Related
Marshmallow OTA for canadian xt1563 : https://mega.nz/#!1pxWiSIS!u279kerhsu1HspzFZ4-wrzYfWgtSUqb3o8K8ffLw4lM
For the procedure, look down. Someone posted it on 1st page.
If you altered system ( ex:root) you'll need to go back to stock:
http://forum.xda-developers.com/showpost.php?p=62708260&postcount=5
Root (optional)
TWRP recovery (after applying the OTA) : http://forum.xda-developers.com/moto-x-play/orig-development/recovery-twrp-2-8-7-0-t3194656
The correct SuperSU: http://forum.xda-developers.com/showpost.php?p=64161125
The X Play is actually XT1563. This firmware is for the Moto G.
Update: the above statement is wrong. I can confirm this update is running perfectly on my Koodo X Play!
bngrybt said:
The X Play is actually XT1563. This firmware is for the Moto G.
Click to expand...
Click to collapse
Yeah, but the file listed on mega has lux_retca in its name. Moto X Play is codenamed as Lux, so maybe it is in fact the right file for XT1563? Maybe, it was just an error from poster MerlinMerlinMerlin?
Hmm... I have a Koodo X Play and just checked for the OTA and it wasn't available for me yet, but that has me wondering now. I don't wanna risk it until I'm sure though. Hopefully this means the OTA is out soon though.
Oops! I messed up the title.
Corrected the incorrect xt1053 by the correct xt1563
Just finished installing it through ADB sideload (I'm a Canadian Koodo user), I reinstalled the stock firmware before so that I could start on a fresh image. I had trouble getting into stock recovery at first. I was seeing a no command message when trying to enter it but, then I found the solution:
To get passed that point, you have to use the hold power + vol up button solution but, it's tricky, I had to try 3-4 times before getting it right. This part is kind of messed up, if you hold power button for too long, the phone interpret it as a reboot command. What worked best for me was holding vol up button alone for 5-6 seconds and then, I'd tap and release power button while still holding volume up button.
Click to expand...
Click to collapse
It worked perfectly...
How do you install it? Simply install it in recovery or do we need to install it by adb?
baskwo said:
How do you install it? Simply install it in recovery or do we need to install it by adb?
Click to expand...
Click to collapse
First, you need to have stock recovery, if you installed TWRP custom recovery, you will need to reinstall stock recovery. Entering stock recovery can be tricky, at first you may get an Android robot laying down with a "No command" message.
To get passed that point, you have to use the hold power + volume up button solution but, it's tricky, I had to try 3-4 times before getting it right. This part is kind of messed up, if you hold power button for too long, the phone interpret it as a reboot command. What worked best for me was holding vol up button alone for 5-6 seconds and then, I'd tap and release power button while still holding volume up button.
Edit: a user reported that this method work better (your mileage may vary)
Press and hold the Power Button for 2-5 seconds, while holding it, press and release the Volume Up button. You should now be seeing all the Recovery options.
Click to expand...
Click to collapse
Once you are booted in stock recovery mode, you can simply follow those steps:
Setup ADB and Fastboot on your PC.
Download the OTA update .zip file on your PC and rename it to ota.zip.
Enable USB debugging:
Go to your phone’s settings » About phone » and tap “Build number” Seven times. This will enable Developer options on your phone.
Now go to Settings » Developer options » and tick the USB debugging check box.
Connect your phone to PC.
Now open the folder where you downloaded the OTA update .zip file and then open a command window inside the folder. To do that, do a “Shift + Right click” on any empty white space inside the folder and select “Open command window here” from the context menu.
Now issue the following window to command window to reboot your device into recovery mode:
adb reboot recovery
└ Check your phone’s screen, if it asks for “Allow USB debugging”, accept it by selecting OK/Yes.
Once in recovery mode, use Volume buttons to navigate up and down between options and Power button to select an option.
Select the “Apply update from ADB” option.
Now issue the following command to finally begin installing the OTA:
adb sideload ota.zip
└ This will begin the OTA installation.
Once the OTA zip is installed, select reboot from the main menu of recovery.
Click to expand...
