Related
Hi all,
I am generally not a XDA active reply user. I worked on a lot of Android fixing project. And here is one of mine result.
Please read the whole thread before working on it.
I know everyone is frustrating in upgrading to 4.4.2 but brick during odin process (ext4 fail) and stuck in 4.4.2 bootloader.
PS: This method is currently work on HK note3, but i think this method would work on all note3, Please try this will your own risk, I would not be responsible to all trouble according to this method. Varied N9005 would require different N9005 4.3 Firmware, I personally use HK Firmware because Mine is 16gb Note 3.
Here is the method to solve this problem:
Before working on it, we have to prepare the following things:
1. Odin 3.07 (Yes, 3.09 does not work)
2. HK firmware odin pack (Pit, BL (DO NOT WORK WITH IT, AP, CP, CSC) (Sorry for it is a Chinese link)
OR Workable N9005 4.3 firmware
3. 4.4.2 leaked firmware
4. 4.4.2 rom (I used sweet rom v.7 to fix it)
5. 4.4.2 recovery cwm @Chenglu
5. Samsung driver (bullshxt)
Now lets get started:
1. Flash the 4.4.2 firmware BL by odin.
2. Flash the HK Firmware AP, CP &CSC (Do not use the HK firmware BL)
3. once it done, turn to Download mode again and flash 4.4.2 recovery cwm by odin
4. Run Recovery
5. Wipe everything
6. Flash 4.4.2 rom ( I flashed sweet rom v7 currently)
7. Boot to system and do all the setting ( The sound and the signal are not working)
8. Boot back to download mode
9. Boot the 4.4.2 leaked firmware's CP ( DO NOT WIPE AFTERWARD)
10. Prepare coffee and cookies
11. Enjoy your device!
karnavont said:
Hi all,
...
Click to expand...
Click to collapse
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
xclub_101 said:
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
Click to expand...
Click to collapse
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
xclub_101 said:
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
Click to expand...
Click to collapse
Okay, i changed it, in term of a reference instead
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
maumarti2k said:
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
Click to expand...
Click to collapse
What version of Odin did you used? For the past 24 hours is it stable and any FC's? Are all apps working? I wanna try your guide. Having problem on the O.P. guides.
I am in the exact same situation, all over methods have failed, im going to try this!
3. 4.4.2 leaked firmware is a dead link!
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
jetbruceli said:
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
Click to expand...
Click to collapse
Seems I have had some success. Although, I found a couple of the instructions difficult to understand. Thanks for posting this, as I no longer have a brick.
Cheers.
filchi756 said:
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
Click to expand...
Click to collapse
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Samsung Note 3 Region Taiwan Softbrick UDC START
AldrichDSaints said:
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Samsung Note 3 Region Taiwan Softbrick UDC START
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
budi_west said:
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Click to expand...
Click to collapse
i also have the same problem. what should i do
Samsung note 3 Region Taiwan UDC START
sagsans said:
i also have the same problem. what should i do
Click to expand...
Click to collapse
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
budi_west said:
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
Click to expand...
Click to collapse
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Samsung Note 3 Taiwan UDC START
sagsans said:
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Click to expand...
Click to collapse
How do you flash the SweetROM what version? have you try locky guide?
Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3
http://forum.xda-developers.com/showthread.php?t=2627291
by: Locky Loki
Try this something else out
[ROM]N9005ZHUENB1 Android 4.4.2 Kitkat
http://forum.xda-developers.com/showthread.php?t=2636699
Or
[SOLUTION] Successful flash of leaked NA6 ROM on Hong Kong 32g N9005
http://forum.xda-developers.com/showthread.php?t=2613374
Actually i have started a question [Q] about Note 3 Taiwan UDC START at this forum but with no reply
[Q] Samsung Galaxy Note 3 SM-N9005 Region Taiwan Softbrick UDC START
http://forum.xda-developers.com/showthread.php?p=50061661
Lately i found out somebody posting That he is from Region taiwan anda he is able to flash firmware from region Hongkong and Taiwan Only..
So, i suppose Taiwan Region can seek help from Hongkong Region
So, I bricked my Samsung S4, and I'd like to download a custom rom from sammobile. I currently have 2 here. But the difference is in PDA, and CSC. I have absolutely no clue which one to download onto my phone because I have no clue what either means.
Date Country/Carrier Version
2015-09-07 Canada (Globalive Wind Mobile) 5.0.1
2015-09-07 Canada (Globalive Wind Mobile) 5.0.1
PDA M919VVLUGOH1
PDA M919VVLUGOD1
CSC M919VYVLGOH1
CSC M919VYVLGOD1
Which to choose?
