Database Info

Looking for emmc firehose mbn file (violet)

Hello everyone, currently after my bad decision to flash keymaster file form Note 7, my Note 7 Pro is dead and don't have heart beat.
After a while I see only EDL working via testpoint on back cover. Now am stuck between two option to pay 30$ for auth. account or find emmc file.
I know nothing is free but i will try to find emmc firehose mbn file. If anyone have idea where can find be kind to share with me. Thanks in advance!
I think the name of the file will be prog_emmc_firehose_Sdm675_ddr.mbn or prog_emmc_firehose_Sdm6150_ddr.mbn

b0nb0n3v said:
Hello everyone, currently after my bad desiciot to flash keymaster file form Note 7, my Note 7 Pro is dead and don't have heart beat.
After a while I see only EDL woriking via testping on backcover. Now am stuck between two option to pay 30$ for auth. account or find emmc file.
I know nothing is free but i will try to find emmc firehose mbn file. If anyone have idea where can find be kind to share with me. Thanks in advance!
I think the name of the file will be prog_emmc_firehose_Sdm675_ddr.mbn or prog_emmc_firehose_Sdm6150_ddr.mbn
Click to expand...
Click to collapse
It will available in fastboot rom right ? ?

urstrulynaveen said:
It will available in fastboot rom right ? ?
Click to expand...
Click to collapse
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?

b0nb0n3v said:
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
Click to expand...
Click to collapse
This happend to me also i searched whole internet but sadly their is no firehose file for our violet available to bypass edl auth. I suggest the best way to reach nearest service center they flash it with mi flash via testpoints and its cheap not so coastly. Dont try to flash by your side alone u may trash ur partition tables situations may get worse.

Same here I don’t have any hope for this trash. Never gonna by a Xiaomi again. I remember in old redmi phones you didn’t need auth to flash edl
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
There was a Russian selling me auth account for 10$ but I bet he’s gonna scam so I didn’t try.
Anyway. Let me know if you find the firehose file or anything.

DeveloperOne said:
Same here I don’t have any hope for this trash. Never gonna by a Xiaomi again. I remember in old redmi phones you didn’t need auth to flash edl
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
There was a Russian selling me auth account for 10$ but I bet he’s gonna scam so I didn’t try.
Anyway. Let me know if you find the firehose file or anything.
Click to expand...
Click to collapse
Yes they are scamers and they use TeamViewer which may lead to hack your computer. So better is to rush on service center. Those good old days of redmi phones will never come back they are imposing more and more restrictions to devices.

my violet is dead !
my phones is also dead ....was trying to get back to miui 11 (android 9)from covrvus 6.5(android 10) because no sensors were working in corvus !
i got miui 11 but wifi was not working and sensors too ! tried flaashing many fastboot roms from offical miui sites but non of them fixed senors and wifi ! ...then tried flashing with old miflashtool probably 2014 version ... then flash system error came while flashing fastboot rom violet ....
then phone got switched off automaticaly ! and never started since then !
i looked up everything flashing with edl mode !
in miflashtool
earlier when bootloader it was showing "ceeee0ccc0" device name
now in miflashtool it is showing "COM20" or"COM10"
when i am flashing fastboot rom latest one with latest flashtool
it is showing "packet receive something something..." call paket ...etc
some time it shows "edl auth " then it ask to sign in my account after login ..
"Your Acount is bined to this system " but later ""Your account is not authorised for this operation !"
and hence the flashing stops with error !
if someone is seriously readying this you can reply and ask for screenshots
please ! i have lost all hopes ! i need some guidence and lil help !
I looked a way to bypass edl auth ...
but the video was of Redmi note 7 ! not pro
in there he used
some file "prog_emmc_firehose_Sdm610_ddr.mbn" somehing like that ...
he placed this file in images folder !
it skipped the edl auth ...and flashing continued !
maybe if i can get file
prog_emmc_firehose_Sdm675_ddr.mbn something like that of my phone
violet version for my chipset
maybe i can skip too auth edl ....
dont know ! just help please !

