Database Info

Moto g bricked

Hello,
I was bought moto g 8 GB and i used it one day.
My phone does not work
I made factory reset and after that phone works but after 2 hours when i turn on phone, i see only Moto logo, after that he appeared black screen. I will record video tomorrow if you need it.
When i hold power down and power button i can see fastboot flash mode. I can see normally options in flash mode but also i see "Device is LOCKED". http://postimg.org/image/oa3blyd2n/
http://postimg.org/image/9pm8r4i3z/
When i click on recovery mode phone has restart and i see moto logo and black screen...
I wait 7 hours but nothing happened.
Please help me

Joomlar said:
Hello,
I was bought moto g 8 GB and i used it one day.
My phone does not work
I made factory reset and after that phone works but after 2 hours when i turn on phone, i see only Moto logo, after that he appeared black screen. I will record video tomorrow if you need it.
When i hold power down and power button i can see fastboot flash mode. I can see normally options in flash mode but also i see "Device is LOCKED". http://postimg.org/image/oa3blyd2n/
http://postimg.org/image/9pm8r4i3z/
When i click on recovery mode phone has restart and i see moto logo and black screen...
I wait 7 hours but nothing happened.
Please help me
Click to expand...
Click to collapse
The good thing about development phone like Moto G are that you can never brick your phone. It is very much recoverable. Try unlocking bootloader and then flash official firmware from this link http://sbf.droid-developers.org/phone.php?device=14
Use this link to unlock bootloader,
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
You can bring your phone back to life.
Hope it helps.

smohanv said:
The good thing about development phone like Moto G are that you can never brick your phone. It is very much recoverable. Try unlocking bootloader and then flash official firmware from this link http://sbf.droid-developers.org/phone.php?device=14
Use this link to unlock bootloader,
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
You can bring your phone back to life.
Hope it helps.
Click to expand...
Click to collapse
Or he can ask for replacement
Sent from Samsung Chat

jaspreet997 said:
Or he can ask for replacement
Sent from Samsung Chat
Click to expand...
Click to collapse
I would not wait for two weeks for replacement when we can bring the phone to life within 30min.
I agree a risk element in it. If the phone is basically faulty, then it is not worth trying the way I suggested. Has this worked before you started mess around?
Good luck..

smohanv said:
I would not wait for two weeks for replacement when we can bring the phone to life within 30min.
I agree a risk element in it. If the phone is basically faulty, then it is not worth trying the way I suggested. Has this worked before you started mess around?
Good luck..
Click to expand...
Click to collapse
If the phone is basically faulty (a potential hardware issue) the last thing one should do is unlock the bootloader and lose the warranty.
Sent from my Nexus 5

If you have ordered from flipkart Just call them and pretend that its not turning on at all.....and they will give you a hand to hand replacement!

I can return phone but it cost more then 60 EUR via DHL and i must wait long time...
Today i will try to unlock bootloader and flash firmware. Thanks you all, have you more suggestions?
I dont know what happened. This is strange problem because telephone work fine 5 hours and after power off, i see only Motorola Logo. I hope that i will not miss guarranty when i unlock bootloader.

Unlock device is finished. Can you give me tutorial for flashing stock firmware? I am noob
U used this tutorial: http://www.theandroidsoul.com/install-moto-g-uk-generic-firmwarestock-rom/
but after flashing i have the same problem
Is there any solution? If not, how i can lock bootloader because now i lose guarranty

