Related
Please help me root my lg optimus P500 with gingerbread V20G downloaded from lg's server.Its not even getting rooted my superoneclick & gingerbreak.Pls help.....
Sent from my LG-P500 using XDA Premium App
Wrong forum buddy. Belongs in general
Sent from my LG-P500 using XDA App
doktornotor rage summon
I give up. Click on the recovery howto in my signature and flash custom recovery. After that, flash a rooted ROM. If you dislike this advice, then kindly search harder. People generally get irritated when then are answering the same questions 10 times a day because people are too lazy.
superoneclick (gingerbreak exploit) work for me on stock V20c, check this thread:
http://forum.xda-developers.com/showthread.php?t=1156403
hxxp://www.lg-p500.ru/2011/06/root-android-233.html
shanktech said:
Please help me root my lg optimus P500 with gingerbread V20G downloaded from lg's server.Its not even getting rooted my superoneclick & gingerbreak.Pls help.....
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Hi guys, regarding the problem about rooting the original GB, it can be done, and it's not that complicated.
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20G GB ROM.
2. if you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse, after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Connect the phone to the PC with Debugging mode (Enter the phone settings menu, to the Development and tick the USB debugging mode)
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf,
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF wait until it will appear in the window again Starting ADB server..., after that,
b. Turn USB Debugging ON, and after this trick it will start rooting.
This is the method that i did twice and it worked like a charm.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it. Also update busybox. After this you have root access and you can install a custom recovery. Also you can install your preferred Kernel if you don't like the stock one.
If you do not get the Allow Deny message the root was not completed successfully. do a factory reset and try again the same steps.
see images attached as proof.
Well, I installed V20 C via doktornotor method but couldn root it by flashing the signed su binary via recovery.
So I tried the above mentioned method and it worked. But every time the Superuser Force closes and its too buggy.. Any solutions. ?
Yes, same here, i tried doktornotor's method both 20C and 20G and didnt work, this Super1click works but su force closes everytime Any ideeas??
====================EDIT============================
I managed to root gingerbread with doktornotor's method V20g
Just use his image, BUT dont use su-2.3.6.3-cd-signed.zip
Download from here http://forum.xda-developers.com/showthread.php?t=1110733 su-2.3.6.2-efgh-signed.zip and install it wia clockworkmod recovery zip installer and works like a charm
omfg! plz make Zroot for 2.3.3
g0mezz said:
Hi guys, regarding the problem about rooting the original GB, it can be done, and it's not that complicated.
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20G GB ROM.
2. if you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse, after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Connect the phone to the PC with Debugging mode (Enter the phone settings menu, to the Development and tick the USB debugging mode)
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf,
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF wait until it will appear in the window again Starting ADB server..., after that,
b. Turn USB Debugging ON, and after this trick it will start rooting.
This is the method that i did twice and it worked like a charm.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it. Also update busybox. After this you have root access and you can install a custom recovery. Also you can install your preferred Kernel if you don't like the stock one.
If you do not get the Allow Deny message the root was not completed successfully. do a factory reset and try again the same steps.
Click to expand...
Click to collapse
this also works for rooting v20e european P500 gingerbread rom, so many ppl have asked about this, ffs cannot believe how a small thing can make such a diff
g0mezz said:
echo 1 > /data/local/lge_adb.conf,
Click to expand...
Click to collapse
Should I type the comma at the end on cmd? Can you please explain what exactly the above command does? Does it create the above file on the above filepath on device? If I typed both
echo 1 > /data/local/lge_adb.conf
and
echo 1 > /data/local/lge_adb.conf,
should I erase one of these files?
Without comma.
Help me for rooting Indian V20c LGP500
g0mezz said:
Hi guys, regarding the problem about rooting the original GB, it can be done, and it's not that complicated.
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20G GB ROM.
2. if you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse, after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Connect the phone to the PC with Debugging mode (Enter the phone settings menu, to the Development and tick the USB debugging mode)
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (after this command you should see your device id)
adb shell
echo 1 > /data/local/lge_adb.conf,
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF wait until it will appear in the window again Starting ADB server..., after that,
b. Turn USB Debugging ON, and after this trick it will start rooting.
