I have a nexus 5 16 GB and i downloaded the recent software update android 6.0.1 and then I decided to root and I used 'Nexus root toolkit v2.06' and first unlocked the bootloader and then rooted. Everything worked fine but after the process was complete it was rebooting and the booting animation went on and on for many hours and the device did not root. I really don't know what's going on. My purpose is to install a custom rom: cyanogenmod 12. Now what should I do ???? PLEASE HELP. When i try to enter recovery mode it shows a picture of the android mascot with opened back and exclamation and cannot enter command as well. and after some time the booting animation begins and goes on and on...
please help...
nexus_5_ said:
I have a nexus 5 16 GB and i downloaded the recent software update android 6.0.1 and then I decided to root and I used 'Nexus root toolkit v2.06' and first unlocked the bootloader and then rooted. Everything worked fine but after the process was complete it was rebooting and the booting animation went on and on for many hours and the device did not root. I really don't know what's going on. My purpose is to install a custom rom: cyanogenmod 12. Now what should I do ???? PLEASE HELP. When i try to enter recovery mode it shows a picture of the android mascot with opened back and exclamation and cannot enter command as well. and after some time the booting animation begins and goes on and on...
please help...
Click to expand...
Click to collapse
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
funnel71 said:
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
Click to expand...
Click to collapse
Thank you very much for the reply, I really do have no idea as to how to flash the factory image because i am very new in this area. Could you please recommend software and which factory image i should download, please ?? thanks very much.
:good:
funnel71 said:
Unless something has changed, version 6. requires that you flash a special kernel before you can root your phone otherwise you are as you are now, stuck in a boot loop. You should probably download the factory image from Google, and then flash the system image to get rid of what you have done.. Perhaps then your phone will start normally
Click to expand...
Click to collapse
Also, you mentioned a 'special kernel' what does that mean. All i want to do to my device is install cyanogenmod 12 and for that i believe it needs to be rooted, so i am really confused. What should I do know
I'm having this same problem, and unfortunately, when I start the phone on fastboot, I can not access the recovery mode in order to upload a factory image of nexus 5.
I used the new tool available her for quick flash, and now, I don't have a phone.
First, don't panic. Your phone is still very easy to recover. Unfortunately I can't get you a complete walkthrough here (for now at least), so I'll give you the main idea and you'll have to do your homework (as maybe you should have done before).
1. You need to get fastboot working on your computer. It's included in the Android sdk package, but there might be some easier way to get it. Google it. You might need drivers for your pc too. Google it as well.
2. Then you need to get into fastboot mode on your phone. To do it, hold down power button AND volume down button until it gets into fastboot mode. You will see an android on his back with the cover open. At this point, connect your phone to your pc, open a terminal on your pc and type "fastboot devices" without the quotes "". It should find your phone if fastboot is working. If it doesn't work go back to step 1.
3. Download TWRP recovery on your pc and place the img file in the same folder as your fastboot executable (not mandatory but easier). It can be found here https://dl.twrp.me/hammerhead/
4. Always in fastboot mode, type "fastboot flash recovery twrp-2.8.7.1-hammerhead.img" assuming you downloaded that file, which you should have by the way. It should install fine. If you haven't placed the file in the same directory as your fastboot executable, you will need to provide the path to your img file as well.
5. Then use the volume rocker to switch between modes and choose reboot recovery.
6. You should now be in TWRP recovery. At this point, download a custom kernel (anyone found on xda for hammerhead should do) and push it to your phone. It should be fairly simple with TWRP. Then flash your new kernel using install. It should help you get your phone booting normally. Alternatively, you can download a custom ROM like cm12.1 and flash it altogether. It will install everything needed for your phone to boot up too. Beware if flashing a ROM though, I strongly advice you to do a factory reset before flashing it. You will find that option in the wipe menu.
Hope it helps, let me know if you need further assistance.
Yesterday, I have tried everything to have my computer to recognize the "fastboot" command, and I installed like 2 or 3 different programs for that. With my old Windows 7, I have been able to push a flashed image to fix this issue, using the fastboot command, but with Windows 10, it's always telling me it's not a valid command. I'll keep trying it, otherwise, i'll have to "resurrect" my old Windows XP computer.
Also, I noticed now that, while trying to install the fastboot, as per some files that I could download, but no file has been copied into my computer, not even if I run it as admin.
fixed. but no RECOVERY mode options....