Joomlar said:
Hello,
I was bought moto g 8 GB and i used it one day.
My phone does not work
I made factory reset and after that phone works but after 2 hours when i turn on phone, i see only Moto logo, after that he appeared black screen. I will record video tomorrow if you need it.
When i hold power down and power button i can see fastboot flash mode. I can see normally options in flash mode but also i see "Device is LOCKED". http://postimg.org/image/oa3blyd2n/
http://postimg.org/image/9pm8r4i3z/
When i click on recovery mode phone has restart and i see moto logo and black screen...
I wait 7 hours but nothing happened.
Please help me
Click to expand...
Click to collapse
I had exactly the same issue, after I unlocked the bootloader this happened to me, don't worry is not bricked just a software issue with some providers firmwares, what did I do? The good about this is, you should be able to put it in fastboot.
Read all before try it please
* I unlocked the bootloader (seems like you already did it)
* I flashed CWM http://forum.xda-developers.com/showthread.php?t=2563599
Here the next issue was I needed to flash a ROM but I wasn't able to put any file in my device even mouting the USB in CWM or adb push, so: sideload
* I downloaded this rom http://forum.xda-developers.com/showthread.php?t=2606943 (you could use other but that worked for me)
* I Put the zip file in the fastboot directory
* I turned on my device in recovery mode (CWM, you can do it by the fastboot, select recovery, use vol up to enter, vol down to move, power button doesn't work here).
* Wipe factory, cache and dalvik (just in case I think factory wipe is enough)
* I went to the option flash from zip file, flash from sideload (or similar not sure about the name but it says sideload)
adb sideload myromfile.zip
once the adb finish, CWM will notify you and you can flash your rom regularly. It will finish, then you should reboot, It should take about 5 minutes for the first boot. Then my phone worked again.
Sorry if I said something wrong, first time I talk here and I felt identified with your issue and wanted to help you.

Thank you. I flashed CWM but i can not enter to it. When i hold volume down + power button i enter in fastboot flash mode. How i can enter to recovery cwm? When i enter to recovery trough fastboot mode nothing happened. Phone has restart and appeared moto logo. When i flash it i got ".mismatched partition size".
Is there any tutorial for me ? I am very frustrated with this phone

sounds like the phone might be faulty if it happened and you didnt do anything to cause it ,
anyway another option for you is to try a external reset,you have attempted too flash other firmwares so not 100% sure it will work but give it a try through fastboot recovery.
click the link below and halfway down the page follow the instruction for "external reset"
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth

This is my steps:
-Flash this falcon_retgb_user_4.3_14.10.0Q3.X-76-LGG-8_54_release-keys-cid7-Retail_GB via this tutorial http://www.theandroidsoul.com/install-moto-g-uk-generic-firmwarestock-rom/
-flash CWM V3 or V2
Do i need to flash some other stock ROM before i do external reset? EDIT; external reset does not work becase i can not enter to recovery and wipe data/cache...

smohanv said:
The good thing about development phone like Moto G are that you can never brick your phone. It is very much recoverable. Try unlocking bootloader and then flash official firmware from this link http://sbf.droid-developers.org/phone.php?device=14
Use this link to unlock bootloader,
https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
You can bring your phone back to life.
Hope it helps.
Click to expand...
Click to collapse
Except it isn't a development phone and of course you can brick it. Try erasing the bootloader and recovery and see how you get on then. Im pretty sure it'd be bricked??
To OP - you should have returned phone especially as you are a noob, no offence but a noob trying to recover a phone which has 'broken' by itself is not going to end well especially as its impossible to tell if its hardware or software issue in the first place.
I wish you luck though.

Joomlar said:
Thank you. I flashed CWM but i can not enter to it. When i hold volume down + power button i enter in fastboot flash mode. How i can enter to recovery cwm? When i enter to recovery trough fastboot mode nothing happened. Phone has restart and appeared moto logo. When i flash it i got ".mismatched partition size".
Is there any tutorial for me ? I am very frustrated with this phone
Click to expand...
Click to collapse
To get into CWM after flash it, go to fastboot mode, then in the menu, use ONLY vol down and move to the recovery option, once in the recovery option push vol up.
It also could be you phone has a fault from factory.

scott_doyland said:
Except it isn't a development phone and of course you can brick it. Try erasing the bootloader and recovery and see how you get on then. Im pretty sure it'd be bricked??
To OP - you should have returned phone especially as you are a noob, no offence but a noob trying to recover a phone which has 'broken' by itself is not going to end well especially as its impossible to tell if its hardware or software issue in the first place.
I wish you luck though.
Click to expand...
Click to collapse
You can perfeclty recover an erased or corrupt bootloader, and from there flash anything you want, including recovery. Yeah, it's an unbrickable phone.
http://forum.xda-developers.com/showthread.php?t=2623587

