First of all i will thanks to @vine4ster/4pda for his rom
I just ported his rom for pixi4 5 4g (5045)
Okay lets start,,
first of all your phone must be rooted and custom recovery installed..
How to install;
1. Reboot into recovery (twrp recommended)
2. wipe data.cache,dalvik cache and system
3. flash rom and gapss (arm 7.1 pico recommended)
4. reboot system (first boot may take up to 5 minutes)
DISCLAIMER: Im not responsible for any damage to your device,flash at your own risk..
Download links
roms = https://www.androidfilehost.com/?fid=1322778262904016666
gapps = https://opengapps.org
Bugs- Eleven music player force closed everytime to open
(will be fixs soon) others?? you tell me
No SimCard
Hi, thanks for the ROM, but i never cant fix the problem with the sim card, i download the allfix rom, hope you can help me.
Even try this
first you need to boot into twrp,,mount nvdata,,search for nvdata folder,,open nvdata folder,,and delete the nvram whole folder,,nvram folder only,,it will make a imei readback for it,,lastly just reboot your phone,,then it will detect the sim
it works with alcatel 5012g?
i cant solve sound problem
i cant solve sound problem
Related
Hey everyone,
During the initial versions of LineageOS, I wasn't been able to install it due to error:7 (Baseband error).
Now, I have tried a method that worked on my yu Yunique device.
This method can be used for any other device also but you have to find corresponding ROM file and other stuffs for your device only.
**Remember to take a full backup before experimenting with your device**
Procedure:
You need following things before you start-
1. LineageOS rom file: https://download.lineageos.org/jalebi
2. Open Gapps: http://opengapps.org (choose platform=ARM, android=7.1 and variant of your choice)
3.Caesium kernel: https://transfer.sh/Yqhm8/Caesium-jalebi-20170701-140319-v2.1.zip
4:LineageOS root file:https://download.lineageos.org/extras (Name: su(arm), version:14.1)
5. Firmware File: https://www.androidfilehost.com/?fid=673368273298934200
NOTE **There are some times that this method won't work in the latest TWRP i.e 3.0.3-0. So, revert back to TWRP 2.8.7.0 and then try the given method.**
Method:
1. After taking a backup of your previous working ROM, wipe off the Dalvik cache + system + cache + data in the recovery.
2. Flash the firmware image.( This solves the baseband error problem)
3. Flash the lineageOS rom file.
4. Now flash the caesium kernel( prevents bootloop)
5. after flashing all 3 files, reboot into system.
The first bootup will take about 2-3 minute(can go upto 5-7 min also). so have patience.
This worked for me. If it also works for you too, then please tell.
Also, you can watch my youtube video for the same:https://youtu.be/nYOsDeG5Kfs
Thank you
NOTE**All the file provided above belongs to their corresponding developers. I am just sharing it for help**
helpful guide
You can also solve this prob by delete baseband line in updater script
Helpful !!!!
MIUI SU 8 7.6.8
Android 5.1.1
Everything you do with your device - you do at your own peril and risk! I do not take responsibility for this.
Important!
If you receive a notification about a new update. Do not put it, it can lead to the release of fresh bricks!
Bugs
Some camera modes are flown out
If that we write in a personal
Instructions
Download firmware
We throw on a memory card
Reboot to TWRP
Backup
Wipe system, data, cache
Flash Zip
Download ROM[URL="https://drive.google.com/file/d/0B8k5stYPf6fIbGNGUTRSaTUzLTA/]Google Drive[/URL]
::CREDITS::
@Kybyak (Ported ROM) @jeka (Some Fixing Helps)
Iam Not A Dev
I want to try it. but the file link is invalid
Link Updated
Please help me to flash miui 9 its stuck at Asus logo
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
sujon3903 said:
Cyanogenmod 12.1 Custom Rom (Unofficial) 100% Bugless
Device Name: Huawei Y3ii LUA-U22, (3G Model)
Chipset: Mt6582,
Kernel: 3.10.72,
Android Version: 5.1
ROM Download Here
___For Preview image click the link beow.-------------
https://drive.google.*com/open?id=1P5chJdDsf2USsLjc8X7r7b8_mB7tIIxM
https://drive.google.*com/open?id=1x0nI4omhIGjcvXwNLFP76nS-hMaCWR03
https://drive.google.*com/open?id=1oQ2ruQEGDETkthz_HHQ9U74zInHkG2t2
https://drive.google.*com/open?id=10Cq3kYKHyNemTank5yaQEHtpmq3UjAVw
https://drive.google.*com/open?id=1QRT29O7dxcIvitwCWiwsNGUc71tgiCSk
------------------------------------------------------------------------------------------------------
++++ For Live Preview Click here
Features Of This Rom:
You can download and flash this rom with any recovery without any error.
