Database Info

Paranoid Android 7.2.1 proximity sensor issue

I have flashed Paranoid Android 7.2.1 on my OnePlus One and I'm enjoying the build very much.
But flashing PA seems to have broken the proximity sensor. When a call comes in, the screen doesn't turn off.
I ran some diagnostic utilities and non of them discovers the proximity sensor.
I have been searching through the internet for a solution but failed to find a working fix.
Any help on this would be greatly appreciated.
Thanks.

It's a known issue, it has been reported to the developers. Hopefully it will be fixed in the next release.

I am not able to get it working,after installing my phone is stuck at OnePlus logo... Please help me

Flash the "Frankenstein firmware", issue will be solve : https://forum.xda-developers.com/oneplus-one/general/firmware-modem-oneplus-one-lollipop-t3300907

still no luck
any other solution ?
i am stuck at oneplus logo for nearly 5 min now,....

Can i use audio fx (flashable zip) from cos 13.1?

amitexpert2009 said:
still no luck
any other solution ?
i am stuck at oneplus logo for nearly 5 min now,....
Click to expand...
Click to collapse
Solution for what, proximity sensor? Or,having issues flashing PA? As for proximity sensor,it works fine with that firmware by MrSHME.If it is with PA,which build you've downloaded?

Mr.Ak said:
Solution for what, proximity sensor? Or,having issues flashing PA? As for proximity sensor,it works fine with that firmware by MrSHME.If it is with PA,which build you've downloaded?
Click to expand...
Click to collapse
I am also facing proximity sensor issue while in call. I see only one build 20th july. Is there any other build released too?
Sent from my One using Tapatalk

rajeev5252 said:
I am also facing proximity sensor issue while in call. I see only one build 20th july. Is there any other build released too?
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Yes but that was pulled off due to bugs.Did you flashed the firmware by MrSHME? If yes,can you post a screenshot of about phone?

Mr.Ak said:
Yes but that was pulled off due to bugs.Did you flashed the firmware by MrSHME? If yes,can you post a screenshot of about phone?
Click to expand...
Click to collapse
Thanks for ur reply.. Can u give me the link to that firmware if possible. I just clean flashed 20 th july build which is at official site.
Sent from my One using Tapatalk
---------- Post added at 05:35 PM ---------- Previous post was at 05:30 PM ----------
rajeev5252 said:
Thanks for ur reply.. Can u give me the link to that firmware if possible. I just clean flashed 20 th july build which is at official site.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Sorry mate i found the link. Thanks again for ur reply.
Sent from my One using Tapatalk
---------- Post added at 05:45 PM ---------- Previous post was at 05:35 PM ----------
@Mr.Ak i flashed the firmware but it doesnot solve the proximity issue. Screen is still on while on call. I dont think firmware should help in sensor issues. I may be wrong.
Sent from my One using Tapatalk

rajeev5252 said:
Thanks for ur reply.. Can u give me the link to that firmware if possible. I just clean flashed 20 th july build which is at official site.
Sent from my One using Tapatalk
---------- Post added at 05:35 PM ---------- Previous post was at 05:30 PM ----------
Sorry mate i found the link. Thanks again for ur reply.
Sent from my One using Tapatalk
---------- Post added at 05:45 PM ---------- Previous post was at 05:35 PM ----------
@Mr.Ak i flashed the firmware but it doesnot solve the proximity issue. Screen is still on while on call. I dont think firmware should help in sensor issues. I may be wrong.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Here's the link- https://www.androidfilehost.com/?fid=24385658843825783
It works fine for everyone.Can you share your about phone screenshot?

Mr.Ak said:
Here's the link- https://www.androidfilehost.com/?fid=24385658843825783
It works fine for everyone.Can you share your about phone screenshot?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my One using Tapatalk

rajeev5252 said:
Sent from my One using Tapatalk
Click to expand...
Click to collapse
Clean flash the ROM again and then flash the firmware.

I am not able to flash this rom.... please... phone is stuck on OnePlus logo....
F2fs file system is there.. should i convert it to ext4 ?

amitexpert2009 said:
I am not able to flash this rom.... please... phone is stuck on OnePlus logo....
F2fs file system is there.. should i convert it to ext4 ?
Click to expand...
Click to collapse
Yes,you must convert to ext4 in order for PA to work.

