Hello, I have an INFINIX NOTE 7 phone, and I disassembled BOOTLOADER, and the process was successful. After you lost, I flashed the modified BOOT IMG file from Magisk, and then the phone remained in BOOTLOOP mode and does not want to enter the fastboot mode Please help me solve the problem
Was ur problem solved if not this is my watsapp no +254705980548 Remote services available...
MOHAMED89# said:
Hello, I have an INFINIX NOTE 7 phone, and I disassembled BOOTLOADER, and the process was successful. After you lost, I flashed the modified BOOT IMG file from Magisk, and then the phone remained in BOOTLOOP mode and does not want to enter the fastboot mode Please help me solve the problem
Click to expand...
Click to collapse
From where you got fast boot recovery
Mohd.Ahmad said:
From where you got fast boot recovery
Click to expand...
Click to collapse
No way to get into recovery mode. What you need to do is flash the device. If you can't do it reach me via watsapp no +254705980548 for assistance
Please help everyone.
I'm currently flashing my device infinix note 7,
on SP FLASH TOOL I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)",
my device was detected on a USB drive as "Mediatek preloader usb vcom (android)"
it looks like my smartphone is not in edl mode, I've tried by pressing the top volume, the bottom volume, the top + bottom volume,
But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
thanks
Adit
Related
Hello, my phone i.e, Letv Le1s , is stuck in bootloop and i cant access fastboot , can't access recovery mode and download mode I think recovery's gone My friend flashed twrp recovery into it but something went wrong. Then my friend locked the bootloader , i tried hard reset but nothing happened. Now ,when i plug it in to my pc , it starts charging . If i press power button , it goes into bootloop. No key combination works for any mode . Please help
dedSec Hacker said:
Hello, my phone i.e, Letv Le1s , is stuck in bootloop and i cant access fastboot , can't access recovery mode and download mode I think recovery's gone My friend flashed twrp recovery into it but something went wrong. Then my friend locked the bootloader , i tried hard reset but nothing happened. Now ,when i plug it in to my pc , it starts charging . If i press power button , it goes into bootloop. No key combination works for any mode . Please help
Click to expand...
Click to collapse
Take a look here >>> http://forum.le.com/in/index.php?threads/how-to-recover-stuck-on-letv-logo.7359/
not solved
I tried using x500 rom instead , but nothing changed .. Now im getting errors in sp flash tool .
I got different errors with different versions of sp flash tools .
With sp flash tool v1612 im getting - " BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4) "
And with version 1532 im getting - " BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) "
Help me im poor
dedSec Hacker
Help me im poor
Click to expand...
Click to collapse
http://www.letv.re/forum/14-le-1s-x500x507x501/
hi bro
laikexpert said:
dedSec Hacker
http://www.letv.re/forum/14-le-1s-x500x507x501/
Click to expand...
Click to collapse
letv forum link not working,
It takes to main page of forum
Bro help me my mobile is letv 1s it was not start and ican't access recovery mode and can't access fastboot mode help plzz and not access flash tool
Flash Stock ROM using PC
Use the Mediatek flash tool to flash the stock firmware using PC.
Hope it helps.
Guys I unlocked my bootloader using QFIL . The unlocking was successful but my phone went into bootloop. Pc won't recognize it and my phone won't even open in recovery mode plz help.
kiLLer_Brains said:
Guys I unlocked my bootloader using QFIL . The unlocking was successful but my phone went into bootloop. Pc won't recognize it and my phone won't even open in recovery mode plz help.
Click to expand...
Click to collapse
Try booting to your device's compatible and flash your device's stock firmware.
I DO NOT GIVE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?
No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again
Since the device is treble enabled,I tried to install a custom rom like OxygenOS from the other thread but the problem is even if the installation is successfull via TWRP, it stucks from the logo that I mention from the title. I did full swipe factory reset from TWRP still I can't pass the logo yet, any solutions? I tried other roms but the result is still the same.
Realme has just release its flashtool to flash there ofp firmware through fastboot. Just try it. and post result.
Note: This require bootloader to unlock
Flashtool Link:
https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool.zip
Firmware Link:
https://combinefile.com/index.php?a=downloads&b=file&c=download&id=42977
Bro my realme 2 phone stuck on logo after update.There us no fastboot mode.
In shop they said 90% emmc damaged.what can I do please help me
I have the same problem mine
1-can't enter recovery mode and if I try fastboot it restart and stuck in boot screnn '' realme powerd by android '' in 5 s before I can write a command
any help pls
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working
ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool
mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.