Hello everyone, currently after my bad decision to flash keymaster file form Note 7, my Note 7 Pro is dead and don't have heart beat.
After a while I see only EDL working via testpoint on back cover. Now am stuck between two option to pay 30$ for auth. account or find emmc file.
I know nothing is free but i will try to find emmc firehose mbn file. If anyone have idea where can find be kind to share with me. Thanks in advance!
I think the name of the file will be prog_emmc_firehose_Sdm675_ddr.mbn or prog_emmc_firehose_Sdm6150_ddr.mbn
b0nb0n3v said:
Hello everyone, currently after my bad desiciot to flash keymaster file form Note 7, my Note 7 Pro is dead and don't have heart beat.
After a while I see only EDL woriking via testping on backcover. Now am stuck between two option to pay 30$ for auth. account or find emmc file.
I know nothing is free but i will try to find emmc firehose mbn file. If anyone have idea where can find be kind to share with me. Thanks in advance!
I think the name of the file will be prog_emmc_firehose_Sdm675_ddr.mbn or prog_emmc_firehose_Sdm6150_ddr.mbn
Click to expand...
Click to collapse
It will available in fastboot rom right ? ?
urstrulynaveen said:
It will available in fastboot rom right ? ?
Click to expand...
Click to collapse
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
b0nb0n3v said:
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
Click to expand...
Click to collapse
This happend to me also i searched whole internet but sadly their is no firehose file for our violet available to bypass edl auth. I suggest the best way to reach nearest service center they flash it with mi flash via testpoints and its cheap not so coastly. Dont try to flash by your side alone u may trash ur partition tables situations may get worse.
Same here I don’t have any hope for this trash. Never gonna by a Xiaomi again. I remember in old redmi phones you didn’t need auth to flash edl
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
There was a Russian selling me auth account for 10$ but I bet he’s gonna scam so I didn’t try.
Anyway. Let me know if you find the firehose file or anything.
DeveloperOne said:
Same here I don’t have any hope for this trash. Never gonna by a Xiaomi again. I remember in old redmi phones you didn’t need auth to flash edl
---------- Post added at 09:20 AM ---------- Previous post was at 09:19 AM ----------
There was a Russian selling me auth account for 10$ but I bet he’s gonna scam so I didn’t try.
Anyway. Let me know if you find the firehose file or anything.
Click to expand...
Click to collapse
Yes they are scamers and they use TeamViewer which may lead to hack your computer. So better is to rush on service center. Those good old days of redmi phones will never come back they are imposing more and more restrictions to devices.
my violet is dead !
my phones is also dead ....was trying to get back to miui 11 (android 9)from covrvus 6.5(android 10) because no sensors were working in corvus !
i got miui 11 but wifi was not working and sensors too ! tried flaashing many fastboot roms from offical miui sites but non of them fixed senors and wifi ! ...then tried flashing with old miflashtool probably 2014 version ... then flash system error came while flashing fastboot rom violet ....
then phone got switched off automaticaly ! and never started since then !
i looked up everything flashing with edl mode !
in miflashtool
earlier when bootloader it was showing "ceeee0ccc0" device name
now in miflashtool it is showing "COM20" or"COM10"
when i am flashing fastboot rom latest one with latest flashtool
it is showing "packet receive something something..." call paket ...etc
some time it shows "edl auth " then it ask to sign in my account after login ..
"Your Acount is bined to this system " but later ""Your account is not authorised for this operation !"
and hence the flashing stops with error !
if someone is seriously readying this you can reply and ask for screenshots
please ! i have lost all hopes ! i need some guidence and lil help !
I looked a way to bypass edl auth ...
but the video was of Redmi note 7 ! not pro
in there he used
some file "prog_emmc_firehose_Sdm610_ddr.mbn" somehing like that ...
he placed this file in images folder !
it skipped the edl auth ...and flashing continued !
maybe if i can get file
prog_emmc_firehose_Sdm675_ddr.mbn something like that of my phone
violet version for my chipset
maybe i can skip too auth edl ....
dont know ! just help please !
kankurcool said:
my phones is also dead ....was trying to get back to miui 11 (android 9)from covrvus 6.5(android 10) because no sensors were working in corvus !
i got miui 11 but wifi was not working and sensors too ! tried flaashing many fastboot roms from offical miui sites but non of them fixed senors and wifi ! ...then tried flashing with old miflashtool probably 2014 version ... then flash system error came while flashing fastboot rom violet ....
then phone got switched off automaticaly ! and never started since then !
i looked up everything flashing with edl mode !
in miflashtool
earlier when bootloader it was showing "ceeee0ccc0" device name
now in miflashtool it is showing "COM20" or"COM10"
when i am flashing fastboot rom latest one with latest flashtool
it is showing "packet receive something something..." call paket ...etc
some time it shows "edl auth " then it ask to sign in my account after login ..
