Database Info

[Guide] [UNBRICK] [SUCCEEDED] Redmi Note 5 Pro | Antirollback | No Fastboot | Fix

Hello All,
I've found a solution for unbrick Redmi Note 5 Pro caused by AntiRoll Back..
Things You Needed !!
1. Open browser and login to the MIUI Forum. Post MI ID there cuz Authorized Mi ID Needed for Flashing. (Use Google Transtlate)
http://en.miui.com/a-234.html
3.Qualcomm HS-USB QDLoader 9008 ( If Already Installed Don't Mind) ...> https://goo.gl/9E3bKq
4. Use This MiFlash Tool ...> http://https://c.mi.com/forum.php?mod=attachment&aid=MjY3MDA2N3xiNDQzMzE2YXwxNTMxNTM2NjQ1fDB8MTIyMDk4OQ%3D%3D
5.Mind..:laugh:
Step 1 :-
Download latest MIUI 10 Fastboot ROM And Extract It. tgz to zip.
Step 2 :-
Download and install Qualcomm Hs-USB QDLoader 9008 Drivers
Step 3 :-
Connect your device to your PC via TestPoint If You don't know
check this thread http://en.miui.com/thread-2171064-1-1.html:good:
Step 4:-
Download and extract MiFlash Tool v2018.5.28.0
Open MiFlash Tool
Browse ROM Folder - OK
Start Flash..:good:
Ster 5 :-
Login to Your Mi Account which is binded with the device. Otherwise couldn't flash your device !
After Login Flash Without Any ERRORS !
--- HAPPY FLASHING --
Don't Say Thanks.. Hit THANKS Button for Supporting Me:laugh::laugh:

did you succeed?

ling mi flash eror

Dimas Aji Prasetyo said:
ling mi flash eror
Click to expand...
Click to collapse
_en.miui.com/forum.php?mod=viewthread&tid=3014918&highlight=MiFlash%2BTool%2Bv2018.5.28.0

Test Point method Voids Warranty AFAIK
So, try only if you don't have access to any Xiaomi Service Center
Official Service Centers unbrick your phones for free within warranty
Instead of this try n see if Deep Flash Cable method works

Redmi note 5 whyred rollback
unauthorized xiaomi acount, wwhy?

Dimas Aji Prasetyo said:
unauthorized xiaomi acount, wwhy?
Click to expand...
Click to collapse
You need to get authorization by applying in the MIUI forum. You can get the link in the other thread.

Bricked
This solution not work for me! My devices was bricked but PC still recognize EDL 9008 Com port. When press flash, Miflash said: "cannot receive hello packet"

Check this thread
http://en.miui.com/thread-2171064-1-1.html

it hasn't worked for anyone i know so far. waiting fro PM or notifictaion from russian forum. will try again. maybe then will send notification when they add th account

UID Authorization
Why do you have permissions to give authorization to the users ID? Youre going to give the instructions to each repply to your post or youre going to wait until July 16?
Thanks for your work, im very depressed because i bricked a brand new phone and i selled the old .

[QUOTE="palarcon, post: 77074185, member: 6643300"]Why do you have permissions to give authorization to the use
uid or mi id?

deleted

Maxxash said:
The instruction provided in the post is useless for the devices bricked with the latest ARB implementation by Xiaomi since these devices would not send a hello packet in EDL mode. The op just reposted the info from the old miui.com thread that has nothing to do with the current situation.
Click to expand...
Click to collapse
It works with the provited miui flash tool, start to flash bu ask for mi credentials and stop the download for "unauthorized user".

palarcon said:
It works with the provited miui flash tool, start to flash bu ask for mi credentials and stop the download for "unauthorized user".
Click to expand...
Click to collapse
Ok, sounds reasonable, at least we'll see. Sorry for the inconvenience to op and everyone. Looks like i better delete my probably misinforming post

i have the same probleme

posted on wrong thread
posted on wrong thread

How come service centre guys unbrick the device. Is there any possibility to modify the miflashtool to bypass edl authentication?