Mr.Ak said:
Yes,you must convert to ext4 in order for PA to work.
Click to expand...
Click to collapse
i am curious to know....why PA not work in f2fs...?
And should i convert everything to ext4.....like data,cache etc ?

amitexpert2009 said:
i am curious to know....why PA not work in f2fs...?
And should i convert everything to ext4.....like data,cache etc ?
Click to expand...
Click to collapse
Yes,everything. Don't know,PA team found f2fs unstable and placebo though,I think f2fs work fine on their OP3/3T build of PA.

I tried to use Paranoid Android but face following issues. Pls let me know if you ppl have some suggestions...
1. Phone suddenly drops to 0% and becomes dead
2. Phone heats up (really hot) while put on charge..
So I had to go back to Lineage where my device is quite stable. But I personally liked Paranoid. Pls reply back if you have some suggestions
Phone: Oneplus One

[7.1]MIUI v7.9.22(updated-23/10)

Xiaomi was founded in 2010 by serial entrepreneur Lei Jun, who believes that high-quality technology doesn't need to cost a fortune. At Xiaomi, we've brought together smart people from Google, Kingsoft, Microsoft, Motorola, Yahoo, and other Internet and tech companies from around the world to bring that vision to life. We create remarkable hardware, software, and Internet services for – and with the help of – our Mi fans. We incorporate their feedback into our product range, which currently includes Mi 4, Mi 3, Mi Pad, Mi Box, Mi TV, Redmi 1S and Redmi Note, Mi Power Bank and other accessories. We sell direct to customers to keep our prices competitive. And with more than 18 million handsets sold in China in 2013 and products launched in Taiwan, Hong Kong, Singapore, Malaysia, Philippines, India and Indonesia, we are ready to go global.
Please follow us on Facebook, Twitter and Google+, and be sure to check back often so you don't miss anything. Our mantra: "Always believe that something wonderful is about to happen".
Click to expand...
Click to collapse
Member of:-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:-
Go to TWRP
Wipe cache / dalvik cache / data / system......
flash rom............ ( NOTE : Gapps included in rom )
Reboot
After first boot is completed REBOOT you are device ( Important)
(Note:- if you get error 7;then---- wipe cache/data/system and click on reboot to recovery and then flash rom zip without wiping)
Camera working partially now(23/10)
(Sometimes it stops working )
Workaround for it:- just reboot once!!
Will be giving a patch for volte soon!!!
Kernel:https://forum.xda-developers.com/xi...eacon-kerne-nougat-romsl-3s-prime-3x-t3667804
Romorted from redmi 4X
Credits
@nsytechno96 (me) for porting
@bawaviki for his beacon kernel
Xiaomi for device
xiaomi for miui
DON'T do zero brightness!!!!!!!!!!!
​
ROM download:-
https://drive.google.com/file/d/0BwyxRgNUhdXfajhJVFl2UWQ3dUE/view?usp=drivesdk
Flash lazyflasher too:-https://androidfilehost.com/?fid=457095661767148342​ROM OS Version: 7.x.x Nougat
ROM Kernel: Linux 3.x
Based On: MIUI

3rd party app camera work?

I am working on the camera bug
so you can expect patch in few days
Click to expand...
Click to collapse
Thanks to all who are helping me
(i Don't know their usernames)

This rom is multilanguage ?

Can I flash this rom with Dual Boot Patcher?

sir can we expect volte fix too?