"Your Acount is bined to this system " but later ""Your account is not authorised for this operation !"
and hence the flashing stops with error !
if someone is seriously readying this you can reply and ask for screenshots
please ! i have lost all hopes ! i need some guidence and lil help !
I looked a way to bypass edl auth ...
but the video was of Redmi note 7 ! not pro
in there he used
some file "prog_emmc_firehose_Sdm610_ddr.mbn" somehing like that ...
he placed this file in images folder !
it skipped the edl auth ...and flashing continued !
maybe if i can get file
prog_emmc_firehose_Sdm675_ddr.mbn something like that of my phone
violet version for my chipset
maybe i can skip too auth edl ....
dont know ! just help please !
Click to expand...
Click to collapse
Bro sadly there is no firehose file for violet. I had same issue earlier only solution is to go service center. They flash in edl takes just 10 mins charge around 180 rupees. U may try flashing via umt dongle or miracle thunder but i never recommendes that.
My RN7pro got also dead, I had to pay 1200rs to revive this phone by local mobile repairer. They flash it with UFI box. I made mistake no to go authorised service center. That technician looted me.
b0nb0n3v said:
No, no light, no vibration - nothing. Only EDL via testpins work, but need auth. account for flash. I think have another way to revive. I will wait some guru to see this thread.
I don't know did available to switch from EDL to fastboot?
Click to expand...
Click to collapse
hey dude can u pls help me? im on the same boat which u were on. i dont find that patched up emmc file of note 7 pro. flashing with the stock rom showing error in quolcomn softwares as well in mi flasher tool. pls help what to do now
Related
Hello All,
I've found a solution for unbrick Redmi Note 5 Pro caused by AntiRoll Back..
Things You Needed !!
1. Open browser and login to the MIUI Forum. Post MI ID there cuz Authorized Mi ID Needed for Flashing. (Use Google Transtlate)
http://en.miui.com/a-234.html
3.Qualcomm HS-USB QDLoader 9008 ( If Already Installed Don't Mind) ...> https://goo.gl/9E3bKq
4. Use This MiFlash Tool ...> http://https://c.mi.com/forum.php?mod=attachment&aid=MjY3MDA2N3xiNDQzMzE2YXwxNTMxNTM2NjQ1fDB8MTIyMDk4OQ%3D%3D
5.Mind..:laugh:
Step 1 :-
Download latest MIUI 10 Fastboot ROM And Extract It. tgz to zip.
Step 2 :-
Download and install Qualcomm Hs-USB QDLoader 9008 Drivers
Step 3 :-
Connect your device to your PC via TestPoint If You don't know
check this thread http://en.miui.com/thread-2171064-1-1.html:good:
Step 4:-
Download and extract MiFlash Tool v2018.5.28.0
Open MiFlash Tool
Browse ROM Folder - OK
Start Flash..:good:
Ster 5 :-
Login to Your Mi Account which is binded with the device. Otherwise couldn't flash your device !
After Login Flash Without Any ERRORS !
--- HAPPY FLASHING --
Don't Say Thanks.. Hit THANKS Button for Supporting Me:laugh::laugh:
did you succeed?
ling mi flash eror
Dimas Aji Prasetyo said:
ling mi flash eror
Click to expand...
Click to collapse
_en.miui.com/forum.php?mod=viewthread&tid=3014918&highlight=MiFlash%2BTool%2Bv2018.5.28.0
Test Point method Voids Warranty AFAIK
So, try only if you don't have access to any Xiaomi Service Center
Official Service Centers unbrick your phones for free within warranty
Instead of this try n see if Deep Flash Cable method works
Redmi note 5 whyred rollback
unauthorized xiaomi acount, wwhy?
Dimas Aji Prasetyo said:
unauthorized xiaomi acount, wwhy?
Click to expand...
Click to collapse
You need to get authorization by applying in the MIUI forum. You can get the link in the other thread.
