[Q] Freezing phone - Nexus 5 Q&A, Help & Troubleshooting

hello,
I need help with restoring phone that freezes on startup after leaving the recovery mode. The screen is still just google the words and not in recovery mode install rom. The PC I roolkit Nexus 1.8.6, but I can not install ROM or here, or make boot recovery. I feel like I pulled something Toolkit and thus got ourselves tonight. The phone is unlocked and listening. ROM was 4.4.4 cm hammerhead KTU84P.
Advance thanks for the tip on how to start. M

First of all don't use toolkits. Download the factory images from google and flash those via fastboot. Look at my signature for steps/guides!

Related

[Q] Rooted but still can't see recovery

I have a 9023 - 4.03. Was having the usual dark recovery screen problem. So freshly rooted my fone using the nexus hacks link on this page: http://forum.xda-developers.com/showthread.php?t=1421814
And still when I go into recovery the android logo comes and vanishes and all goes dark so cant update to 4.0.4.
Any help would be greatly appreciated.
Thanks
Have you install rom manager? And tried to reflash clockworks?
Sent from my Nexus S using XDA
Actually, I made a very stupid error. I tried to reboot and go into recovery in a normal way, instead of typing fastboot flash recovery twrp-crespo-2.0.0RC0.img in the commnad prompt and then going into recovery as instructed. Once I did that I could load the update.zip from the root and install 4.0.4
For the record, complete beginner, just followed a step by step guide and rooted to get 4.0.4. For all those worried about screwing up, if I can do it, so can you.
Cheers!

After rooting my nexus 5 is not booting up with non stop booting animation

I have a nexus 5 16 GB and i downloaded the recent software update android 6.0.1 and then I decided to root and I used 'Nexus root toolkit v2.06' and first unlocked the bootloader and then rooted. Everything worked fine but after the process was complete it was rebooting and the booting animation went on and on for many hours and the device did not root. I really don't know what's going on. My purpose is to install a custom rom: cyanogenmod 12. Now what should I do ???? PLEASE HELP. When i try to enter recovery mode it shows a picture of the android mascot with opened back and exclamation and cannot enter command as well. and after some time the booting animation begins and goes on and on...
please help...
nexus_5_ said:
I have a nexus 5 16 GB and i downloaded the recent software update android 6.0.1 and then I decided to root and I used 'Nexus root toolkit v2.06' and first unlocked the bootloader and then rooted. Everything worked fine but after the process was complete it was rebooting and the booting animation went on and on for many hours and the device did not root. I really don't know what's going on. My purpose is to install a custom rom: cyanogenmod 12. Now what should I do ???? PLEASE HELP. When i try to enter recovery mode it shows a picture of the android mascot with opened back and exclamation and cannot enter command as well. and after some time the booting animation begins and goes on and on...
please help...
Click to expand...
Click to collapse
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
funnel71 said:
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
Click to expand...
Click to collapse
Thank you very much for the reply, I really do have no idea as to how to flash the factory image because i am very new in this area. Could you please recommend software and which factory image i should download, please ?? thanks very much.
:good:
funnel71 said:
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
Click to expand...
Click to collapse
Also, you mentioned a 'special kernel' what does that mean. All i want to do to my device is install cyanogenmod 12 and for that i believe it needs to be rooted, so i am really confused. What should I do know
I'm having this same problem, and unfortunately, when I start the phone on fastboot, I can not access the recovery mode in order to upload a factory image of nexus 5.
I used the new tool available her for quick flash, and now, I don't have a phone.
First, don't panic. Your phone is still very easy to recover. Unfortunately I can't get you a complete walkthrough here (for now at least), so I'll give you the main idea and you'll have to do your homework (as maybe you should have done before).
1. You need to get fastboot working on your computer. It's included in the Android sdk package, but there might be some easier way to get it. Google it. You might need drivers for your pc too. Google it as well.
2. Then you need to get into fastboot mode on your phone. To do it, hold down power button AND volume down button until it gets into fastboot mode. You will see an android on his back with the cover open. At this point, connect your phone to your pc, open a terminal on your pc and type "fastboot devices" without the quotes "". It should find your phone if fastboot is working. If it doesn't work go back to step 1.
3. Download TWRP recovery on your pc and place the img file in the same folder as your fastboot executable (not mandatory but easier). It can be found here https://dl.twrp.me/hammerhead/
4. Always in fastboot mode, type "fastboot flash recovery twrp-2.8.7.1-hammerhead.img" assuming you downloaded that file, which you should have by the way. It should install fine. If you haven't placed the file in the same directory as your fastboot executable, you will need to provide the path to your img file as well.
5. Then use the volume rocker to switch between modes and choose reboot recovery.
6. You should now be in TWRP recovery. At this point, download a custom kernel (anyone found on xda for hammerhead should do) and push it to your phone. It should be fairly simple with TWRP. Then flash your new kernel using install. It should help you get your phone booting normally. Alternatively, you can download a custom ROM like cm12.1 and flash it altogether. It will install everything needed for your phone to boot up too. Beware if flashing a ROM though, I strongly advice you to do a factory reset before flashing it. You will find that option in the wipe menu.
Hope it helps, let me know if you need further assistance.
Yesterday, I have tried everything to have my computer to recognize the "fastboot" command, and I installed like 2 or 3 different programs for that. With my old Windows 7, I have been able to push a flashed image to fix this issue, using the fastboot command, but with Windows 10, it's always telling me it's not a valid command. I'll keep trying it, otherwise, i'll have to "resurrect" my old Windows XP computer.
Also, I noticed now that, while trying to install the fastboot, as per some files that I could download, but no file has been copied into my computer, not even if I run it as admin.
fixed. but no RECOVERY mode options....
Hi Guys,
Thank you very much for the help, I have finally recovered the phone and running android 6.0 MRA58N but it is not rooted. Now if you don't mind could you teach me how to root because i have checked lots of videos and tuts but none worked for me...
IMPORTANT:
when i am in recovery mode why cannot I access options even when i press volume up + power button and release them at the same time...????
Thanks in advance.
Just flash a custom recovery via fastboot. Just make sure your bootloader is unlocked. Can't link though.
hi guys i have used nexus 5 mobile with cyanogenmod 14.1 .It worked properly in 1 year. after that suddenly switched off and it not properly boot up .i try to switch on my mobile , first it show google with unlock logo properly and when it show cyanogenmod logo it stuck and again show google with unlock logo....i try recovery mode to wipe and flash the same rom ....the process is interrupt at middle stage and again show the google..i try lots of time . after few try that process finished completely without interrupt. then use my mobile 1 day same as i used first time root. after that same problem occur on my mobile ..so help me guys
@[email protected], possible power button problem?

