Database Info

[Q]Help: Can't change custom rom

Hi,
I am new to this site and fairly new to rooting and stuff and need assistance with my Sony Xperia S (LT26i). If i am not in the right pace for this please point me in the right direction. I have installed a custom rom and custom recovery which let me upgrade from 4.1.2 to 4.3 which was working fine then when I flashed a different custom rom after that to get 4.4.1 I lost access to my custom recovery. The main issue is that I need help with changing the custom rom I have installed, for some reason I can no longer boot into TWRP or CWM (using power + vol up), the phone simply boots normally and skips the whole process therefore I cannot flash anything. I have looked for hours over the net on how to get into recovery but could not find a solution.
I also assumed that when installing custom recovery and custom roms that you would need to be rooted but when I check with Root Checker it says that I am not. So any assistance would be great

Bizzmagizz said:
Hi,
I am new to this site and fairly new to rooting and stuff and need assistance with my Sony Xperia S (LT26i). If i am not in the right pace for this please point me in the right direction. I have installed a custom rom and custom recovery which let me upgrade from 4.1.2 to 4.3 which was working fine then when I flashed a different custom rom after that to get 4.4.1 I lost access to my custom recovery. The main issue is that I need help with changing the custom rom I have installed, for some reason I can no longer boot into TWRP or CWM (using power + vol up), the phone simply boots normally and skips the whole process therefore I cannot flash anything. I have looked for hours over the net on how to get into recovery but could not find a solution.
I also assumed that when installing custom recovery and custom roms that you would need to be rooted but when I check with Root Checker it says that I am not. So any assistance would be great
Click to expand...
Click to collapse
try to root again or if it wont work, back to stock and start from begining

Paget96 said:
try to root again or if it wont work, back to stock and start from begining
Click to expand...
Click to collapse
Thanks for the feedback, because I am quite new to this stuff can you tell me what the best and easiest way to root the phone is? I have tried the root toolkit but it wont work with my rom i have atm. I cant access my recovery either so how would I go about getting back to stock rom?

Bizzmagizz said:
Thanks for the feedback, because I am quite new to this stuff can you tell me what the best and easiest way to root the phone is? I have tried the root toolkit but it wont work with my rom i have atm. I cant access my recovery either so how would I go about getting back to stock rom?
Click to expand...
Click to collapse
you have all here
follow this,and back to stock, then root again, install cwm or twrp recovery, and install what ever you want
http://xperiafirmware.com/8-firmware/13-sony-xperia-s-lt26

Do you know of any other site where I can get the firmware from?, when I try and extract the file after I download it it's corrupted. I have tried multiple times with no luck.

Bizzmagizz said:
Do you know of any other site where I can get the firmware from?, when I try and extract the file after I download it it's corrupted. I have tried multiple times with no luck.
Click to expand...
Click to collapse
witch android do you want?
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
Here is 4.0.4
https://docs.google.com/file/d/0B_d8uWGbkaetLThpYzEwZUh5aTg/edit
steps:
how to install the newest Android 4.0.4 for Sony XPERIA S LT26i
a) first of all, check your firmware version (if you already have the newest one, you do not need this tutorial)
b) download and install latest Flashtool from here (mirrors Google Drive or Mega)
c) download also latest Android 4.0.4 (mirror) for Sony XPERIA S LT26i
d) paste the ftf file downloaded in step c) to folder „Firmware“ included in the XPERIA Flashtool
e) open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
f) turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button
g) after few minutes all is done and your phone gets the new firmware
Here you got 3 ways to update good luck
http://androidteen.com/xperia-s-lt26i-update-to-android-4-1-2-jelly-bean-official-firmware-6-2-b-1-96/

Ok so I successfully downloaded the firmware file but I got an error when using the flash tool, I have attached the log if you can maybe help me out with what went wrong.

Bizzmagizz said:
Ok so I successfully downloaded the firmware file but I got an error when using the flash tool, I have attached the log if you can maybe help me out with what went wrong.
Click to expand...
Click to collapse
The clue's in the error message - you don't have the required drivers installed.
There's a directory named "drivers" under the main flashtool dir. Run flashtool-drivers.exe and install the appropriate drivers. I think "Common Drivers Viskan Board" is the one you need. I ended up installing all of them to get it to flash (which took ages).