Joomlar said:
Thank you. I flashed CWM but i can not enter to it. When i hold volume down + power button i enter in fastboot flash mode. How i can enter to recovery cwm? When i enter to recovery trough fastboot mode nothing happened. Phone has restart and appeared moto logo. When i flash it i got ".mismatched partition size".
Is there any tutorial for me ? I am very frustrated with this phone
Click to expand...
Click to collapse
i got the same error, but i just kept flashing cwm like five times in a row then vol down then up and it loaded cwm.
try it.

Yes, it can be bricked depending on the version... Mine can't have the bootloader unlocked...
Sent from my XT1032 using xda app-developers app

I must return phone. My bootloader is unlocked, i hope that manufacturer will give me new phone.
IF you have any solution respond me please.

Maybe you could try this way http://forum.xda-developers.com/showthread.php?t=2542219 !?

Joomlar said:
I must return phone. My bootloader is unlocked, i hope that manufacturer will give me new phone.
IF you have any solution respond me please.
Click to expand...
Click to collapse
Your phone seems to be fine. the only option worth a try is to flash official firmware that should go ok with a locked bootloader forget about custom recovery and rooms
and in any case do not unlock the bootloader until you some how solve this and in the picture you posted the phone already is in flash mode just make your PC to recognize your phone by installing the necessary drivers and flash
Find everything you need in the post above mine

Need help getting to stock recovery

Need help...
Was messing the around with the screen density in the buildprop.. after reboot, "systemui keeps FCing" making it unusable and I cant do anything. Attempting to do a hard button combo to go into stock recovery but cant seems to get it to work.. Googleing tells me to, hold volume down and power till the LG logo, release power and rehold again.. it just reboots again.. holding all 3 brings me to a korean menu that I cant read.. holding up and power brings me to a recovery menu that I think only the service centre can use, there's no option in there, only asking me to reboot.
Any kind souls please....

scpion said:
Need help...
Was messing the around with the screen density in the buildprop.. after reboot, "systemui keeps FCing" making it unusable and I cant do anything. Attempting to do a hard button combo to go into stock recovery but cant seems to get it to work.. Googleing tells me to, hold volume down and power till the LG logo, release power and rehold again.. it just reboots again.. holding all 3 brings me to a korean menu that I cant read.. holding up and power brings me to a recovery menu that I think only the service centre can use, there's no option in there, only asking me to reboot.
Any kind souls please....
Click to expand...
Click to collapse
I've been trying to get into my stock recovery for some time now trying all sorts of button combos but to no avail. Previously I had the g2 and when it updated from jellybean to kitkat, the combo for entering stock recovery changed however, this new combo doesn't seem to work on the G Pro 2 either
You should be able to revive your device back to stock using the LG pc Suite however, after tampering with the system, it is often necessary to perform a factory reset after the pc suite has done it's work which will need you to enter stock recovery.
If you are completely stuck, I would suggest restoring your device using the pc suit and, all being well, your device will boot sufficiently for you to perform a reset through the phone settings menu. If you are really lucky, it may boot properly and you may not need to perform any reset however, it would still probably be a good idea to do so.

bobsie41 said:
I've been trying to get into my stock recovery for some time now trying all sorts of button combos but to no avail. Previously I had the g2 and when it updated from jellybean to kitkat, the combo for entering stock recovery changed however, this new combo doesn't seem to work on the G Pro 2 either
You should be able to revive your device back to stock using the LG pc Suite however, after tampering with the system, it is often necessary to perform a factory reset after the pc suite has done it's work which will need you to enter stock recovery.
If you are completely stuck, I would suggest restoring your device using the pc suit and, all being well, your device will boot sufficiently for you to perform a reset through the phone settings menu. If you are really lucky, it may boot properly and you may not need to perform any reset however, it would still probably be a good idea to do so.
Click to expand...
Click to collapse
I cant use the LG Suite... the screen doesnt allow me to choose the connection type.. It just FC constantly.. I am screwed..:crying::crying:

scpion said:
I cant use the LG Suite... the screen doesnt allow me to choose the connection type.. It just FC constantly.. I am screwed..:crying::crying:
Click to expand...
Click to collapse
Think the only option is to send it in officially and say I dun know what happened......