Bricked
This solution not work for me! My devices was bricked but PC still recognize EDL 9008 Com port. When press flash, Miflash said: "cannot receive hello packet"
Check this thread
http://en.miui.com/thread-2171064-1-1.html
it hasn't worked for anyone i know so far. waiting fro PM or notifictaion from russian forum. will try again. maybe then will send notification when they add th account
UID Authorization
Why do you have permissions to give authorization to the users ID? Youre going to give the instructions to each repply to your post or youre going to wait until July 16?
Thanks for your work, im very depressed because i bricked a brand new phone and i selled the old .
[QUOTE="palarcon, post: 77074185, member: 6643300"]Why do you have permissions to give authorization to the use
uid or mi id?
deleted
Maxxash said:
The instruction provided in the post is useless for the devices bricked with the latest ARB implementation by Xiaomi since these devices would not send a hello packet in EDL mode. The op just reposted the info from the old miui.com thread that has nothing to do with the current situation.
Click to expand...
Click to collapse
It works with the provited miui flash tool, start to flash bu ask for mi credentials and stop the download for "unauthorized user".
palarcon said:
It works with the provited miui flash tool, start to flash bu ask for mi credentials and stop the download for "unauthorized user".
Click to expand...
Click to collapse
Ok, sounds reasonable, at least we'll see. Sorry for the inconvenience to op and everyone. Looks like i better delete my probably misinforming post
i have the same probleme
posted on wrong thread
posted on wrong thread
How come service centre guys unbrick the device. Is there any possibility to modify the miflashtool to bypass edl authentication?
Rishab kaushik said:
How come service centre guys unbrick the device. Is there any possibility to modify the miflashtool to bypass edl authentication?
Click to expand...
Click to collapse
They replace the motherboard. All people that i know of who have visited service center got their motherboard replaced
Sent from my Redmi Note 5 Pro using Tapatalk
LOL, so stupid of Xiaomi to implement ARB protection this way (btw, NOT like google intended to use it...)... hope that they will have to pay for/replace thousands of motherboards so they will notice how badly they screwed up... it´s just ridiculous..
Hi, guys. I have a terrible issue with my phone. I tried to flash stock ROM and phone get bricked. After that, i used a tool to flash without MiFlash but i miss the tool is for Redmi 3S, so i guess i mess up, HardBrick. The thing is that my phone is stuck in EDL mode, if i connect to laptop, that recognize QD Loader 9008 port. But if i flash again, i getting the error "writing exceeded wait time" and in times "only nop and sig tag...."
Any advices folks??
Edit: I used newest MiFlash and all good untill i get "No authorized Xiaomi Account can't Flash" message... Help please
Miflash Beta 2016: "cannot find port"
Miflash 2015: "catastrophic failure 0x8000ffff "
Can you boot into recovery?
THE USER said:
Can you boot into recovery?
Click to expand...
Click to collapse
Im stuck in EDL, i dont tried point test yet because dont want to loose warranty. None of the button combinations can send my out of EDL
kathsfernan said:
Im stuck in EDL, i dont tried point test yet because dont want to loose warranty. None of the button combinations can send my out of EDL
Click to expand...
Click to collapse
Did you solve it?
I have the same problem
venezolano69 said:
Did you solve it?
I have the same problem
Click to expand...
Click to collapse
Dont worked any of the advices. The only method i have seen is to pay a s- unlock account (20-30 $) but i certainly need a china rom, and dont exist any for the RN 6 Pro, so i guess i have a paperweight instead :crying:
Hi guys, i need to tell you that i could flash via MiFlash with succeed. The problem i have right now that the phone is in Bootloop, even if i Flash again with newest MiFlash version. I have to say that im unlocked bootloader, what you recomend?
Had the same issue. Went to the service center and they flashed it and gave it back within 15 mins
As i have read in the article from the link below, even for EDL you have to have account approval from Xiaomy (which is paid i assume)...
https://www.xda-developers.com/xiaomi-anti-rollback-protection-brick-phone/
Sent from my Redmi Note 6 Pro using Tapatalk
Well.... after thousand of tries, i could bring back to life my device, only flashing Beta Pie Official rom via MiFlash 2018528. Only thing is that i missed IMEI
I have also watched before (maybe a year ago) some clips on YouTube how to bring back IMEI number (procedure for entering number, you have it on the box of the phone if you still have it).
Hope you will resolve it soon.
I will download MiFlash 2018528 and try to flash MIUI 9 to mine phone... I have read that MIUI 9.6.10.0 have ARB level 4, same as MIUI 10.2.2.0 so it should be safe to flash back to MIUI 9 (really hope it is safe [emoji53])
Sent from my Redmi Note 6 Pro using Tapatalk
Well...i was.flashing 9.6.10.0 through MinFlash tool, and after some 130 seconds, some error has been reported (Failed to write - somerhing like that) and I'm stuck on Fastboot... Same thing is happening when i want to flash 10.0.5.0 or even 10.2.2.0 which was there in the first place...