Ok so I got it to work, all I had to do was hold down the vulumn down button for like an extra 5 seconds while it began to flash
Thanks for the help, I appreciate it

Bizzmagizz said:
Ok so I got it to work, all I had to do was hold down the vulumn down button for like an extra 5 seconds while it began to flash
Thanks for the help, I appreciate it
Click to expand...
Click to collapse
work??
dont forget to press thanks

Hello again
So I have successfully rooted the device and installed TWRP but as before I cannot seem to get into the recovery mode, when I boot the phone with "power and vol +" it doesn't boot into recovery but instead there is a quick glimpse of what I think is the recovery mode (I cant actually see it but something happens for a split second) but it flashes past way too fast then goes to the normal Sony logo and continues booting normally. I have tried this like at least 20 times in the last 2 weeks and have researched other ways to boot into recovery but I can't seem to find anyone with an answer. Do you know what could fix this? Or is there a way to boot into recovery using a computer?

Bizzmagizz said:
Hello again
So I have successfully rooted the device and installed TWRP but as before I cannot seem to get into the recovery mode, when I boot the phone with "power and vol +" it doesn't boot into recovery but instead there is a quick glimpse of what I think is the recovery mode (I cant actually see it but something happens for a split second) but it flashes past way too fast then goes to the normal Sony logo and continues booting normally. I have tried this like at least 20 times in the last 2 weeks and have researched other ways to boot into recovery but I can't seem to find anyone with an answer. Do you know what could fix this? Or is there a way to boot into recovery using a computer?
Click to expand...
Click to collapse
use this to reboot into recovery
ang go to reply, because I dont see you post
https://play.google.com/store/apps/details?id=pl.qbanin.reboot

[Q] Freezing phone

hello,
I need help with restoring phone that freezes on startup after leaving the recovery mode. The screen is still just google the words and not in recovery mode install rom. The PC I roolkit Nexus 1.8.6, but I can not install ROM or here, or make boot recovery. I feel like I pulled something Toolkit and thus got ourselves tonight. The phone is unlocked and listening. ROM was 4.4.4 cm hammerhead KTU84P.
Advance thanks for the tip on how to start. M

First of all don't use toolkits. Download the factory images from google and flash those via fastboot. Look at my signature for steps/guides!

After rooting my nexus 5 is not booting up with non stop booting animation

I have a nexus 5 16 GB and i downloaded the recent software update android 6.0.1 and then I decided to root and I used 'Nexus root toolkit v2.06' and first unlocked the bootloader and then rooted. Everything worked fine but after the process was complete it was rebooting and the booting animation went on and on for many hours and the device did not root. I really don't know what's going on. My purpose is to install a custom rom: cyanogenmod 12. Now what should I do ???? PLEASE HELP. When i try to enter recovery mode it shows a picture of the android mascot with opened back and exclamation and cannot enter command as well. and after some time the booting animation begins and goes on and on...
please help...

nexus_5_ said:
I have a nexus 5 16 GB and i downloaded the recent software update android 6.0.1 and then I decided to root and I used 'Nexus root toolkit v2.06' and first unlocked the bootloader and then rooted. Everything worked fine but after the process was complete it was rebooting and the booting animation went on and on for many hours and the device did not root. I really don't know what's going on. My purpose is to install a custom rom: cyanogenmod 12. Now what should I do ???? PLEASE HELP. When i try to enter recovery mode it shows a picture of the android mascot with opened back and exclamation and cannot enter command as well. and after some time the booting animation begins and goes on and on...
please help...
Click to expand...
Click to collapse
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally

funnel71 said:
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
Click to expand...
Click to collapse
Thank you very much for the reply, I really do have no idea as to how to flash the factory image because i am very new in this area. Could you please recommend software and which factory image i should download, please ?? thanks very much.
:good:

funnel71 said:
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
Click to expand...
Click to collapse
Also, you mentioned a 'special kernel' what does that mean. All i want to do to my device is install cyanogenmod 12 and for that i believe it needs to be rooted, so i am really confused. What should I do know

I'm having this same problem, and unfortunately, when I start the phone on fastboot, I can not access the recovery mode in order to upload a factory image of nexus 5.
I used the new tool available her for quick flash, and now, I don't have a phone.