This is the method that i did twice and it worked like a charm.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it. Also update busybox. After this you have root access and you can install a custom recovery. Also you can install your preferred Kernel if you don't like the stock one.
If you do not get the Allow Deny message the root was not completed successfully. do a factory reset and try again the same steps.
Click to expand...
Click to collapse
Hi,
Actually I want root my LG Optimus One .I have INDIA phone with official V20c Rom. Can anybody help me how to root my phone without any risk of bricking it. I have also read many thread about rooting 2.3.3 through super one click {like this one h**p://forum.xda-developers.com/showthread.php?t=1200167} but people were saying something about force close errors... So can anybody provide me a successful and error free method of rooting it. and Please also share me the method to unroot it.
Thanks in advance.
I've read in a topic that I can't find, that after rooting usb debugging should always be on and disabling it could cause problems. I can't remember what kind of problems. Is that true? Should I keep it enabled?
Ok im pretty sure my phone is rooted coz it said in the superuser log root-allowed so yes thnx for helping me root my phone, now install custom recovery bla blah and then rom install
Which Drivers? From where?
[QUOTE=
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
Thanks for the post. But i want to know which drivers? People like me do not know about this so please help. I can connect my phone via usb as i downloaded lg support tool and it installed the driver or drivers. Is that enough?
Awaiting response desperately as i am eager to root now, thanks a lot.
As Lg optimus net have not proper section and as it is successor of o1. I think its right place to post this thread.
After searching and trying many forums over 2-3weeks i m able to root my phone successfully. As there is not a single forum here to root this phone i want to make one, to help those searching for this.
i thanks to "g0mezz " whose method for rooting another phone worked for mine too
First of all there are a couple of things that you have to consider before starting to root.
1. Be sure that you have installed the original V20B o v10c version software on rom. I have tested on these two.
2. If you have it installed and tried different methods to root on it do a factory reset before trying this one.
3. Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them.
4. Download SuperOneClickv1.9.5-ShortFuse or later version( i used 1.9.5) , after download extract the files into a folder with the same name as the archive.
5. After you extracted the files, go to C:\Windows\System32 and copy the cmd.exe to the ADB folder where you extracted the files, in my case C:\Users\myuser\Desktop\SuperOneClickv1.9.5-ShortFuse\ADB.
6. Enable USB Debugging mode (Enter the phone settings menu>Application> Development and tick the USB debugging mode) and then connect phone to pc via usb cable. (DONT PRESS USB STORAGE) .
7. right click on cmd.exe from the ADB folder, Run as administrator, than write:
adb devices (press enter)(after this command you should see your device id)
adb shell (press enter) (after this command you should see $)
$ echo 1 > /data/local/lge_adb.conf, (press enter)
Do not close the window, live it like that.
8. Start SuperOneClick.exe, leave the settings to the SuperOneClick as they are when it opens, click on ROOT and wait, it will say Starting ADB server..., than it will do it's job and than it will appear Waiting for device... it will say ok and that if it freezes while running psneuter do the following:
a. Turn USB Debugging OFF(DO NOT DISCONNECT CABLE) wait until it will appear in the window again Starting ADB server... after that
b. Turn USB Debugging ON and after this trick it will start rooting.
After this it will ask you to reboot the phone, DO NOT FORGET, and after the reboot click on the SuperUser icon in the phone's menu. it will aks you if you allow or deny it's access. click allow. After this you must connect to the internet via Wireless or a apn, click on the superuser icon again if you exit it, go to settings, scroll down and you will see Su Binary v.XXXX, click on that to update it, than go to market and search the super user app and update it.
Also update busy box.
IF this doesn't work do a factory reset and again repeat these steps.
if this guide works for you do post replies and ...... dont forget to press thanks button
Doesn't seem 2 work. Keeps getting stuck at the point "Running psneuter" and gets stuck. Tried closing debugging and all that but it still gets stuck. Reset it 3 times still no result.
---------- Post added at 02:38 AM ---------- Previous post was at 02:13 AM ----------
Did it!! Yes!! For those who might not be able its very important that in the cmd u write like this:
adb shell (enter)
$ echo 1 > /data/local/lge_adb.conf
Give the exact spaces!! And it worked!!! (Space between echo 1 > /data ... like that)
Chowder93 said:
Doesn't seem 2 work. Keeps getting stuck at the point "Running psneuter" and gets stuck. Tried closing debugging and all that but it still gets stuck. Reset it 3 times still no result.