I really need your help guys... Nexus 5 bricked!

I have a Nexus 5, rooted, and I tried to upgrade my Android to the latest version, which is Android 6. I have found a ROM here, on XDA, and I tried to install it, via Recovery, I have followed the instructions on the ROM page, but in the end, my phone would never boot into Android, it boots directly into Recovery Mode, and then I tried to connect my USB cable while in Recovery mode, but it does not recognize my phone, now all I have is a nexus 5 that boots directly into Recovery Mode - I must specify that, by mistake I have formatted my SD data, from Recovery Mode. I've been searching the internet for solutions, I read something about sideload install, but I don't know what's that all about, I would really appreciate your help, I need my nexus back immediatelly...
I've been playing with ROMS and things like that for a while now, and I thought I know it all you know? but it seems that, I got stucked now, and I would really appreciate your help! Thank you.
Boot into fastboot mode and flash a stock Google ROM, perform a factory reset, and re-boot
Images: https://developers.google.com/android/nexus/images?hl=en

[Completed] Moto E 1st Generation Boot Animation UNLOCKED BOOTLOADER Boot Loop Please Help!

Hi, I'm new to XDA. Sorry if I did something wrong already. But I have a problem, I tried installing a new boot animation to my moto e 1st gen (bootloader was unlocked, it was rooted too). Now whenever I turn the phone on, The WARNING BOOTLOADER UNLOCKED image shows up, but there is no boot animation. I cannot access anything, I can only go into recovery mode and CWM. I have tried factory reset using Recovery Mode (No success, just does WARNING boot loop again ) I have also tried factory reseting through CWM, till no success. I am giving up, I just recently bought this phone. NAY help would be appreciated. Thanks in advance!
rakibshahid said:
Hi, I'm new to XDA. Sorry if I did something wrong already. But I have a problem, I tried installing a new boot animation to my moto e 1st gen (bootloader was unlocked, it was rooted too). Now whenever I turn the phone on, The WARNING BOOTLOADER UNLOCKED image shows up, but there is no boot animation. I cannot access anything, I can only go into recovery mode and CWM. I have tried factory reset using Recovery Mode (No success, just does WARNING boot loop again ) I have also tried factory reseting through CWM, till no success. I am giving up, I just recently bought this phone. NAY help would be appreciated. Thanks in advance!
Click to expand...
Click to collapse
Hello,
Can you tell us what firmware was your phone running? Also what recovery do you have on your phone?
If stock, you may try flashing stock firmware via fastboot.
-Vatsal
Vatsal said:
Hello,
Can you tell us what firmware was your phone running? Also what recovery do you have on your phone?
If stock, you may try flashing stock firmware via fastboot.
-Vatsal
Click to expand...
Click to collapse
Thanks for responding so quickly! But I fixed the problem a few minutes after posting this . But there is a new problem, I downgraded from Android 5.0.2 to Android 4.4.2. After doing this the phone worked perfectly. Then a few minutes later it installed a system update for 4.4.4 and now the phone is hard bricked. I can't access recovery mode, CWM, or even turn the phone on now. Before charging the phone, if I held the power button for a long time, the LED lit up and turned back off. Now there is no response from the phone at all no matter what I do.
Also, I had ClockWorkMod and stock recovery on my phone (Is stock recovery the one that shows up when you hold power+volume down? If so I had both CWM and stock) But now I can't access either recovery modes. If it at least went into stock recovery, I'd flash stock firmware, root it, install CWM, and flash a Lollipop zip. (I like Lollipop, I don't know why there are so many people that hate Lollipop )
Any help would be much appreciated. All i need now is a way to flash files without going into recovery mode on phone.

Nexus 4, 4.4.3 KitKAt Bootloop issue

I need your help! My Nexus 4 on 4.4.3 is stuck in a boot loop! I don't know how this happened; however the [fix root? (Yes)] option in CWM recovery is missing! and I can't boot into safe mode to uninstall an app that I think might be causing this; (My phone died while I was using Hangouts and the bottom LED light flashed twice. That's the last thing I remembered before my phone became....a paper weight. Do you have any suggestions? Is there a way to boot into Safe Mode via. ADB or a button command on KitKat? I freally do not want to factory reset my device. I have too many unupdated apps and pictures and personal things on my phone that I've been building for... well 4 years since I've gotten the phone. Any advice will be appreciated, - Milo
Hi !
Go to fastboot and reflash the cwm recovery
fastboot flash recovery recovery.img
Copy your stuffs then onto your PC and then flash one of the factory images from here https://forum.xda-developers.com/nexus-4/general/ref-nexus-4-stock-ota-urls-t1971169/post33631631
Good luck !

Categories

Resources