see how it works, when the s8 is revealed
CronaMell said:
Ah, now I know what you mean.
I'm excited to see how it works, when the s8 is revealed
Click to expand...
Click to collapse
Just take it as a rumor.
kms108 said:
Just take it as a rumor.
Click to expand...
Click to collapse
All the best
---------- Post added at 12:17 PM ---------- Previous post was at 11:49 AM ----------
Unfortunately, it's only a 6x
CronaMell said:
All the best
---------- Post added at 12:17 PM ---------- Previous post was at 11:49 AM ----------
Unfortunately, it's only a 6x
Click to expand...
Click to collapse
6X launching during CES 2017 today..hope to see the similar as chinese variant.
shashank1320 said:
6X launching during CES 2017 today..hope to see the similar as chinese variant.
Click to expand...
Click to collapse
It will be the same, just read the article over at XDA
So you are saying the 6X is the international variation of the Magic, do you have a link to that information, if so it's best to hold off and get the X6, the Magic has so much crap in it.
kms108 said:
So you are saying the 6X is the international variation of the Magic, do you have a link to that information, if so it's best to hold off and get the X6, the Magic has so much crap in it.
Click to expand...
Click to collapse
They are totaly different. I said hope to get the same 6X as chinese variant means all 3 variants same in specs and no modifications to hardware or specs
shashank1320 said:
They are totaly different. I said hope to get the same as chinese variant means all 3 variants same in specs and no modifications to hardware or specs
Click to expand...
Click to collapse
Thanks for sorting this out, i'm going to china on the 8th, and hoping to pickup a Magic.
kms108 said:
Thanks for sorting this out, i'm going to china on the 8th, and hoping to pickup a Magic.
Click to expand...
Click to collapse
Make sure you get an unlocked version and see if setting up english language works for you as changing the system language is easy but apps still shows chinese. And also, you may need to work and put some effort in getting google work. ( no google framework or playstore).
Do check properly and get some hands on rather ordering online or checking a dummy handset.
shashank1320 said:
Make sure you get an unlocked version and see if setting up english language works for you as changing the system language is easy but apps still shows chinese. And also, you may need to work and put some effort in getting google work. ( no google framework or playstore)
Click to expand...
Click to collapse
Yep. I know about phones in china, no phones are locked in china, unless sold from dedicated carriers, but some carriers request a dedicated sim slot for there sim, but from the information in huawei's site, both slots is opened to all network, but one will be locked to 2G, if the other is using 3G or 4G.
and yes, play store is not available in china, it needs to be modded into the phone, some will work, whiles some don't, I'll just have to try, otherwise I will just have to side upload apk.
Thanks
kms108 said:
Yep. I know about phones in china, no phones are locked in china, unless sold from dedicated carriers, but some carriers request a dedicated sim slot for there sim, but from the information in huawei's site, both slots is opened to all network, but one will be locked to 2G, if the other is using 3G or 4G.
and yes, play store is not available in china, it needs to be modded into the phone, some will work, whiles some don't, I'll just have to try, otherwise I will just have to side upload apk.
Thanks
Click to expand...
Click to collapse
Yup. Do let me know if needed any help for google..i stuggled a lot with mine but fixed eventually. Some things work but contact sync issue was there but fixed somehow with older version apk.
Good luck bro
Hello, and apologies if this is the wrong section or topic etc beforehand.
Ok, my dilemma began after going on holiday and the s6 got splashed by sea water. The only help I got was a tub of rice from my Turkish compatriots. by the next day it was charging and working perfectly, but I had lost service and wifi.
when I returned home I did all the troubleshoots, mess around with network settings, and then the recovery settings delete cache, and in the end, the factory reset to no avail.
so my next step was to order 99.9% alcohol and give everything a soak and good clean, there was some minor corrosion under the hood, but this device has never been opened from new and everything looked like new, so hardly anything going on that looked damaged whatsoever. After piecing it all back together and switching the device back on, I'm still exactly the same everything working perfectly but no network or wifi?
I have exhausted all ideas and avenues and I'm now wondering if flashing the firmware or trying to downgrade might solve it in any way, the problem is I haven't flashed a device since my nexus 5 original.
It is currently factory reset to 7.0
Build:920FXXU6ERC9
Baseband:920FXXU6ERC2
Any ideas or help to get this back up and running would be amazing and appreciated greatly.