---------- Post added at 02:38 AM ---------- Previous post was at 02:13 AM ----------
Did it!! Yes!! For those who might not be able its very important that in the cmd u write like this:
adb shell (enter)
$ echo 1 > /data/local/lge_adb.conf
Give the exact spaces!! And it worked!!! (Space between echo 1 > /data ... like that)
Click to expand...
Click to collapse
Yep you have to follow these instruction correctly i have metioned these spaces so .. if u r having problem rooting by this method afrer following these steps correctly then rply.. and also post your rply if u successfully rooted using this....
.
thanks for the guide...i did it...but there is one thing i needed most..this so called tun.ko module to be needed in connecting vpn..is there any one have tried this???
Did u install any custom roms?
Sent from my Optimus Net using XDA Premium.
vicfirth_23 said:
thanks for the guide...i did it...but there is one thing i needed most..this so called tun.ko module to be needed in connecting vpn..is there any one have tried this???
Click to expand...
Click to collapse
no i didnt tried it.....
Chowder93 said:
Did u install any custom roms?
Sent from my Optimus Net using XDA Premium.
Click to expand...
Click to collapse
i didnt find any cw mod recovery for this phone so i didnt tried to install any other rom... but i think cwm recovery of optimus one will also work for this phone... i will try it later on...
I haven't tried installing custom roms in my phone.. some forums said that cfw have stock tun.ko module, a module needed to run the vpn application.
I saw a optimus net CWM installation process.
Sent from my Optimus Net using XDA Premium.
Found it:
http://forum.xda-developers.com/showthread.php?t=1354387
Sent from my Optimus Net using XDA Premium.
still waiting for any feedbacks thanks to TS
LlewoR said:
still waiting for any feedbacks thanks to TS
Click to expand...
Click to collapse
It worked man!! It worked on mine
What exactly is meant by
"Be absolutely sure that you have all the drives installed when working with the phone in USB debugging mode, if not install them."
It means the adb drivers.
is there any development on this like custom rom?im planning to root my phone using this method
is there any development on this like custom rom?im planning to root my phone using this method
Click to expand...
Click to collapse
Yep! There are Custom Roms. I have already flashed one
You Can find em here:-
http://www.androidworld.it/forum/lg-optimus-net-p690-187/
There are only a few but there will be more soon.
thanks for reply mate
thank you sir it works
Did It work??
Chowder93 said:
Did It work??
Click to expand...
Click to collapse
chowder where did you get you custom rom and kernel?maybe you can share it too and its that the best rom for you?thanks in advance
please do keep in touch with this thread hehehe
HI. i am opening these post for people like me that the have the same chineese pad and they cant root it.
I have try to root it with any method but with no succed.
(adb command, z4root, universal root, gingerbreak,oneclick)
at oneclick and adb tablet no recognized as usb. the first thing that i do, is to change the usb drivers with the usb googles drivers.Than oneclick it found it as rooted!but when i press to root it again i had many errors.
i upload a image with device info that i grap form adb
i am start to thinking that they put some protect that we cant have access at the rom. i use root explore r/o its highlight.its give mt the permissionto delete apk from system./app but later i can find them inside. at the info of taach u can see that device is rooted!
anyway. i found a firmware update but i havent test it yet
same issue here
Hi. I too tried to root this chinese pad (Flytouch 6) but unable to. Also I was trying to update the ROM with HoneyComb but unable to. ANy help is appreciated.
Thanks. Mounesh.
mounesh25 said:
Hi. I too tried to root this chinese pad (Flytouch 6) but unable to. Also I was trying to update the ROM with HoneyComb but unable to. ANy help is appreciated.
Thanks. Mounesh.
Click to expand...
Click to collapse
Hi my mate. i have found 2 updates i have test one only and i succed to update it.
these is from another forum:
<<ok new download link for firmware update http://www.multiupload.com/5DI5AAL5BQ
i have found a issue with it when you go into android market because this as the latest android market apk it will let you download games etc free and paid but on some it comes up not enough memory,but i noticed by going into settings and clearing google framework and shutting down tablet a few times it allowed me to download a lot more i have put a earlier android market apk on which works perfect,but when i shut down tablet it goes back to newest android market apk?so if you know of a way to delete the android market apk on the tablet let me know?