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Good luck!
malybru said:
PDA represent your build version
e.g your current build is Build: GINGERBREAD.XXLA6, then PDA version of your ROM is XXLA6
again XX represend for countries, XX means it is for europian country
If suppose your build info contain DDLPA, then DD represens for India and PDA version is LPA, means that ROM is for India
Same way CSC is sales code., you can check your ROM CSC by dialling *#1234#
again first two digits represents country and last three represents release time.
But as such there is no restriction to use any ROM for any country if your device is unlocked(carrier restriction free)
Latest ICS is LRK for germany, you can use that too.
Good luck!
Click to expand...
Click to collapse
So which one of the two would I use?
Acrystic said:
So which one of the two would I use?
Click to expand...
Click to collapse
When you go to the download page , you should see this:
Model SGH-M919V
Model name GALAXY S4
Country Canada (Globalive Wind Mobile)
Version Android 5.0.1
Changelist 4508315
Build date Mon, 24 Aug 2015 15:57:26 +0000
Security Patch Level N/A
Product code GLW
PDA M919VVLUGOH1
CSC M919VYVLGOH1
Go for that one
malybru said:
When you go to the download page , you should see this:
Model SGH-M919V
Model name GALAXY S4
Country Canada (Globalive Wind Mobile)
Version Android 5.0.1
Changelist 4508315
Build date Mon, 24 Aug 2015 15:57:26 +0000
Security Patch Level N/A
Product code GLW
PDA M919VVLUGOH1
CSC M919VYVLGOH1
Go for that one
Click to expand...
Click to collapse
Any reason mate? I am getting the ROM from Sammobile.
That is the newer one of the 2 you quoted.
malybru said:
That is the newer one of the 2 you quoted.
Click to expand...
Click to collapse
The whole process takes a while. But my PC can only work for 6 hours, is 6 hours enough time for the whole process (downloading + flashing) to be done? Because i assume that if the pc disconnects while it's flashing im screwed. I have an alternative too. I could get the file, then put it on a usb, but does the flashing take more than 6 hours?
Acrystic said:
The whole process takes a while. But my PC can only work for 6 hours, is 6 hours enough time for the whole process (downloading + flashing) to be done? Because i assume that if the pc disconnects while it's flashing im screwed. I have an alternative too. I could get the file, then put it on a usb, but does the flashing take more than 6 hours?
Click to expand...
Click to collapse
May I suggest you do the downloading in one ( 6 hour ) session , then the flashing in another.
malybru said:
May I suggest you do the downloading in one ( 6 hour ) session , then the flashing in another.
Click to expand...
Click to collapse
Yes thanks, I will do the downloading to my usb and then flashing in a seperate session but may I ask if the flashing takes more than 6 hours? Also, could you run me through the steps of flashing with odin without downloading kies itself to my computer because it does not work. Thanks.
When I used to flash stock , it was normally a quick process.
Never anywhere near 6 hours.
I always followed this guide:
http://forum.xda-developers.com/showthread.php?t=2265477
malybru said:
When I used to flash stock , it was normally a quick process.
Never anywhere near 6 hours.
I always followed this guide:
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
May I also ask another question? In the past I factory reset and wiped cache data through recovery mode, but it didn't unbrick, but is not my question. A few weeks ago, I used Odin and a recovery file not knowing I needed to also flash my rom, so I just ran the recovery file. My phone booted normally except now I cannot access recovery mode. Can I just flash my rom following the steps without re wiping cache because I already did while my phone was bricked. It was just that recovery file that messed that up because the website wasn't clear.
Are you talking about ClockworkMod?
If so , it is important to flash the correct one for your phone.
Also , when you say "ROM" , are you talking about a custom ROM , or stock firmware?
malybru said:
Are you talking about ClockworkMod?
If so , it is important to flash the correct one for your phone.
Also , when you say "ROM" , are you talking about a custom ROM , or stock firmware?
Click to expand...
Click to collapse
I think it's stock firmware I got it from Sammobile.
If I were you , I would start again from scratch.
Flash the stock firmware in Odin.
Then , if you want , install a custom recovery ( ClockworkMod ) and a custom ROM.
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Try to flash G920FXXU5DQA7 (CSC code:BTU)
chemeleon said:
Hi, I recently tried to get my phone unlocked. I watched the guy do it, he flashed an older modem and then flashed a UAE firmware.
My original is O2 UK, and I'd like to revert to this firmware as the About Device section shows up with Unted Arab Emirates and the mobile networks section shows LTE rather than 4G.