Great effort! :good:

Not great...i flash this rom with wipe, reboot recovery, no errors but stuck on mi logo looong time...no boot system. I flash 2x no results.

what firmware is taken as a basis? Multirom or xiaomi.eu? or it's official redmi 4x?

stuck at mi logo .
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
kemoti said:
Not great...i flash this rom with wipe, reboot recovery, no errors but stuck on mi logo looong time...no boot system. I flash 2x no results.
Click to expand...
Click to collapse
mee too stucked !!

vjadhikari said:
stuck at mi logo .
---------- Post added at 08:17 PM ---------- Previous post was at 08:15 PM ----------
mee too stucked !!
Click to expand...
Click to collapse
Did you disable dm-verity in twrp settings or simply flash lazy flasher zip and reboot to OS

psychopac said:
Did you disable dm-verity in twrp settings or simply flash lazy flasher zip and reboot to OS
Click to expand...
Click to collapse
ohhh ****kkk how can i forget lazy flashr omg
flashing again , thnx for reminding bro .

kemoti said:
This rom is multilanguage ?
Click to expand...
Click to collapse
yes
junglist21 said:
what firmware is taken as a basis? Multirom or xiaomi.eu? or it's official redmi 4x?
Click to expand...
Click to collapse
official miui of redmi 4X

kemoti said:
Not great...i flash this rom with wipe, reboot recovery, no errors but stuck on mi logo looong time...no boot system. I flash 2x no results.
Click to expand...
Click to collapse
Disable dm-verify

what do you say about the camera?
how long to wait fix?
you yourself will repair the camera?

junglist21 said:
what do you say about the camera?
how long to wait fix?
you yourself will repair the camera?
Click to expand...
Click to collapse
maybe it will take a week
i am working on it!!

There are several similar roms

fxsheep said:
Can I flash this rom with Dual Boot Patcher?
Click to expand...
Click to collapse
No
mini can not be used as a subsystem
---------- Post added at 04:18 AM ---------- Previous post was at 04:14 AM ----------
junglist21 said:
what firmware is taken as a basis? Multirom or xiaomi.eu? or it's official redmi 4x?
Click to expand...
Click to collapse
MIUI pro

Does volte work in this rom?

zzw123 said:
No
mini can not be used as a subsystem
---------- Post added at 04:18 AM ---------- Previous post was at 04:14 AM ----------
MIUI pro
Click to expand...
Click to collapse
official miui
not miui pro

Root P20?

Did anyone obtained root yet?
Could it be possible to use an Mate 10 Pro root method or twrp (because of the similiar hardware components)?

Someone would need to test this, but Magisk has had support for the more recent Huawei phones. In best case, you just need to unlock bootloader and then flash Magisk.

Thesinistah86 said:
Did anyone obtained root yet?
Could it be possible to use an Mate 10 Pro root method or twrp (because of the similiar hardware components)?
Click to expand...
Click to collapse
Have you unlocked your boot loader yet ?
---------- Post added at 10:26 AM ---------- Previous post was at 10:25 AM ----------
Thesinistah86 said:
Did anyone obtained root yet?
Could it be possible to use an Mate 10 Pro root method or twrp (because of the similiar hardware components)?
Click to expand...
Click to collapse
Have you unlocked your bootloader yet ?

mchtt said:
Have you unlocked your boot loader yet ?
---------- Post added at 10:26 AM ---------- Previous post was at 10:25 AM ----------
Have you unlocked your bootloader yet ?
Click to expand...
Click to collapse
I only have an demo unit atm, but i will get my device in the next few weeks.
I guess huawei will provide the possibility of unlocking the bootloader, they're very fast with it.
Otherwise it could be working with the 'general unlock code' (fastboot oem unlock UUUUUUUUUUUUUUUU).
I guess bootloader unlocking will be the smallest problem.

mrabcx said:
Someone would need to test this, but Magisk has had support for the more recent Huawei phones. In best case, you just need to unlock bootloader and then flash Magisk.
Click to expand...
Click to collapse
Isn't it mandatory to have an custom recovery to flash magisk? I don't think that the regular recovery will do. That's why i'm asking about the possibility of flashing the mate10pro-twrp. That probably work, but i'm not a pro ?