kankurcool said:
my phones is also dead ....was trying to get back to miui 11 (android 9)from covrvus 6.5(android 10) because no sensors were working in corvus !
i got miui 11 but wifi was not working and sensors too ! tried flaashing many fastboot roms from offical miui sites but non of them fixed senors and wifi ! ...then tried flashing with old miflashtool probably 2014 version ... then flash system error came while flashing fastboot rom violet ....
then phone got switched off automaticaly ! and never started since then !
i looked up everything flashing with edl mode !
in miflashtool
earlier when bootloader it was showing "ceeee0ccc0" device name
now in miflashtool it is showing "COM20" or"COM10"
when i am flashing fastboot rom latest one with latest flashtool
it is showing "packet receive something something..." call paket ...etc
some time it shows "edl auth " then it ask to sign in my account after login ..
"Your Acount is bined to this system " but later ""Your account is not authorised for this operation !"
and hence the flashing stops with error !
if someone is seriously readying this you can reply and ask for screenshots
please ! i have lost all hopes ! i need some guidence and lil help !
I looked a way to bypass edl auth ...
but the video was of Redmi note 7 ! not pro
in there he used
some file "prog_emmc_firehose_Sdm610_ddr.mbn" somehing like that ...
he placed this file in images folder !
it skipped the edl auth ...and flashing continued !
maybe if i can get file
prog_emmc_firehose_Sdm675_ddr.mbn something like that of my phone
violet version for my chipset
maybe i can skip too auth edl ....
dont know ! just help please !
Click to expand...
Click to collapse
Bro sadly there is no firehose file for violet. I had same issue earlier only solution is to go service center. They flash in edl takes just 10 mins charge around 180 rupees. U may try flashing via umt dongle or miracle thunder but i never recommendes that.

My RN7pro got also dead, I had to pay 1200rs to revive this phone by local mobile repairer. They flash it with UFI box. I made mistake no to go authorised service center. That technician looted me.

b0nb0n3v said:
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
Click to expand...
Click to collapse
hey dude can u pls help me? im on the same boat which u were on. i dont find that patched up emmc file of note 7 pro. flashing with the stock rom showing error in quolcomn softwares as well in mi flasher tool. pls help what to do now

[Guide] [Mediatek] Mi Authorized Account : Sad fate of Xiaomi Devices !

Hey Guys, This is Aryan (TechyMinati @An ASP) as We know, These days everyone is keen to install Custom ROMs & Recovery in their Devices, Sometimes the thing goes well and sometimes the devices HardBricks. Here we are basically talking about the Xiaomi Mediatek Devices & Their Fate.
Mediatek Devices have Download Mode or DA Mode, Which allows you to revive your devices even if it is hardbricked, So whats the error now ?
The case with Xiaomi Mediatek devices is entirely different, you cant flash your device without Mi Authorized Account or can be simply called Server Side SLA(Serial Link Authorization)
Lets Take a Deep Insight into working of this Mi Authorized Account
For those unaware, SP Flash Tools, short for SmartPhone Flash Tool is a tool that MediaTek distributes that allows flashing the OEM firmware back onto a MediaTek device, in case something goes wrong. Now, in this “hard-brick” condition, the device is able to enter the BROM “emergency-download” mode (EDL, for short). If you remember, BROM may implement security to prevent unauthorized modification to the device.
Most manufacturers implement very basic security; there are 2 main BROM security implementations:
SLA (Serial Link Authorization)
DAA (Download Agent Authorization)
A MediaTek device can have none, either or both. Usually a slightly modified version of the flash tool which contains a few secrets is enough to let anyone re-flash the device. Let’s quickly understand what these implementations are like and how they differ.
BROM exposes UART to communicate. In both cases, the device will generate a few random bytes which must be “decrypted” or simply processed to create a new string. If BROM validates the string, it’ll allow the host to issue many more instructions without errors, such as jumping to addresses or writing partitions. The difference between the two is, in SLA, BootROM performs the checks and in DAA, Download Agent (DA) performs the check. Download Agent is loaded by SP Flash Tool. On devices that implement SLA, you cannot load a DA file without completing the SLA challenge. On devices that implement DAA, the challenge is done by DA and a modified DA file is enough to bypass security (That is, assuming you manage to reverse things or have the BSP).
Whats Worse Now? Xiaomi Mediatek Devices Have SLA !
Xiaomi has special accounts (called Mi Authorized Accounts) that are given to service centers for repairing devices. These accounts are capable of requesting Authorization tokens to unlock BROM download on MediaTek devices (and other EDL equivalents for Qualcomm devices). Something that can be very easily fixed by a consumer and/or developer, is locked to service centers.
So How This Mi Authorized Account Work? How data exchange takes place to allow BROM to Proceed ?
Well with Mi Auth, The device generates 16 bytes of data and sends it to the server. The server checks if your account has authorization and returns 256 bytes of data. If the data is correct, BROM continues. Else it traps itself in an infinite loop, until it times-out due to no-command and reboots.
Our Beloved Friend @Agent_fabulous created a python script that imitates the same way the Mi Auth Works, But Sadly it doesnt work as of now. Your Can find the script here
A Ray Of Hope : Modified Preloader
Back in March 2020, When I got my Redmi 6A Bricked , I tried alot of ways to revive it , I ended up paying some bucks to shady guys on internet who revived my device via Mi Auth Over Remote Session Using TeamViewer. And More Sad part is most Xiaomi Service Centers don't know a single thing about Mi Auth, All they know is to replace motherboard LOL. Ah Noobs Everywhere.
After I revived my device , I began to think of making Antibrick that begonia already have ( Ah again thanks to @Agent_fabulous for his works) , Meanwhile, I found out the factory firmware for Redmi 6 & 6A., You see, every OEM receives a BSP for their platform of choice from the SoC manufacturer. Usually, the OEM will boot a clean version of this BSP on their hardware to get everything working, before the product team can start porting out the “skin” of Android that they advertise and ship their products with. This clean-version of the BSP build is often referred to as the “final factory firmware”.
We have factory firmware now ! Whats Next ?
After getting the factory rom, The thing you need to do first is boot that ROM safely in your devices (Note : If your phone is already hardbricked than this factory fw doesnt help, its for creating antibricks and other stuffs. ).
-You can boot your device to fastboot and fastboot flash all partitions from factory ROM
-after that turn off the device, attach it to your PC or Linux Machine)
-And Run dmesg on your device
-And Let device automatically power On.
Now if you see it register a cdc_acm device with description as MT65XX Preloader, Man You have Succeeded & Can flash without Mi Auth on that preloader.
After that try installing Any Other ROM, Say MemeUi 11, (Remember Dont Flash MIUI Preloader), Now extract Preloader & You Can Make a Flashable Zip xD. As Long as You are on that preloader, You have no worries , You can flash any ROM via SP Flash tool without any fancy auth.
Hope You Understood that What is Mi Auth & How it works on Mediatek Devices & How you can prepare a AntiBrick.
Press Thanks On this Thread xD
Credits:-
@Agent_fabulous (Mr. Kshitij ) for making me aware about Antibrick and How to prepare it. [He is developer from begonia Who Implemented VoLTE on Mediatek Chipset Based Device Redmi Note 8Pro ; He made antibrick too ; His Article Here (from which I've learned alot about Mi Auth)]
@An ASP (Aryan Sinha ; also known as TechyMinati) Making this article & Gathering info about Mi Auth .
I recommend you to give this XDA article a read, too!