Since it's stuck in Fastboot, i hope i didn't brick it... I have sent it to a guy which is an expert in these things, hoping to resolve ot successfully [emoji53]
Sent from my Redmi Note 4 using Tapatalk
davorterzin said:
Well...i was.flashing 9.6.10.0 through MinFlash tool, and after some 130 seconds, some error has been reported (Failed to write - somerhing like that) and I'm stuck on Fastboot... Same thing is happening when i want to flash 10.0.5.0 or even 10.2.2.0 which was there in the first place...
Since it's stuck in Fastboot, i hope i didn't brick it... I have sent it to a guy which is an expert in these things, hoping to resolve ot successfully [emoji53]
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
You could flash back Beta Pie from newest fastboot without any problem
My problem right now is that i restore IMEI, but no signal for me. None of the sim card, even if the phone recognize that
How did u get the authorized ID?
could someone solve it?
My phone:
+) Wipe system+data = (No system)
+) recoverry OrangeFox-Unofficial-RMX2030.img error, and i delete it = (No recovery)
+) and OEM is lock = (can't use adb or fastboot)
I am trying to find a tool, a firmware for my phone. :fingers-crossed:
I have found quite a lot of firmware, it msmdownload tools+file.ofp and I cannot use it without an ID(user) and password
Someone help me, with another tool, or a .ofp file can use the oppo download tools to flash it. :highfive:
(I am using Google Translate. I apologize for the inconvenience.)
nguyenvanbongmac said:
My phone:
+) Wipe system+data = (No system)
+) recoverry OrangeFox-Unofficial-RMX2030.img error, and i delete it = (No recovery)
+) and OEM is lock = (can't use adb or fastboot)
I am trying to find a tool, a firmware for my phone. :fingers-crossed:
I have found quite a lot of firmware, it msmdownload tools+file.ofp and I cannot use it without an ID(user) and password
Someone help me, with another tool, or a .ofp file can use the oppo download tools to flash it. :highfive:
(I am using Google Translate. I apologize for the inconvenience.)
Click to expand...
Click to collapse
no support brother... sorry my phone is realme 5i same problem soft bricked no recovery bo boot ... only work fastboot mode and locked ... fastboot flashing unlock command not working .....
tool and ofp
ekrem336 said:
no support brother... sorry my phone is realme 5i same problem soft bricked no recovery bo boot ... only work fastboot mode and locked ... fastboot flashing unlock command not working .....
Click to expand...
Click to collapse
sorry bro I can't send a link because I'm a new user I'll send the link If I'm available
CjConvento said:
sorry bro I can't send a link because I'm a new user I'll send the link If I'm available
Click to expand...
Click to collapse
Can you send it personally ?, from telegram or anything because my phone is also having the same problem
is there any update here? i encounter same problem.
The easiest way is to head towards the service center, they flash the original ROM for Indian Rupees 180 ($2 approx). Realme download tool needs username & password which is not available anywhere on the internet...
You can ask for flash your online, there are many different online services available to flash realme phones. They are remotely connect to your pc via tv (team viewer) and they log in with there user name & password and flash your phone. They charge you around 150 Indian rupees, not give more money than 200 Indian rupees.
Note: It is important to first gain full information about the person who going to flash your phone online and they also ask you to pay first.
Sorry for bad english, thanks!
Hi, Guys
I got a Xiaomi Mi 10 LITE YOUTH EDITION better known as the ZOOM EDITION in China, The reseller flash a EEA Global ROM on it but the camera on this version does not seem to work properly due to the fact that it's got a 50x zoom lens, so I wanted to flash the original CHINA ROM that came with the device! So by mistake I flashed and locked the bootloader at the same time! The image did not take and the bootloader is locked, only to get a message This MIUI version is not compatible on this device! Weird because it is a CHINESE ROM that needs to be on the device!
Long story short I am stuck in Mi recovery Mode and can only use Fastboot as well! When I try to unlock the bootloader it says please switch on device and go to developer settings and select Unlock status. (Which I cannot do now)
Is there anyway to unlock my bootloader besides opening the deivce or paying some random person to access my computer and hopefully fix it!
Am I screwed now?
