Database Info

[Updated to v5.10.29] [Xolo Q3000] [ROM] MiUi7_v5.10.15 with updates

As it was a challenge @rohitsinghpu, here is MY 7th PORTED ROM for Xolo Q3000, with special thanks to:
1) Xolo for the awesome phone at affordable price,
2) MIUI for the wonderful rom,
3) Of course, me for Custom Boot Logo, Re-partitioning (/system - 1gb ) & Porting ROM for Xolo Q3000.
Pre-requisites:
1) Custom recovery such as TWRP, CWM, PhilzTouch(TWRP 2.8.4 rev2 prefered, as I've tested rom using this recovery)
2) Before proceeding, Back up your Current Rom (Failsafe).
3) /System minimum 1gb partition (Repartition your phone, before you flash this ROM).
4) SP Flash Tools & Stock rom (In case, If you are in trouble).
Procedure:
1) Put the downloaded MiUi7_v5.10.15 by Sachin.zip in sd card.
2) Reboot to Recovery using root apps or by pressing (PowerOn + VolumeUp) key combination.
3) If you are on MiUi ROM, Wipe Cache, Dalvik Cache, Android Secure using Advanced Wipe, else perform Full Wipe.
4) Install MiUi7_v5.10.15 by Sachin.zip
5) Wipe Cache & Dalvik Cache & Reboot.
9) Phone will get upgraded to newer version, without losing any data.
10) If u face any problem or want to flash as clean install, then wipe data as well as system, alongwith Dalvik & Cache, before flashing rom.
WARNING:
I WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE. EVEN THOUGH, I'VE TESTED & USING IT ON MY DEVICE. TRY AT YOUR OWN RISK.
HOWEVER, I WILL BE AVAILABLE, ALWAYS, TO HELP YOU & SOLVE THE PROBLEMS FACED BY YOU.
Features:
1) Everything from MIUI working fine
2) Latest Google Keybord
3) WSM Tools Pre-Installed
4) SuperUser & BusyBox installed
5) MIUI Video as default media player
6) WiFi Direct working
7) Advanced power menu
8) Custom Boot Logo
9) Full changelog at: http://en.miui.com
Bugs:
Nearly Bugless ROM, few minor bugs are as follows:
1) Some of the Icons missing when using default theme(Change the theme).
2) Report, if you found any.
Note:
For Engineer Mode, dial *#*#3646633#*#*,
Download Links:
1) MiUi7_v5.10.15 Full ROM
All the Best, Guys......

Screenshots:
https://drive.google.com/open?id=0B9c3NsdJ2PscTlE2WVJid2lwX3c

Updates:
If you are using TWRP, Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
Also, if you are on twrp or any other recovery, you can update as follows:
reboot to recovery and flash ota.zip, wipe cache & dalvik, reboot.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA

Bug Fixes:

Great work bro, i ws missing wsm tool as it ws not compatible with roith bro port, it gave fc n random reboot, i tried many wsm version, then fount it ws instability in rom, ( sorry no offense roith bro, u did ur best and im thankfull to u)
Sachin bro, i always look forward to ur work?
Thanks fr making update easyy, downloading now, will review later

sachin.r.fulzele said:
Updates:
Open Updater application or Launch From Settings/About Phone/System updates, from options(top right corner), select Choose Update Package, locate the OTA.zip file. Wait for Updater to finish the job, phone will reboot to recovery & then to updated version.
1) MiUi7_v5.10.15 to 5.10.22_OTA
2) MiUi7_v5.10.22 to 5.10.29_OTA
Click to expand...
Click to collapse
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?

Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,

iaditya91 said:
Thanks for the beautiful rom.
Sir when I tried to install ota updates from system updates it is going to recovery and saying installation aborted. Any other way to install these ota updates?
Click to expand...
Click to collapse
U must be on twrp to update in the mentioned way. If u r on any other recovery, flash as a normal zip from recovery.