We have factory firmware now ! Whats Next ?
After getting the factory rom, The thing you need to do first is boot that ROM safely in your devices (Note : If your phone is already hardbricked than this factory fw doesnt help, its for creating antibricks and other stuffs. ).
-You can boot your device to fastboot and fastboot flash all partitions from factory ROM
-after that turn off the device, attach it to your PC or Linux Machine)
-And Run dmesg on your device
-And Let device automatically power On.
Now if you see it register a cdc_acm device with description as MT65XX Preloader, Man You have Succeeded & Can flash without Mi Auth on that preloader.
After that try installing Any Other ROM, Say MemeUi 11, (Remember Dont Flash MIUI Preloader), Now extract Preloader & You Can Make a Flashable Zip xD. As Long as You are on that preloader, You have no worries , You can flash any ROM via SP Flash tool without any fancy auth
Click to expand...
Click to collapse
Can you please make an "easy-to-understand" step-by-step guide for noob like me? With download link of course xD, like this one https://forum.xda-developers.com/redmi-note-8-pro/development/rom-crdroid-6-x-t4124805/amp/
Thanks

adi4ntn said:
Can you please make an "easy-to-understand" step-by-step guide for noob like me? With download link of course xD, like this one https://forum.xda-developers.com/redmi-note-8-pro/development/rom-crdroid-6-x-t4124805/amp/
Thanks
Click to expand...
Click to collapse
Hey There, Here I'm talking about all Mediatek Devices, Creating Antibrick for all devices is a tough task. And I cannot do it alone. Show this guide to your respective device related developer. He will understand it for sure. Thanks

