Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
praik96 said:
Hey I got a problem on my micromax Canvas Magnus A117.
I installed twrp on my mobile with mobileuncle tools from play store and i rebooted my phone.
When i rebooted it got stucked in bootloop and then i cant even reboot to recovery with the adb command it just boots and stucks into bootloop and does not reboot to recovery, i lost my recovery i guess and it does not even boots to fastboot.
PLEASE!!!! Help me !!!
I dont know what to do know.
Can i install new rom by adb commands somehow, but i've seen vids that installs bye twrp and adb but i dont have recovery so dont know what to do!!!!!!!
Click to expand...
Click to collapse
Don't worry my friend one and only one solution just flash the stock ROM with flashing tools. You can search in XDA thread regarding this....
Else download the latest from this link
http://xdafirmware.com/micromax-a117
For flashing instructions follow this link-
http://androidxda.com/flash-stock-rom-using-smart-phone-flash-tool
not able to install other ROM s in a117
Sir I installed xld ROM 1.3 first time ,it booted successfully but it lacks sim toolkit (sim not supporting) ,whenever I try to install any other ROM it sticks to the boot image (bootloop) but at the same time xld ROM is easily installed
I have tried everything, formatting data ,cache in Mount and storage, cleared dalvik and partition
So pls guide me a solution
Thanks
Related
Hello,
Recently,I downloaded ROM Manager app from Play Store to flash CWM,as there was no CWM flashable .zip file for my phone. After downloading the CWM and flashing it(for micromax a70),my phone is unable to go in recovery mode....Even my phone does not have downloading mode so I cannot install any other ROM and also I cannot move to stock as there is no software like odin(samsung) for micromax . Please help with this. Your help will be appreciated. Please explain me like I m a 8-year old.:good:
Same problem
i too have same problem with a87 ....
i have formatted all the files in cwm
i have formatted all the files in cwm and now my phone not getting switch on.... not even getting anything on my screen
my phone neither getting into recovery boot nor in flash boot
please help me out,,,
not boot
dinkesh jain said:
i have formatted all the files in cwm and now my phone not getting switch on.... not even getting anything on my screen
my phone neither getting into recovery boot nor in flash boot
please help me out,,,
Click to expand...
Click to collapse
same here... phone stuck... through it...
HI FRIEND AM AGAIN HERE WITH NEW UNBRICKING TUTORIAL FOR MICROMAX A35 AND OTHER Spreadtrum DEVICES
REQUIREMENTS :
1.cwm backup
2.cwm
3.boot.img
4.pc
5.mob which is stuck at boot logo and cant be flashed by research download or other tool
6.a rom {if backup doesnt work }
for those who are having stuck at boot logo problem ,
follow these steps
1.flash recovery to boot partiton
Code:
fastboot flash boot recovery.img
2.then press power key you ll boot in cwm
3.now wipe data and dalvik cache
4.place the backup in clockworkmod/backup/(your backup here)
5.now do restore backup .please do advance restore, restore system.img only
6.flash the boot.img to boot again
Code:
fastboot flash boot boot.img
link for backup
http://www.mediafire.com/download/86qssa1vs10doag/jelly+blend+cwm+backup+by+gopinaidu.zip
LINK FOR BOOT.IMG :
https://docs.google.com/file/d/0B8ks3Q1UXCFjZzJITS1MUHczM28/edit
credits
AKASH UJJAINKAR
PLEASE PRESS THANKS BUTTON
Not Working!
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
ijaz_shariff said:
According to you I tried to unbrick my phone, but it didnt worked.
After 1st step I unable to boot in cwm. after flashing recovery into boot partition from the fastboot mode itself i tried to power on the phone so that it can boot into cwm but it didnt reacted. den i tried after removing battery, then also its not working.
My mobile is not getting started, when i try to switch it on it just continuously vibrates no display on screen nothing just vibration.
I am able it launch only fastboot. I don't know what to do, nothing is working on it. I tried to flash it by upgradedownload tool but that is also not working.
I extracted the .pac file I got these files.
boot.img
fdl1.bin
fdl2.bin
HVGA_logo_256.bmp
nvitem.bin
recovery.img
SC6820_DSP.bin
SC8800G_sc6820_modem_vlx.bin
SC8810.xml
system.img
u-boot-256M.bin
u-boot-spl-16k.bin
userdata.img
vmjaluna.imagenkcbsp-sc8810_nodebug
It will be good if i can place all these files in my phone by fastboot mode.
In fastboot mode I am getting only few partition viz.
boot , recovery, system, userdata
what about other MISC files with format .bin,.bmp? where should i place these files and how?
Please help me on this ... I struggling since 2 months.
Click to expand...
Click to collapse
many users tested it and it worked fine maybe u didnt follow correctly
Thanku so much its really works thnks man !!!