Hi Guys,
Thank you very much for the help, I have finally recovered the phone and running android 6.0 MRA58N but it is not rooted. Now if you don't mind could you teach me how to root because i have checked lots of videos and tuts but none worked for me...
IMPORTANT:
when i am in recovery mode why cannot I access options even when i press volume up + power button and release them at the same time...????
Thanks in advance.
Just flash a custom recovery via fastboot. Just make sure your bootloader is unlocked. Can't link though.
hi guys i have used nexus 5 mobile with cyanogenmod 14.1 .It worked properly in 1 year. after that suddenly switched off and it not properly boot up .i try to switch on my mobile , first it show google with unlock logo properly and when it show cyanogenmod logo it stuck and again show google with unlock logo....i try recovery mode to wipe and flash the same rom ....the process is interrupt at middle stage and again show the google..i try lots of time . after few try that process finished completely without interrupt. then use my mobile 1 day same as i used first time root. after that same problem occur on my mobile ..so help me guys
@[email protected], possible power button problem?
Related
Hi there I have a Nexus S with 4.04 on it, so the other day I followed the instruction online and tried to root the phone, I have phone driver installed, and able to unlock my bootloader, the LOCK STATE is UNLOCKED. and I was able to flash Clockworkmod recovery v5.0.2.0.
But after this step, and I tried to reboot, my phone just stuck at the google logo with the unlock sign at the bottom, and wouldn't do anything afterward. (seems like a root loop?)
I tried pulling off the batt a few times but no good. I am still able to lock and unlock bootloader through cmd.(just like in normal state)
I tried to install factory img as shown in the thread http://forum.xda-developers.com/showthread.php?t=1572307. but when I type in the first line "adb reboot bootloader", it says adb devices not found.
so, any idea on how I can restore back to the factory img?
bootloader version i9020xxkl1
model GT-i9020T or if any more info is needed I will be here.....>.<
Did you correctly installed the recovery?
Hi.
First at all let me tell you that I'm not an expert. So, I understand that you should double check this.
I think that you should try to:
- If you have successfully installed the ClockworkMod recovery, you should turn on the device on recovery mode. Vol up + on pushbutton to go inside bootloader. Going down with Vol down, go to recovery and select with on pushbutton.
- Download the correct superuser app for your version. I would double check the md5sum of the file that you have downloaded on your computer.
- Mounting the usb storage of the device on your computer, add the superuser app on /sdcard.
- Umount the usb storage.
- Flash the superuser app, installing from /sdcard from your recovery menu.
- Download a custom kernel on your computer, once that you are unlocked. I'm using CyberGR, and I'm happy with it. You can see all the intallation instructions in the Nexus S development part.
- I that works, I would try to install the kernel in a clear way. For installing the CyberGR ROM, you need to wipe everything and format all. After that, you mount the device on the computer, and try the installation.
Then, if everything is ok, the device will turn on.
Again, I'm not an expert, and I don't know how you can be in contact with the developers that are posting in the developers area. I'm not responsible if your device doesn't works or get bricked.
However, I understand that all that I have described, should not put your device in a worst situation.
And is it doesn't turn on, if it doesn't do anything, then, you can use the linux tooll for bicked devices explained on the developers area.
Hi! Sorry about this rude way but I am in an emergency situation.
I have a ZTE RACER with Android 2.2.2 (official ZTE Frimware) which it keeps rebooting at the splash screen.
Before that, I did a root using SuperOneClick 2.3.3 by Shortfuse. After following the instructions (USB debug, plug-in, root) I've rebooted the phone normally (NOT with adb), and when it got after the ZTE Logo (the first one, not the splash screen and not the Android logo). The animation goes a little and freezes for a few seconds, then restarts automaticly (but not entirely, just repeats the splash screen) and reboot. Rance and repeat! I tried to unroot, but the app hangs, restarting with adb and nothing happens. adb restart command doesn't help that much. What should I do to fix it?
Additional info:
Phone recives adb commands normally.
Possibly Superuser app was leftover before unrooting and rooting again (yes I already did root, but superuser stoped working properly afer app and su files update)
Can't go to FTM Mode, ROM Manager gave me a broken CWM.
Unsure If I can install CWM manually since SD doesn't seem to get mounted.