Rishab kaushik said:
How come service centre guys unbrick the device. Is there any possibility to modify the miflashtool to bypass edl authentication?
Click to expand...
Click to collapse
They replace the motherboard. All people that i know of who have visited service center got their motherboard replaced
Sent from my Redmi Note 5 Pro using Tapatalk

LOL, so stupid of Xiaomi to implement ARB protection this way (btw, NOT like google intended to use it...)... hope that they will have to pay for/replace thousands of motherboards so they will notice how badly they screwed up... it´s just ridiculous..

EEA Rom flash stuck

Hi all,
Recently I did the following:
1 - unlock device
2 - flash rom (clean all and lock)
3 - erro message appears "This MIUI version can't be installed on this device"
I am stuck
I can repeat the process, to unlock device I have to go to MIUI settings and to do that I need a rom.
Miui pc suite doesn't detect the device no matter what.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

flash rom (clean all and lock) is wrong. You should not choose this option as it will brick your phone.
Try to use MiFlash to flash a fastboot rom and see if it helps.

HKShooter said:
flash rom (clean all and lock) is wrong. You should not choose this option as it will brick your phone.
Try to use MiFlash to flash a fastboot rom and see if it helps.
Click to expand...
Click to collapse
I know, but I miss that point and I recognized the mistake late after.
I try what you said with different roms (EEA, GLOBAL and Chinese) I doesn't start the flash process due to an error. The error is because the phone is locked and is not possible to rewrite.

Try this to see if it works for you
http://c.mi.com/thread-238808-1-0.html

Or try that like in the video: https://www.youtube.com/watch?v=5o2WJZ5nTnY

HKShooter said:
Or try that like in the video:
Click to expand...
Click to collapse
I am not able to flash or do any fastboot commands because the device is locked

Jester646 said:
I am not able to flash or do any fastboot commands because the device is locked
Click to expand...
Click to collapse
MiFlash Tool cannot recognize your phone?

HKShooter said:
MiFlash Tool cannot recognize your phone?
Click to expand...
Click to collapse
MiFlash tool recognize the device but gives me an error "erase boot error" when I try to flash it
Flashing via MiFlash tool I need to unlock bootloader
To unlock bootloader I need to add the miui account in Mi Unlock status under developer options...to do that I need a rom. Rom doesn't work because "can't be installed on this device"

HKShooter said:
Or try that like in the video:
Click to expand...
Click to collapse
EDL method is a great option unfortunately doesn't work on CC9PRO/NOTE10

Jester646 said:
EDL method is a great option unfortunately doesn't work on CC9PRO/NOTE10
Click to expand...
Click to collapse
If it still doesn't work, you need to go to the Xiaomi service center.

Since its locked with no ROM, i dont think i can help you . Last thing i can suggest is using test point method, which means you need to pry open your backglass cover.

HKShooter said:
If it still doesn't work, you need to go to the Xiaomi service center.
Click to expand...
Click to collapse
Xiaomi service center message "I would like to inform you that we won't be able to assist in this regard as your device has been bricked. However, I would request you kindly get in touch with the respective point of purchase." I bought this device during a China trip, I live in Germany.

I am able to use MiFlash PRO and flash the same ROM trough the option Recovery Flash, however, I don't solve the issue.
I am not able to use other rom: "current ROMs network carrier type is different from that in the recovery package."
Any suggestions?

Jester646 said:
I am able to use MiFlash PRO and flash the same ROM trough the option Recovery Flash, however, I don't solve the issue.
I am not able to use other rom: "current ROMs network carrier type is different from that in the recovery package."
Any suggestions?
Click to expand...
Click to collapse
if you really desperate, try the test point method.

Jester646 said:
Xiaomi service center message "I would like to inform you that we won't be able to assist in this regard as your device has been bricked. However, I would request you kindly get in touch with the respective point of purchase." I bought this device during a China trip, I live in Germany.
Click to expand...
Click to collapse
The service center must be able to help. Did you tell them honestly that you flashed the international Rom and bricked it? If you were in China, there should be shops in Shenzhen who can help you.