Click to collapse
Please take note that once Marshmallow is installed, nothing is stopping you from reinstalling TWRP and then, it will work as if nothing ever happened. If you need SuperSU, make sure to use SuperSU 2.62, earlier version may cause problem with Marshmallow. Also, if TWRP , ask if you want to install Root, click "Do not install" as it would install an older version of SuperSU. That's why you need to flash SuperSU 2.62 zipfile.
And if I want to keep TWRP?
Any chance someone could post a TWRP backup after installing the OTA?
baskwo said:
And if I want to keep TWRP?
Click to expand...
Click to collapse
You'll just have to reinstall TWRP after. No big deal, you can easily reinstall it afterward. That's what I did and TWRP is working perfectly as if nothing ever happened.
Nico3d3 said:
You'll just have to reinstall TWRP after. No big deal, you can easily reinstall it afterward.
Click to expand...
Click to collapse
Alright, thank you boy! <3 Where can I find the stock recovery?
baskwo said:
Alright, thank you boy! <3 Where can I find the stock recovery?
Click to expand...
Click to collapse
Just grab it from the original firmware zip file... : http://forum.xda-developers.com/moto-x-play/general/official-stock-firmwares-added-xt1562-t3195364
Nico3d3 said:
Just grab it from the original firmware zip file... : http://forum.xda-developers.com/moto-x-play/general/official-stock-firmwares-added-xt1562-t3195364
Click to expand...
Click to collapse
Does the XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-32_cid12_subsidy-DEFAULT_CFC_v2.xml.zip file is ok if I'm from Koodo? Sorry I'm new to the Moto X Play I worked on a S3 before..
baskwo said:
Does the XT1563_LUX_RETLA_DS_5.1.1_LPD23.118-32_cid12_subsidy-DEFAULT_CFC_v2.xml.zip file is ok if I'm from Koodo? Sorry I'm new to the Moto X Play I worked on a S3 before..
Click to expand...
Click to collapse
Yes, it would work but, knowing how slow download from filefactory is, it would be probably take a looonnnggg time to download. That's why I uploaded the correct recovery.img file on my Google Drive, for the benefit of everyone: https://drive.google.com/file/d/0B-OWWP0oC4yLRDhsSDV0Mng3cVk/view?usp=sharing
Nico3d3 said:
Yes, it would work but, knowing how slow download from filefactory it would be probably take a looonnnggg time to download. That's why I uploaded the correct recovery.img file on my Google Drive, for the benefit of everyone: https://drive.google.com/file/d/0B-OWWP0oC4yLRDhsSDV0Mng3cVk/view?usp=sharing
Click to expand...
Click to collapse
Do you have a link the 5.1.1 fw?
I'd like to do a total fresh install then kick off the ota.
Anyone tested this on the xt1562?
Sent from my XT1562 using XDA Free mobile app
I misread last post, sorry about it, that's why I'm editing my post
Nico3d3 said:
Pleaaassseee, at least take the time to read a bit, no more than one page ago, you will have all informations regarding installation and how it worked.
Click to expand...
Click to collapse
There is nothing on that page about the xt1562, Just asking if anyone tested it on that device
Sent from my XT1562 using XDA Free mobile app
Nico3d3 said:
Pleaaassseee, at least take the time to read a bit, no more than one page ago, all informations regarding installation and how it worked are there.
Click to expand...
Click to collapse
Lol, you should read first before telling someone else
Sent from my Nexus 5 using Tapatalk
I have one H60-L02, its chinese model and its not rooted or anything like that.
I was in EMUI 3.1 and I try to update to EMUI 4.0, but I make a mistake because I charge one update of 100MB. I did it by local way, with "dload" in SD.
When Honor 6 restarts he didnt charge android anymore and now:
1) if I restart with 3 buttons he stops in the first "honor powered by android"
2) if I restart with power button + vol up he charge recovery but in chinese and I can only restart cache and hard reset but that doesnt works.
3) if I turn off he restarts again, I cant turn off, he always restart.
I try to put some Original FULL ROMs in SD but they dont charge and dont reinstall anything.