////////////////////////////////////////////////////
please note before you start you must have your tablet charging with tablet charger otherwise it will not let you put firmware on tablet
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
the way of flash the firmware of v10
sd-card into tablet while turned off
1,press the "menu"+""power"ON button at the same time
2.release the “power” after the boot up.and keep holding menu
3.pls release the "menu" after the there is a flash firmware picture with a android holding a brown bag/box
4. then you will have to do some scrolling with these buttons
5 function of the button front of the device is page up
6 function of the button of "meun" is page down
7 function of the button of "Home" is confirmation (to install firmware)
you will have to scroll to install from sd-card then press home button
you will have to scroll to your firmware them press home button to install
if you ever need to reflash or restart your tablet for any reason you can do this by holding the the on button and menu?which will allow you to reload firmware etc >>
motherofallbattles thanks a lot
chriskleov said:
the first thing that i do, is to change the usb drivers with the usb googles drivers.Than oneclick it found it as rooted!but when i press to root it again i had many errors.
i upload a image with device info that i grap form adb
i am start to thinking that they put some protect that we cant have access at the rom. i use root explore r/o its highlight.its give mt the permissionto delete apk from system./app but later i can find them inside. at the info of taach u can see that device is rooted!
anyway. i found a firmware update but i havent test it yet
Click to expand...
Click to collapse
I am confused as to what USB drivers you used to get the PC to recognize the FlyTouch...can you please provide a download link to these USB drivers you used? I am trying to get my device rooted as well. Thanks.
Thanks for the update
Hi Cheklov,
I did manager to update the firmware using your given link and instructions.
Thanks mate.
BTW...is there a way I can update to honeycomb version?
I've downloaded a few HC versions meant for other tablets like WMT, HTC etc..but no way could I update. Any instructions and link is appreciated.
Thx, Mounesh.
flytouch5.user said:
I am confused as to what USB drivers you used to get the PC to recognize the FlyTouch...can you please provide a download link to these USB drivers you used? I am trying to get my device rooted as well. Thanks.
Click to expand...
Click to collapse
to change the drivers of wopad go to devices and printers.there you will find it as usb storage.there press right click.then hit at the 2nd tab and then prpoerties.chancge manual the drivers.
http://www.megaupload.com/?d=JA6F5VS6
mounesh25 said:
Hi Cheklov,
I did manager to update the firmware using your given link and instructions.
Thanks mate.
BTW...is there a way I can update to honeycomb version?
I've downloaded a few HC versions meant for other tablets like WMT, HTC etc..but no way could I update. Any instructions and link is appreciated.
Thx, Mounesh.
Click to expand...
Click to collapse
i have no idea for custom rom.i think its to early..the chinese pad its to new...no one havent succed to root it.
I ROOT IT!!!!!
FINALY I SUCCED TO ROOT IT!!!
i succed by adb cmds!!
ADB root
ADB shell mount -o remount,rw /system
ADB push su-3.0.3.2-efghi-signed /system/xbin/su
ADB push su-3.0.3.2-efghi-signed /bin/su
ADB shell chown 0.0 /bin/su
ADB shell chmod 04755 /bin/su
ADB shell chown 0.0 /system/xbin/su
ADB shell chmod 04755 /system/xbin/su
ADB shell mount -o remount,ro /system
ADB install -r Superuser-3.0.7-efghi-signed.apk
reboot UNISTALL superuser.apk and INSTALL IT again!
@chriskleov can you tel me more about this updates?
is there update to android 3.0 or higher?
USB OTG control problem
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
wipe data then
try to reflash the upadate
and then aagain wipe
done that
Ive already done that. But result is same.
anyone can help?
mounesh25 said:
Ive already done that. But result is same.
anyone can help?
Click to expand...
Click to collapse
http://www.apad.tv/apadforum/list.php?category/46-Flytouch-5-Wopad-Firmware
Who can tell me why the Navionics Marine 2.1 crashes (force close) after hitting "i agree" in the beginning? Your help would be highly appreciated!
USB problem
hi all
I.ve updated with the file from the above post and noe I have the same problem with the usb
force close - no way to connect to PC
please help
You can try this method to root, it is for another similar vimicro device:
Q: How to root the Haipad M8?