HKShooter said:
The service center must be able to help. Did you tell them honestly that you flashed the international Rom and bricked it? If you were in China, there should be shops in Shenzhen who can help you.
Click to expand...
Click to collapse
He live in germany. And his phone is china model, thus i doubt the xiaomi representative in germany would like to help. Since its uncovered by eu warranty. I guess he gonna have to spend some amount of money to get it fixed. Or experimenting with test point himself.

otonieru said:
He live in germany. And his phone is china model, thus i doubt the xiaomi representative in germany would like to help. Since its uncovered by eu warranty. I guess he gonna have to spend some amount of money to get it fixed. Or experimenting with test point himself.
Click to expand...
Click to collapse
In Hongkong, the people can take the phone to the service centers in China to repair it. Xiaomi sells international version only in HK. I think there is no need to tell whether it's a China version or EU version as it's bricked and the phone looks the same. Maybe there are some shops in Germany who can help.

otonieru said:
He live in germany. And his phone is china model, thus i doubt the xiaomi representative in germany would like to help. Since its uncovered by eu warranty. I guess he gonna have to spend some amount of money to get it fixed. Or experimenting with test point himself.
Click to expand...
Click to collapse
I ordered a Deep flash cable, that may help, it is expected to be delivered on Saturday. I will share the results after... I didn't find enough information about the testing points to open the device yet.

HKShooter said:
In Hongkong, the people can take the phone to the service centers in China to repair it. Xiaomi sells international version only in HK. I think there is no need to tell whether it's a China version or EU version as it's bricked and the phone looks the same. Maybe there are some shops in Germany who can help.
Click to expand...
Click to collapse
I am sure people more flexible than others but if by email they said no after being honest. There is no point for me to go door by door. In last scenario I may have a business trip to CN after CNY, if yes, I take the phone with me and I am sure that in there I solve it (from past experience).

Jester646 said:
I ordered a Deep flash cable, that may help, it is expected to be delivered on Saturday. I will share the results after... I didn't find enough information about the testing points to open the device yet.
Click to expand...
Click to collapse
as far as i know, deep flash cable is no longer working since miui 10. i might be wrong though

Mi Note 10 Pro Hard Brick

(First of all sorry for my English, I'm from Mexico)
Hello Friends, this is my first post, however, I have always used this forum as a guide along the phones I have had.
A few days ago I made a Hard Brick to my Mi Note 10 Pro, this while trying to load the Xiaomi EU Rom. I have seen many tutorials where they indicate how to revive it, without success since most are focused on the phone turning on in Fastboot mode, mine does not turn on in any way
I managed to make the phone recognize the PC in EDL mode but when flashing in Mi Tools it asks for a My account, when entering it the software tells me that my account is not authorized to carry out that transaction.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Someone here managed to solve this or know of some method in which you do not need that authorized account and finally retrieve the phone?
I would greatly appreciate your help

dbaesteban said:
(First of all sorry for my English, I'm from Mexico)
Hello Friends, this is my first post, however, I have always used this forum as a guide along the phones I have had.
A few days ago I made a Hard Brick to my Mi Note 10 Pro, this while trying to load the Xiaomi EU Rom. I have seen many tutorials where they indicate how to revive it, without success since most are focused on the phone turning on in Fastboot mode, mine does not turn on in any way
I managed to make the phone recognize the PC in EDL mode but when flashing in Mi Tools it asks for a My account, when entering it the software tells me that my account is not authorized to carry out that transaction.
​Someone here managed to solve this or know of some method in which you do not need that authorized account and finally retrieve the phone?
I would greatly appreciate your help
Click to expand...
Click to collapse
do fastboot mode work?

albo.ma said:
do fastboot mode work?
Click to expand...
Click to collapse
Fastboot is an Android protocol that allows you to modify the filesystem through a USB connection to the smartphone, however, in my case it does not enter that mode, only EDL

i'm sorry but never happened to me... did u tried mi flash to flash something? does mi flash recognize your mi note 10 in edl mode?

albo.ma said:
i'm sorry but never happened to me... did u tried mi flash to flash something? does mi flash recognize your mi note 10 in edl mode?
Click to expand...
Click to collapse
Yes, I already tried Mi Flash, but it seems that you need an authorized account, here is the image of the software:

You could try QFIL (Qualcomm Flash Image Loader). I personally haven't needed to use it but it's designed to work with all Qualcomm Android devices.
Some info links
https://androidmtk.com/use-qualcomm-flash-image-loader-qfil
https://androidmtk.com/download-qpst-flash-tool
https://www.google.co.nz/url?sa=t&s...jAEegQIDBAO&usg=AOvVaw2g_XEnwfWA5Aj-IyquRhN2p

did a quick research and found these:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
patched version of mi flash to bypass authorization, but for redmi note 5 - check the thread if it works for other models too
https://in.c.mi.com/thread-1571278-1-1.html
people are requesting authorization there, do not know if they ever succeed but maybe it is worth to try

grandma_p said:
did a quick research and found these:
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
patched version of mi flash to bypass authorization, but for redmi note 5 - check the thread if it works for other models too
https://in.c.mi.com/thread-1571278-1-1.html
people are requesting authorization there, do not know if they ever succeed but maybe it is worth to try
Click to expand...
Click to collapse
It seems to work, I have been trying for several hours to find the right .mbl for the MI CC9 Pro without success, I will continue searching and inform you.
Thank you for the support!

It looks like Mi Tools need to bind your computer to your device in order to give you authorization, i think you need to ask for authorization in the Official Xiaomi Support Forums.

tadad1 said:
You could try QFIL (Qualcomm Flash Image Loader). I personally haven't needed to use it but it's designed to work with all Qualcomm Android devices.
Some info links
https://androidmtk.com/use-qualcomm-flash-image-loader-qfil
https://androidmtk.com/download-qpst-flash-tool
https://www.google.co.nz/url?sa=t&s...jAEegQIDBAO&usg=AOvVaw2g_XEnwfWA5Aj-IyquRhN2p
Click to expand...
Click to collapse
Thanks, I'm still looking for the correct files for Mi Note 10 Pro, it seems they are limited

CescVicious said:
It looks like Mi Tools need to bind your computer to your device in order to give you authorization, i think you need to ask for authorization in the Official Xiaomi Support Forums.
Click to expand...
Click to collapse
Thank you !, I already tried and posted to see if they hopefully give me authorization :good:

dbaesteban said:
Thanks, I'm still looking for the correct files for Mi Note 10 Pro, it seems they are limited
Click to expand...
Click to collapse
You need to download a fastboot ROM, I checked and they were all there although in the video there is only one XML file but in the MIUI fastboot ROM there are 5 but I was able to load them into QFIL so I think it would not be a problem.
Have a look here you will find all the tucana ROMs
https://t.me/s/MIUIUpdatesTracker?q=#tucana
The last fastboot ROM was 11.0.9.0. you will need to extract the .tgz file which will give you a .tar file which you need to then extract again to get the files needed.

tadad1 said:
You need to download a fastboot ROM, I checked and they were all there although in the video there is only one XML file but in the MIUI fastboot ROM there are 5 but I was able to load them into QFIL so I think it would not be a problem.
Have a look here you will find all the tucana ROMs
https://t.me/s/MIUIUpdatesTracker?q=#tucana
The last fastboot ROM was 11.0.9.0. you will need to extract the .tgz file which will give you a .tar file which you need to then extract again to get the files needed.
Click to expand...
Click to collapse
Yes, in fact I tried all the xml files and their possible combinations without success.
The file "programmer patch", in this case comes in extension .elf and in the videos that I have seen is extension .mbn, Additional the first xml that is loaded is also called rawprogram.xml in the firmware for my Note 10 there are none file named like that.
I will keep searching and if I find something, I will post it for users who have this problem in the future
this is the error that gives me in all cases

.elf and .mbl are both supported by QFIL so should be fine. I have 6 .XML, rawprogram0.xml to rawprogram5.xml. When I press the load XML button I can click and drag and select them all at once. It then prompts me to load the patch.xml once again patch0.xml to patch5.xml and drag and select all. They should now all appear in the Rawprogram and Patch window. Unfortunately I can't get into EDL mode to try flashing but it looks like you are already in EDL. All the best.

Well, after many days of searching without solution, I decided to take it to the technical service, who flashed it in EDL mode with the UFT box.
The cell phone is walking and without any anomaly.
Thank you all for your valuable help.

dbaesteban said:
Well, after many days of searching without solution, I decided to take it to the technical service, who flashed it in EDL mode with the UFT box.
The cell phone is walking and without any anomaly.
Thank you all for your valuable help.
Click to expand...
Click to collapse
is there any way other than UFT box to unbrick the phone mine have working EDL, fastboot , offical recovery but relock bootloader ..:crying:

I am having the exact issue in attempt to update the rom through fastboot. My tucana is no more responding to charging, pwr + Vol combination, detection to laptop etc. I have tried making my own EDL cable and its working with K20 but not with Tucana. Can you please brief how you managed to get phone into EDL mode?