Some help would be appreciated
Thanks in advance
you can try Xiaomitool v2 and choose the 2nd option : my device is bricked, i want to unbrick it.
Hello
You have to use the "miflash" software and flash the original rom I give you the link (https://bigota.d.miui.com/V12.0.3.0...VCNXM_20200620.0000.00_10.0_cn_cd89596665.tgz) you have to download it, decompress it and then put it in the software, put your phone in fastboot mode and click on " flash" sometimes it's long, you have to let the phone turn on again, and then you can unlock your bootloader Good luck
Hi, Im interested in purchasing this Zoom/Youth versión, where did you take It, please?
iatkos78 said:
Hello
You have to use the "miflash" software and flash the original rom I give you the link (https://bigota.d.miui.com/V12.0.3.0...CNXM_20200620.0000.00_10.0_cn_cd89596665.tgz) you have to download it, decompress it and then put it in the software, put your phone in fastboot mode and click on " flash" sometimes it's long, you have to let the phone turn on again, and then you can unlock your bootloader Good luck
Click to expand...
Click to collapse
https://www.kimovil.com/es/donde-comprar-xiaomi-mi-10-youth-edition
Yes but the bootloader is locked so I cannot install software! I was told to open the phone and do test point install
Test points on the xiaomi mi 10 lite
Does anyone know where to locate the test points inside the Xiaomi Mi 10 Lite? I honestly not sure how to do this!!
loverboy1978 said:
Yes but the bootloader is locked so I cannot install software! I was told to open the phone and do test point install
Click to expand...
Click to collapse
If reseller flashed your device before it means your device was unlocked. I bought my device from eBay. It was unlocked and it was advertised like Chinese version of Global ROM , camera was not working properly as your one. So I used my computer to install Android adb,TWRP and I flashed my phone with TWRP recovery from the xiaomi.eu site. Your device name is vangogh. Good luck.
---------- Post added at 08:24 AM ---------- Previous post was at 08:13 AM ----------
loverboy1978 said:
Yes but the bootloader is locked so I cannot install software! I was told to open the phone and do test point install
Click to expand...
Click to collapse
Try to use Miflash tool and find Chinese original ROM for your device (Mi 10 lire Youth Edition - vangogh is a code name) flash it in Fastboot mode, then unlock it (you have to sign up for Xiaomi account to do this) it might take some time. After that you can try to flash it via TWRP
---------- Post added at 08:27 AM ---------- Previous post was at 08:24 AM ----------
Meichen tt said:
Hi, Im interested in purchasing this Zoom/Youth versión, where did you take It, please?
Click to expand...
Click to collapse
eBay delivery from Hong Kong takes to UK 2 weeks
Hi all,
I need a N976V U7 (USB only) DEAD-BOOT file / DEAD-FIX file / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer
The SM-N976V is a Verizon variant of the Note 10+ 5G positioned for the US market.
PLEASE PLEASE PLEASE !!!
Thank you.
Network_Pro said:
Hi all,
I need a N976V U7 (USB only) DEAD-BOOT file / DEAD-FIX file / DEBUG EMERGENCY / 9008 / UnBrick / firehose programmer
The SM-N976V is a Verizon variant of the Note 10+ 5G positioned for the US market.
PLEASE PLEASE PLEASE !!!
Thank you.
Click to expand...
Click to collapse
you dont need that as far as you can get into EDL mode you can flash with miracle tool box
So the Miracle Tool support SM-N976V SW Rev . bit7 (U7) ? I didn't find it specifically mentioned anywhere. In the EDL mode the Qualcomm sm8150 requires the firehose programmer. For other models this file seems to available so there is hope that for this model it can also be obtained from GSPN USA probably or from a guy who knows a guy who knows a guy who passed by a Samsung building once wink wink.
Network_Pro said:
So the Miracle Tool support SM-N976V SW Rev . bit7 (U7) ? I didn't find it specifically mentioned anywhere. In the EDL mode the Qualcomm sm8150 requires the firehose programmer. For other models this file seems to available so there is hope that for this model it can also be obtained from GSPN USA probably or from a guy who knows a guy who knows a guy who passed by a Samsung building once wink wink.
Click to expand...
Click to collapse
am telling you from experience it happened to my device i bricked it and i used miracle tool crack with just stock rom i did the EDL i just selected scatter file etc and i flashed and that was it
Anyways Good luck unbricking
Which update was it? I think the problem is the bit7 / U7 the firehose for that is another one if it worked for previous versions.