Jagadish-ravi said:
Rom is completely stable bro, theme stays even aftr reebot, all xposed modules working good, no lag, giving good battery backup,
Is there any ideas to port other roms from turkdevs
forum.turkdevs.com/konu-4-4-2-xperia™-z3-v5-1-final-for-gm-discovery.html
forum.turkdevs.com/konu-4-4-2-art-samsung-galaxy-s6-rom-for-gm-discovery.html
forum.turkdevs.com/konu-port-ios-8-ayfone-rom-v1.html
These r the few roms i like to get my hands on bro,
Click to expand...
Click to collapse
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.

sachin.r.fulzele said:
Xperia z3 & galaxy s6 rom will be posted after 9 November, as my exams are running.
Click to expand...
Click to collapse
Awesome bro :thumbup::thumbup:

Does security and cleaner app works fine or still has reboot issues...

Inbuilt browser fc..

Installing Lineage OS on Yu Yunique Without Error 7 and bootloops

Hey everyone,
During the initial versions of LineageOS, I wasn't been able to install it due to error:7 (Baseband error).
Now, I have tried a method that worked on my yu Yunique device.
This method can be used for any other device also but you have to find corresponding ROM file and other stuffs for your device only.
**Remember to take a full backup before experimenting with your device**
Procedure:
You need following things before you start-
1. LineageOS rom file: https://download.lineageos.org/jalebi
2. Open Gapps: http://opengapps.org (choose platform=ARM, android=7.1 and variant of your choice)
3.Caesium kernel: https://transfer.sh/Yqhm8/Caesium-jalebi-20170701-140319-v2.1.zip
4:LineageOS root file:https://download.lineageos.org/extras (Name: su(arm), version:14.1)
5. Firmware File: https://www.androidfilehost.com/?fid=673368273298934200
NOTE **There are some times that this method won't work in the latest TWRP i.e 3.0.3-0. So, revert back to TWRP 2.8.7.0 and then try the given method.**
Method:
1. After taking a backup of your previous working ROM, wipe off the Dalvik cache + system + cache + data in the recovery.
2. Flash the firmware image.( This solves the baseband error problem)
3. Flash the lineageOS rom file.
4. Now flash the caesium kernel( prevents bootloop)
5. after flashing all 3 files, reboot into system.
The first bootup will take about 2-3 minute(can go upto 5-7 min also). so have patience.
This worked for me. If it also works for you too, then please tell.
Also, you can watch my youtube video for the same:https://youtu.be/nYOsDeG5Kfs
Thank you
NOTE**All the file provided above belongs to their corresponding developers. I am just sharing it for help**

helpful guide
You can also solve this prob by delete baseband line in updater script

Helpful !!!!

[GUIDE] How to Flash Custom ROM on OnePlus 6 (Enchilada) [Decrypted Devices]

Here is Simple guide for Flashing Every Android Pie or 10 on Decrypted Device..
Here I Prefer to Make Guide On Decrypted Device only Because Decrypted Device Giv's more flexibility while Switching ROM's.
Reasons are simple.. Flashing ROM over Encrypted device might Loose data if anything goes wrong..
For Decryption, Follow @HatRiGt Guide..
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
Now Here is Steps to follow
When Flashing New ROM
Download OOS(Beta), TWRP 3.3, ROM, Gapps, Magisk 20, No-Verity-Treble zip & Copy them into Device
Reboot Into Recovery
Wipe > Advanced Wipe > Select Cache, System & Data & Swipe to wipe it
Flash OOS, TWRP & Reboot to Recovery
Flash OOS, TWRP Again & Reboot to Recovery
Flash ROM, TWRP & Reboot to Recovery
Flash Gapps, Magisk, No-Verity-Treble & Reboot to System
Done
When installing New Update
Download ROM Update ZIP, TWRP 3.3,, Gapps, Magisk, No-Verity-Treble zip & Copy them into Device
Reboot Into Recovery
Flash ROM, TWRP & Reboot to Recovery
Flash Gapps, Magisk, No-Verity-Treble & Reboot to System
Done
Few Point's to highlight
1. This Guide is Strictly for Decrypted Devices..
2. Follow Exactly Same Steps & Flash Exactly same ZIP's for avoid Potential data loss..
3. Flashing Magisk is totally upto you. Flash it if you want to keep rooted(You migh need it if you pay Google Pay as SafetyNet not passing on Android 10 & need module to fix it)..
4. Use No-Verity-Treble zip only from this Post as One Given in @HatRiGt Guide is only for Pie Based ROM's.. Attached ZIP is Working on Both Android 9 & 10.. Don't complain/Blame me if you did something wrong..
<Mod edit - removed>