First, don't panic. Your phone is still very easy to recover. Unfortunately I can't get you a complete walkthrough here (for now at least), so I'll give you the main idea and you'll have to do your homework (as maybe you should have done before).
1. You need to get fastboot working on your computer. It's included in the Android sdk package, but there might be some easier way to get it. Google it. You might need drivers for your pc too. Google it as well.
2. Then you need to get into fastboot mode on your phone. To do it, hold down power button AND volume down button until it gets into fastboot mode. You will see an android on his back with the cover open. At this point, connect your phone to your pc, open a terminal on your pc and type "fastboot devices" without the quotes "". It should find your phone if fastboot is working. If it doesn't work go back to step 1.
3. Download TWRP recovery on your pc and place the img file in the same folder as your fastboot executable (not mandatory but easier). It can be found here https://dl.twrp.me/hammerhead/
4. Always in fastboot mode, type "fastboot flash recovery twrp-2.8.7.1-hammerhead.img" assuming you downloaded that file, which you should have by the way. It should install fine. If you haven't placed the file in the same directory as your fastboot executable, you will need to provide the path to your img file as well.
5. Then use the volume rocker to switch between modes and choose reboot recovery.
6. You should now be in TWRP recovery. At this point, download a custom kernel (anyone found on xda for hammerhead should do) and push it to your phone. It should be fairly simple with TWRP. Then flash your new kernel using install. It should help you get your phone booting normally. Alternatively, you can download a custom ROM like cm12.1 and flash it altogether. It will install everything needed for your phone to boot up too. Beware if flashing a ROM though, I strongly advice you to do a factory reset before flashing it. You will find that option in the wipe menu.
Hope it helps, let me know if you need further assistance.

Yesterday, I have tried everything to have my computer to recognize the "fastboot" command, and I installed like 2 or 3 different programs for that. With my old Windows 7, I have been able to push a flashed image to fix this issue, using the fastboot command, but with Windows 10, it's always telling me it's not a valid command. I'll keep trying it, otherwise, i'll have to "resurrect" my old Windows XP computer.
Also, I noticed now that, while trying to install the fastboot, as per some files that I could download, but no file has been copied into my computer, not even if I run it as admin.

fixed. but no RECOVERY mode options....
Hi Guys,
Thank you very much for the help, I have finally recovered the phone and running android 6.0 MRA58N but it is not rooted. Now if you don't mind could you teach me how to root because i have checked lots of videos and tuts but none worked for me...
IMPORTANT:
when i am in recovery mode why cannot I access options even when i press volume up + power button and release them at the same time...????
Thanks in advance.

Just flash a custom recovery via fastboot. Just make sure your bootloader is unlocked. Can't link though.

hi guys i have used nexus 5 mobile with cyanogenmod 14.1 .It worked properly in 1 year. after that suddenly switched off and it not properly boot up .i try to switch on my mobile , first it show google with unlock logo properly and when it show cyanogenmod logo it stuck and again show google with unlock logo....i try recovery mode to wipe and flash the same rom ....the process is interrupt at middle stage and again show the google..i try lots of time . after few try that process finished completely without interrupt. then use my mobile 1 day same as i used first time root. after that same problem occur on my mobile ..so help me guys

@[email protected], possible power button problem?

Need help with boot loop

I had this droid razr maxx hd a long time ago. I used to be pretty savvy with rooting and whatnot. At one point i rooted the phone enabled native tether and even unlocked the bootloader. however I never flashed a custom recovery. suddenly one day the phone started boot looping. I simply switched phones. now my new phone is broken and i need to get this boot loop fixed. trying to do a recovery simply ends up with it trying to boot again and loop. sometimes it shows the robot with "no command" under it. so thats not possible.
when i select ap fastboot i get device is unlocked status code 3.
So i should be able to flash something to it and get out of this bootloop right? can someone point me to a noob friendly tutorial to try and fix this?
if any more info is needed let me know
Thanks!