Phone Info:
ZTE-RACER
Android 2.2.2 (FROYO_P2XXGV_V1.0.0_B2)
CWM 5.0.x (Installed with ROM Manager. Broken.)
Carrier: GR COSMOTE (that's unknown carrier for you.)
Thanks for any help.
P.S.: Does anyone here is greek and has a ZTE RACER with the official 2.2 upgrade? I need the FTM Mode.
From what you have said, it seems like you are in a soft brick not a hard one. This means that there is chance of recovery but you have to be very careful.
You weren't rude so don't worry bout that.
You may want to try a hard reset.
Now that we have identified the problem, you have the ability to try and find it yourself at least.
It is possible to manually flash the generic default 2.2 and this will restore your device.
or
turn off your phone and then press power button and volume up button.Programing will open and there is a option of reset and restore.By using volume button go to reset and restore option and then press power button and home key programing will start and your phone will reset.
Hit thanks if you found this useful.
Deftone said:
It is possible to manually flash the generic default 2.2 and this will restore your device.
or
turn off your phone and then press power button and volume up button.Programing will open and there is a option of reset and restore.By using volume button go to reset and restore option and then press power button and home key programing will start and your phone will reset.
Hit thanks if you found this useful.
Click to expand...
Click to collapse
For the first one, I don't know how since the only way I had was to reflash it with the 1-Click Update (I did that on my ZTE MF636 3G Modem).
About the second, you mean that I must use the adb command, or I just hold it down without connecting it (I am newbie to the Android), but thanks for the help. I'll keep you posted for the results.
(NOTE: 1-click update is the offline frimware updater made by ZTE.)
if the logo appears look for a solution, if nothing happens buy a new one because is a full brick
rivas1981 said:
if the logo appears look for a solution, if nothing happens buy a new one because is a full brick
Click to expand...
Click to collapse
Logo appears but... I still don't get it.
Was that for CWM? Or for the phone?
CWM is broken by the ROM Manager. After installing, I tried to get in, but it got frozen to the Android logo + the red led is on. (Temporal brick).
Should I flash a working CWM to the phone?
Anyone?
If there is a working CWM recovery .img file for your device, flash that using fastboot.
-- Sent from my TouchPad using Communities
post-mortem said:
If there is a working CWM recovery .img file for your device, flash that using fastboot.
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
a) I am not sure if it works but for sure it doesn't come from ROM Manager.
b)Where do I find fastboot and what's the command?
Anyone, please?
I think you get it when you install the SDK, along with ADB. You put your phone into fastboot mode, plug the USB into your computer, and use fastboot flash_image to flash the .img file to your device's recovery partition.
If you can boot your device into fastboot mode, search for "Android Flash Recovery" by Bill.Weckel (Windows only). That'll be the easiest way.
-- Sent from my TouchPad using Communities
post-mortem said:
I think you get it when you install the SDK, along with ADB. You put your phone into fastboot mode, plug the USB into your computer, and use fastboot flash_image to flash the .img file to your device's recovery partition.
If you can boot your device into fastboot mode, search for "Android Flash Recovery" by Bill.Weckel (Windows only). That'll be the easiest way.
-- Sent from my TouchPad using Communities
Click to expand...
Click to collapse
This command doesn't work. Is it fastboot flash recovery [image_file]?
Will somebody please help me out!
Here is the thread for Android Flash Recovery:
http://forum.xda-developers.com/showthread.php?t=1827723
Doesn't work! It does detect it, but it can't flash it (on normal boot only. On recovery/bootloader it just getting bricked). Any other options? Or I have to send it for reflashing?
First off I am sorry for posting this, however I DID use the search tool. I recently got a USA spec Wifi only Xoom. It came with 4.1.1 preinstalled. I have sucessfully unlocked the bootloader.
My problem is this. I cannot gain root or even get CWM installed. I have tried oneclick, i have tried cmd prompt. I have followed every guide I can find to a "T". Is there something missing, is it an issue with Jellybean being preinstalled?