I have tried flashing the latest revision of the O2 stock rom and odin fails attempting to write sboot.bin with the error message SW Rev. fail (I don't recall the exact numbers after this) appearing on the phone.
I am guessing this is the secure boot loader, which I am aware you can't downgrade, but is there any way of flashing this stock rom since I know it is compatible with the phone?
Click to expand...
Click to collapse
You could possibly use smartswitch if you have the serial number of the phone which would download the default firmware that the phone came with if odin fails again
Yes i agree, smartswitch could be your best option.
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
Yeah looks like this is a bootloader issue, it won't let you install a firmware which contains an older bootloader, only thing I can is to download the latest non branded UK firmware and see if that flashes.
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
chemeleon said:
Thanks for the suggestions. Tried Smart Switch, same error. It appears on the phone as sw rev. check fail.
What exactly is the problem here? Is it that the installed firmware has a newer bootloader than the most recent O2 firmware? In which case is there any way around it?
Click to expand...
Click to collapse
LollosoSi said:
I'm getting this error too with Device 4 Binary 3 but i didn't find the right firmware yet
I hope in Nougat release
Click to expand...
Click to collapse
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
forumber2 said:
As I said before;
Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
You could try using samfirm which a windows application which downloads samsung firmwares
LollosoSi said:
Sammobile is under maintenance right now and there are no mirrors reasonably fast... 8 hours for a download.
Anyway update is coming these weeks, I'll wait
Click to expand...
Click to collapse
As @sofir786 said, you can use SamFirm;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open it, set the settings like this;
sofir786 said:
You could try using samfirm which a windows application which downloads samsung firmwares
Click to expand...
Click to collapse
Wow I didn't know, it works thanks
forumber2 said:
As I said before; Try to flash G920FXXU5DQA7 (CSC code:BTU)
Click to expand...
Click to collapse
I'll try flashing when the download finishes
Edit:
WORKING!
I used last(I think) ITV
File names:
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CSC: CSC_ITV_G920FITV5DQA2_CL10387678_QB12242913_REV02_user_low_ship.tar
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar
Samsung updated their bootloaders to 4XX in September/October so you cant flash back an older one or downgrade,so the only solution you have is to flash the new one which is 5XX released this year.
Flashed the latest UK revision (not the O2 branded one) and it worked
chemeleon said:
Flashed the latest UK revision (not the O2 branded one) and it worked
Click to expand...
Click to collapse
Told you
Helo,
I have big problem with flash new firmware to SG955F with odin, I tried many diferent firmware for SG955F and always almost same error: KERNEL REV. CHECK FAIL. DEVICE:3, BINARY: 1
Tried in odin flash only AP, and all other comnination but same error....sometimes is device :3 binary:1, device:4 binary:1....and like that
Someone knows some solution how can I solve this problem???
xoxo7 said:
Helo,
I have big problem with flash new firmware to SG955F with odin, I tried many diferent firmware for SG955F and always almost same error: KERNEL REV. CHECK FAIL. DEVICE:3, BINARY: 1
Tried in odin flash only AP, and all other comnination but same error....sometimes is device :3 binary:1, device:4 binary:1....and like that
Someone knows some solution how can I solve this problem???
Click to expand...
Click to collapse
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
spawnlives said:
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
Click to expand...
Click to collapse
this looks when I am in download mode befor i press start and before I get device and binary error:
https://ibb.co/in65De
Thanks for useful answer!
Tell me please how can I know which firmware i have to find now? Which bootloader number is for my phone?
On my phone I dont have now any firmware....I can go to download mode and twrp only
tnx
when i am in download mode:
https://ibb.co/in65De
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
Click to expand...
Click to collapse
I sloved it!
That was problem what you said....I always tried flash firmware with wrong bootloader number (1,2,3 bootloader nr), but I needed firmware with bootloader nr 4....when I tried firmware with bootloader version 4 everything was ok.
spawnlives said:
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
Click to expand...
Click to collapse
Does this apply to the CSC and AP too? Or is there a different way to tell the binary version of the AP and CSC? Because I get the error telling me I've fused 7 and bin 6 for CSC and fused 6 and bin 5 for AP.
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.m
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
Click to expand...
Click to collapse
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Elohim-Brown said:
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Click to expand...
Click to collapse
Since your on android 7 with Binary ( bootloader ) no.1 you can flash any firmware you want ( within reason )
Just remember if you update bootloader versions you can't downgrade.
If you want the latest version for your device use this PC app
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Download
extract firmware
flash with odin
spawnlives said:
Since your on android 7 with Binary ( bootloader ) no.1 you can flash any firmware you want ( within reason )
Just remember if you update bootloader versions you can't downgrade.