Help
Has anybody found the way to hard-reset D838 from a bootloop? I really cant reach the recovery mode

manas.neo said:
Has anybody found the way to hard-reset D838 from a bootloop? I really cant reach the recovery mode
Click to expand...
Click to collapse
I had tried everything.. Even adb command to reboot into recovery. It just brings me to a broken Android with red triangle. I am starting to think there is no stock recovery built in that is accessible to users..

I am now at the service centre. Well the guy can detect that its rooted.. voids warranty.... But will try to see if he can help to reflash the firmware.. If not have to change hardware and will be chargeable....... Fingers crossed. He did say users are not able to access the recovery..
Guys.. Until there's custom recovery, pls dun mess with it.....

That is really bad. I am stuck at bootloop and unable to reach the recovery mode. I wonder how entire web just talks about a hardreset process that doesnt even work
scpion said:
I had tried everything.. Even adb command to reboot into recovery. It just brings me to a broken Android with red triangle. I am starting to think there is no stock recovery built in that is accessible to users..
Click to expand...
Click to collapse

manas.neo said:
That is really bad. I am stuck at bootloop and unable to reach the recovery mode. I wonder how entire web just talks about a hardreset process that doesnt even work
Click to expand...
Click to collapse
I know.. I was desperate too... There's 2 versions, the other model is f350 or something.. Anyway at the service he did flash the phone again for me foc. BUT! He stamp a big NO WARRANTY as well... Goodbye to my balance 10 months warranty.. Buy hey.. I am grateful that I have my phone working again..I think.
I confirm with him again.. Yes, there is no stock recovery users can access....

scpion said:
I know.. I was desperate too... There's 2 versions, the other model is f350 or something.. Anyway at the service he did flash the phone again for me foc. BUT! He stamp a big NO WARRANTY as well... Goodbye to my balance 10 months warranty.. Buy hey.. I am grateful that I have my phone working again..I think.
I confirm with him again.. Yes, there is no stock recovery users can access....
Click to expand...
Click to collapse
Glad you were able to get your phone back. I have some positive news. I am trying out a recovery method as we speak. Using the LG Software update & USB driver tool I found the option for a update recovery. So I gave the IMEI and it prompted for a connection to the device which wasnt there as the phone is stuck in a boot loop. So I thought if it is going to restore the firmware from PC ( and not OTA) then it at some point of time will take the phone to download mode. So I just put the phone in download mode and VOILA it recognised the connection. And right now it is downloading the recovery firmware. The firmware being downloaded is around 1.5GB which is exactly what size I expected it to be. I have my fingers crossed. Just hope it goes through fine.

manas.neo said:
Glad you were able to get your phone back. I have some positive news. I am trying out a recovery method as we speak. Using the LG Software update & USB driver tool I found the option for a update recovery. So I gave the IMEI and it prompted for a connection to the device which wasnt there as the phone is stuck in a boot loop. So I thought if it is going to restore the firmware from PC ( and not OTA) then it at some point of time will take the phone to download mode. So I just put the phone in download mode and VOILA it recognised the connection. And right now it is downloading the recovery firmware. The firmware being downloaded is around 1.5GB which is exactly what size I expected it to be. I have my fingers crossed. Just hope it goes through fine.
Click to expand...
Click to collapse
As I mentioned in an earliar post on this thread, you can usually get the device into a booting state using the lg pc suite. You will probably have to perform a factory reset but, hopefully, after using the tool, you can access the software factory reset in the settings menu. From past experience with other lg devices, it can often help if you run the recovery more than once in the pc suite.