-------------------------------------------------------------------------------------------------
It is 100% Bugless Rom
This rom provides you multi boot system
This Rom working for Both Dual Sim & Strong Network Connection.
Long Battery Life
Fast Charging.
Support Audio FX ( That Means Increase You Sound System )
You can record your screen with screencast.
How To Flash This Rom:
1. Wipe Data, cache, Delvik Cache
2. Select Cyanogenmod 12.1 ZIP file from Your SD Card
3. Install The Zip File
4. Flash the GAAps (This time don't wipe anything)
[Note: Download the Gaaps form the link. The gapps should be 5.1 , For all apps select-stock, For few apps select- Nano]
5. Flash the Supersu.zip file beacuse the rom is not pre-rooted.
-------------------------------------------------------------------------------------------------------
[Note: I have Using CTR Recovery For Flashing This Rom]-- If You need the CTR Recovery Then Download Here
-------------------------------------------------------------------------------------------
For More Update please like and share my post. If you face any problem comments below i will answer and solve your problem.
Click to expand...
Click to collapse
Nice one, Man. If you need some help, I am here.
Does this work on LUA-U23?
DiegoxG said:
Does this work on LUA-U23?
Click to expand...
Click to collapse
This ROM, is developed by dev on android latino org. So you can ask the dev, Does this ROM can be used on U23.
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
viper7144 said:
Most of system apps have disappeared, clock bluetooth and others any reasom why ?
Click to expand...
Click to collapse
Can you give screenshot and logcat?
will this remove huawei apps like huawei backup??
drkpntr said:
will this remove huawei apps like huawei backup??
Click to expand...
Click to collapse
Well, Installing custom ROM will remove official features like cloud storage, device account, system data, and user data.
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
drkpntr said:
but is it possible to install them again once a custom rom is applied? because i use huawei back up to save all my data.
Click to expand...
Click to collapse
I think huawei backup will not work properly, because Huawei system use huaweisdk and sync data to account. If you do that, the apps will force close, because Not all custom ROM have same process. Example, you are installing huawei backup, This mean the huawei backup cant work properly(force close) or else. You need a SDK to run huawei system apps. (Like MIUI from Xiaomi)
---------- Post added at 10:50 AM ---------- Previous post was at 10:45 AM ----------
If you want to try please backup your data and system. And Try to install huawei backup. if the apps force close. You can go back to your previous ROM
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
pojunkampar said:
hi.i got problem to flash CM12.1 UNOFFICIAL LUA-U22.zip.trying to update from sd but suddenly "update abort" appear.maybe got wrong step.should i put on exclusive folder like dload or update or something thx in advance
Click to expand...
Click to collapse
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Reed_405 said:
Quick question :
1. Did you install it using Philz or CWM?
2. Did you mean CM12 is ota update?
Click to expand...
Click to collapse
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
pojunkampar said:
not really sure ur question .i'm newbie on this.what i do is off my phone and push volume up and power button to enter recovery mode.so there was i clean data and try to flash this zip.so i got problem there while to update from SD.
did i do wrong?should i do flashtool on PC instead?ty for reply :good:
Click to expand...
Click to collapse
Before trying to install this ROM, you must follow the order first.
1. Unlock Bootloader
2. Installing Philz/CWM/TWRP
3. Do wipe
4. Install the ROM, SuperSU, and other stuff
5. Reboot system
6. Wait 5-10 minutes
7. Enjoy
Why is my phone stuck on start after flashing the Rom .