TechyMinati said:
Hey Guys, This is Aryan (TechyMinati @An ASP) as We know, These days everyone is keen to install Custom ROMs & Recovery in their Devices, Sometimes the thing goes well and sometimes the devices HardBricks. Here we are basically talking about the Xiaomi Mediatek Devices & Their Fate.
Mediatek Devices have Download Mode or DA Mode, Which allows you to revive your devices even if it is hardbricked, So whats the error now ?
The case with Xiaomi Mediatek devices is entirely different, you cant flash your device without Mi Authorized Account or can be simply called Server Side SLA(Serial Link Authorization)
Lets Take a Deep Insight into working of this Mi Authorized Account
For those unaware, SP Flash Tools, short for SmartPhone Flash Tool is a tool that MediaTek distributes that allows flashing the OEM firmware back onto a MediaTek device, in case something goes wrong. Now, in this “hard-brick” condition, the device is able to enter the BROM “emergency-download” mode (EDL, for short). If you remember, BROM may implement security to prevent unauthorized modification to the device.
Most manufacturers implement very basic security; there are 2 main BROM security implementations:
SLA (Serial Link Authorization)
DAA (Download Agent Authorization)
A MediaTek device can have none, either or both. Usually a slightly modified version of the flash tool which contains a few secrets is enough to let anyone re-flash the device. Let’s quickly understand what these implementations are like and how they differ.
BROM exposes UART to communicate. In both cases, the device will generate a few random bytes which must be “decrypted” or simply processed to create a new string. If BROM validates the string, it’ll allow the host to issue many more instructions without errors, such as jumping to addresses or writing partitions. The difference between the two is, in SLA, BootROM performs the checks and in DAA, Download Agent (DA) performs the check. Download Agent is loaded by SP Flash Tool. On devices that implement SLA, you cannot load a DA file without completing the SLA challenge. On devices that implement DAA, the challenge is done by DA and a modified DA file is enough to bypass security (That is, assuming you manage to reverse things or have the BSP).
Whats Worse Now? Xiaomi Mediatek Devices Have SLA !
Xiaomi has special accounts (called Mi Authorized Accounts) that are given to service centers for repairing devices. These accounts are capable of requesting Authorization tokens to unlock BROM download on MediaTek devices (and other EDL equivalents for Qualcomm devices). Something that can be very easily fixed by a consumer and/or developer, is locked to service centers.
So How This Mi Authorized Account Work? How data exchange takes place to allow BROM to Proceed ?
Well with Mi Auth, The device generates 16 bytes of data and sends it to the server. The server checks if your account has authorization and returns 256 bytes of data. If the data is correct, BROM continues. Else it traps itself in an infinite loop, until it times-out due to no-command and reboots.
Our Beloved Friend @Agent_fabulous created a python script that imitates the same way the Mi Auth Works, But Sadly it doesnt work as of now. Your Can find the script here
A Ray Of Hope : Modified Preloader
Back in March 2020, When I got my Redmi 6A Bricked , I tried alot of ways to revive it , I ended up paying some bucks to shady guys on internet who revived my device via Mi Auth Over Remote Session Using TeamViewer. And More Sad part is most Xiaomi Service Centers don't know a single thing about Mi Auth, All they know is to replace motherboard LOL. Ah Noobs Everywhere.
After I revived my device , I began to think of making Antibrick that begonia already have ( Ah again thanks to @Agent_fabulous for his works) , Meanwhile, I found out the factory firmware for Redmi 6 & 6A., You see, every OEM receives a BSP for their platform of choice from the SoC manufacturer. Usually, the OEM will boot a clean version of this BSP on their hardware to get everything working, before the product team can start porting out the “skin” of Android that they advertise and ship their products with. This clean-version of the BSP build is often referred to as the “final factory firmware”.
We have factory firmware now ! Whats Next ?
After getting the factory rom, The thing you need to do first is boot that ROM safely in your devices (Note : If your phone is already hardbricked than this factory fw doesnt help, its for creating antibricks and other stuffs. ).
-You can boot your device to fastboot and fastboot flash all partitions from factory ROM
-after that turn off the device, attach it to your PC or Linux Machine)
-And Run dmesg on your device
-And Let device automatically power On.
Now if you see it register a cdc_acm device with description as MT65XX Preloader, Man You have Succeeded & Can flash without Mi Auth on that preloader.
After that try installing Any Other ROM, Say MemeUi 11, (Remember Dont Flash MIUI Preloader), Now extract Preloader & You Can Make a Flashable Zip xD. As Long as You are on that preloader, You have no worries , You can flash any ROM via SP Flash tool without any fancy auth.
Hope You Understood that What is Mi Auth & How it works on Mediatek Devices & How you can prepare a AntiBrick.
Press Thanks On this Thread xD
Credits:-
@Agent_fabulous (Mr. Kshitij ) for making me aware about Antibrick and How to prepare it. [He is developer from begonia Who Implemented VoLTE on Mediatek Chipset Based Device Redmi Note 8Pro ; He made antibrick too ; His Article Here (from which I've learned alot about Mi Auth)]
@An ASP (Aryan Sinha ; also known as TechyMinati) Making this article & Gathering info about Mi Auth .
I recommend you to give this XDA article a read, too!
Click to expand...
Click to collapse
Thank you for this information. I have hard bricked my Redmi 6. It requires 'Authorized Mi Account' while flashing. Can you please help me out by providing a solution with steps and links?