bobsie41 said:
As I mentioned in an earliar post on this thread, you can usually get the device into a booting state using the lg pc suite. You will probably have to perform a factory reset but, hopefully, after using the tool, you can access the software factory reset in the settings menu. From past experience with other lg devices, it can often help if you run the recovery more than once in the pc suite.
Click to expand...
Click to collapse
Hi Bob,
Yes I think the same option is there in the LG PC Suite as well. But unless you do what I have tried to do it wont recognise a device that has not booted yet. Devices soft-bricked or bootlooping wont be recognised by the PC suite for recovery. But thanks for the tip. I'd keep that in mind and see if it'd need another factory reset after recovery. But it seems like it will be a hard reset done by the recovery happening right now

manas.neo said:
Hi Bob,
Yes I think the same option is there in the LG PC Suite as well. But unless you do what I have tried to do it wont recognise a device that has not booted yet. Devices soft-bricked or bootlooping wont be recognised by the PC suite for recovery. But thanks for the tip. I'd keep that in mind and see if it'd need another factory reset after recovery. But it seems like it will be a hard reset done by the recovery happening right now
Click to expand...
Click to collapse
Good luck. If no joy just try the pc suit. I'm fairly sure I had a success on my old g2 with a similar problem to yours. Can't remember exactly what I did but I kept trying things and eventually the pc suit recognised and sorted my device. Perhaps try to adb reboot recovery with the pc suit on screen??

PC suite and the software update thing didn't work for me. It just refuse to recognize my device. Hope things work out for u!

bobsie41 said:
Good luck. If no joy just try the pc suit. I'm fairly sure I had a success on my old g2 with a similar problem to yours. Can't remember exactly what I did but I kept trying things and eventually the pc suit recognised and sorted my device. Perhaps try to adb reboot recovery with the pc suit on screen??
Click to expand...
Click to collapse
Thanks. I was able to revive my phone. No loss of apps and data. Just the root was lost. Can you tell me what issues you have witnessed after such a recovery that made you to do a factory reset? The phone looks fine at the moment but wonder if it'd end up in a boot loop again.

manas.neo said:
Thanks. I was able to revive my phone. No loss of apps and data. Just the root was lost. Can you tell me what issues you have witnessed after such a recovery that made you to do a factory reset? The phone looks fine at the moment but wonder if it'd end up in a boot loop again.
Click to expand...
Click to collapse
You shouldn't have a problem. I just like to have a clean start and to make sure that there are no alien files left from my previous tampering.

bobsie41 said:
You shouldn't have a problem. I just like to have a clean start and to make sure that there are no alien files left from my previous tampering.
Click to expand...
Click to collapse
It went all smooth. I'd like to shout out to all LG G Pro 2 users to make a note of this method and try it whenever they soft-brick their phones.

service
scpion said:
I know.. I was desperate too... There's 2 versions, the other model is f350 or something.. Anyway at the service he did flash the phone again for me foc. BUT! He stamp a big NO WARRANTY as well... Goodbye to my balance 10 months warranty.. Buy hey.. I am grateful that I have my phone working again..I think.
I confirm with him again.. Yes, there is no stock recovery users can access....
Click to expand...
Click to collapse
Hi there,
I am in the same situation, I can not do the factory reset in any way was mentioned here (pc suite, lg update) in the forum, because there is no connection between the pc and the mobile.
Where you from anyway and which mobile service did you take your phone, how much was the service cost?
THX

david_csaba said:
Hi there,
I am in the same situation, I can not do the factory reset in any way was mentioned here (pc suite, lg update) in the forum, because there is no connection between the pc and the mobile.
Where you from anyway and which mobile service did you take your phone, how much was the service cost?
THX
Click to expand...
Click to collapse
Did you try this:
VOL DOWN + POWER
when LG logo appears release booth keys and wait 2 sec then
VOL DOWN + VOL UP
you should get factory reset screen

[GUIDE] How to recover from OnePlus soft bricked?