Only when I try to charge this rollback "mega:///#F!uopFUBJa!jp6hkjmftAKjQ8LrriwOTA!ukZzVDIY" to EMUI 3.1 something changes. Now when I starts says "4GLTE" screen and then an "android" screen, but the same 3 steps before and anything else.
PLEASE HELP ME
Any help?
Hi potey10,
there is a recoverymode in HiSuite. Idk what it does but I guess (!) it installs the last working firmware and can make your phone work again.
Here is a guide for ascend mate 7
http://www.gizok.com/blog/huawei-asc...very-tutorial/
Pls report if you tried it!
borg17a said:
Hi potey10,
there is a recoverymode in HiSuite. Idk what it does but I guess (!) it installs the last working firmware and can make your phone work again.
Here is a guide for ascend mate 7
Pls report if you tried it!
Click to expand...
Click to collapse
I think the link dont works
I send the phone to Huawei Support in Spain, and they told me they cannot fix it because is a chinese version. WTF?
I hope the link work this time:
http://www.gizok.com/blog/huawei-ascend-mate7-upgrade-recovery-tutorial/
Here it does.
So you have nothing to loose, if you try it.
Install HiSuite on your Computer, start your Smartphone in Fastbood-Mode (Power-Button + Vol. down), select recovery on HiSuite.
The link says "HiSuite will download a suitable version from the official web, the speed of the downloading will be connected to the network speed of the user. As this is a large version, it will take a long time to download, commonly for 1~2 hours, so please wait patiently."
Good luck!
borg17a said:
I hope the link work this time:
http://www.gizok.com/blog/huawei-ascend-mate7-upgrade-recovery-tutorial/
Here it does.
So you have nothing to loose, if you try it.
Install HiSuite on your Computer, start your Smartphone in Fastbood-Mode (Power-Button + Vol. down), select recovery on HiSuite.
The link says "HiSuite will download a suitable version from the official web, the speed of the downloading will be connected to the network speed of the user. As this is a large version, it will take a long time to download, commonly for 1~2 hours, so please wait patiently."
Good luck!
Click to expand...
Click to collapse
I must try. But I dont know waht kind of version of HiSuite is that.
Thats what you means?? "2.2 One-key Recovery Operating Steps"
What version of HiSuite is that?
I think the version isn't important. There is a recovery option in the newest version.
I tried it. Recovery mode isn't supported on my European L04
I wanted to flash a ROM, so I unlocked the bootloader and installed TWRP successfully. Then I downloaded the ROM, factory reset, format data, and installed the ROM. When the phone booted, it showed a black screen, and only the hardware buttons worked. I could lock the phone, and if I pressed the power button, it would "light up" the screen, but still black. Holding the power button gave me the power menu from the ROM I flashed (advanced boot options).
I did another factory reset and flashed the ROM again, and from thereon out, it never made it to the lock screen again.
I have attempted the eRecovery function, but it doesn't fix the issue either. The firmware downloads and is installed, but then it just boot loops for a couple times, then goes back to the screen suggesting a recovery operation.
Is this permanent now, or can it can still be salvaged?
Huawei Mate 9
Version: MHA-L29C567B190
*Edit:
The ROM I attempted to install was ROM-Aur-v1.5.
I had no ROM installed previously; phone was stock.
I did not manipulate the OEM info; all I did was unlock the bootloader with the unlock code I was given by the Huawei online site.
Solution:
Apparently, unlocking the bootloader several times seems to have solved the issue.
Once again, thanks to everyone who helped me out with this.
Which rom did you install.
What was the rom, which was installed before?
Did you change branding via manipulating oem info?
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
use another Android phone download huaweifirmware finder on the google play ，select mha-l29c567，than select dns update，change your router dns，you can do erecovery after setup dns！
sweetjuice said:
use another Android phone download huaweifirmware finder on the google play ，select mha-l29c567，than select dns update，change your router dns，you can do erecovery after setup dns！
Click to expand...
Click to collapse
Thank you for your response. However, I tried it and it didn't work for me. I downloaded the app, checked the firmware was available, registered the update, changed my router DNS, and then attempted the eRecovery. It downloaded the package then installed it, but the same problem continues.
audioralf said:
Which rom did you install.