Sandip Rai said:
Why is my phone stuck on start after flashing the Rom .
Click to expand...
Click to collapse
Have you follow the instruction?
The link is down.... Anyone please give new download link
aroien said:
The link is down.... Anyone please give new download link
Click to expand...
Click to collapse
Okay, since the owner didnt active to reply this message. So I would like to say that this is like disbanded. If I have time I ll give the link. Please wait.
Link not Working
Link not Working
Download Link.........
Cyanogenmod 12.1 Custom Rom please give me the download link..
First of all i would like to thank @erfanoabdi for providing the GSI and providing fixes
Also I'd Thank @abhayruparel for helping me flash this GSI
1) First Of all Your Internal Storage Will be wiped out so backup important data
2) U need to be in Non Treble TWRP Download Link
3) Then Decrypt First by formatting data partition (Go to Wipe ---- Format Data)
Note ecryption is an important step do not skip it!!
4) Reboot to recovery
5) Change Data partition to f2fs
Note :- If at any point TWRP gives error message like failed to format or mount /data , reboot to recovery
6) Change data partition to ext4
7) Wipe System, Data, Internal Storage, Cache, Dalvik Cache
8) Now reboot to recovery even if u are on recovery
9) Now Flash Treble TWRP by mike Download Link
10) Reboot to recovery again (Mandatory)
11) Now flash los 15.1 Official only no other zip Download Link
Please do not boot into the ROM because it automatically encrypts and all your previous efforts will be in vain!!!
12) Now wipe System, data, cache, internal Storage
13) Now Flash Android P semi GSI in system (Remember the GSI file which you will download will be ".zip" file , extract it from PC and use the ".img file") GSI Link = Download Link
14) Reboot to twrp again This is mandatory
15 Now go to mount and check all the Checkboxes, mounting vendor is mandatory
16) Then Flash Post Zip 1 = Download Link
17) Then Flash Post Zip 2 = Download Link
18) Then Flash Post Zip 3 = Download Link
19) Then Flash Incall fix zip is not needed in Developer Preview 4 !!
20) Then Flash p lag fix zip Download Link
21) Treble Magisk = Download Link
Now Reboot to rom and viola U will have android P gsi boot on ur P2!!!
Bugs that i found While Using this GSI (Kuntao Specific)
VOLTE
FP Gestures
Camera mode switching takes 3 to 4 seconds to open
Sometimes it lags for 3 to 4 seconds (not a big deal tho)
Double Tap To Wake
NFC
I have found these much bugs so far if you find any more Please report it!!
Now a video tutorial for this is live on my channel !!!! Youtube Link
Note = All the links that i have shared are not my works all the zips are made by @erfanoabdi .
Also Official Treble Los 15.1 and Treble TWRP is made by @mikeioannina , i am just sharing this. as a guide For download link of the GSI and additional Information please visit this thread
Enjoy!!!!
gamefreaksuraj said:
First of all i would like to thank @erfanoabdi for providing the GSI and providing fixes
Also I'd Thank @abhayruparel for helping me flash this GSI
1) First Of all Your Internal Storage Will be wiped out so backup important data
2) U need to be in Non Treble TWRP Download Link
3) Then Decrypt First by formatting data partition (Go to Wipe ---- Format Data)
Note ecryption is an important step do not skip it!!
4) Reboot to recovery
5) Change Data partition to f2fs
Note :- If at any point TWRP gives error message like failed to format or mount /data , reboot to recovery
6) Change data partition to ext4
7) Wipe System, Data, Internal Storage, Cache, Dalvik Cache
8) Now reboot to recovery even if u are on recovery
9) Now Flash Treble TWRP by mike Download Link
10) Reboot to recovery again (Mandatory)
11) Now flash los 15.1 Official only no other zip Download Link
Please do not boot into the ROM because it automatically encrypts and all your previous efforts will be in vain!!!