A: You need the GingerBreak and some manual work.
You need to have an installed Android SDK with adb.exe or take this archive with adb.exe only. And you need to have a modified USB driver.
Connect the Haipad M8 to the PC (USB OTG). You will have to install modified USB driver if it is needed.
"USB debugging mode" must be enabled in the device.
Run the cmd.exe and go to a directory where the adb.exe is located (for example: cd d:\adb)
Run command:
Code:
adb root
adb shell
must be # in the prompt (root mode)
Code:
cd /bin
check a symlink su
Code:
ls -l --color=never su
"su -> busybox" is not right. Delete the symlink su
Code:
rm ./su
Install the Gingerbreak and root device.
Install the RootCheker and check the root.
Instructions taken from here: http://www.chinadigitalcomm.com/haipad-m8-vimicro-vc882-t10830.html
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
Can you try to install the attached package and see how it goes. Just confirm you want to replace the existing version. It worked for me.
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
Go to system/app
find usbcontrol.apk
install it
you get a fault (not installed)
after that it works agian
hey!
I found this:
blog.mcbub.com/index.php/tablet-pc/10-2-zenithink-c91-android-4-0-firmware-update-guide-beta-version
Do you think it would work on superpad? Because in guess that zenithink is kind of same thing like superpad m I wrong?
czy86 said:
I found this:
blog.mcbub.com/index.php/tablet-pc/10-2-zenithink-c91-android-4-0-firmware-update-guide-beta-version
Do you think it would work on superpad? Because in guess that zenithink is kind of same thing like superpad m I wrong?
Click to expand...
Click to collapse
I don't know but would be nice!
Hi i'm having a problem trying to get my evo shift Perm Rooted. There's like 4 different guides that i've found on how To root an Evo or even more specifically the Shift. I've followed all these guides and still no luck.
I already have my phone Temp Rooted through VISIONary, my problem happens when I have to go to the CMB (Command Prompt)
8. Next, Open the command prompt (Start > Run > type "cmd") and paste the following...
Code:
cd C:\AndroidSDK\platform-tools
Hit enter, and type the following...
Code:
adb
If adb runs you're golden. Type this...
Code:
adb shell
Hit enter, you will see this...
Code:
$
Now type...
Code:
su
I make it to where I need to type in adb shell and what it says is adb server is out of date. killing... *daemon started successfully*
Then it shows the $ sign.
What i'm supposed to do now is type su
Then when I do it says su: permission denied
This is where i'm lost at. I followed everybody's instructions perfectly but cant move on till I get pass this... Can anyone help me please?
Thank you
What Android version are you on?
2.2 ?
2.3.3 ?
2.3.4 ?
Check the permissions under properties of adb.exe (right-click adb.exe and select properties) in your sdk/platform-tools folder. Make sure it is allowed to run as a program.
prboy1969 said:
What Android version are you on?
2.2 ?
2.3.3 ?
2.3.4 ?
Click to expand...
Click to collapse
2.2
Is that good or bad? Should I upgrade?
sparksco said:
Check the permissions under properties of adb.exe (right-click adb.exe and select properties) in your sdk/platform-tools folder. Make sure it is allowed to run as a program.
Click to expand...
Click to collapse
I have a Windows XP So when I go to properties the best I can do is Run it as an older version in compatibility mode? I'll still try it out to see if any older version works
*edit, tried and didnt work
tmb04 said:
2.2
Is that good or bad? Should I upgrade?
Click to expand...
Click to collapse
NO DO NOT UPGRADE!!! If your on 2.2 it's very easy. Just download and use THIS TOOL. It will do it all for you. Just connect the device via USB Cable, and choose charge only. Extract the Zip file that you downloaded onto your desktop, and run the program. Then click the ROOT Button. Make sure your Anti-Virus and Firewall are disabled before you start. Then just follow the Prompts. When it's all done go to the Play Store ( Android Market ) download Rom Manager Free. Open up Rom Manager follow the prompts to Flash CWM Recovery. That's it your Rooted with a Custom Recovery.
prboy1969 said:
NO DO NOT UPGRADE!!! If your on 2.2 it's very easy. Just download and use THIS TOOL. It will do it all for you. Just connect the device via USB Cable, and choose charge only. Extract the Zip file that you downloaded onto your desktop, and run the program. Then click the ROOT Button. Make sure your Anti-Virus and Firewall are disabled before you start. Then just follow the Prompts. When it's all done go to the Play Store ( Android Market ) download Rom Manager Free. Open up Rom Manager follow the prompts to Flash CWM Recovery. That's it your Rooted with a Custom Recovery.