What was the rom, which was installed before?
Did you change branding via manipulating oem info?
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
The ROM I attempted to install was ROM-Aur-v1.5.
I had no ROM installed previously; phone was stock.
I did not manipulate the OEM info; all I did was unlock the bootloader with the unlock code I was given by the Huawei online site.
Which stock? Model and firmware Version?
My device: Mate 9 supersu B190 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
you can install a full firmware with hwota method.
audioralf said:
Which stock? Model and firmware Version?
My device: Mate 9 supersu B190 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Click to expand...
Click to collapse
Is this the information you're asking for?
Huawei Mate 9
Version: MHA-L29C567B910
I don't know how to get any other information (other than the IMEI and SN which are on the box), since I can't make it past the boot logo screen.
mavera said:
you can install a full firmware with hwota method.
Click to expand...
Click to collapse
How would I go about doing that? I can't take the phone past the boot logo screen; it just boot loops then goes to the eRecovery screen. And when I try that recovery method, it only gives me the option to download latest version over WiFi and install it. Which does not fix the problem.
cr33p3r1n1134 said:
How would I go about doing that? I can't take the phone past the boot logo screen; it just boot loops then goes to the eRecovery screen. And when I try that recovery method, it only gives me the option to download latest version over WiFi and install it. Which does not fix the problem.
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 use this guide. You can change your reg code as c432, c636 etc. Only you must know your unlock code.
mavera said:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 use this guide. You can change your reg code as c432, c636 etc. Only you must know your unlock code.
Click to expand...
Click to collapse
Rebranding is not really necessary.
@OP
For MHA-L29C567B190 (you wrote B910 which I assume is incorrect), use:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1356/g77/v84935/f2/full/update.zip
http://update.hicloud.com:8180/TDS/...35/f2/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/.../v84935/f2/full/hw/usa/update_full_hw_usa.zip
I don't want to count my chickens before they hatch, but somehow it appears my phone is now working again. I did not rebrand nor update it. I simply unlocked the bootloader, AGAIN (which is what confuses me since I tried it before and it didn't work, at all). Regardless, I am not complaining!
I am not marking this thread as solved yet, just in case, but I will do so later on in the day if the phone continues working as before.
I want to thank all of you for your time and input, I really appreciate it.
Also, I'm never trying to flash anything on this phone again; I have learned my lesson. :/
cr33p3r1n1134 said:
I don't want to count my chickens before they hatch, but somehow it appears my phone is now working again. I did not rebrand nor update it. I simply unlocked the bootloader, AGAIN (which is what confuses me since I tried it before and it didn't work, at all). Regardless, I am not complaining!
I am not marking this thread as solved yet, just in case, but I will do so later on in the day if the phone continues working as before.
I want to thank all of you for your time and input, I really appreciate it.
Also, I'm never trying to flash anything on this phone again; I have learned my lesson. :/
Click to expand...
Click to collapse
Unlocking bootloader does a factory reset so that might be why it's working again
cr33p3r1n1134 said:
I wanted to flash a ROM, so I unlocked the bootloader and installed TWRP successfully. Then I downloaded the ROM, factory reset, format data, and installed the ROM. When the phone booted, it showed a black screen, and only the hardware buttons worked. I could lock the phone, and if I pressed the power button, it would "light up" the screen, but still black. Holding the power button gave me the power menu from the ROM I flashed (advanced boot options).
I did another factory reset and flashed the ROM again, and from thereon out, it never made it to the lock screen again.
I have attempted the eRecovery function, but it doesn't fix the issue either. The firmware downloads and is installed, but then it just boot loops for a couple times, then goes back to the screen suggesting a recovery operation.
Is this permanent now, or can it can still be salvaged?
Huawei Mate 9
Version: MHA-L29C567B190
*Edit:
The ROM I attempted to install was ROM-Aur-v1.5.
I had no ROM installed previously; phone was stock.
I did not manipulate the OEM info; all I did was unlock the bootloader with the unlock code I was given by the Huawei online site.
Solution:
Apparently, unlocking the bootloader several times seems to have solved the issue.
Once again, thanks to everyone who helped me out with this.