12) Now wipe System, data, cache, internal Storage
13) Now Flash Android P semi GSI in system (Remember the GSI file which you will download will be ".zip" file , extract it from PC and use the ".img file")
14) Reboot to twrp again This is mandatory
15 Now go to mount and check all the Checkboxes, mounting vendor is mandatory
16) Then Flash Post Zip 1 = Download Link
17) Then Flash Post Zip 2 = Download Link
18) Then Flash Post Zip 3 = Download Link
19) Then Flash Incall fix zip Download Link
20) Then Flash p lag fix zip Download Link
Now Reboot to rom and viola U will have android P gsi boot on ur P2!!!
It will still give same error like " Please contact your device manufacturer.. etc etc " ignore it as it will boot normally into the rom
Bugs that i found While Using this GSI (Kuntao Specific)
VOLTE
Dark Mode
FP Gestures
Front camera takes 3 to 4 seconds to open
Magisk Gave Bootloop to Abhay but for some other guy 16.6 beta Worked (Magisk I have not tested )
Sometimes it lags for 3 to 4 seconds (not a big deal tho)
I have found these much bugs so far if you find any more Please report it!!
Note = All the links that i have shared are not my works all the zips are made by @erfanoabdi .
Also Official Treble Los 15.1 and Treble TWRP is made by @mikeioannina , i am just sharing this. as a guide For download link of the GSI and additional Information please visit this thread
Enjoy!!!!
Click to expand...
Click to collapse
Abb hoga tumhara naam
get ready for some fame :angel:
gamefreaksuraj said:
First of all i would like to thank @erfanoabdi for providing the GSI and providing fixes
Also I'd Thank @abhayruparel for helping me flash this GSI
1) First Of all Your Internal Storage Will be wiped out so backup important data
2) U need to be in Non Treble TWRP Download Link
3) Then Decrypt First by formatting data partition (Go to Wipe ---- Format Data)
Note ecryption is an important step do not skip it!!
4) Reboot to recovery
5) Change Data partition to f2fs
Note :- If at any point TWRP gives error message like failed to format or mount /data , reboot to recovery
6) Change data partition to ext4
7) Wipe System, Data, Internal Storage, Cache, Dalvik Cache
8) Now reboot to recovery even if u are on recovery
9) Now Flash Treble TWRP by mike Download Link
10) Reboot to recovery again (Mandatory)
11) Now flash los 15.1 Official only no other zip Download Link
Please do not boot into the ROM because it automatically encrypts and all your previous efforts will be in vain!!!
12) Now wipe System, data, cache, internal Storage
13) Now Flash Android P semi GSI in system (Remember the GSI file which you will download will be ".zip" file , extract it from PC and use the ".img file")
14) Reboot to twrp again This is mandatory
15 Now go to mount and check all the Checkboxes, mounting vendor is mandatory
16) Then Flash Post Zip 1 = Download Link
17) Then Flash Post Zip 2 = Download Link
18) Then Flash Post Zip 3 = Download Link
19) Then Flash Incall fix zip Download Link
20) Then Flash p lag fix zip Download Link
Now Reboot to rom and viola U will have android P gsi boot on ur P2!!!
It will still give same error like " Please contact your device manufacturer.. etc etc " ignore it as it will boot normally into the rom
Bugs that i found While Using this GSI (Kuntao Specific)
VOLTE
Dark Mode
FP Gestures
Incoming Calls Sometimes work , sometimes they do not work
Sometimes incoming audio gets distorted
Front camera takes 3 to 4 seconds to open
Magisk Gave me black screen blue LED
Sometimes it lags for 3 to 4 seconds (not a big deal tho)
I have found these much bugs so far if you find any more Please report it!!
Note = All the links that i have shared are not my works all the zips are made by @erfanoabdi .
Also Official Treble Los 15.1 and Treble TWRP is made by @mikeioannina , i am just sharing this. as a guide For download link of the GSI and additional Information please visit this thread
Enjoy!!!!
Click to expand...
Click to collapse
Bugs NFC, DT2W
Can someone make videos for p2 android p installation??
berkay0733 said:
Can someone make videos for p2 android p installation??