If you want the latest version for your device use this PC app
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Download
extract firmware
flash with odin
Click to expand...
Click to collapse
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Elohim-Brown said:
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Click to expand...
Click to collapse
Device X Binary Y error means you are trying flash older firmware than what is on your phone.
You can't downgrade ( binary/bootloader ) versions.
Your CSC code will generally be the country/network of where you live and is represented as XXX
If going to use frija then enter model number ( eg: SM-G955F ) and csc XXX.
List Of Samsung CSC Codes | Samsung Firmware CSC Codes - Tsar3000
The Complete Updated List of Samsung CSC Codes, Including all Samsung CSC Codes for the USA, Canada, And Samsung Global CSC codes (UK, Singapore, Italy, ...)
tsar3000.com
spawnlives said:
Device X Binary Y error means you are trying flash older firmware than what is on your phone.
You can't downgrade ( binary/bootloader ) versions.
Your CSC code will generally be the country/network of where you live and is represented as XXX
If going to use frija then enter model number ( eg: SM-G955F ) and csc XXX.
List Of Samsung CSC Codes | Samsung Firmware CSC Codes - Tsar3000
The Complete Updated List of Samsung CSC Codes, Including all Samsung CSC Codes for the USA, Canada, And Samsung Global CSC codes (UK, Singapore, Italy, ...)
tsar3000.com
Click to expand...
Click to collapse
Thanks alot again, well, fridja just automatically filled it for me.
Elohim-Brown said:
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Click to expand...
Click to collapse
It worked, thanks a lot. God bless you. I am so happy to be a part of this forum.
Hello everyone, I have another issue on my S9plus, I can't find the OEM unclock toggle in the device manager options,
It's SM-G965FXXXS7CSJ6
Any help?
Elohim-Brown said:
Hello everyone, I have another issue on my S9plus, I can't find the OEM unclock toggle in the device manager options,
It's SM-G965FXXXS7CSJ6
Any help?
Click to expand...
Click to collapse
have you waited 7 days without reboot?
No, do I have to change time and date to say 2016 and wait for seven days before I reboot?
No need to change time to 2016.
hello
my s7 flat showed a problem and didnt start
i tried to reset not solwed
i tried to install stock rom g930f german or turkey
odin fail allways or stuck not doing anything
i installed twrp
i wiped and formatted
and installed some different custom roms
so it is in booting
i want to install stock rom
is there a problem in rom version?
there are many s7 roms
how can i know which version i need to install?
there is g930f and g935
so what will i do?
PLEASE HELP
osmanoca said:
hello
my s7 flat showed a problem and didnt start
i tried to reset not solwed
i tried to install stock rom g930f german or turkey
odin fail allways or stuck not doing anything
i installed twrp
i wiped and formatted
and installed some different custom roms
so it is in booting
i want to install stock rom
is there a problem in rom version?
there are many s7 roms
how can i know which version i need to install?
there is g930f and g935
so what will i do?
PLEASE HELP
Click to expand...
Click to collapse
What is your model number?
What country/region are you using the device in? What carrier network is the device being used on?
You can't use g930f and g935, you can only use one of them and it has to be the same as the model number of your device, you can't use firmware from a different model number.
You need to find the newest firmware for your specific model number for your specific country/region/carrier.
Sent from my SM-S767VL using Tapatalk
details
Droidriven said:
What is your model number?
What country/region are you using the device in? What carrier network is the device being used on?
You can't use g930f and g935, you can only use one of them and it has to be the same as the model number of your device, you can't use firmware from a different model number.
You need to find the newest firmware for your specific model number for your specific country/region/carrier.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
ok i go to sammobiles firmwares
and i searched for galaxy s7 and turkey
i found many versions
one of them is this
https://sfirmware.com/downloads-file/142428/SM-G930F_1_20200316165830_5yqv647xim_fac
------------
FILE SIZE 2.47 GiB
MODEL Samsung SM-G930F
OPERATING SYSTEM Android Oreo 8.0.0
PDA/AP VERSION G930FXXS8ETCA
CSC VERSION G930FOJV8ETCA
MODEM/CP VERSION G930FXXS8ETCA
REGION TUR
COUNTRY Turkey
DESCRIPTION Turkcell, Vodafone, AVEA
HASH 80c64433c63e61ff6557f9c5d11cd54a
Read more at: https://sfirmware.com/downloads-file/142428/SM-G930F_1_20200316165830_5yqv647xim_fac
-------------
but all of them are fail in odin.
i select 4 files and click starts
it shows fail after 3 seconds as
Nand writes start
Single download
shoot.bin
__>
fail