sarthak_iitd23 said:
Thank you for this information. I have hard bricked my Redmi 6. It requires 'Authorized Mi Account' while flashing. Can you please help me out by providing a solution with steps and links?
Click to expand...
Click to collapse
Hey since You were on MIUI Preloader , You'll need Mi Authorised Account to flash it , Or Visit Service Center ! Thanks

TechyMinati said:
Hey since You were on MIUI Preloader , You'll need Mi Authorised Account to flash it , Or Visit Service Center ! Thanks
Click to expand...
Click to collapse
where can i find a trusted user?
Thx

UPDATE!
We can disable SLA and DAA with https://github.com/MTK-bypass/bypass_utility
See It’s now easy to bypass MediaTek’s SP Flash Tool authentication
Dev thread is at MediaTek / MTK - Auth Bypass (SLA/DAA) - Utility
https://megafon929.github.io/mtk
A tutorial can be found at [Tutorial] How to flash an MTK secure boot device without a custom DA
and tutorial for Xiaomi Redmi Note 9(merlin) can be found at https://forum.xda-developers.com/t/...d-flash-in-edl-with-no-auth-for-free.4229683/
Thanks

How/Where do i find an Authorized Xiaomi EDL Account Owner Nowadays?

As title.
Thanks.

gords78 said:
As title.
Thanks.
Click to expand...
Click to collapse
Hope this link helps
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
Good luck!

orb3000 said:
Hope this link helps
Xiaomi needs a better way to unbrick its devices instead of Authorized Mi Accounts
Xiaomi has locked down the EDL mode on all of its devices, making it nigh impossible to unbrick a device without an Authorized Mi Account. Read on for more!
www.xda-developers.com
Good luck!
Click to expand...
Click to collapse
Thanks, my device is a Redmi 6 with locked bootloader and I'm pretty sure there are no workarounds.

gords78 said:
Thanks, my device is a Redmi 6 with locked bootloader and I'm pretty sure there are no workarounds.
Click to expand...
Click to collapse
I've bricked my friend's redmi note 7 about a month ago and encountered the same issue as I flashed miui global rom into a chinese version via miflash tool with option 'flash all and lock'. She said she bought the device not from an official mi store but instead from a distributor which I think had flashed some modified chinese rom to appear as global one. So the device was in locked bootloader state, and after turning it on it always boots up into mi recovery. After done so many hours researching on the internet about how to bypass this lock bootloader and flash the right version of firmware in edl mode without authorized account, I've successfully unbrick the phone after flashing the firmware with a patched firehose file for redmi note 7. Try it mate. Hope it helps u. Cheers.

Prodai said:
I've bricked my friend's redmi note 7 about a month ago and encountered the same issue as I flashed miui global rom into a chinese version via miflash tool with option 'flash all and lock'. She said she bought the device not from an official mi store but instead from a distributor which I think had flashed some modified chinese rom to appear as global one. So the device was in locked bootloader state, and after turning it on it always boots up into mi recovery. After done so many hours researching on the internet about how to bypass this lock bootloader and flash the right version of firmware in edl mode without authorized account, I've successfully unbrick the phone after flashing the firmware with a patched firehose file for redmi note 7. Try it mate. Hope it helps u. Cheers.
Click to expand...
Click to collapse
Thanks. This is my exact situation too. Bought as global version on eBay but after locking the bootloader found out its Chinese. Was going to give the firehose method a go tonight but read id still need an authorised account. Will give it a go.

Solved to a certain degree. My handset doesn't support EDL as its a Mediatek chipset.

Prodai said:
I've bricked my friend's redmi note 7 about a month ago and encountered the same issue as I flashed miui global rom into a chinese version via miflash tool with option 'flash all and lock'. She said she bought the device not from an official mi store but instead from a distributor which I think had flashed some modified chinese rom to appear as global one. So the device was in locked bootloader state, and after turning it on it always boots up into mi recovery. After done so many hours researching on the internet about how to bypass this lock bootloader and flash the right version of firmware in edl mode without authorized account, I've successfully unbrick the phone after flashing the firmware with a patched firehose file for redmi note 7. Try it mate. Hope it helps u. Cheers.
Click to expand...
Click to collapse
I've bricked my poco f3. samen issue. tried Qfil an QPST. no luck. did you use a stock rom?