Question Bricked Redmi Note 11 Pro+ 5G (Unable to unlock or flash)

Hey!
I just bought a Xiaomi Redmi Note 11 Pro+ 5G. As it is a chinese phone, the seller flashed the global ROM himself and sent it to me. It was generally working, except for NFC and the blurry camera. I figured the NFC wasn't working because the device was unlocked before, and so this long journey began. I tried to lock the bootloader again, and the phone shot down immediately, then it started boot looping. All I can get to is the recovery (which displays the "this miui version can't be installed on this device" message) and fastboot pages. I've tried unlocking it again, flashing a clean stock ROM, bypassing the lock, and it all came to nothing.
It seems that MediaTek devices are hard to fiddle with. This phone has a Dimensity 900 (MT6877). I've tried tools like:
Xiaomi Official Unlock Tool (no success) as it won't let me unlock the phone.
Xiaomi Official Flashing Tool (no success) as it won't flash a lock phone.
MTK Flash Tool (no success) as it won't accept my ROM's scatter file. It says the file is invalid.
SP Flash Tool (no success) as it won't accept my ROM's scatter file. It says the version is not supported/the file is invalid.
MTK Client (no success) as I can't make it work at all. Setuptools module is missing for some ****ing reason.
MTK Bypass Utility Master (no success) as the "usb" module is missing. I don't know what to do.
Honestly, this is all my fault. Both for bricking the phone and for doing something wrong while trying the methods above. Please enlighten me. Is there any way to recover this phone? It's OEM Locked. I need a tool that bypasses the mediatek stuff or something (with a detailed guide with ALL needed requirements to install, if possible).

"MTK Bypass Utility Master (no success) as the "usb" module is missing"
try installing some drivers, such as:
-mtk driver
-vcom
-xiaomi usb driver
-libusb-win
and maybe u could study these step from redmi 6A:
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com

Hey there. So...
I'm trying out your guide, but I'm already stuck. Sorry for that. When I try to add the scatter file (from the stock ROM), I keep getting the following error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The same happens with other flash tools. MTK Flash Tool tells me the file is invalid, while SP tells me it's not supported. Any tips?

You should never lock the bootloader on a chinese xiaomi phone with global rom

Howerr said:
Hey there. So...
I'm trying out your guide, but I'm already stuck. Sorry for that. When I try to add the scatter file (from the stock ROM), I keep getting the following error:
View attachment 5772747
The same happens with other flash tools. MTK Flash Tool tells me the file is invalid, while SP tells me it's not supported. Any tips?
Click to expand...
Click to collapse
thats right, check in case your device still locked.
if it does locked, try to unlock it first.
also, you could try using another scatter files (from different spflash or else).

Hi Howerr,
Afaik, our device is definetly a qualcomm device + not an mtk device. try it out, this will help you, or you typed the wrong device model. VEUX has a qualcomm chip.

Hi I have a Redmi Note 11 Pro+ updated to MIUI 13.0.5.0. global. Can I use the Recovery Stock to go back to MIUI 12.0.5.0? thank you

Good evening. Guys could this work to unlock the MEDIA TEK processor?
It's now easy to bypass MediaTek's SP Flash Tool authentication
A group of developers has created a Python utility to bypass the authentication routine of MediaTek SP Flash Tool. Check it out now!
www.xda-developers.com

Tajil said:
"MTK Bypass Utility Master (no success) as the "usb" module is missing"
try installing some drivers, such as:
-mtk driver
-vcom
-xiaomi usb driver
-libusb-win
and maybe u could study these step from redmi 6A:
Fix HardBrick Redmi 6A (no recovery and no fastboot, only black screen)Fix without need Authotization stuff
----------------------------------------------------------------------- Finally I could fix my redmi 6A after suffering hardbrick. I couldnot enter to recovery neither to fastboot mode. My redmi 6A just give me a black screen with vibration on...
forum.xda-developers.com
Click to expand...
Click to collapse
Hello. I have the same PISSARRO Global ROM device. Mediatek. Can I flash with Miflash? Risk of blocking the device? Thank you