Im stuck,
Many thanks in advance
MM
Yes open it then brush it with a brush with alcohol
let its dry
u have to clean Motherboard & IC
it may work 80%
I made this tip always
foreiner said:
Yes open it then brush it with a brush with alcohol
let its dry
u have to clean Motherboard & IC
it may work 80%
I made this tip always
Click to expand...
Click to collapse
I already cleaned it all, connections the lot, motherboard,
not sure which bit IC is? but I pretty much cleaned it all over, I might strip it down and again tomorrow and target the wifi area again......
I'm seriously out of ideas, but everything else is working flawlessly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mighty__Mag said:
I already cleaned it all, connections the lot, motherboard,
not sure which bit IC is? but I pretty much cleaned it all over, I might strip it down and again tomorrow and target the wifi area again......
I'm seriously out of ideas, but everything else is working flawlessly
Click to expand...
Click to collapse
did you try to change the network cable its blue cable I think or black..... it may work with you
---------- Post added at 10:57 PM ---------- Previous post was at 10:44 PM ----------
Mighty__Mag said:
I already cleaned it all, connections the lot, motherboard,
not sure which bit IC is? but I pretty much cleaned it all over, I might strip it down and again tomorrow and target the wifi area again......
I'm seriously out of ideas, but everything else is working flawlessly
Click to expand...
Click to collapse
I already remove it from my phone but you I dont think you need to remove i think its for GPU so its okay just the network cable....
foreiner said:
did you try to change the network cable its blue cable I think or black..... it may work with you
Click to expand...
Click to collapse
are we talking about the cables near the bottom? Blue and Red ones?
Mighty__Mag said:
are we talking about the cables near the bottom? Blue and Red ones?
Click to expand...
Click to collapse
Yes they are
---------- Post added at 11:19 PM ---------- Previous post was at 11:16 PM ----------
Mighty__Mag said:
are we talking about the cables near the bottom? Blue and Red ones?
Click to expand...
Click to collapse
I think its the red one the blue I think its for fingerprint
cuz only one network cable should be...
foreiner said:
Yes they are
---------- Post added at 11:19 PM ---------- Previous post was at 11:16 PM ----------
I think its the red one the blue I think its for fingerprint
cuz only one network cable should be...
Click to expand...
Click to collapse
Am I replacing it or just cleaning it? and does this antenna act for both wifi and network signal, as its both connections that are failing, infact I think bluetooth is also a culprit, basically anything that uses frequency.
Many thanks for your solo efforts in supporting my issues,:good:
Mighty__Mag said:
Am I replacing it or just cleaning it? and does this antenna act for both wifi and network signal, as its both connections that are failing, infact I think bluetooth is also a culprit, basically anything that uses frequency.
Many thanks for your solo efforts in supporting my issues,:good:
Click to expand...
Click to collapse
if you could replace it .... its for signal network
wifi & blutooth I think they are near to camera IC u cleaned them already ...:good:
no need to thank bro no problem its my job in fact.....:laugh:
foreiner said:
if you could replace it .... its for signal network
wifi & blutooth I think they are near to camera IC u cleaned them already ...:good:
no need to thank bro no problem its my job in fact.....:laugh:
Click to expand...
Click to collapse
got both new wires today swapped them over and no change?
Mighty__Mag said:
got both new wires today swapped them over and no change?
Click to expand...
Click to collapse
ammmm,, Now i think Im useless for u bro..
foreiner said:
ammmm,, Now i think Im useless for u bro..
Click to expand...
Click to collapse
what about flashing if its a system bug ?
Mighty__Mag said:
what about flashing if its a system bug ?
Click to expand...
Click to collapse
Yes if its system bug its Done of course ............ well if its me I will NexusRom cuz drivers ...... to test it
foreiner said:
Yes if its system bug its Done of course ............ well if its me I will NexusRom cuz drivers ...... to test it
Click to expand...
Click to collapse
only other option is I have an s6 motherboard on eBay at 29.99, I know for certain everything else is fine LCD and other connections in my current device, would swapping my board to a used but tested from a trusted seller solve the wifi, network carrier and Bluetooth issues?
id basically be swapping a board with potential issues for one without, and just attaching my LCD and daughterboard over
[SIZE=+2]This thread has been created
for
Questions & Answers/Troubleshooting[/SIZE][SIZE=+2]Specific to[/SIZE]
Motorola One Vision
2019
Please feel free to share issues, questions and offer help. Noob questions are welcomed.
It is always best to use the Thanks button , in lieu of simply posting "Thank you".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please keep discussion focused, on questions pertaining to this Device
List of supporters...