[SOLVED] 4g Version (perseus) bootloop when trying to flash custom rom

Hi there,
after going through several threads, and trying for 5 days to get it to work I decided to open a new topic on my issue.
My goal is to flash PixelExperience for Xiaomi Mi Mix 3 [Perseus]. (I also tried [ROM] [11.0.0] [perseus] ArrowOS 11.0 [OFFICIAL] [NIGHTLIES] also with no luck) I think I am missing something since every time I try to flash it according to several descriptions (have stopped counting how often) I end up in a bootloop with the mi logo.
Here is what I do step by step in hopes that someone can show me where I am making a mistake / provide a working procedure:
A. Downloads (on my PC) and setup of PC
Magisk-v22.1.apk renamed to Magisk-v22.1.zip
miui_MIMIX3_V12.0.3.0.QEECNXM_b96755549d_10.0.zip from (here)​
since Arrow and PE devs recommend this as a base for flashing their ROM´s. My Phone originally ran 12.0.2 EU. Flashing 12.0.3 works with no issues.
twrp-3.5.2_9-0-perseus.img which I flash
Custom Rom.zip (as described tried Arrow 11 and PE)
B. Step by step guide what I do:
1. Install Flash 12.0.3 Firmware, Enable Dev Mode, fastboot and flash twrp-3.5.2_9-0-perseus.img
2. Boot into TWRP
3. Wipe -> 1. Factory Reset -> 2. Format Data -> yes -> 3. Advanced Wipe (cache, system, vendor, data)
4. ADB-Sideload PixelExperience_perseus-11.0-20210408-0751-UNOFFICIAL.zip - also tried adb push to sd and then install - with same result
5. Wipe Format Data -> yes
6. ADB-Sideload Magisk-v22.1.zip
7. Bootloop - when I select reboot TWRP tells me no OS detected and it loops with the Mi logo.
I am sure I am missing something or messing something up (maybe in TWRP Wipes Step 3 or 5?) since either PE or Arrow work.
Any suggestion / help would be appreciated
Have a nice day

Solved it.

illballer said:
Solved it.
Click to expand...
Click to collapse
Would you please do the following two things:
1) Edit the title and append something like [SOLVED].
2) Please share what you did so others can learn from it and use it if they also need it.

User699 said:
Would you please do the following two things:
1) Edit the title and append something like [SOLVED].
2) Please share what you did so others can learn from it and use it if they also need it.
Click to expand...
Click to collapse
Solution from User p1exer worked after flashing twrp-3.4.0-10-perseus-mauronofrio.img
1. Download the xiaomi.eu ROM.
2. Reboot in TWRP.
3. Flash the xiaomi.eu ROM.
4. Wipe Format Data.
5. Advanced Wipe Cache and System.
6. Flash the ROM
Click to expand...
Click to collapse

Question LineageOS: "Can't load Android System" on first boot.

My new Xiaomi Poco X3 Pro is showing an error screen after some time, like in this post:
https://forum.xda-developers.com/t/cant-load-android-system-lineageos.4314035/
It reads "Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device"
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
After the first error screen
- I tapped Try again,
- When the error occurred again, I tapped "Factory data reset," but the error still occurred. The phone is new, no user data is on the phone.
- I booted into recovery and reset all the data I could. When I tap "Format system partition" it throws an error "E: Failed to open /dev/block/dm-0: No such file or directory. System wipe failed."
- Then I repeated the adb sideload. The error occurs again.
- I removed the SIM card, as someone in the forum suggested this could be a problem source. The error still occurs.
What can I do now?
----
Update [2021-12-05 Sun 20:09]
It seems to be a Problem with the GApps Version.
What I did Try so far is:
- Install 03-12-LOS and latest GApps via LOS recovery (didn't work)
- Install 03-12-LOS and latest GApps via TWRP recovery (didn't work)
- install LOS Build from 26-11-2021 without GApps (works)
- Install LOS Build from 26-11-2021 with latest GApps (didn't work)
- Install LOS Build form 26-11-2021 with GApps from 25-11-2021 (works)