My P20 Lite is already Bootloader Unlocked, so the 20 and Pro should not be difficult to unlock.

mchtt said:
My P20 Lite is already Bootloader Unlocked, so the 20 and Pro should not be difficult to unlock.
Click to expand...
Click to collapse
Hi, how have you managed unlocking the bootloader ? I've bought a P20 Lite and don't know how to do this

I followed this. If like me you are using a Mac you don't need to install drivers and adb.
http://rootmygalaxy.net/unlock-bootloader-on-huawei-devices/
---------- Post added at 07:47 PM ---------- Previous post was at 07:31 PM ----------
After unlocking it you can access eRecovery !
Do you think eRecovery will be enough to restore in case of failure with a fastboot treble system.img flash ?
I'm so tempted to go AOSP...

mchtt said:
I followed this. If like me you are using a Mac you don't need to install drivers and adb.
http://rootmygalaxy.net/unlock-bootloader-on-huawei-devices/
---------- Post added at 07:47 PM ---------- Previous post was at 07:31 PM ----------
After unlocking it you can access eRecovery !
Do you think eRecovery will be enough to restore in case of failure with a fastboot treble system.img flash ?
I'm so tempted to go AOSP...
Click to expand...
Click to collapse
I would advice until we have twrp that it's not worth the risk just in case.
Sent from my OnePlus 5 using XDA Labs

One can install Magisk without TWRP and flashing ROMs and switching back to stock via adb is also quite feasible. There are plenty of guides on how to do these things in the Mate 10 forums. I guess the process will be quite similar for the P20. Of course, TWRP makes things easier .... but it must first be made available and that can take time.

Mate10 is 8.0
P20 is 8.1
But I think root will be easy if you use magisk

To use magisk we need either a custom recovery or the stock boot image, which I've had no luck on dumping yet. Anyone any ideas?

Magisk works just fine
Twrp does not. But eventually will
https://mega.nz/#!jlBFWSwR!wzozF9Zi189upCm6mCVjTDEUcG9SpDHbNOPewKJ7so8
Don't blame me for sharing it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Magisk works just fine
Twrp does not. But eventually will
https://mega.nz/#!jlBFWSwR!wzozF9Zi189upCm6mCVjTDEUcG9SpDHbNOPewKJ7so8
Don't blame me for sharing it View attachment 4467520View attachment 4467521
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Thanks man ! What is the partition's name in huawei devices to flash the patched boot img ?

Jb-kun said:
Thanks man ! What is the partition's name in huawei devices to flash the patched boot img ?
Click to expand...
Click to collapse
Fastboot flash ramdisk CLT-L29-MAGISK.img
Sent from my DUK-L09 using Tapatalk
I've created a thread about rootin p20 pro

Mmh I'm afraid you guy has provided a wrong rooting method cause after flashing your image, my P20 has now a bootloop issue :x

LastStandingDroid said:
Magisk works just fine
Twrp does not. But eventually will
https://mega.nz/#!jlBFWSwR!wzozF9Zi189upCm6mCVjTDEUcG9SpDHbNOPewKJ7so8
Don't blame me for sharing it View attachment 4467520View attachment 4467521
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Can you tell us the detail of the process ? And where did you get the stock boot image ?

Jb-kun said:
Mmh I'm afraid you guy has provided a wrong rooting method cause after flashing your image, my P20 has now a bootloop issue :x
Click to expand...
Click to collapse
Did u have CLT-L29?
otonieru said:
Can you tell us the detail of the process ? And where did you get the stock boot image ?
Click to expand...
Click to collapse
There's a firmware released for P20 pro a while ago.
Sent from my DUK-L09 using Tapatalk
---------- Post added at 12:48 PM ---------- Previous post was at 12:07 PM ----------
Oh so you guys have regular p20?
If so I can patch the P20 boot (but it's Al00/Tl00)
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Did u have CLT-L29?
There's a firmware released for P20 pro a while ago.
Sent from my DUK-L09 using Tapatalk
---------- Post added at 12:48 PM ---------- Previous post was at 12:07 PM ----------
Oh so you guys have regular p20?
If so I can patch the P20 boot (but it's Al00/Tl00)
Click to expand...
Click to collapse
Nvm mate,
I managed to patch the ramdisk of P20 Pro L29
Thank you for the offer, but mostly for the info. At least i know for sure that those method still work.

otonieru said:
Nvm mate,
I managed to patch the ramdisk of P20 Pro L29
Thank you for the offer, but mostly for the info. At least i know for sure that those method still work.
Click to expand...
Click to collapse
Please do share your patched boot.
As it will help others
Sent from my DUK-L09 using Tapatalk