...
...
...To those seeking help: Please don't bombard the supporters with PMs asking for help. Instead, ask your question here in the thread so others can benefit from the solution to your problem as well. If you want to be sure someone particular gets notified of your question, put his / her username directly after an @.
If you have ROM related questions, post in the relevant ROM Q&A thread (if there is one) or directly in the ROM development thread. Thank you!
Supporters: If you want to be put on or off the list, just make a request here in the thread!
Before posting anything, I strongly advise you to read
Forum Rules
[GUIDE] - XDA New User Guide - Getting started on XDA
XDA Tour
FAQs for Device Thread link
Index for Device Thread Link
Please look for a similar thread when visiting another device forum.
If you would like to create a [Help Thread] please Click Here.
I'm not planning on adding every Rom or Mod,
but if you have a suggestion for other links
Please post them here.
Please try post
Model #, software channel, and codename with your question
eg: XT1971-X, Retail, kane
See my Moto Flashing Guide
FAQs
UnLocking the Bootloader
ReLocking the Bootloader
[Fixing] Baseband <not found> / IMEI=0 / No Network After Flash / Issues
Fixing your Moto stuck in Qualcomm QHSUSB_Bulk or qloader mode
Using Lenovo's MOTO Smart Assistant to Update/Repair/Backup
Custom Roms/Recovery/Root/
Models
XT1970-1 Countries or regions available: Brazil.
XT1970-2 Countries or regions available: Latin America.
XT1970-3 Countries or regions available: United Arab Emirates, Europe, Various (International).
XT1970-5 P50 (6GB RAM + 128GB) China
Specs
https://www.phonemore.com/specs/motorola/one-vision/xt1970-3/
Firmware
https://forum.xda-developers.com/one-vision/how-to/xt1970-x-stock-firmware-share-thread-t3943516
https://mirrors.lolinet.com/firmware/moto/kane
Great
Thankful about the fact that there is movement in the forum. Love this phone. Greetings ?
So i want to remove the Google seachbar from start screen. I must install a 3rd party app to remove this like nova launcher ? Its not another way ?
RonHan said:
So i want to remove the Google seachbar from start screen. I must install a 3rd party app to remove this like nova launcher ? Its not another way ?
Click to expand...
Click to collapse
I suspect you will have to choose a different launcher like Nova.
Sent from my perry_f using XDA Labs
I am looking to buy the moto one vision or the samsung m40 .I am really into custom roms and have installed them on over 4 or 5 devices.As far as I know EXYNOS processors are hard to be exploited for custom roms to be developed as compared to their snapdragon competitors.So will custom roms be made for the one vision in the future.If not please suggest me a phone with punch hole under 350$ or 20000 rupees
Quick question, guys. Does the Vision show 'Turbo charging' when using the stock charger or just 'Charging'?
baunthiyal said:
Quick question, guys. Does the Vision show 'Turbo charging' when using the stock charger or just 'Charging'?
Click to expand...
Click to collapse
It shows "turbo charging" with both my stock turbo chargers for Moto Z2 Play and Motorola One Vision.
But with older normal charger it says just "Charging".
Am I the only one who's noticed that the touchscreens and especially the keyboard be comes quite a bit less responsive while the device is charging? Using original charger btw
SimDroid said:
It shows "turbo charging" with both my stock turbo chargers for Moto Z2 Play and Motorola One Vision.
But with older normal charger it says just "Charging".
Click to expand...
Click to collapse
Stock charger for Motorola One Vision does not show Turbo. Strange...
Guess I should get it checked?
PS - Other chargers work fine. Moto G4 Plus, for example.
---------- Post added at 06:10 PM ---------- Previous post was at 06:10 PM ----------
RomDevWannabe said:
Am I the only one who's noticed that the touchscreens and especially the keyboard be comes quite a bit less responsive while the device is charging? Using original charger btw
Click to expand...
Click to collapse
Did you remove the 'protective' layer over the screen?
baunthiyal said:
Stock charger for Motorola One Vision does not show Turbo. Strange...
Guess I should get it checked?
PS - Other chargers work fine. Moto G4 Plus, for example.
---------- Post added at 06:10 PM ---------- Previous post was at 06:10 PM ----------
Did you remove the 'protective' layer over the screen?
Click to expand...
Click to collapse
Yes and I bought a tempered glass screen cover and put it on
Same issue here but not only when it is charging. Apparently the display protection is the issue. Try removing and see if you do better.