Click to expand...
Click to collapse
I know this is a really old thread, but this is happening to me too. How did you unlock the bootloader again? adb isn't recognizing my device? Any suggestions?
ji_mestone said:
I know this is a really old thread, but this is happening to me too. How did you unlock the bootloader again? adb isn't recognizing my device? Any suggestions?
Click to expand...
Click to collapse
Unfortunately, I do not remember the exact process I performed in order to unlock the bootloader the final time.
I remember I had to play a lot back and forth with adb and fastboot. Have you checked if fastboot recognizes your phone?
I believe that what I did was start from the very beginning; installing a recovery (I used TWRP). If fastboot recognizes your phone, and you are able to install a recovery, from there I'm pretty sure adb will recognize your phone and then you can unlock the bootloader.
I would recommend not trying anything fancy. Only recovery and bootloader.
I hope this answers your question and helps you out. Best of luck.
cr33p3r1n1134 said:
Unfortunately, I do not remember the exact process I performed in order to unlock the bootloader the final time.
I remember I had to play a lot back and forth with adb and fastboot. Have you checked if fastboot recognizes your phone?
I believe that what I did was start from the very beginning; installing a recovery (I used TWRP). If fastboot recognizes your phone, and you are able to install a recovery, from there I'm pretty sure adb will recognize your phone and then you can unlock the bootloader.
I would recommend not trying anything fancy. Only recovery and bootloader.
I hope this answers your question and helps you out. Best of luck.
Click to expand...
Click to collapse
Thanks for responding! I'm still at a loss two hours later.
Unfortunately USB debugging got turned off somewhere along the way, so ADB and fastboot aren't recognizing my phone. I can still access TWRP, but when I try adb sideload in TWRP is just says it's starting but keeps loading and nothing comes up and I get a message on my computer that says "the last USB device you connected to this computer malfunctioned, and Windows does not recognize it"
ji_mestone said:
Thanks for responding! I'm still at a loss two hours later.
Unfortunately USB debugging got turned off somewhere along the way, so ADB and fastboot aren't recognizing my phone. I can still access TWRP, but when I try adb sideload in TWRP is just says it's starting but keeps loading and nothing comes up and I get a message on my computer that says "the last USB device you connected to this computer malfunctioned, and Windows does not recognize it"
Click to expand...
Click to collapse
Yeah, the ADB sideload problem also happened to me. Eventually gave up on that.
I hope I'm allow to post links.
But here is a link to something I remember using.
http://www.makeuseof.com/tag/android-wont-connect-windows-adb-fix-it-three-steps/
Using those tools mentioned in that post helped me out. I had to do a lot of experimenting with that as well. Every time I connected and disconnected my phone from my computer, I checked which were the references that needed deleting, then deleted them. It was tedious, but I'm not expert, so maybe I took the long way.
Maybe try using those tools?
Hello
I have a Mate 7 L-09 and I am in the same situation of Sassan_Payehdar described in the his thread
Hi everyone,
I have a Huawei Mate 7 LT-09 16 gig, and I recently did these works:
1. The installed rom was android 6 B513.
2. I read a post in this forum (that is closed now) and updated it to B553 KingVIP Chinese through restoring nandroid TWRP backup.
3. After install I saw lots of bugs, so I wipe all partitions through advanced wipe in TWRP.
4. Then install marshmallow stock recovery using mobopx tool.
after that nothing works.
The USB drive just show hisuite CD-Rom and device not recognize for ADB Options in windows 7,8,8.1 and 10.
There is no recovery,
There is no option using combinations of the buttons vol+,Vol- and power.
I tried installing stock ROM through .app file and dload folder and still nothing works.
I tried Jtag and after lots of work, fastboot screen appears and reinstalling all versions of different recoveries and looks like the software is installing nowhere in neverland!, there is nothing!
I take my device to a technician and he said there is maybe no way to re-run the device. I really need help.
Apologize for poor English and thanks in advance help.
Click to expand...
Click to collapse
No bootloader, no recovery, no option using combinations of the buttons vol+,Vol- and power, no recognition by ADB on PC only huawei logo.