Gudaji said:
am telling you from experience it happened to my device i bricked it and i used miracle tool crack with just stock rom i did the EDL i just selected scatter file etc and i flashed and that was it
Anyways Good luck unbricking
Click to expand...
Click to collapse
Gudaji please give more info how did you do it exactly? Which 'scatter' file did you write to the device ?
Network_Pro said:
Gudaji please give more info how did you do it exactly? Which 'scatter' file did you write to the device ?
Click to expand...
Click to collapse
Okay,
I unpacked the firmware got the scatter file put the device in edl mode (with pins) and flashed the device .
But make sure you watch legit tutorials on YouTube how to get miracle tool box crack
Gudaji said:
Okay,
I unpacked the firmware got the scatter file put the device in edl mode (with pins) and flashed the device .
But make sure you watch legit tutorials on YouTube how to get miracle tool box crack
Click to expand...
Click to collapse
I've deleted your other post in this thread for the same reasons I already provided you here:
[RELEASED] TWRP FOR REDMI 12C/Poco C55
So I've started development for device trees, TWRP and custom for Redmi 12C (earth) and by the end of may we should also have a rom and custom recovery for our Redmi 12C. So stay tuned
forum.xda-developers.com
Please read my message as a friendly warning!
Regards
Oswald Boelcke
Senior Moderator
Which firmware and which scatter file? It won't work with wrong ones. More specifics please.
Did you have a pre-made scatter file, that you have made before bricking/EDL ?
It is important to be precise.
Network_Pro said:
Which firmware and which scatter file? It won't work with wrong ones. More specifics please.
Did you have a pre-made scatter file, that you have made before bricking/EDL ?
It is important to be precise.
Click to expand...
Click to collapse
Your stock rom it is in your stock rom just unpack it or use ODIN to unbrick
Odin does not see the phone because the phone is in 9008 EDL mode and the driver for that one is from Qualcomm. Odin wants a mode and driver from Samsung. For the Samsung download - Odin mode to work, the later Boot stages need to load. Those are messed up by wrong etoken bypass for the wrong Update version or wrong BL or tripepd knox erasure of the entire flash or something of that sort.
In the stock ROM I do not know which file you can call a scatterfile? Is it the PIT file which is used for formatting?
This is the 'stock ROM' correct ? https://samfw.com/firmware/SM-N976V/VZW/N976VVRU7HWB2
Well for sure the Miracle Box has a huge collection of loaders in the distribution, as well as XML files. Very interesting.
@Gudaji, it seems, however that with U7 there may be needed a new loader. The update "bit" is somehow set inside the CPU, which, from my understanding, prevents older loaders from working?
Network_Pro said:
Well for sure the Miracle Box has a huge collection of loaders in the distribution, as well as XML files. Very interesting.
@Gudaji, it seems, however that with U7 there may be needed a new loader. The update "bit" is somehow set inside the CPU, which, from my understanding, prevents older loaders from
Click to expand...
Click to collapse
First of all do you have miracle tool box?
If so go to the Qualcomm tab and you will se flash tab under and then you select the files from your “extracted” firmware and flash while in EDL mode
The "Miracle Box Update 3.39 to 3.40 only for PS" informs me there is a new version and does not start. Maybe I do not have the right one.
Network_Pro said:
The "Miracle Box Update 3.39 to 3.40 only for PS" informs me there is a new version and does not start. Maybe I do not have the right one.
Click to expand...
Click to collapse
There is a bypass for it but you have to look for it
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Network_Pro said:
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Click to expand...
Click to collapse
Reply in my pm asap
Network_Pro said:
I am not finding it yet give me more clues on PM please.
If someone can share a working Miracle tool or sell me a license please PM me.
Click to expand...
Click to collapse
First off how did you brick your device
Spammed the download mode with some wrong files. older etoken bypass, vbmeta disabled, KG disabled , eng. files, modem from other model, boot from other model, twrp recovery not sure which exactly was a successful flash and which were rejected due to checksum mismatch.
Network_Pro said:
Spammed the download mode with some wrong files. older etoken bypass, vbmeta disabled, KG disabled , eng. files, modem from other model, boot from other model, twrp recovery not sure which exactly was a successful flash and which were rejected due to checksum mismatch.
Click to expand...
Click to collapse
hayahe sorry your mobile is dead kek
MIRACLE TOOLBOX IS YOUR 1 AND ONLY SOLUTION IF YOU DONT WANT TO PAY ANYONE IVE GIVEN YOU GUIDE IN YOUR PM SO GOODLUCK KEK