Is there any possibility to use bluetooth clips (Motorola S605, SE MW600, Nokia AD-57 etc.) as mic for answering calls and controlling player (play, pause, next, previous) and using wired headphones connected DIRECTLY to mobile phone in order to use high quality 3.5mm headphones instead of listening through them over bluetooth and having this ****ty sound? Thanks in advance.
Yes, for bluetooth for sure.
Well just to be sure - I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
Could anyone confirm my last post? Thanks.
Bump any answer?
Just tried, no go sorry.
If you could find an AVRCP profile device without A2DP or mono-bluetooth output it might work, but I don't expect any exist.
Are there any good in-ear headphones with working previous/next buttons to control next/previous track and volume in any music player?
Hi well I've been using the Altec Lansing BackBeat 903 Bluetooth Headset for about 3 months now and that has all the features your looking for plus they sound damn good as well.
I use the stock headphones with winamp, and double tap the pause button and it skips to the next track
But for a real solution with back.. you could get one of the little reciever thingies with a 3.5 jack, so you get wireless + controls + any headphone you like ^_^. But there could be some quality loss if its cheap..
Motorola's s9-HD also have theses foncions enabled.
Thanks for the replies. Those two seem to be ear-hugging types, are there any with regular design?
the best would be to use the Nokia remotes that came with the n95 and others. But apparently it doesn't work since the layout inside the jack are not the same between Samsung and Nokia... too bad
I have a question about this topic, I tried to use the apple in-ear headphones with the mic and the volume buttons on my SGS but when i fully plug it into the jack, theres no sound.... but if i leave it out abit then it works fine.... Do u guys know what is going on?
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
PhoenixFx said:
But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
Could you please tell me is this possible with bluetooth clips:
I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
baribalbear said:
Could you please tell me is this possible with bluetooth clips:
Click to expand...
Click to collapse
I don't think it works like that, but I have to check to confirm.
baribalbear said:
pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons.
Click to expand...
Click to collapse
When you are not using BT audio, I doubt the player will respond to BT player controls.
baribalbear said:
After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic.
Click to expand...
Click to collapse
I dont think you can split the mic and headset function like that, either you use the BT for both mic and headphone or not at all. (unless someone modifies the driver). But again, something I have to check to confirm.
For basic call and volume controls something like this might work.
Here is another alternative, but no mic (not released yet either).
PhoenixFx said:
Here is what I use (Motorola S605):
Click to expand...
Click to collapse
Very helpful, purchasing from ebay as we speak, im sick of not being able to switch song whilst cycling...
Just a question really, do you just use the standard samsung music player?
PhoenixFx said:
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
I like these, thanks.
How does this things work? Do you plug anything to the usb port or do you just enable blutooth and play? Also can you use previous/next buttons while the screen is locked? Can you do these with the default player or do you need anything like WidgetLocker and add the player to the lock screen?
Also are there any wired versions of these?
Can I play music on my Zune through my Bluetooth?? Anybody got a clue thanks
Zune hardware devices don't have BlueTooth radios, so no. I assume you mean playing music stored on your Windows phone.
You'll need to be more specific than "my Bluetooth" as there are many, many Bluetooth devices, and most of them only support a few profiles. For example, Bluetooth headsets and Bluetooth-enabled cars will usually support the Headset profile, which WP7 will use for calls and voice commands/text dictation, but will not use for music playback. If that's what you have, then no.
However, there are also Bluetooth headphones, speaker docks, and some cars that have support for a Bluetooth Audio profile (properly, A2DP), which Windows Phone 7 can use to stream music playback.
yes you can.
Hello,
I'm wondering if it is somehow possible to make Oneplus to play media to one device and use media buttons from other Bluetooth media device ?
In my case i have music receiver in my car (tp-link HA100 with no media buttons) which is hooked up to my car's aux input, and I have FM modulator (with media buttons). I want to use that FM modulator buttons to control music while it is playing to tp-link receiver. Buttons work when media output is going though modulator, but not when i switch audio media output to tp-link.
Can anybody help me to find solution ?
I recently installed an after market AndroidAuto unit in my car, it is only available as a wired connection, which is fine. When I plug my device, the sound is routed through the USB (and from there to the unit's AUX interface) which sounds crappy.
My car's bluetooth stereo sounds much much better.
According to Google's site and some other sources, it is not possible to re-route the audio through Bluetooth.
Is there some kind of mod or an application (combined with root) that can actually work around this limitation?