My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
Related
I'm using a lenovo s820, rooted, running stock rom and jb 4.2.1
I couldn't find any recovery like cwm or twrp for my phone and I ended up downloading a recovery that said it was a version of cwm for my phone from this app called mobileuncle mtk tools
The app flashed the recovery onto my phone and rebooted into recovery except that it didn't boot into recovery
Now it is stuck in a boot loop where it only shows the lenovo logo but does not boot
I've tried booting into recovery by holding "vol up+vol down+power" but it does the same thing
I tried booting into factory mode but it is in chinese and I cannot understand anything in it
I have a backup of my rom before flashing the recovery but it is stuck in the boot loop even after restoring the backup
I've also searched a lot and can't find a solution to my problem!
I've seen some solutions saying I should flash stock rom using flash tools but there's a big problem here. Flash Tools refuses to flash the stock rom onto my phone. I tried to do it while keeping the phone in meta mode but it wasn't happening.
I've attached the image of the factory mode menu
Please help asap! I can't use my phone at all and I'm panicking and I don't know what to do!!! :crying: :crying: :crying:
Update: I managed to restore clockworkmod recovery on my phone and I tried to restore the stock os from it but it says installation aborted and refuses to install the os :/
Look here:
http://forum.xda-developers.com/showthread.php?t=2576898
hey every one 2 days back i was able to flash lewa os rom on my canvas 2 .. when i found this updater in apps i downloaded the update of that rom i think it is called O.T.A.. i went to recovery mode and flashed it ..i flashed that update with out enabling usb debugging ..
NOW I BRICKED MY PHONE all i am able to see is a boot logo all the time like it restarts and shows that boot logo i am unable to boot into recovery or factory mode.. i have been trying to unbrick it for hours and days as its the only phone i have .. please help me out of this cant install the drivers or my pc wont recognize the phone it ends up unable to install usb .. am really worried i cant buy an other phone please any one help me out of this .... i want to solve it solve it asap as i have no other phone to use please .. I CAN'T ENTER DOWNLOAD OR RECOVERY MODE OR ANY OF IT WHEN I TRY TO ENTER RECOVERY MODE WHAT IT DOSE IS JUST RESTARTS AND SHOWS THE LOGO AGAIN AND AGAIN... PLEASE HELP ME OUT OF THIS
Try flashing Stock JB ROM by Paplu using SPFlashTools.
http://forum.xda-developers.com/showthread.php?t=2167244
I never flashed LeWa OS but don't Update Over the Air (OTA) as it might be downloading the update for that device (as it a ported ROM (I think)) the ROM was actually made for.
And don't worry. All of us had bricked devices at some point of time.
I prefer you use SPFlashTools on a Win 7 PC as drivers are a bit complicated to install on Win 8 as they are not signed. After that, download CWM img and flash it using SPFlashTools (tutorial to flash just recovery is also given or you ask if you are not able to do it) as recovery flashed through Mobile Uncle Tools also doesn't boot after factory resets and a couple of more situations.
Hello,
I have a chines smartphone named Alps AW880. It uses an MT6577 chipset. I was trying to instal CWM on it which failed because of the signature verification. I used SP flash tool and that worked fine but everytime the phone tries to boot into recovery, it turns black and restart. I tried this tens of times got frustrated and formatted whole flash I don't have my stock ROM or recovery and have no idea which custom recovery will work. The phone is still detected on SP flash tool and I'm able to flash recovery.img but it doesn't work. Now the phone is not turning on at all.
I need help please can this be unbricked?
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
praik96 said:
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
Click to expand...
Click to collapse
Don't worry my friend one and only one solution just flash the stock ROM with flashing tools. You can search in XDA thread regarding this....
Else download the latest from this link
http://xdafirmware.com/micromax-a117
For flashing instructions follow this link-
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
not able to install other ROM s in a117
Sir I installed xld ROM 1.3 first time ,it booted successfully but it lacks sim toolkit (sim not supporting) ,whenever I try to install any other ROM it sticks to the boot image (bootloop) but at the same time xld ROM is easily installed
I have tried everything, formatting data ,cache in Mount and storage, cleared dalvik and partition
So pls guide me a solution
Thanks
Karbonn sparkle v after trying cyanogen mod 13 nightlies got hard bricked and after that it is not switching on, there is no sign of life in the phone as the phone even doesnot goes in recovery mode and no bootlogo plz help me to clear this situation.
See if you can flash the firmware on it http://forum.xda-developers.com/sparkle-v/general/stock-rom-marshmallow-t3302087
Addhyan said:
Karbonn sparkle v after trying cyanogen mod 13 nightlies got hard bricked and after that it is not switching on, there is no sign of life in the phone as the phone even doesnot goes in recovery mode and no bootlogo plz help me to clear this situation.
Click to expand...
Click to collapse
Try to flash the stock firmware though SP flash tools.(if your device is detecting in PC )
How to root6.0marsmailow
Similar issue with Karbonn Sparkle V. Please Help!
AdityaAg said:
Try to flash the stock firmware though SP flash tools.(if your device is detecting in PC )
Click to expand...
Click to collapse
Hi Aditya, I've accidentally formatted all the partition on my sparkle V and now only a bootloop with KARBONN logo. I am able to go to fastboot but not to recovery. I tried flashing each recovery (CWM, TWRP, PHILZ) through fastboot and all the time the flashing went successful, but not at all going to recovery mood. I also tried connecting the phone with preloader VCOM driver to flash with SP tool, but my phone is no more detecting in VCOM mode as it was earlier. Any suggestion - if I can flash the ROM in fastboot mode or with the help of any other tool.
Please help,
Deb
D-expert said:
Hi Aditya, I've accidentally formatted all the partition on my sparkle V and now only a bootloop with KARBONN logo. I am able to go to fastboot but not to recovery. I tried flashing each recovery (CWM, TWRP, PHILZ) through fastboot and all the time the flashing went successful, but not at all going to recovery mood. I also tried connecting the phone with preloader VCOM driver to flash with SP tool, but my phone is no more detecting in VCOM mode as it was earlier. Any suggestion - if I can flash the ROM in fastboot mode or with the help of any other tool.
Please help,
Deb
Click to expand...
Click to collapse
Try flashing the rom in fastboot mode .