I decided to write a guide on how to recover from a bricked OnePlus One. This is my first guide.
About me: I am a newbie on Android.However, the XDA community has taught me a lot about my Android phone for the first month of using it. That's right! I have only been using Android for less than one month so take this guide with a grain of salt. But if you happen to soft brick your One, this is the guide to turn to. I have created two mind-bending/heartbreaking/frightening scenarios that I have experienced. Though, resolved thanks to this community.
Note: This will wipe your phone!
Scenario 1:
Soft bricked, (CM gear keeps spinning but won't boot to lock screen)
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
How to find out if you have unlocked bootloader:
1. Locate the folder where you installed the OPO Toolbox.
2. Hold Shift and right click on ANY white area within the folder.
3. Left click 'Open command window here'
4. Type:
fastboot oem device-info
If it returns True on tampered. Then you have unlocked your bootloader.
I hope this guide helps solve your soft-bricked problem. Good luck!

I suggest that a mod moves this to the General section

pandasa123 said:
I suggest that a mod moves this to the General section
Click to expand...
Click to collapse
Report the thread if you think its necessary.

Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:

Digital Arm said:
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Click to expand...
Click to collapse
You don't have an unlocked bootloader.
Transmitted via Bacon

timmaaa said:
You don't have an unlocked bootloader.
Transmitted via Bacon
Click to expand...
Click to collapse
Thx got it:cyclops:

Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
Hi i am stuck in scenario 2...I did all a u said but i cant flash CM XNPH22R ...where do i find this file...i cant find it on my phone either ..pls help ??

Thank god for this thread omg, saved my life

Locked Bootloader
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??

RiccoSuave said:
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
Click to expand...
Click to collapse
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.

Champi12301 said:
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Click to expand...
Click to collapse
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.

RiccoSuave said:
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
Click to expand...
Click to collapse
Then first you need to unlock the bootloader via fastboot,but that action erases all data. I assume,if you modified the boot via fastboot, USB DEBUGGING is working,so after try to do the softbrick tutorial of the thread.
Tecleado desde mi 1+1.

how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!

deanwinchester370 said:
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
Click to expand...
Click to collapse
Did you find a solution ?
I'm facing the exact same issue on my OPO.
>> bootloader locked
>> no recovery
>> impossible to unlock the bootloader
>> OPO stuck at 1+ logo and keep rebooting agin and again and again...
....i think my OPO is dead T_T
Is it a way to force the bootloader unlock ?
Please HELP !!!

Didn't work for me
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.

All done
davmeva said:
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
Click to expand...
Click to collapse
No one replied to this but never mind, took me two days but I now have a working phone. So you can call in the dogs, cheers

hi davmeva
did you fixed your oneplus one till now or not because i have also same situation here and no success till now .
i did by mistake all this stuff and now nothing work still same condition
if you got any solution please share it

Need help with soft or hard bricked honor 6 H60-L01

I was tinkering with my phone, did not know what I was doing, tried to flash a stock recovery to replace twrp, most probably was flashing the wrong version as the recovery was not booting, (being the noob i am) also flashed recovery.IMG.header and now my phone is stuck in bootloader with error message
Please update system again (in red color)
And under the gutted Android logo
Something about boot image being corrupted (again in red)
and an error number.
Adb does not recognize my device, actually even device manager does not recognize it any more.
Tried to force install drivers and any other method I could think of or read here on XDA forums. Still the same
So, is there a room of developers or tech enthusiasts who can help me to try to solve this problem.
Thanks