Michael P. said:
You should never lock the bootloader on a chinese xiaomi phone with global rom
Click to expand...
Click to collapse
Can you do it the other way around though? Global phone flashing China ROM ? Thank you!

darkguy2008 said:
Can you do it the other way around though? Global phone flashing China ROM ? Thank you!
Click to expand...
Click to collapse
You can flash any rom on global phone, but don't lock the bootloader. Also nfc might not work in China rom.

Michael P. said:
You can flash any rom on global phone, but don't lock the bootloader. Also nfc might not work in China rom.
Click to expand...
Click to collapse
I see, thanks for your answer, so basically there's no way to have the MIUI Dialer on the 12T with Global ROM MIUI 13 right? Only way is to use the China ROM except not blocking the bootloader. What happens if I lock it? Will it get bricked?

darkguy2008 said:
I see, thanks for your answer, so basically there's no way to have the MIUI Dialer on the 12T with Global ROM MIUI 13 right? Only way is to use the China ROM except not blocking the bootloader. What happens if I lock it? Will it get bricked?
Click to expand...
Click to collapse
If you lock bootloader your phone will get bricked. But you can use miui Indonesian version if you want miui dialer. I use miui Indonesian for my redmi note 11 pro 5g without any issue.

apollo_81 said:
Hello. I have the same PISSARRO Global ROM device. Mediatek. Can I flash with Miflash? Risk of blocking the device? Thank you
Click to expand...
Click to collapse
sorry, I am not yet using miflash

Michael P. said:
If you lock bootloader your phone will get bricked. But you can use miui Indonesian version if you want miui dialer. I use miui Indonesian for my redmi note 11 pro 5g without any issue.
Click to expand...
Click to collapse
Hi Michael, I would like to buy a redmi note 11 pro 5g in Europe and then install indonesian firmware. Can I lock the bootloader after firmware upgrade? Can I then use Google Pay and NFC for payments?

Question Bricked after writing wrong boot.img

Phone: Redmi Note 11 Pro (IMEI search shows model number 21091116C sticker that came with phone shows model number 21091116SG not sure if this matters)
I have accidently patched and written the wrong boot.img to my phone after poorly attempting to setup Magisk to get google pay working on this phone
Am now stuck with the phone either booting to recovery window or I Can enter fastboot
Device bootloader is locked and i do not have a Xiaomi account linked to phone, trying to flash what i believe is ROM using MiFlash tools but fails since bootloader is locked, attempted to unlock using mediatek unlocker tools and cant manage to get this to work either
Feels like there's nothing i have not tried at this point have 20 chrome tabs open, downloaded so many different ROMs and followed heaps of different methods without any success
Edit: Account had not been linked to phone yet
Apologies if this is not posted in the correct format/section believe its right from the rules
Any help would be really apprechiated

I would think MiFlash should still work on a locked BL from EDL. What specific error do you get on MIFlash?

@orangekid thanks for the reply
Tested with multiple Global and CN roms "error:FAILED (remote: not allowed in locked state)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Are you in fastboot or EDL?

just reflash the original unpatched boot.img in fastboot.
I have currently the problem that im stuck in poco boot logo, when I flash patched-boot.img. reflashing unpatched boot.img makes it boot again.

orangekid said:
Are you in fastboot or EDL?
Click to expand...
Click to collapse
Fastboot with the orange "FASTBOOT" display

seedlord said:
just reflash the original unpatched boot.img in fastboot.
I have currently the problem that im stuck in poco boot logo, when I flash patched-boot.img. reflashing unpatched boot.img makes it boot again.
Click to expand...
Click to collapse
I tried flashing heaps of different stock ROM boot.img's but must not be able to find the original not sure, believe its a CN phone that had a Global ROM installed when i brought it but could be wrong