Click to expand...
Click to collapse
+1
berkay0733 said:
Can someone make videos for p2 android p installation??
Click to expand...
Click to collapse
Dude the steps are given in such a great and detailed manner... And I was able to install in the first attempt....it's not good to be spoon fed Everytime....just follow it step by step..and ul be able to flash it successfully...
I didnt install plagfix, is necessary?
Pls link 16 and 17 not working
iniro said:
I didnt install plagfix, is necessary?
Click to expand...
Click to collapse
Ul face a lot of freezes if u don't
ASP02 said:
Ul face a lot of freezes if u don't
Click to expand...
Click to collapse
Maybe when openning camera. Can I flash now? Or I need to wipe all?
Thx!
iniro said:
Maybe when openning camera. Can I flash now? Or I need to wipe all?
Thx!
Click to expand...
Click to collapse
Not opening camera ..but while switching from front camera to back cam or vice versa....
Take backup.. follow steps carefully
dp4 released
berkay0733 said:
Can someone make videos for p2 android p installation??
Click to expand...
Click to collapse
Yes brother , i will infact make a video for installing DP4 gsi tonight , expect the video to arrive tomorrow
I will be posting my youtube video link here
Guyzz Youtube tutorial for this is live now!!! , link in the main post
Anyone with dp4 and working gcam? To me closes when tap on settings.
iniro said:
Anyone with dp4 and working gcam? To me closes when tap on settings.
Click to expand...
Click to collapse
yes , gcam is a true problem. but front cam portrait works (colors not good)
What camera do you use?
Hi @gamefreaksuraj i have read somewhere that it has calling bug where you can't heard the voice. It is true?
And what about the substratum, does it work? I really liked the swift black theme.
Can we use it as a daily driver?
shabab malik said:
Hi @gamefreaksuraj i have read somewhere that it has calling bug where you can't heard the voice. It is true?
And what about the substratum, does it work? I really liked the swift black theme.
Can we use it as a daily driver?
Click to expand...
Click to collapse
no calling issue in dp4
Im using like daily driver. Form me only issue is that I cant enter on gcam settings.
Hello, so, my problem is same as title says.
I´ll try to write it as short as possible.
I tried to install Resurrection Remix, Lineage OS, Arrow OS, BootLeggers ( All are unofficial builds for my Redmi 6 ), but everytime I got the constant rebooting bootloop, so I need to go to TWRP and flash Official MIUI ROM
Here are my installation steps for Resurrection Remix ( Pretty same as In this Tutorial ) :
1. - I went to TWRP ( LR. Team TWRP 3.3.1 )
2. - It was showing Internal Storage (0MB), so I click on Wipe - Format Data - yes
3. - After that also Wipe - Advanced Wipe - I selected Dalvik / ART Cache, System, Cache, Data, Vendor
4. - I moved RR Flashable .zip file and Magisk v19.3 from my PC to phones Internal Storage (via USB Cable)
5. - I clicked on Install - RR-P-v7.0.2-20200111-cereus-Unofficial.zip - Add more zips - Magisk-v19.3.zip
6. - After that, I clicked on Wipe cache/dalvik, checked if I´ve got any errors and clicked on Reboot
7. - After that, phone started to restart around every 5 seconds until I went to TWRP and Installed Official MIUI ROM
BONUS. - Tried also on second try to flash MIUI Firmware before RR .zip file, but the results were same.
Also I don´t want Gapps in my phone so i didn´t flash them.
With other ROMs it was same, always bootloop. Here are all .zips, links to forums, tutorials that I followed.
So please message me what´s the issue, especially while installing Resurrection Remix, because this is the ROM that I would like to install the most.
I know it's too late for reply I'm just posting this so that others (like myself) can see this. Lets keep the community for this phone alive!
Install MIUI V10.4.4.0 (I found that this version works for me), Disable DM verity (https://forum.xda-developers.com/t/...ncrypt-disk-quota-disabler-11-2-2020.3817389/) and finally wipe data and install your custom rom.
It will bootloop on the first boot so wait a few seconds then force reboot