He tried Jtag to appear fastboot, but I never read anything about Jtag. Where can I find it and how to use it?
Sorry for my English.
Can somebody help me?
Thank you so much!!
Al
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Mother_Teresa said:
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Click to expand...
Click to collapse
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
verdiverdi said:
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
Click to expand...
Click to collapse
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Mother_Teresa said:
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Click to expand...
Click to collapse
Ok
that's unbelievable I was be able to access in fastboot&rescue mode....
I connected the device to my pc but ADB doesn't recognized it.
Now how can I do?
Many thanks
Al
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Foxar26 said:
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Click to expand...
Click to collapse
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
verdiverdi said:
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
Click to expand...
Click to collapse
Wonderful!!!!!!
I solved my problem!!!!!
I flashed a TWRP backup get from this forum and now my phone is working.
Thank you to everybody...
Al
I'm very happy for u, can u give me which one you choose for the backup
Foxar26 said:
I'm very happy for u, can u give me which one you choose for the backup
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
and choose the appropriate TWRP backp. Flash it by TWRP recovery. It were very simple!!!.
Obviously you have have a working TWRP recovery.....
Hi
Ok, this is hard to explain.
My phone was original a honor 8 from china, then 2 years back I made the rebrand to european version lrd09 6.0 , then I flash to emui 5.0 nougat. I was perfectly fine with that over 2 years, I live in argentina and it never ask me for update.
Now I am on vacation on italy (europe), and one update was available, I update my device, first update 400 mg file, all ok. Then a next update was available of 700mg, I did not thought it could have been a problem because my phone had a european version, so I did it.. and it enter in boot loop until it enters the recovery, I try to download latest version and recovery but it does not work.
How can I recover my phone? I guess I let one image version of emu5 when everything worked fine in my computer and not sure if in my phone too.
But now I dont have twrp working, only the original huawei recovery, it has bootloader and I guess the rebrand stays.
I love my pictures with this phone, and this was my first day from my vacation, I want to cry
The only solution that I can think off, is to buy a new honor8 or something with similar good camera and price, then use that and back into argentina try to recover my phone and sell one of the two.
There is another solution?
AngelLestat said:
Ok, this is hard to explain.
My phone was original a honor 8 from china, then 2 years back I made the rebrand to european version lrd09 6.0 , then I flash to emui 5.0 nougat. I was perfectly fine with that over 2 years, I live in argentina and it never ask me for update.
Now I am on vacation on italy (europe), and one update was available, I update my device, first update 400 mg file, all ok. Then a next update was available of 700mg, I did not thought it could have been a problem because my phone had a european version, so I did it.. and it enter in boot loop until it enters the recovery, I try to download latest version and recovery but it does not work.
How can I recover my phone? I guess I let one image version of emu5 when everything worked fine in my computer and not sure if in my phone too.
But now I dont have twrp working, only the original huawei recovery, it has bootloader and I guess the rebrand stays.
I love my pictures with this phone, and this was my first day from my vacation, I want to cry
The only solution that I can think off, is to buy a new honor8 or something with similar good camera and price, then use that and back into argentina try to recover my phone and sell one of the two.
There is another solution?
Click to expand...
Click to collapse
Generally... A factory reset after the update if there is a bootloop solves the problem for me
boris dmello said:
Generally... A factory reset after the update if there is a bootloop solves the problem for me
Click to expand...
Click to collapse
Wow, that it would be way more simple that I imagine, thanks for answer.
So.. I need to do this?
https://www.youtube.com/watch?v=jFM64qW7Wsw
What it does the option wipe cache partition does? it may help?
If I wipe data, I lose my pictures located in the main memory card? Or these remain in the dcim folder?
Or for that I need Android Data Recovery and cross fingers?
If i make a factory reset, then I can update my honor in europe to emui5 without this happening to me again?
The fact that it has the bootloader, it may block me to do this?
boris dmello said:
Generally... A factory reset after the update if there is a bootloop solves the problem for me
Click to expand...
Click to collapse
Ok, I tested, it complete the factory reset to the 100%, then I reboot, but the boot loop continues
The factory reset I did, it is possible that the smartphone have go back to the chinese lrd 00 version? impossible I guess, it should have returned to the factory european version that it had with emui4...