Problems in newly installed rom in micromax a35
I successfully flashed the stock rom in my bricked micromax a35 using the spreadtrum research download tool.
But there are a few problems I m getting. Please help.
1. Bluetooth is able to pair with other devices, but when I try to send or receive files using bluetooth, it doesn't accept.
2. IMEI number is changed for both sims. Will this create any problem?
3. When I try to call or somebody calls me, the dialer crashes and both sims shows no network.
4. Internet is not working.
Plz friends if there is any solution to this problem.
I had downloaded the stock rom files from xdadevelopers.
micromax a35 vibrate problem when switch on the phone
Hi,
My self pratik, i get some problem in my micromax a35.
that is when i try to switch it on it just continuously vibrates, no display on screen nothing just vibration
kindly provide me some solution
thanks
hey same problem here also pls reply any solution for this
mmx a35 stuck at logo
i was trying to install a custom rom but i cliked backup instead recovery it was taking much time so i removed battery now it is stuck at bolt logo . i have tried above method but when reboot again it stuck at bolt logo
Hey there,
I have a Micromax AQ4501, during flashing Custom ROM I think I made some mistake or selected improper ROM so my phone is not getting ON, it just shows the logo and that's it.
No recovery menu or any other option is available now, only fastboot mode is working...
Can u help me to solve this issue and recover my phone...?
Sent from my D2502 using XDA Free mobile app
mmx a35 stuck
While taking backup i removed the battery because it was taking time.....the sim cards were not detected,i thought factory reset would work but my phone is just vibrating again and again and not startingplease help me guys!!!
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Hovatek said:
From what you've explained, seems your phone is running on stock recovery and not custom, that would explain the installation aborted error, else, you're flashing files either in the wrong format or improperly downloaded/copied
The solution is to flash the system.img from stock backup and your phone will be back up.
I need you to clear something up. you said
"I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!"
How exactly did you flash it?
Click to expand...
Click to collapse
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
varungr said:
I flashed d stock rom by software called brcm multidownloader tool.....
when i was flashing percentage of completeion was there and at last it showed OK IN green colour.
And i tried installing CWM recovery.img to my mob...but there also installation aborted...... plzz help me bro....
Click to expand...
Click to collapse
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Hovatek said:
if you flashed the stock ROM and flashing was successful, its only logical to say your phone should be in good condition now. am I missing something?
Click to expand...
Click to collapse
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
varungr said:
Yes i flashed d stock rom by brcm software and after 100% i was told to remove usb cable and then my phone restarted ...now also phone stuck in boot screen only..
today i installed cwm recovery and there i cant mount system ot sd card...not even anything..
if i flash using ad package ...after 100% it gives installation aborted...
what shld i do???
Click to expand...
Click to collapse
So did you find any solution bro... Facing the same problem.. Tired of Googling.. Used Every method like adb,fastboot but cannot get further...
Stucked in CWm bootloop Micromax mad a94
Can any one help me to fix this crap cwm bootloop on my mad a94.Whenever I turn on my phone it goes into the cwm screen .I hd tried to wipe data, dalvic cache.mount sd, system etc but it doesnt work plZ help me!!
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
Do the following
Go to the recovery mode
Select advance and wipe dalvik cache
Return to main menu and wipe data factory reset
And wipe cache partition
That's it. Reboot phone
Hit thanks
varungr said:
GUYS PLZZ HELP ME IN THIS.....IAM TIRED OF SEARCHING GOOGLE FOR SOLUTIONS AND LAST CAME UP HERE!!
so for tweaking my graphics in my mobile micromax mad a94 i installed a fukin app called "Chain Fire 3d". then it told to installe d drivers and rebooted.... after rebooting my deive was stuck at BOOT LOGO .
I TRIED TO INSTALL STOCK ROM BY Brcm_MultiDownloader_1450 SOFTWARE AND I FLASHED D ROM.....BUT AGAIN THE PROBLEM STILL OCCURS!!! STUCK AT BOOT LOGO!
I ALSO TRIED BY UNINSTALLING CHAINFIRE 3D BY ADB COMMANDS ...BUT WHEN ENTERING ADB SHELL COMMAND I GOT "ERROR: CLOSED"....AND ALSO TRIED INSTALLING STOCK ROM BY FASTBOOT BUT ALSO FAILED THERE
MAIN PART COME HERE ...PLZZ SEE PPL ..BEG U!!!!