Connor.- said:
Fastboot with the orange "FASTBOOT" display
Click to expand...
Click to collapse
Ok you might need to get the phone in EDL mode. If you cannot do it thru fastboot (I think newer phones might not be able to) you might have to remove the back cover and use tweezers to do it thru test point (google or youtube test point EDL for your phone).
Then once in true EDL you can try flashing again with the tool. If you still cannot due to no authorization or locked BL or whatever, you might need to extract the stock image and use a patched firehose file to trick MIFlash tool.
I can try to look but it looks like these guys have a collection as well over here:
[No auth collection] Xiaomi No Auth Firehose Files for Qualcomm based phones.
What is this file? As we all know that Xiaomi has blocked offline flashing with authentication to flash their device. This files will ultimately help you to fix the Mi Account Authorization issue and hence unbrick your Xiaomi device via EDL mode...
forum.xda-developers.com
I know this is a lot but my thing is in the future if you are going to modify your phone like kernel patching or anything of the sort you need to unlock your BL first. Just trying to point you in any direction that can resurrect your device.
Believe me I have been in weird situations, such as last year when I somehow flashed a bad file on my OnePlus 9 and the ONLY solution was to literally flash an Indian OnePlus 9 Pro (different device, different region) ROM on my phone from EDL, so my point is there's almost always something you can do unless you want to say screw it and send it in for repair.
I would remove the back of the phone and leave it off, because whatever you're going to do might require test point EDL until you actually get something to flash and boot. At this point I guess it can't really get any worse.

orangekid said:
Ok you might need to get the phone in EDL mode. If you cannot do it thru fastboot (I think newer phones might not be able to) you might have to remove the back cover and use tweezers to do it thru test point (google or youtube test point EDL for your phone).
Then once in true EDL you can try flashing again with the tool. If you still cannot due to no authorization or locked BL or whatever, you might need to extract the stock image and use a patched firehose file to trick MIFlash tool.
I can try to look but it looks like these guys have a collection as well over here:
[No auth collection] Xiaomi No Auth Firehose Files for Qualcomm based phones.
What is this file? As we all know that Xiaomi has blocked offline flashing with authentication to flash their device. This files will ultimately help you to fix the Mi Account Authorization issue and hence unbrick your Xiaomi device via EDL mode...
forum.xda-developers.com
I know this is a lot but my thing is in the future if you are going to modify your phone like kernel patching or anything of the sort you need to unlock your BL first. Just trying to point you in any direction that can resurrect your device.
Believe me I have been in weird situations, such as last year when I somehow flashed a bad file on my OnePlus 9 and the ONLY solution was to literally flash an Indian OnePlus 9 Pro (different device, different region) ROM on my phone from EDL, so my point is there's almost always something you can do unless you want to say screw it and send it in for repair.
I would remove the back of the phone and leave it off, because whatever you're going to do might require test point EDL until you actually get something to flash and boot. At this point I guess it can't really get any worse.
Click to expand...
Click to collapse
Thanks for this, i believe its a Mediatek processor not qualcomm unfortunately but EDL pins dont look too hard to access was suprised to see how easy it is to remove the glass back. I'm in talk with the store i purchased it from at the moment so will see how this goes before falling back to pulling the phone apart (only recieved it last Friday )
Realistaclly i am happy with MIUI it works fine for me only intention was to bypass safetynet with magisk so i can use it for contact payments everything else I had already setup just how i like it

Also I would try this maybe?
My experience unbricking a Xiaomi Redmi Note 11 Pro 5G (China) - Hovatek Blog
The Xiaomi Redmi Note 11 Pro (China) is an Android 11 device powered by the MediaTek Dimensity 920 chipset. In
www.hovatek.com

Also you can try this:
[No auth collection] Xiaomi No Auth Firehose Files for Qualcomm based phones.
What is this file? As we all know that Xiaomi has blocked offline flashing with authentication to flash their device. This files will ultimately help you to fix the Mi Account Authorization issue and hence unbrick your Xiaomi device via EDL mode...
forum.xda-developers.com

Tou should never try to flash anything on a phone with lovked bootloader. Even if you had patched the correct boot.img you would have ended with a brick because your bootloader is locked.

Michael P. said:
Tou should never try to flash anything on a phone with lovked bootloader. Even if you had patched the correct boot.img you would have ended with a brick because your bootloader is locked.
Click to expand...
Click to collapse
well it wasnt locked when i first tried