Sent from my motorola one vision using Tapatalk
wieman01 said:
Same issue here but not only when it is charging. Apparently the display protection is the issue. Try removing and see if you do better.
Sent from my motorola one vision using Tapatalk
Click to expand...
Click to collapse
I removed the screen protection and now it seems to be more sensitive, however I do want to be able to use a tempered glass cover in the future to make the phone last longer. Do you think this could be solved either with a software update or by getting different brands of protectors?
RomDevWannabe said:
I removed the screen protection and now it seems to be more sensitive, however I do want to be able to use a tempered glass cover in the future to make the phone last longer. Do you think this could be solved either with a software update or by getting different brands of protectors?
Click to expand...
Click to collapse
This is hard to say, but yes, there is a chance others will fare better. I might replace mine soon.
Sent from my motorola one vision using Tapatalk
---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
SimDroid said:
It shows "turbo charging" with both my stock turbo chargers for Moto Z2 Play and Motorola One Vision.
But with older normal charger it says just "Charging".
Click to expand...
Click to collapse
Mine says 'Turbo Power Connected' when I use the Motorola charger.
Sent from my motorola one vision using Tapatalk
Hi guys , anyone one know if possible root this device ? Or if there any way to delete pre installed moto app?
AndresOrue said:
Hi guys , anyone one know if possible root this device ? Or if there any way to delete pre installed moto app?
Click to expand...
Click to collapse
Yes, you can root it. The best way appears to be via Magisk. Once rooted, you can remove unwanted apps. However, the auto-update function won't work anymore once the device is rooted. You will have to install any future updates through adb.
There are other downsides as well, hence I have decided against rooting for now.
Sent from my motorola one vision using Tapatalk
What can you say about the speaker? Isn't it too quiet? Can you hear the ringtone? How compared to the stereo in the Moto G7+?
My previous phone was 5,2', 16:9. The screen won't be too narrow for me?
wieman01 said:
Mine says 'Turbo Power Connected' when I use the Motorola charger.
Click to expand...
Click to collapse
I assume the one I got is indeed a bad charger. I have placed a complaint with the seller.
baunthiyal said:
I assume the one I got is indeed a bad charger. I have placed a complaint with the seller.
Click to expand...
Click to collapse
On the other hand faster charging will hurt the battery in the long run. I never turbo charge for this reason.
Sent from my motorola one vision using Tapatalk
wieman01 said:
Yes, you can root it. The best way appears to be via Magisk. Once rooted, you can remove unwanted apps. However, the auto-update function won't work anymore once the device is rooted. You will have to install any future updates through adb.
There are other downsides as well, hence I have decided against rooting for now.
Click to expand...
Click to collapse
Sorry to bother you but do you know where I can download a recovery for our device? ( twrp says not compatible )
Hello. I'm hoping to keep my unit as up to date as possible and wanted to ask if there any files compatible with my unit, and if possible, change the look of the ui too, because it looks super bland to me compared some of the ones I've seen online. I've only updated the firmware once when my seller gave me a file to fix the time issue I had when I first got the unit.
I currently have a Seicane unit for my accord 05.
The reason I'd like to update the mcu is in hopes that may be it'll help with displaying my climate controls. Maybe I'm off with that, but I'm still not able to figure out how to make it display on my screen.
I'm honestly sorry if this has been asked before, I just got overwhelmed with searching on my own in android auto, so I figured I'd ask directly.
Thank you guys.
What factory/mcu do you have. From that you can then decide options.
marchnz said:
What factory/mcu do you have. From that you can then decide options.
Click to expand...
Click to collapse
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
chewybits95 said:
I took a pic of my system specs.
If you're referring to the manufacturer, I believe it's HF, so I haven't really found much for this specific firmware and mcu. Doesn't seem to be as relevant here unfortunately.
Click to expand...
Click to collapse
snailium said:
Be aware, your head unit may randomly get black screen issue. My HF headunit with 3.0x MCU had that issue.
You need to get your MCU updated to 3.30. You can get the MCU update here: mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig
Sorry, I don't remember where I found the link. It must be one of the sound patch thread. Credits goes to cs-x who did the sound patch, and the original thread owner.
Click to expand...
Click to collapse
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
themissionimpossible said:
Hi, I have the same exactly Seicane head unit as @chewybits95 (same MCU version and date, same 9" display)
Did one of you succesfully update your MCU HF 3.07 to 3.30?