I WENT TO FLASH STOCK ROM VIA RECOVERY MOD BY INSTALLING PACKAGE FROM SD CARD
AND AFTER SOME SECONDS IT SHOWED"INSTALLATION ABORTED"
ALSO TRIED TO INSTALL BOOT.IMG OF MY DEVICE AGAIN BUT THERE ALSO IT GAVE "INSTALLATION ABORTED"
NOW WHATEVER I FLASH IT GIVES INSTALLATION ABORTED....AND NOW ....IN RECOVERY MOD I CANNOT CHOOSE FILE FROM SD CARD ALTHOUGH MY MEMMORY CARD IS PROPER !!1
I CANT INSTALL ANYTHING FROM INSTALLATION PACAKGE!!1
SO GUYS IAM BEGGING U ..HELP ME IN THIS.... HARDLY 1 MONTH OVER ...SEARCHING NOW ALSO....
PLZZZ GUYS!!!
Click to expand...
Click to collapse
dude samething happened to me if its because of chainfire then do the following take ur battery out and at the time u insert go to recovery mode micromax recover - power+volume down then from there go to choose a install new zip that is it can be restored only if u have a backup or else try finding a image in google and this must work and if u dont have backup and only idea i can share is clear cache go to advanced clear dalvik cache and reboot ua phone and again take off battery while booting and restart :good:
all the best
Chainfire 3D only support Gingerbread or lower. Not for ics+, try to wipe cache and dalvik,if problem still exists, reflash ur rom
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
It seems that MMX has locked the Bootloader after the LP OTA update. So try booting to fastboot and then with a connected PC, unlock the Bootloader with the fastboot oem unlock command. Then use SP Tools to flash a custom recovery. I've seen that this takes a few tries so go at it again and again, removing and reconnecting the usb cable until the flashing occurs(of course, assuming that you have all necessary usb drivers installed). Philz and TWRP themed version seems to be working fine(haven't thoroughly checked the others).
akhil4845 said:
My device is an 8GB Unite 2 which was OTA updated to LP. I was trying to flash a custom recovery, TWRP 3.0.2-1 by @Hell7
http://forum.xda-developers.com/uni...very-twrp-3-0-2-1-recovery-micromax-t3368507.
I flashed the same using Flashify at first which returned an error so I tried with Hashr which flashed it successfully. But rebooting to recovery only shows up a fading Micromax logo after which the device just restarts itself. Thereafter I tried another one
http://forum.xda-developers.com/unite-2/development/recovery-twrp-3-0-1-0-micromax-unite2-t3354392,
which managed to do nothing as well. Also tried Philz Touch Recovery, which also met the same fate. Then I tried flashing recovery using SP Tools with the available scatter file but then SP Tools failed to detect the device (it just detects the driver but loses it soon after). I tried resetting the device but that too failed and the device restarted after showing the same fading logo. I kinda understand that the recovery partition is failing to boot. But now how can I get back to at least stock recovery so I can reset or use SP Tools. Besides, my boot loader page is also not showing up(the one with all the selections). Did I make any mistake in flashing KK recoveries over an LP ROM?(but all of the recovery threads have posts indicating that they work in LP as well ) Any help would be appreciated.....:crying:
Click to expand...
Click to collapse
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Yeah I got it...... Thank you all
ChahatGupta said:
Uhh no, you can't flash any recovery in LP with apps,
And now u have lost ur recovery, just flash it witj SP Flash Tool, simple!
Click to expand...
Click to collapse
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
vasup0261 said:
hi sir i am having micromax unite 2 A106 i rooted my phone with king root it is successful but problem is with custom rom i could not boot into custom recovery, micromax logo fades followed by black screen and restarts.
i tried installing custom rom with uncle tools same problem
i tried with su flash tool using laptop same problem (i am getting successful msg)
note: my internal storage is 4gb and my phone storage is 2.5gb
please help me in this regard.
Click to expand...
Click to collapse
hi can some one help me out with this.
Please.
I had the same problem. Try to install stock rom with pc it will get back stock recovery
I had a custom 5.1.1 carbon rom with a twrp recovery and well I wanted 6.0 + nethunter I have been trying to install cyogen or acip rom with no luck just hangs on NVidia log , I stupidly flashed recovery img fro cryogen and no cant boot in to recovery no more , if I open fast boot I get my tablet listed in fastboot devices and nothink in adb devices if I try to flash recovery back to twrp using
fastboot flash recovery twrp.zip it just does nothink no errors just sits there I don't know what to try so asking for some help , I'm using my laptop and work pc with no difference
hope some one can help thanks
craig
ok I sumhow reinstalled twrp , but when I install croyogen rom just hangs on NVidia logo what can i do ? update anythink like bootloader? , new twrp seems not to load or cwm recovery wont load eather
Craigst1 said:
ok I sumhow reinstalled twrp , but when I install croyogen rom just hangs on NVidia logo what can i do ? update anythink like bootloader? , new twrp seems not to load or cwm recovery wont load eather
Click to expand...
Click to collapse
Flash stock, reboot, than twrp+custom rom.
https://developer.nvidia.com/shield-open-source