KiraTheSavior said:
I had this droid razr maxx hd a long time ago. I used to be pretty savvy with rooting and whatnot. At one point i rooted the phone enabled native tether and even unlocked the bootloader. however I never flashed a custom recovery. suddenly one day the phone started boot looping. I simply switched phones. now my new phone is broken and i need to get this boot loop fixed. trying to do a recovery simply ends up with it trying to boot again and loop. sometimes it shows the robot with "no command" under it. so thats not possible.
when i select ap fastboot i get device is unlocked status code 3.
So i should be able to flash something to it and get out of this bootloop right? can someone point me to a noob friendly tutorial to try and fix this?
if any more info is needed let me know
Thanks!
Click to expand...
Click to collapse
Did You have TWRP flashed as recovery or you running stock and were you running custom or stock rom.

OGdroidster said:
Did You have TWRP flashed as recovery or you running stock and were you running custom or stock rom.
Click to expand...
Click to collapse
I would say stock because i never flashed a custom recovery or anything. just root and unlock bootloader. and enable native wifi teather. but the restore doesnt work it just gives me the robot with "no command"

KiraTheSavior said:
I would say stock because i never flashed a custom recovery or anything. just root and unlock bootloader. and enable native wifi teather. but the restore doesnt work it just gives me the robot with "no command"
Click to expand...
Click to collapse
Just download the drivers for this device and install them. Then download and install rsd lite and install that. Then download the the stock firmware make sure it is the right one and flash it with rsd lite after that you will have to reroot the device. If you don't know what version of firmware you had just post a pic of your device while in ap fastboot bootloader and I can let you know.

OGdroidster said:
Just download the drivers for this device and install them. Then download and install rsd lite and install that. Then download the the stock firmware make sure it is the right one and flash it with rsd lite after that you will have to reroot the device. If you don't know what version of firmware you had just post a pic of your device while in ap fastboot bootloader and I can let you know.
Click to expand...
Click to collapse
Random question. is there any way to retrieve photos from the internal storage of this device with it stuck in a boot loop?

KiraTheSavior said:
Random question. is there any way to retrieve photos from the internal storage of this device with it stuck in a boot loop?
Click to expand...
Click to collapse
If you had a custom recovery that you could mount while in recovery. Have you tried adb.

SM-A750FN (Sam. a7 2018) TWRP not loading

Hello, my problem is that I flash "Twrp_3.2.3-1_a750.tar" with ODIN in order to try and root my SM-A750FN device.
After I flash it and ODIN sais PASS, I get out of download mode and immediatly enter recovery mode. At that point the teamwin logo flashes on the screen and then the phone shuts down. The phone boots up again, tries to go into recovery mode again at which point it goes into a kind of bootloop to teamwin logo and after a few tries it just stays closed, doesnt take anymore commands (dl, recovery, etc.) and starts to heat up like he is still bootlooping just doesnt show on the screen. I let the battery drain, i go into download mode and install stock firmware. I know long story.
SHORT STORY: SM-A750FN wont go into TWRP recovery, when i try to go to recovery mode it bootloops to TWRP logo. I would like to solve this in order to root it.
I specify that i have changed the firmware(rom) on the device, the original one worked with TWRP, I tried the latest firmware I could find for two separete regions and both have the same behavior.
Thanks in advance!

Re-flash the original ROM to get rid off of the failed TWRP installation.

Hello, thanks for the answear. Do you have any idea where to get the original rom from? I dont have it anymore as i din't make a back-up before flashing the ones that i got from the internet. I already tried to flash 2 stock roms from the internet and they dont seem to work with twrp.

Request it from OEM / Carrier.
BTW: It's NOT the installed ROM that doesn't work with TWRP but it's TWRP that doesn't work with installed ROM. Take note that TWRP rewrites portions of installed ROM.

I see, so I should request it from Samsung? Also thanks for you answears, i think i'll try atleast one older ROM for my phone, maybe TWRP will work with that. Thanks!