Click to expand...
Click to collapse
I downloaded what you said, I run the program and disable the firewall, I clicked on Root and it says "Error running ADB try again"
I know that means I probably did something wrong in an earlier step but still unaware where I messed up at.
tmb04 said:
I downloaded what you said, I run the program and disable the firewall, I clicked on Root and it says "Error running ADB try again"
I know that means I probably did something wrong in an earlier step but still unaware where I messed up at.
Click to expand...
Click to collapse
You need adb working... In order for adb to work you need to have android debugging checked under Settings > Applications > Development on your phone. It's not enabled by default on Sense roms so you'll need to make sure it's enabled and turned on.
Ok I made it past the part I was stuck at. Rooted my phone, downloaded ROM manager, clicked on Flash ClockworkMod Recovery, and before it finishes it says " An error occurred while attempting to run privileged commands! "
I'm sorry for asking for so much help but I'm not trying to mess anything up
tmb04 said:
Ok I made it past the part I was stuck at. Rooted my phone, downloaded ROM manager, clicked on Flash ClockworkMod Recovery, and before it finishes it says " An error occurred while attempting to run privileged commands! "
I'm sorry for asking for so much help but I'm not trying to mess anything up
Click to expand...
Click to collapse
All good about asking questions. When the message pops up asking for SuperUser Permission, you have to click yes. Otherwise it will not run.
I ended up factory restoring my phone and followed a youtube video for the same exact guide that you told me to use. I followed it step by step and now my phone works perfect. I appreciate all the help.
Instead of me creating a new post, can you recommend a good guide for me to flash my shift to boost mobile?
tmb04 said:
I ended up factory restoring my phone and followed a youtube video for the same exact guide that you told me to use. I followed it step by step and now my phone works perfect. I appreciate all the help.
Instead of me creating a new post, can you recommend a good guide for me to flash my shift to boost mobile?
Click to expand...
Click to collapse
You should be able to find to find the info you need HERE.
Unfortunately I could not find a guide on the bluboo s8 root. anyone help me?
Help to root and change launcher.
That would be awesome. Also, can anyone tell me how to change the launcher? It seems it's protected and I cannot use Nova by defect. Always the factory one comes back.
Thanks in advance...
I tried kingroot but it failed. The bluboo's s8 360 os is a little bit anoying. Especialy the big icons and screen size. A root will make te phone worth buying it. now its just a phone my moms woud like. (Maybe thats a compliment.)
i tryed by: Rootkhp Pro not function
kingroot not function
root genius not function
one click root nothing !!
any news ?
I do not understand the language, maybe that helps
https://4pda.ru/forum/index.php?showtopic=831334&st=1960#entry65454219
I don't have my hands on mine yet (Monday Oct 2nd)so I can't say one way or the other if this will work but I found that the Bluboo Maya uses the same 360 GUI and there is program called rootkhp.pro (i would post a link but it wont let me) that can root that phone so maybe let cross reference anything that can root the bluboo Maya and it may give us some solid leads into rooting the S8 so anyone know anything about the Maya or that rootkhp program I opened it up and seem to be running on my ubuntu desktop I'm going threw the code and from what seen in other root programs it looking very run of the mill. Anyone know of any other phones running this 360 OS?
Probably, your boot loader is locked.
Please take a backup of ur data before proceeding further.
Try this,
Download adb and Koush Universal adb driver and install them on ur pc, always install the driver first and don't install the drivers adb setup asks u to install.
Run command prompt as administrator.
Open the folder in c drive where adb is installed, u can use file explorer for this.
Press Shift+right click and select open command window here.
Enable USB debugging on your phone and connect it to the pc by a USB cord.
Enter command "adb devices" without quotation marks.
If it shows some device connected, only then proceed further.