Just use TWRP, flash ROM and AFTER flashing ROM Format Data where you have to type "yes". (Format, not Wipe)
Xiaomi Poco X3 Pro
Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me

Thanks for the Idea. At the moment it has not solved the problem.
This is what I did:
- Flash TWRP
Code:
fastboot flash recovery TWRP-3.5.2-vayu-Nebrassy-2.img
- copy lineage-18.1-20211203-nightly-vayu-signed.zip and "open_gapps-arm64-11.0-nano-20211204.zip" to the Poco device
- install via "install" option, wipe cache at the end of installation
- Format files (via "Wipe" -> "Format Data" -> type "yes")
- Reboot
After some time of the animated Lineage OS logo, the phone reboots into TWRP.
To me this seems very similar to the Lineage recovery before.
Any ideas what could be wrong?

You probably wiped System or Vendor partition or something, you are not supposed to do that.
Most likely you have to reflash MIUI now first. Make sure it's atleast version 12.5.X.X.
Flashing instructions are really simple, this apply to all ROM's.
FIRST INSTALL?:
Remove any fingerprint, PIN, or password in MIUI
Unlock the bootloader
Transfer ROM to internal storage
Install any suitable recovery
Flash ROM zip file
Do a data wipe in recovery (format data)
Reboot to the system, wait and enjoy
FLASHING UPDATES?:
Download via OTA Updater and let it automatically install; OR
Download an update, transfer to internal/external storage (always check file sha256)
Flash ROM zip and reboot.
Do not wipe anything else or add any additional steps. (maybe except Gapps if ROM doesn't have them included)
ps.
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
This happened so far:
I just unlocked the boot loader of my new phone after week of waiting.
I followed the official lineage instructions to install the OS: https://wiki.lineageos.org/devices/vayu/install
Everything worked including the sideloading via db.
I downloaded those two files for the LineageOS-Site:
- Recovery via fastboot: lineage-18.1-20211203-recovery-vayu.img (recovery works, I can still boot into recovery)
- System via adb: lineage-18.1-20211203-nightly-vayu-signed.zip
I also added Gapps via adb: "open_gapps-arm64-11.0-nano-20211204.zip"
Both adb transfers exited successfully.
Click to expand...
Click to collapse

k3lcior said:
In first post there is no mention if you did Format Data or not and when you did it. Like i said before - you have to Formata DATA AFTER flashing ROM . Not before.
Click to expand...
Click to collapse
I followed the LOS Install Guide: https://wiki.lineageos.org/devices/vayu/install But this procedure does not seem to bee the cause (see below).
Download the LineageOS installation package that you would like to install or build the package yourself.
Optionally, download an application package add-on such as Google Apps (use the arm64 architecture).
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. When Xiaomi/POCO/Redmi splash appears, release Power and keep pressed Volume Up until recovery appears.
Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
Return to the main menu.
Sideload the LineageOS .zip package:
On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
Click to expand...
Click to collapse
Okay so this is what I did (the part that works):
- I downloaded the latest possible stock ROM from https://www.xda-developers.com/down...ut-several-xiaomi-redmi-mi-poco-devices/#vayu The fastboot ROM is more than 5GB.
- Extract the file "vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea_05cc38de43.tgz"
- then connect the phone via USB cable in fastboot mode and:
Bash:
cd ~/Downloads/vayu_eea_global_images_V12.5.3.0.RJUEUXM_20211015.0000.00_11.0_eea
/bin/bash ./flash_all.sh
- The default MIUI starts flawless, as it dit the first time I turned on the phone. So far so good.
What didn't work:
1. I installed the LOS Recovery again and flashed the OS and Gapps. Only after that I did step 3 - formating. The result ist the same bootloop as in the beginning.
2. I flashed the stock MIUI ROM again (which woks fine). Then I flashed TWRP, transfered the OS and GApps file and installed. I did not wipe anything, just used "format data" like above.
In both cases the OS does not start. After a while displaying the LOS-logo the phone reboots to recovery.
What did work:
I downloaded lineage-18.1-20211126-nightly-vayu-signed.zip, one version before the latest verion and the corresponding recovery lineage-18.1-20211126-recovery-vayu.img
I flashed only the OS, and no GApps -- and it launched successfully. Installing with the latest GApps failed again.

Install older gapp, not all gapp is compatible