This is the screen I get, battery does not charge, no matter how hard I try, I can not enter a bootloader without error message, and my PC does not even recognize my device when I connect it. Mean windows device manager does not show any changes in hardware

muradulislam said:
I was tinkering with my phone, did not know what I was doing, tried to flash a stock recovery to replace twrp, most probably was flashing the wrong version as the recovery was not booting, (being the noob i am) also flashed recovery.IMG.header and now my phone is stuck in bootloader with error message
Please update system again (in red color)
And under the gutted Android logo
Something about boot image being corrupted (again in red)
and an error number.
Adb does not recognize my device, actually even device manager does not recognize it any more.
Tried to force install drivers and any other method I could think of or read here on XDA forums. Still the same
So, is there a room of developers or tech enthusiasts who can help me to try to solve this problem.
Thanks
Click to expand...
Click to collapse
first of all download the stcok firmware that suits your device, then follow one of these methods.
1. Prepare a capacity of more than 2GB SD card
2. confirm the presence UPDATE.APP dload file directory, then the whole dload copied to the SD card root directory. SDcard\dload\UPDATE.APP
3. Press the volume button down, press power button, volume up and down keys to sustained 10 seconds, the phone will automatically trigger an increase in the SD card.
.
Second Methods : Upgrade normal
1. Prepare a capacity of more than 2G SD card, it is recommended to use Micro SD class 8 and up
2. Format SD card (optional).
3. confirm the presence UPDATE.APP dload file directory, then the whole dload copied to the SD card root directory.
4. SD card into the phone is turned on, go to “Settings”, select “Settings – Phone Upgrades – System Software Update – Local Upgrade.” Based on the dialogue choose whether to back the data, and finally select the “Upgrade” button to start the upgrade.
tell me if it works.

I tried this method once, did not work. Will give it another try and will let you know.

muradulislam said:
I tried this method once, did not work. Will give it another try and will let you know.
Click to expand...
Click to collapse
I hope it works

@muradulislam did you solve it buddy? By doing the three button reset?

Nope
Still get the same screen no matter what I do

How about flashing firmware?! @DigiGoon

Try this method buddy:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.

I already tried pressing the volume down button and connecting to PC simultaneously, also tried power + volume down.
Also tried power+volume up, 3 btn restart.
Nothing works. It does not boot into bootloader no matter what i try and my PC does not recognize it at all in the present state so no chance for adb to recognize it.
Also installed Huawei Usb drivers, kouch's universal drivers.
I am thinking that it's a hard brick looking like a soft brick.
I saw a guide somewhere saying that I need to physically pry open the phone and do some meddling with the hardware to get it fixed but I am not into that so just closed the page and never tried to find it again.
Well, that's the whole sad story :crying:

muradulislam said:
I already tried pressing the volume down button and connecting to PC simultaneously, also tried power + volume down.
Also tried power+volume up, 3 btn restart.
Nothing works. It does not boot into bootloader no matter what i try and my PC does not recognize it at all in the present state so no chance for adb to recognize it.
Also installed Huawei Usb drivers, kouch's universal drivers.
I am thinking that it's a hard brick looking like a soft brick.
I saw a guide somewhere saying that I need to physically pry open the phone and do some meddling with the hardware to get it fixed but I am not into that so just closed the page and never tried to find it again.
Well, that's the whole sad story :crying:
Click to expand...
Click to collapse
Don't lose hope, try again

muradulislam said:
I already tried pressing the volume down button and connecting to PC simultaneously, also tried power + volume down.
Also tried power+volume up, 3 btn restart.
Nothing works. It does not boot into bootloader no matter what i try and my PC does not recognize it at all in the present state so no chance for adb to recognize it.
Also installed Huawei Usb drivers, kouch's universal drivers.
I am thinking that it's a hard brick looking like a soft brick.
I saw a guide somewhere saying that I need to physically pry open the phone and do some meddling with the hardware to get it fixed but I am not into that so just closed the page and never tried to find it again.
Well, that's the whole sad story :crying:
Click to expand...
Click to collapse
If it is still under warranty, I would try oficial support. They generally dont bother about installing recoveries, 3rd party ROMs...
Even if it is out of warranty, they could provide you a reasonable cheap repair. Better than fiddling inside and do some physical damage that could mean replacing the whole board.