Try w
Prodai said:
I've bricked my friend's redmi note 7 about a month ago and encountered the same issue as I flashed miui global rom into a chinese version via miflash tool with option 'flash all and lock'. She said she bought the device not from an official mi store but instead from a distributor which I think had flashed some modified chinese rom to appear as global one. So the device was in locked bootloader state, and after turning it on it always boots up into mi recovery. After done so many hours researching on the internet about how to bypass this lock bootloader and flash the right version of firmware in edl mode without authorized account, I've successfully unbrick the phone after flashing the firmware with a patched firehose file for redmi note 7. Try it mate. Hope it helps u. Cheers.
Click to expand...
Click to collapse
Prodai said:
I've bricked my friend's redmi note 7 about a month ago and encountered the same issue as I flashed miui global rom into a chinese version via miflash tool with option 'flash all and lock'. She said she bought the device not from an official mi store but instead from a distributor which I think had flashed some modified chinese rom to appear as global one. So the device was in locked bootloader state, and after turning it on it always boots up into mi recovery. After done so many hours researching on the internet about how to bypass this lock bootloader and flash the right version of firmware in edl mode without authorized account, I've successfully unbrick the phone after flashing the firmware with a patched firehose file for redmi note 7. Try it mate. Hope it helps u. Cheers.
Click to expand...
Click to collapse
Try what, will please explain what you just suggested to try?

i have a redmi 5 rosy hard brick but i can enter edl without problem by using test point , flash stock rom and it worrking again

Guan Yu said:
i have a redmi 5 rosy hard brick but i can enter edl without problem by using test point , flash stock rom and it worrking again
Click to expand...
Click to collapse
Will you please share how you flashed?
Because with the MiFlash, you need Mi authorised account (about which I don't know how get one), so which tool you used?

True ayush Kushwaha said:
Will you please share how you flashed?
Because with the MiFlash, you need Mi authorised account (about which I don't know how get one), so which tool you used?
Click to expand...
Click to collapse
well you just need to check if your devices entered edl or not . you can check in device manager and make sure it named " Qualcoom Qloader 9008 " , then download stock firmware and click flashall.bat , dont use miflash

True ayush Kushwaha said:
Try w
Try what, will please explain what you just suggested to try?
Click to expand...
Click to collapse
Try flashing the right version firmware with a patched firehose file in EDL mode. You won't need authorized account anymore using these file. I was using the latest miflash tool at that time. So just give it a try first mate, hope it works for you too.

aaflan88 said:
I've bricked my poco f3. samen issue. tried Qfil an QPST. no luck. did you use a stock rom?
Click to expand...
Click to collapse
Yes i did. Qfil and QPST didn't work for me either as it still asked for an authorized account. So after researching more I found the solution; just flash the stock rom with a patched firehose file in edl mode. The latest miflash tool will do, and it won't ask for an authorized account anymore.

Guan Yu said:
i have a redmi 5 rosy hard brick but i can enter edl without problem by using test point , flash stock rom and it worrking again
Click to expand...
Click to collapse
How do you use the "test point" to access this mode. The truthful answer will allow me to fix my Note8, S6 edge, and my 1+.
Please explain

Delgoth said:
How do you use the "test point" to access this mode. The truthful answer will allow me to fix my Note8, S6 edge, and my 1+.
Please explain
Click to expand...
Click to collapse
search youtube usb edl cable or "your device name " + test point , make sure your device is recognized as Qloader 9008 not Diagnostics 900E then flash stock rom using miflash or cmd
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Guan Yu said:
search youtube usb edl cable or "your device name " + test point , make sure your device is recognized as Qloader 9008 not Diagnostics 900E then flash stock rom using miflash or cmdView attachment 5556141
Click to expand...
Click to collapse
I kinda know that part already. I've dealt with 9008 and 9006 mode before on multiple devices.
But when you use a test point what equipment are you using outside just a USB cable?

Delgoth said:
I kinda know that part already. I've dealt with 9008 and 9006 mode before on multiple devices.
But when you use a test point what equipment are you using outside just a USB cable?
Click to expand...
Click to collapse
i use this lol (no joking i dont have a tweezers and i dont want to buy a new usb cable )

Prodai said:
Try flashing the right version firmware with a patched firehose file in EDL mode. You won't need authorized account anymore using these file. I was using the latest miflash tool at that time. So just give it a try first mate, hope it works for you too.
Click to expand...
Click to collapse
Thank you very much, but please tell me where I can get the patched files?

Have a xiaomi mi 11 lite 5g ne I just need an authorized mi account for flashing the edl firehose and I’m set I have no idea about how to become authorized or what to do to even find the information to gain authorization so I’m stuck. Does anyone have the information to help me become authorized or is someone authorized who can help

edl authorized for qualcomm.my device is redmi 7 onclite
thanks

[Solved] [Need Help] Black Screen and Can't Enter Fastboot

I had an accident when flashing my phone and at this time I can't turn it on or enter fastboot mode, but if it is connected using usb it is still detected with the name "COM1".
I tried to flash again but was asked to enter an MI account on flashtool, when I logged in but it said "you are not authorized to download" so the flash process failed.
I hope someone here can help me with this problem.