New V9.5.11.0.OEIMIFA update for Redmi Note 5 Pro/Global

Update : It is made official now.
Fasboot ROM
GDrive - http://bit.ly/2J1VMY1
Direct - http://bit.ly/2J13ktX
Changelog:
Fixed bugs
Improved system stability
Incremental OTA
http://bit.ly/2GJ4xQT
Full Recovery Rom
Direct link
http://bit.ly/2s6meEy
GDrive Link
http://bit.ly/2LnWrR9

Ghoul159 said:
Changelog:
Fixed bugs
Improved system stability
Incremental OTA
http://bit.ly/2GJ4xQT
Full Recovery Rom
Direct link
http://bit.ly/2s6meEy
GDrive Link
http://bit.ly/2LnWrR9
Click to expand...
Click to collapse
Thanks man. I'll try this and will update my thread.

devcon69 said:
Thanks man. I'll try this and will update my thread.
Click to expand...
Click to collapse
No probs

How can I install this if I have TWRP? Can I just flash the zip? Which one?

Robert- said:
How can I install this if I have TWRP? Can I just flash the zip? Which one?
Click to expand...
Click to collapse
Yes just install.zip via twrp..just incremental

For some reason my device is not passing safety net .
Other than that it seems ok. Some updates in the camera app.

There is also some minor stuff
- now You can mute the phone / enable do not disturb mode from volume panel
- there is a white box "HDR" under HDR switch in MIUI camera app when HDR is anabled (also when auto-mode decides to enable it) (HDR still screw up the pics at least for me)
- when you take a screenshot, a miniature version will apear in top right corner and stay there bouncing for a few seconds. Then You click on it it's going to show You the whole pic. You will be also able to send, edit and delete it from that position
Sent from my whyred using XDA Labs

i get a "updater process ended with error: 7" when trying to flash it from twrp
edit: 8.1.0 OPM1.1711019.011 stable 9.5.6.0 (oeimifa)

Can also be used using system updater? I'm on 9.5.6.0 global

My Device is not rooting after the update of 9.5.6 Oreo and stuck while rooting on powered by Android starting screen help me

clubvibe said:
Can also be used using system updater? I'm on 9.5.6.0 global
Click to expand...
Click to collapse
Yes you can. But OTA Incremental did not work for me. Full recovery did.
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
Hampa_D said:
i get a "updater process ended with error: 7" when trying to flash it from twrp
edit: 8.1.0 OPM1.1711019.011 stable 9.5.6.0 (oeimifa)
Click to expand...
Click to collapse
Try recovery rom with miui system updater. Worked for me.

I am currently on beta 8.5.10. What would be the safest way to update to 9.5.11 (preferably using TWRP, I don't mind wiping data)?

devcon69 said:
Yes you can. But OTA Incremental did not work for me. Full recovery did.
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
Try recovery rom with miui system updater. Worked for me.
Click to expand...
Click to collapse
It says it's a beta version though when using Miui system updater. It did with your ROM as well?

devcon69 said:
Yes you can. But OTA Incremental did not work for me. Full recovery did.
---------- Post added at 12:02 AM ---------- Previous post was at 12:01 AM ----------
Try recovery rom with miui system updater. Worked for me.
Click to expand...
Click to collapse
got them links but dosent that wipe my phone?

Robert- said:
For some reason my device is not passing safety net .
Other than that it seems ok. Some updates in the camera app.
Click to expand...
Click to collapse
You have to download and flash "Universal Safetynet fix" - Google it.
Sent from my Redmi Note 5 pro using Tapatalk

You can all flash with stock Mi recovery without any problem, just use Xiaomi ADB and his sideload function!
It will go something like this:
XiaomiADB.exe sideload_miui miui_HMNote5HMNote5ProGlobal_V9.5.11.0.OEIMIFA_691301a005_8.1.zip

After dirty flashing this update, camera screen went blank. I flashed full rom. Was earlier on v9.5.6.0