zinko_pt said:
If it is still under warranty, I would try oficial support. They generally dont bother about installing recoveries, 3rd party ROMs...
Even if it is out of warranty, they could provide you a reasonable cheap repair. Better than fiddling inside and do some physical damage that could mean replacing the whole board.
Click to expand...
Click to collapse
Your idea seems to be the better solution :good:

Agreed with zinko_pt here, don't open it and try anything physically, instead throw it in a Huawei service center, they'll definitely help you.

zinko_pt said:
If it is still under warranty, I would try oficial support. They generally dont bother about installing recoveries, 3rd party ROMs...
Even if it is out of warranty, they could provide you a reasonable cheap repair. Better than fiddling inside and do some physical damage that could mean replacing the whole board.
Click to expand...
Click to collapse
I am thinking the same thing. Will try'em out now.
Its the Chinese version of honor 6 h60-L01 so was thinking of taking it to them whenever I visit China again.
May be I should try the local Huawei service center in Pakistan first but I am not so sure that they can solve it here...

muradulislam said:
I am thinking the same thing. Will try'em out now.
Its the Chinese version of honor 6 h60-L01 so was thinking of taking it to them whenever I visit China again.
May be I should try the local Huawei service center in Pakistan first but I am not so sure that they can solve it here...
Click to expand...
Click to collapse
It's worth a try though. They could tell you they can't repair it due to being a Chinese version, but they could also analyse the symptoms all tell you what repair is needed.

zinko_pt said:
It's worth a try though. They could tell you they can't repair it due to being a Chinese version, but they could also analyse the symptoms all tell you what repair is needed.
Click to expand...
Click to collapse
Nice. I will definitely do that now. Thanks.

muradulislam said:
Nice. I will definitely do that now. Thanks.
Click to expand...
Click to collapse
Well, today my son used my bricked honor 6 as a brick, its gone for good now, I guess
Sent from my PLK-L01 using XDA Labs

muradulislam said:
Well, today my son used my bricked honor 6 as a brick, its gone for good now, I guess
Click to expand...
Click to collapse
That's hilarious and sad at the same time, I hope you get a new device ASAP

muradulislam said:
Well, today my son used my bricked honor 6 as a brick, its gone for good now, I guess
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
So which one you are gonna get now?
Sent from my PLK-L01 using Tapatalk

Help me fix a bricked OPO :(

Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?

try charging the phone for a few hours

se7enlyn said:
try charging the phone for a few hours
Click to expand...
Click to collapse
yeah, forgot to mention that. can't even charge it. when I plug it in it does the same. tries to turn on. shows the first splash screen and reboots doing the same again and again. doesnt even show the charging screen with chinese text and battery animation.

sounds like u need a new battery

ireaper4592 said:
sounds like u need a new battery
Click to expand...
Click to collapse
already tried that too. had a replacement battery laying around. changed it and still no luck.

@bmark240
help please

se7enlyn said:
@bmark240
help please
Click to expand...
Click to collapse
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732

Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.

bmark240 said:
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
Click to expand...
Click to collapse
Yes, I have TWRP installed, but cant access it. Shows the TWRP splash screen and then reboots after like 10 seconds or so.
ADB does not see device. Only shows the device during that 10 second TWRP splash screen time, but even then no commands are effective and it just reboots.
Already tried holding down power button for few seconds. No luck.
I already installed all the possible drivers and media feature packs on my Windows 10. Still no luck.
And yes, I am running latest Windows 10 Pro x64.
And no, since I cant access Fastboot, I can not re-flash TWRP either.

kallum7 said:
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Gonna try that right now. Hopefully that will fix it.

Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.

THEVAN3D said:
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
Click to expand...
Click to collapse
because i had bricked my phone a few months ago and that is how i got my phone back using the colour os

THEVAN3D said:
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
Click to expand...
Click to collapse
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out

FairuzOnn said:
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
Click to expand...
Click to collapse
Thanks, but I already fixed it.

i had it in the past for some reason too. Managed to fix it using the color os method. Carefully followed the steps until i could flash again. That was a year ago tohugh. There should be some thread around wit some all-in-one solution against bricks.