So not sure why this did not work.
I have heard that the Chinese variants which are rebranded to L09 gets stuck in a bootloop after a certain EMUI 5 update. I guess the same has happened with you. Before I can help you any further, can you confirm if your bootloader is unlocked. To check it, if your device is powered off, hold down your volume down button and immediately plug the device to a computer. If you're in a bootloop, hold the power button for a force reboot and as soon as the screen goes black hold down volume down and connect your device to PC.
hackslash said:
I have heard that the Chinese variants which are rebranded to L09 gets stuck in a bootloop after a certain EMUI 5 update. I guess the same has happened with you. Before I can help you any further, can you confirm if your bootloader is unlocked. To check it, if your device is powered off, hold down your volume down button and immediately plug the device to a computer. If you're in a bootloop, hold the power button for a force reboot and as soon as the screen goes black hold down volume down and connect your device to PC.
Click to expand...
Click to collapse
Hi, thanks for helping me, ok. I did what you ask me.
After doing that, it show me a white screen with the android robot image and it said:
FastBoot Rescue Mode
Please connect usb to your computer and open hisuite (i dont have hisuite in this notebook)
In red: Phone Unlocked
FRP unlock.
I want to tell you that I check the memory flash card that I have in the honor 8, and like I thought, there is an image that I did with the twrp, but I guess I dont have twrp anymore.
Maybe many things that you told me, I will not be able to do it until I return from my vacation, because in this PC, I dont have android studio, or hisuite, or all the plugins that I remember to use when I rebrand this phone.
But maybe I can do it anyway. I dont remember if I have to download the whole android studio to install TWRP.
AngelLestat said:
Hi, thanks for helping me, ok. I did what you ask me.
After doing that, it show me a white screen with the android robot image and it said:
FastBoot Rescue Mode
Please connect usb to your computer and open hisuite (i dont have hisuite in this notebook)
In red: Phone Unlocked
FRP unlock.
I want to tell you that I check the memory flash card that I have in the honor 8, and like I thought, there is an image that I did with the twrp, but I guess I dont have twrp anymore.
Maybe many things that you told me, I will not be able to do it until I return from my vacation, because in this PC, I dont have android studio, or hisuite, or all the plugins that I remember to use when I rebrand this phone.
But maybe I can do it anyway. I dont remember if I have to download the whole android studio to install TWRP.
Click to expand...
Click to collapse
Nah, you don't need to install the whole Android Studio just for ADB/Fastboot. Grab the installer (I made) from here: https://github.com/hackslashX/ADB-F...ster/versions/adb_fastboot_installer-1.0s.exe
Get Huawei 32-bit drivers: https://github.com/hackslashX/ADB-F...master/versions/drivers/huawei-drivers-32.zip
Get Huawei 64-bit drivers: https://github.com/hackslashX/ADB-F...master/versions/drivers/huawei-drivers-64.zip
(You only need one of the above drivers)
With all utilities installed, you can now easily flash TWRP.
For firmware, please tell me the complete build number for your device i.e. FRD-L09XXX (what are those three Xs).
hackslash said:
Nah, you don't need to install the whole Android Studio just for ADB/Fastboot. Grab the installer (I made) from here: https://github.com/hackslashX/ADB-F...ster/versions/adb_fastboot_installer-1.0s.exe
Get Huawei 32-bit drivers: https://github.com/hackslashX/ADB-F...master/versions/drivers/huawei-drivers-32.zip
Get Huawei 64-bit drivers: https://github.com/hackslashX/ADB-F...master/versions/drivers/huawei-drivers-64.zip
(You only need one of the above drivers)
With all utilities installed, you can now easily flash TWRP.
For firmware, please tell me the complete build number for your device i.e. FRD-L09XXX (what are those three Xs).
Click to expand...
Click to collapse
Thanks for the links and info.
Although I am not sure how to know the build number, I guess the update to emu5 was something like 431.. or something like that, but I am not sure, I did this two years ago.
I need to know the build number to install TWRP or recover my phone?
If it is bricked, not sure how I can access to the build number.