Pat123 said:
I am currently on beta 8.5.10. What would be the safest way to update to 9.5.11 (preferably using TWRP, I don't mind wiping data)?
Click to expand...
Click to collapse
First flash 9.5 rom via twrp then after boot flash 9.5.11 update. Also don't forget to flash lazyflasher if you don't want mi recovery replacing twrp.

prit1486 said:
After dirty flashing this update, camera screen went blank. I flashed full rom. Was earlier on v9.5.6.0
Click to expand...
Click to collapse
Resolved after wiping davlic and cache in twrp

When I try to flash Incremental OTA with TWRP it says "failed".
When I try to install with OTA, (choose update package) it says "it's not allowed to upgrade to unofficial ROM package".
I am running 9.5.6.0 unlocked with TWRP and root.
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Recovery] TWRP with Dynamic Device Name for Redmi 6 Pro

Whats Special Over Official TWRP:
Fixed partition mounting issues
Fixed qseecomd
Patched proprietary blobs
Implemented Dynamic Device Name Feature
About Dynamic Device Name:
Redmi 6 Pro has two different codenames "sakura_india" for devices in Indian devices & "sakura" for all other. This makes things harder when you try to flash ROM that have "sakura_india" codename e.g: MIUI India, in such cases you have to edit the edify script (updater-script) or change the recovery. This TWRP build solves this problem by allowing the user to change device codename with one click. Note: The change will be persisted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sources:
Modified TWRP
Device Tree

Downloads
20190429 - Initial Build, Fixed Mounting Issues & Encryption/Decryption, Implemented Dynamic Device Name Feature

Reserved

Pru work sar

I faced like this problems thanks for this recovery change then now I am test this recovery thanks

Hi sir i am using redmi note 6 pro sakura device, if i flash this TWRP so i can installed Redmi 6 pro custom rom on Redmi note 6 pro sakura device.

dattagiri said:
Hi sir i am using redmi note 6 pro sakura device, if i flash this TWRP so i can installed Redmi 6 pro custom rom on Redmi note 6 pro sakura device.
Click to expand...
Click to collapse
The codename of RN6pro is tulip.

Bro can now
---------- Post added at 04:22 PM ---------- Previous post was at 04:21 PM ----------
Bro can now we rollback to miui rom from pixel experience rom by using this recovery

Wow looks good

Good one!
I am using this recovery right now and didnt face any issues so far. kudos :good::good::good::good:

Samurai_007 said:
Bro can now
---------- Post added at 04:22 PM ---------- Previous post was at 04:21 PM ----------
Bro can now we rollback to miui rom from pixel experience rom by using this recovery
Click to expand...
Click to collapse
Ya you can flash but may lock bootloader if else your luck

Sir how to install this
Please give method to install this

urastogi65 said:
Sir how to install this
Please give method to install this
Click to expand...
Click to collapse
Which rom want to install?

chinnappadoss said:
Which rom want to install?
Click to expand...
Click to collapse
I want to install this recovery in android one room

Finally No more mount errors, thanks for your amazing work

you are awesome mahn
Devil7DK said:
20190429 - Initial Build, Fixed Mounting Issues & Encryption/Decryption, Implemented Dynamic Device Name Feature
Click to expand...
Click to collapse
you made the work so easy for people having redmi 6 pro in india to install global beta roms to our device. Thank you Sir.

Wow!! No more fastboot flashing to unbrick :good:
---------- Post added at 02:38 PM ---------- Previous post was at 02:37 PM ----------
urastogi65 said:
I want to install this recovery in android one room
Click to expand...
Click to collapse
Download the image and flash In fastboot via this code
fastboot flash recovery twrpname.img

Flashed this recovery, trying to flash the latest firmware on sakura, but still same error, this is for sakura_india your device is sakura

Hi, thanks for your work. I am using your twrp version. I am not able to decrypt data when booting on twrp. Same is true with official twrp version.
I am certainly missing something.. but don't know what. Any ideas?
Regards

fjunk said:
Hi, thanks for your work. I am using your twrp version. I am not able to decrypt data when booting on twrp. Same is true with official twrp version.
I am certainly missing something.. but don't know what. Any ideas?
Regards
Click to expand...
Click to collapse
i think u have to reformat the data partition.. try erase the data partition..