I just bought an infinix note 4 x572 and have tried rooting it with Kingroot, Iroot etc without any success.
I had to tend to ADB command lines and SP FLASHING TOOLS.
I have enabled developer mode, engaged USB debugging and have been able to flash the various TWRP for infinix note 4 that i can get. I even had one on this website XDA-developers.
I have flashed all TWRPs per SP flash and ADB.
The problem is that when i try to boot to the TWRP either using ADB <fastboot boot recovery twrp.img> I end up at the stock recovery.
When I switch the phone off and hold volume+ and insert the USB cable, the phone boots to the INFINIX LOGO and then stalls for a few seconds and then reboots with a second-time infinix logo screen and boots normally into a standard android home screen.
I even flashed a new chameleon rom and lost my IMEI in the process.
Can somebody help me to know what is preventing the TWRP from splashing and how to get my IMEI installed.
Thank you.
Related
Im trying to flash my phone into a new custom ROM cause my current on is slow and keeps crashing my phone also want to update to a different ROM. Problem is I cant reboot into recovery or boot loader or anything. Boot recovery just gives me a pink screen. Recovery just gets stuck at boot logo (it use to work but its all of a sudden decided it doesn't want to work) same thing happens when I try to factory reset my phone also the fast boot method doesnt seem to work either cause I cant get Fastboot to load on my pc. Already tried flashing my ROM and Recovery via Flashify and other apps flash your phone but just got stuck on boot logo. Tried doing a factory reset again got stuck at boot logo. Tried installing the custom ROM via Rom Installer. Still stuck at boot logo. I did several searches and there doesn't seem to be any way to resolve this issue without a recovery or other boot method im hoping someone here can help me. Also my phone wont show up on my pc so I cant access my files and im unable to install Droid explorer cause it doesn't detect my sdk folder which is odd cause it says all the drivers are installed and tools like HiSuite detects my device but the device wont show up in my computer.
Phone Model: Huawei Ascend Y300
Current ROM: Cyanogen Mod 11 (nightly version)
CM11 Version: 11-20150327-NIGHTLY-u8833
Android Version: 4.4.4
Root Access: Yes
USB Debugging Activated: Yes
Current Recovery: TWRP
PC Version: Windows 7 64-bit Home Premium (also have android studio installed on my computer)
Mobile Network: Spark 3G
If you need any further information just ask
Hi
Thanks for writing to us at XDA Assist. Take a look at this thread:
[Guide] Huawei Ascend Y300 Unlock & Root
Thread closed, thanks.
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
So i got this phoen the other day and noticed the pre installed rom is taking up to many resources, so i decided to try and root the phone and install a custom rom, after the phone rebooted from using Kingo Root It got stuck in an infinite boot loop.
Phone just restarts over and over again, i help Power and Volume Up, this takes me to the boot loader screen and i selected recovery, now i jhad twrp installed and naturally assumed that it would go into recovery mode, Well it didnt and now i am stuck with a phone that just either restarts or sits in fastboot mode when i put it into it.
Any suggestions, to be honest i cant find any stock rom for it, this is the only phone i have and i need it.
Go to the official website and download upgrade tool .. it will identify the phone then downloads the firmware and u get ur stock ROM
Hello, I have an INFINIX NOTE 7 phone, and I disassembled BOOTLOADER, and the process was successful. After you lost, I flashed the modified BOOT IMG file from Magisk, and then the phone remained in BOOTLOOP mode and does not want to enter the fastboot mode Please help me solve the problem
Was ur problem solved if not this is my watsapp no +254705980548 Remote services available...
MOHAMED89# said:
Hello, I have an INFINIX NOTE 7 phone, and I disassembled BOOTLOADER, and the process was successful. After you lost, I flashed the modified BOOT IMG file from Magisk, and then the phone remained in BOOTLOOP mode and does not want to enter the fastboot mode Please help me solve the problem
Click to expand...
Click to collapse
From where you got fast boot recovery
Mohd.Ahmad said:
From where you got fast boot recovery
Click to expand...
Click to collapse
No way to get into recovery mode. What you need to do is flash the device. If you can't do it reach me via watsapp no +254705980548 for assistance
Please help everyone.
I'm currently flashing my device infinix note 7,
on SP FLASH TOOL I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)",
my device was detected on a USB drive as "Mediatek preloader usb vcom (android)"
it looks like my smartphone is not in edl mode, I've tried by pressing the top volume, the bottom volume, the top + bottom volume,
But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
thanks
Adit
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working
ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool
mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.