Thanks.
Click to expand...
Click to collapse
Hello to everybody.
I've the same device from Seicane. for my Renault Koleos bought 2 months ago in Aliexpress. It came with version 3.30. The information of my device is
- Compilation rk3368
- Kernel 4.4.167 #176 Fri Nov 22 09:34
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
- CPU Octa Core Cortex A53 1.5G
- Android 9. Screen resolution 1024*768. 9 " Screen
- Memory 3940 Mb
I've problems with microphone ( nobody can hear me when calling). I'm looking for an update. Does anyone can confirm if I can install one of the mod firmwares? I guess this should be compatible with PX5 firmwares, but I'm not 100% sure. Does anybody else has this problem with the microphone?
I haven't found any information in Seicane website. Their support is a disaster....
Punisher66 said:
- Version MCU MTCE_HF_V3.30_1 aug 6 2019 11:08:02
Click to expand...
Click to collapse
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
themissionimpossible said:
This is the latest available at least on the net.
There is also a V3.30 sound patched for better audio for units w/o a DSP:
dmcu(MTCE-HF-3.30sp+by+cs-x).7z
https://mega.nz/#F!T1FgjA7A!wc9p40bocqCiBX8XPR50ig?jhUEmAYD
For your microphone problem, try connecting an external one.
Click to expand...
Click to collapse
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test miccrophones). I'll try with external one.
Thank you again.
Hi.
Anyone know, or can you tell me who is the HF manufacturer?
The seller is Secaine, but he does not offer any information, nor does he provide any type of file for updating his devices.: eek:
Punisher66 said:
Thank you very much for your support. I'll try to update the device and to use the external mic. My concern is that volume of the microphone is adjusted to 0 and I haven't found how to change it ( even trying dozens of programs to test microphones). I'll try with external one.
Thank you again.
Click to expand...
Click to collapse
I've tried eternal mic via jack connector and I installed the update. Nothing changed. Nobody can hear me in Bluetooth calls and if I record the sound of the microphone, nothing appears.
I've entered in factory settings and I've seen I have Bluetooth device SD-BC6. I didn't found any option to increase the volume of the microphone. I'm installing programs to access to engineering mode ( I hope I could change the volume of the mic).
In parallel, I've bought in aliexpress an USB microphone, in order to have other input source. Let's see. If none of those test work, I'm thinking on install other firmware like hal9k and root my device.
I don't know what else to do.....
Any idea?
Punisher66 said:
if I record the sound of the microphone, nothing appears.
Click to expand...
Click to collapse
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
themissionimpossible said:
If you used a compatible electret condenser mic, in this case the problem has nothing to do with Bluetooth, so it may be a hardware issue.
Click to expand...
Click to collapse
My guess is that mic volume is lowered to 0 I don't know why, since 2 independent microphones give the same result.
In other android 'phones' I entered in engineering mode and I was able to change this. This is the main option I'm looking for.
In parallel, a USB microphone (I'm waiting for it) would be a different sound source to try with ..... We will see which works
Did you factory reset the head unit?
After a factory reset the mic level should be reset as well.
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MRA58K
ro.build.display.id=YT9218_00005_V004
ro.build.version.incremental=1569378556
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=8.1Go
ro.build.version.security_patch=2017-11-05
jamal2367 said:
This is fake Android 10
I open the whole rom and it´s API 23 Android 6
Click to expand...
Click to collapse
Seicane was the one who give me this directly and said it was Android version 10. I haven't tried it myself because my radio is working smoothly right now. If it's not Android 10 I do apologise as I was told that is the version. I wouldn't lie about this because I have gotten so much from this forum and want to give back. As I said, seicane claim this is Android 10 version. I have the conversation to prove this if needed.
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
acvaristul said:
The end part of the title of the file already says it all: September 25, 2019.
It is obvious that something is wrong there.
Click to expand...
Click to collapse
I honestly didn't pay any attention to the file name. I did mention it to seicane support team that this isn't Android 10 version. They are supposed to be looking into it and sending the correct version soon. I did notice that the specs on my unit is
AllWinner
Quad-Core T3 P1
Board: exdroid
GPU:Mali-400 MP
API:29
I found these online and I am running them on my Seicane PX5.
https://mega.nz/folder/C6Iz0AZC#4vU2rue99881X9MxDxz_YA
---------- Post added at 08:30 AM ---------- Previous post was at 08:29 AM ----------
This also has a new version of Zlink, which is why I updated
Some photos