Enter command " adb reboot bootloader"
Enter command " fastboot devices", if it shows some device to be connected, only then proceed further.
Enter command " fastboot oem unlock".
Ur phone may then ask for final confirmation on the phone screen, select yes.
When procedure completes, type "fastboot reboot" and ur phone will reboot.
U can now use Kingoroot or any other tool for rooting.
Augustoandro said:
Probably, your boot loader is locked.
Please take a backup of ur data before proceeding further.
Try this,
Download adb and Koush Universal adb driver and install them on ur pc, always install the driver first and don't install the drivers adb setup asks u to install.
Run command prompt as administrator.
Open the folder in c drive where adb is installed, u can use file explorer for this.
Press Shift+right click and select open command window here.
Enable USB debugging on your phone and connect it to the pc by a USB cord.
Enter command "adb devices" without quotation marks.
If it shows some device connected, only then proceed further.
Enter command " adb reboot bootloader"
Enter command " fastboot devices", if it shows some device to be connected, only then proceed further.
Enter command " fastboot oem unlock".
Ur phone may then ask for final confirmation on the phone screen, select yes.
When procedure completes, type "fastboot reboot" and ur phone will reboot.
U can now use Kingoroot or any other tool for rooting.
Click to expand...
Click to collapse
I can open bootloader, but when my phone in fastboot mode not detected in PC.
any solution ?
Here trick for change homescreen.
Install Apus Launcher - Apus Setting - Set as default launcher - choose your launcher
it work for me, but just temporary. after you restart your phone, you must do this again.
Your guide do not function, beacuse when unlock bootloader do not recognize the phone
Finally Bluboo S8 Rooted
evoin said:
That would be awesome. Also, can anyone tell me how to change the launcher? It seems it's protected and I cannot use Nova by defect. Always the factory one comes back.
Thanks in advance...
Click to expand...
Click to collapse
Here Check my thread, i was find a way to root Bluboo S8
https://forum.xda-developers.com/general/rooting-roms/guide-root-bluboo-s8-systemless-root-t3682560
prydmus said:
Here Check my thread, i was find a way to root Bluboo S8
https://forum.xda-developers.com/general/rooting-roms/guide-root-bluboo-s8-systemless-root-t3682560
Click to expand...
Click to collapse
This method works! MY GOOGLE NOW LAUNCHER FINALLY IS THERE! After rooting my Bluboo S8 I installed app for uninstalling system aps, you have to uninstall "Initiator", then after rebooting you can choose between launchers installed on your phone!
thanks it works perfect
Didn't work for me. How did you guys do it? Did you use an old version of SP flash tool or did you use a different OS cause I am using windows 10.
EDIT:
I also used arch linux and get the same error which is something about a preloader invalid or something.
Dont work for me
Dont work in my phone.
BROM ERROR: STAUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
Edit: I access to the phone via USB without problems. Also install Windows_10_MTK_VCOM_USB_Preloader_Drivers. And the USB is in debugging mode.
Probed all usb ports of my computer. Same error all times.
Some problem the procedure don t work
BROM ERROR: STAUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
In this procedure di not specific if debug USB is enable? And the bootloader in the developement menù. Please post a video o a detailed procedure thanks
No Root Needed
Hey guys, I managed to mimic most of the features of Galaxy s8 without rooting bluboo s8..
Check this video.,,
Transform Bluboo s8 to Samsung s8 by "Perfectionist Ashmi" in youtube..
I can't able to post links in this thread...
hope it helps...
Bluboo S8 launcher change - No root
Hi
Woukd like to share a way to switch Bluboo S8 launcher to another one.
1. On Google Play store, download and install iLauncher X or S+ Launcher
2. Start iLauncher X and goto Preferences icon.
3. You will see an button called "set as default". Swipe it ON and you will be able to select any launcher installed in your Bluboo S8 and set it as default.
Seems to work with S+ Launcher as well.
This works but does not survive to reboot.
Hope this helps.
Lila.
any of you tried to install magisk? because i tried it with flashify but it does not work.
And busybox do not install , this type of root is limited for me.
Check the video for Transforming bluboo S8 to Samsung s8 exactly.!!! By using launchers and No ROOT
[https://youtu.be/IDjrEsk468Y]
Hope it helps .!! Good day .!!
Remove [ and ] from the above link