I did some searching and it seems my problem requires MI auth account.

Maybe this can help you.
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com

Vega56 said:
Maybe this can help you.
XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone
XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!
www.xiaomitool.com
Click to expand...
Click to collapse
looks like I'm late reading your notification, but my problem has been resolved, thanks for the advice.
I found someone who opened an auth account and paid him $15 to fix it.

How to Unbrick Xiaomi Preloader and Unlock bootloader for Xiaomi Redmi 12c ( without using the mi unlock-tool) and for any MTK Redmi or Device (MTK)

Recently i hard bricked my newly released and bought Xiaomi Redmi 12c (earth) and it was a hard brick i mistakenly flashed preloader ( with sp flash-tool) while trying to unbrick it when it was still in a soft brick, so i didn't know what to do i went all over the internet i read forums threads all of that went on telegram some services were asking for 15USDT for xiaomi auth edl verification, so after i tried everythinh nothing worked i almost gave up until i gave mtkclient-main ( https://github.com/bkerler/mtkclient ) (check out this youtube guide on how to set it up
) one last chance after i found this thread online on havoctek website ( https://www.hovatek.com/blog/my-experience-unbricking-a-xiaomi-redmi-note-11-pro-5g-china/ ) and i tried all the commands sadly didn't work. But once i ran this command
py -3 mtk w vbmeta_a,vbmeta_system_a,vbmeta_vendor_a,vbmeta_b,vbmeta_system_b,vbmeta_vendor_b,md1img_a,spmfw_a,audio_dsp_a,pi_img_a,dpm_a,scp_a,sspm_a,mcupm_a,cam_vpu1_a,cam_vpu2_a,cam_vpu3_a,gz_a,lk_a,boot_a,vendor_boot_a,dtbo_a,tee_a,efuse,logo_a,logo_b,countrycode,md1img_b,spmfw_b,audio_dsp_b,pi_img_b,dpm_b,scp_b,sspm_b,mcupm_b,cam_vpu1_b,cam_vpu2_b,cam_vpu3_b,gz_b,lk_b,boot_b,vendor_boot_b,dtbo_b,tee_b,super,gsort,oem_misc1,cust,rescue,userdata vbmeta.img,vbmeta_system.img,vbmeta_vendor.img,vbmeta.img,vbmeta_system.img,vbmeta_vendor.img,md1img.img,spmfw.img,audio_dsp.img,pi_img.img,dpm.img,scp.img,sspm.img,mcupm.img,cam_vpu1.img,cam_vpu2.img,cam_vpu3.img,gz.img,lk.img,boot.img,vendor_boot.img,dtbo.img,tee.img,efuse.img,logo.bin,logo.bin,countrycode.img,md1img.img,spmfw.img,audio_dsp.img,pi_img.img,dpm.img,scp.img,sspm.img,mcupm.img,cam_vpu1.img,cam_vpu2.img,cam_vpu3.img,gz.img,lk.img,boot.img,vendor_boot.img,dtbo.img,tee.img,super.img,gsort.img,oem_misc1.img,cust.img,rescue.img,userdata.img --preloader=preloader_pissarro.bin
after i ran this command everything changed the preloaoder that wa bricked came back to normal and i unlocked the device bootloader without using the official app to unlcok again caise it said i cannot unlock twice in a month the tool i used was from technobuzz.net it worked perfectly i could not recommend it enough link of website- https://www.technobuzz.net/unlock-bootloader/ or better still watch their video on youtube on how they did it
the bootloader unlock file and drivers are attached here so you should stress your self in looking for it
and i flashed my STOCK ROM on my device with mi flash since you needed an unlocked bootloader to flash.
so thank you for taking your time in reading if it helped just leave a like and good luck with the unbricking
AND MAKE SURE YOU CHEK YOUR IMEI NUMBER ON https://www.mi.com/global/verify/#/en/tab/imei AND CONFIRM YOUR ORIGINAL ROM WHETHER INTERNATIONAL(GLOBAL) OR EUROPE OR CHINA INDIA RUSSIA ETC CAUSE IF YOU FLASH WRONG (region) ROM WITH PRELOADER YOUR DEIVCE MIGHT BRICK.