Use http://forum.xda-developers.com/showthread.php?t=1468298 to get CWM installed (and when you reboot from fastboot flashing the recovery image, and this is very important, DO NOT LET IT FULLY REBOOT INTO THE OS. You have to get into recovery in the next boot or the OS will just overwrite it with the stock recovery and you will just have to go back into fastboot and flash the recovery again.
http://forum.xda-developers.com/showpost.php?p=30464067&postcount=408 has the root once you get CWM installed.
airesch said:
Use http://forum.xda-developers.com/showthread.php?t=1468298 to get CWM installed (and when you reboot from fastboot flashing the recovery image, and this is very important, DO NOT LET IT FULLY REBOOT INTO THE OS. You have to get into recovery in the next boot or the OS will just overwrite it with the stock recovery and you will just have to go back into fastboot and flash the recovery again.
http://forum.xda-developers.com/showpost.php?p=30464067&postcount=408 has the root once you get CWM installed.
Click to expand...
Click to collapse
Thanks for the reply, however this is one of the utilities I have tried,..
Here is a bit more info.
I am running windows 7 64bit if it makes a difference. Whenever I get the device into fastboot and try to flash anything, it just hangs at the original fastboot screen. I have let it sit there from 3 hours and eventually I have to reboot it. The Lord AIO Tool you linked just gives me and error message that the device is not a 2.2/2.3 device. If I were at home I would take a screenshot.
Could my bootloader be corrupt? The device still boots up and runs jellybean fine, but I am not loving the stock experience thus far...
Thanks again for the links!
Actually sounds like your drivers aren't right. I will look them up and link them when I get home
Try installing the driver from http://developer.motorola.com/tools/usb_drivers/, rebooting your pc, and try fastboot again. If that still doesn't work, then there may be something wrong with your pc setup OR your Xoom, not sure at that point.
Sent from my SPH-D710 using xda premium
Thanks a million, I am going to try it fresh on my pc at work. Thanks!
That did the trick THANKS A BUNCH!!!!!
Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)
Download the 70mb package for firmware downgrade and the latest marshmallow firmware from your regional huawei's website.
Extract the small package and put the .app file in a folder called dload on the SD card and insert it in your phone.
Boot by holding volume + volume - and pressing power, holding all 3 buttons until the phone vibrates.
The package will flash and afterwards you repeat the process, this time using an .app file from the full marshmallow firmware.
The 70mb package installs not matter how messed up your file system is, and makes your phone ready for the MM firmware. This process brings any brick back to life. Good luck.
I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.
menriquez said:
I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.
Click to expand...
Click to collapse
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563
sysak said:
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Click to expand...
Click to collapse
This is truly one of the worse phones I have ever had when it comes to root and such. My frustration over what, for a unbranded unlocked phone that *should* probably SHIP with root, this phone has and is putting me through is super high.
That being said...so I flashed the new 3.1.0.0 recovery. Before doing that, I had just tried to Unbrick the phone with flashing B162 image with 3.0.3.0...so now the phone is totally frozen in the "Your device has been unlocked and can't be trusted..." screen. Nothing I seem to do can get it out of this mode.
I want to install the rooted b378 boot.img file I just downloaded, but am unable to find the button commands to get the bootloader loaded. Does anyone have any suggestions in somehow trying to save the day with this damned phone?
much thanks in advance.
EDIT: So I got the phone in bootloader mode by pressing vol up/vol down/power and inserting the usb cable...i flashed the rooted boot.img and twrp 3.1.0.1 to both recovery and recovery2 and now i can get into recovery. I feel like I may actually have a chance now to fix this damn thing...
So can anyone point me in a direction where, from this point with the new recovery loaded and the modded boot image installed, where i can get this phone working?? ill use ANY ROM it dont really matter at this point...
Don't worry. It's really easy, once you know what to do, just realy easy to screw up if you don't. If your phone is a mess just roll back to android 6 using the procedure i described above. Once your phone works, update to nougat and install twrp and root following this guide: https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Same issue
Ramonator said:
Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)
Click to expand...
Click to collapse
I pretty much have the same issue. No keyboard showing, just the stupid voice thing, and the Bootloader is Relocked. How did you get it fully unlocked. I can't get it. I guess let me get that resolved first (the bootloader) and I can try to go from there. Please help me.
UPDATE: Never mind I fixed it. I'm not really for sure how either but I think it mainly was just persistence.
Didn't work
Hello, so earlier today I tried to install RROS newest version in hope to get magisk/unrooting my phone because I'm addicted to snapchat and I rooted my phone with SuperSU earlier but didn't know u can't login to snapchat after that. It failed idk why, (I followed instructions very clearly and searched info from internet before doing that) causing me to brick my phone so when I booted it, it only showed black screen. After couple hours not finding way to get into twrp with my circumstances I managed to flash boot, recovery and system images, I tried to reboot and see what happens, (just in case, I kinda knew I didn't had ROM installed at the time, I also was hoping RROS to boot) nothing happened expect my phone got stuck in boot screen for booting EMUI, which was not installed obviously. Again after couple hours I stumbled to your post and managed to finally get myself into TWRP, I followed again ur instructions and everything was going fine, no erros, not anything. When Gapps was finished installing, I rebooted and again it just got stuck into booting screen. I did press and hold Power button, vol+, vol- and got myself into some kind of ROM installing screen, (hard to explain I don't exactly know what is name of it) and no it wasn't Huawei erecovery screen (Power button & Vol+ and no it didn't work me either saying that "getting package info failed") so in that ROM installing screen it just was stuck at 5% installing, and now I don't know what to do. My phone got locked again and I'm stuck at booting screen.
Note:
I don't have SD Card, should I get one and install stock rom?
Sorry for being kinda unclear but I'm tired it was 7 hours ago I got my phone bricked and have surfed on the web finding for answers ever since.
Also as you might notice, yes, I'm new to modding devices etc but still I'm not totally noob. Please help ASAP.
[SOLVED] So after hour of watching netflix as depressed teen I tried to reboot my phone again just in case, got stuck in booting screen. Then I held Power Button + Vol+ and got myself into EMUI stock recovery mode, I chose wipe cache partition and wipe data/factory reset, after that I rebooted my phone, it was stuck in booting screen for like 2 minutes but then it actually finished booting and now my phone is again functioning and god bless locked & unrooted.
I'm using Lenovo K6 Power... And wished to use custom ROM. So did all the procedures(ADB, TWRP, SuperSu, ETC). Now, at the time of installing custom ROM you have to wipe all data including your phone's UI (ROM) so I did that. Now I tried to Install that custom ROM several time but it didn't install, I don't know why. So I clicked on reboot button... And then boom... My phone is stuck at Lenovo logo. I know I made this mistake. I didn't understand that, How can a phone reboot if it's original OS is deleted.
It can't even enter in TWRP recovery mode. Fastboot can be seen sometimes.
So please me with this, I'm completely new in this. Read so many forums and watched so many videos on YouTube for this. But they didn't help me. Any help will be appreciated. Thank You.
Highlights-
1. Stuck at Booting Animation.
2. Can't enter into TWRP recovery mode any how.
3. Fastboot Appears on top sometimes.
sahil_am_18 said:
My phone is stuck at Lenovo logo. I know I made this mistake. I didn't understand that, How can a phone reboot it's original OS is deleted.
Click to expand...
Click to collapse
If phone gets powered on, then its bootloader get run ( comparable to UEFI/BIOS in Windows computer ) what , when its tasks have finished, tries to start/run Android OS.
jwoegerbauer said:
If phone gets powered on, then its bootloader get run ( comparable to UEFI/BIOS in Windows computer ) what , when its tasks have finished, tries to start/run Android OS.
Click to expand...
Click to collapse
I'm sorry ma'am but I didn't understand what you are saying.
sahil_am_18 said:
I'm sorry ma'am but I didn't understand what you are saying.
Click to expand...
Click to collapse
Is not bad: many do not understand
Eeach mobile device can get run, but without an OS it stops after bootloader finished, because it's just a box of bits.
simple
when bootloader shows up, or bring it up with key combinations, connect phone to PC, and in fastboot/bootloader (on phone) type
fastboot reboot recovery
or if not work then:
fastboot boot c:\twrp.img
and do the rest via twrp, like flashing custom ROM again, or just flash stock ROM
indestructible master said:
simple
when bootloader shows up, or bring it up with key combinations, connect phone to PC, and in fastboot/bootloader (on phone) type
fastboot reboot recovery
or if not work then:
fastboot boot c:\twrp.img
and do the rest via twrp, like flashing custom ROM again, or just flash stock ROM
Click to expand...
Click to collapse
Thank you very much mate...
My phone was successfully recovered into TWRP recovery mode. But now the problem is...
While installing ROM it is showing 255 error.
Any suggestions...
Or link to download Working ROM...