IMO this thread is misplaced: it's not a general question but a guide

xXx yYy said:
IMO this thread is misplaced: it's not a general question but a guide
Click to expand...
Click to collapse
Please how do I move it to a guide or how can I post a guide tnx <3

Ask mods to do so.

xXx yYy said:
Ask mods to do so.
Click to expand...
Click to collapse
Please how can I ask mods to do so

xXx yYy said:
IMO this thread is misplaced: it's not a general question but a guide
Click to expand...
Click to collapse
Thanks a lot!
Gudaji said:
Please how can I ask mods to do so
Click to expand...
Click to collapse
I've found the above recommendation by accident and moved your thread to
Android General
Android root tutorials, one-click root tools, ROMs and other Android modifications can be found in this forum for devices without a dedicated device forum
forum.xda-developers.com
At the bottom of every post including the opening post (OP) of a thread you find the "Report" button. In case you require moderators assistance or if you observe a rule violation, use that button to alert the moderators team.
Regards
Oswald Boelcke
Senior Moderator

Gudaji said:
Recently i hard bricked my newly released and bought Xiaomi Redmi 12c (earth) and it was a hard brick i mistakenly flashed preloader ( with sp flash-tool) while trying to unbrick it when it was still in a soft brick, so i didn't know what to do i went all over the internet i read forums threads all of that went on telegram some services were asking for 15USDT for xiaomi auth edl verification, so after i tried everythinh nothing worked i almost gave up until i gave mtkclient-main ( https://github.com/bkerler/mtkclient ) (check out this youtube guide on how to set it up
) one last chance after i found this thread online on havoctek website ( https://www.hovatek.com/blog/my-experience-unbricking-a-xiaomi-redmi-note-11-pro-5g-china/ ) and i tried all the commands sadly didn't work. But once i ran this command
py -3 mtk w vbmeta_a,vbmeta_system_a,vbmeta_vendor_a,vbmeta_b,vbmeta_system_b,vbmeta_vendor_b,md1img_a,spmfw_a,audio_dsp_a,pi_img_a,dpm_a,scp_a,sspm_a,mcupm_a,cam_vpu1_a,cam_vpu2_a,cam_vpu3_a,gz_a,lk_a,boot_a,vendor_boot_a,dtbo_a,tee_a,efuse,logo_a,logo_b,countrycode,md1img_b,spmfw_b,audio_dsp_b,pi_img_b,dpm_b,scp_b,sspm_b,mcupm_b,cam_vpu1_b,cam_vpu2_b,cam_vpu3_b,gz_b,lk_b,boot_b,vendor_boot_b,dtbo_b,tee_b,super,gsort,oem_misc1,cust,rescue,userdata vbmeta.img,vbmeta_system.img,vbmeta_vendor.img,vbmeta.img,vbmeta_system.img,vbmeta_vendor.img,md1img.img,spmfw.img,audio_dsp.img,pi_img.img,dpm.img,scp.img,sspm.img,mcupm.img,cam_vpu1.img,cam_vpu2.img,cam_vpu3.img,gz.img,lk.img,boot.img,vendor_boot.img,dtbo.img,tee.img,efuse.img,logo.bin,logo.bin,countrycode.img,md1img.img,spmfw.img,audio_dsp.img,pi_img.img,dpm.img,scp.img,sspm.img,mcupm.img,cam_vpu1.img,cam_vpu2.img,cam_vpu3.img,gz.img,lk.img,boot.img,vendor_boot.img,dtbo.img,tee.img,super.img,gsort.img,oem_misc1.img,cust.img,rescue.img,userdata.img --preloader=preloader_pissarro.bin
after i ran this command everything changed the preloaoder that wa bricked came back to normal and i unlocked the device bootloader without using the official app to unlcok again caise it said i cannot unlock twice in a month the tool i used was from technobuzz.net it worked perfectly i could not recommend it enough link of website- https://www.technobuzz.net/unlock-bootloader/ or better still watch their video on youtube on how they did it
the bootloader unlock file and drivers are attached here so you should stress your self in looking for it
and i flashed my STOCK ROM on my device with mi flash since you needed an unlocked bootloader to flash.
so thank you for taking your time in reading if it helped just leave a like and good luck with the unbricking
AND MAKE SURE YOU CHEK YOUR IMEI NUMBER ON https://www.mi.com/global/verify/#/en/tab/imei AND CONFIRM YOUR ORIGINAL ROM WHETHER INTERNATIONAL(GLOBAL) OR EUROPE OR CHINA INDIA RUSSIA ETC CAUSE IF YOU FLASH WRONG (region) ROM WITH PRELOADER YOUR DEIVCE MIGHT BRICK.
Click to expand...
Click to collapse
where is this preloader_pissarro.bin file i am not findind it

marsiomisterios said:
where is this preloader_pissarro.bin file i am not findind it
Click to expand...
Click to collapse
It's In your fiware unzip ur stock rom