Headphones with working previous/next/volume buttons - Galaxy S I9000 Accessories
Are there any good in-ear headphones with working previous/next buttons to control next/previous track and volume in any music player?
Hi well I've been using the Altec Lansing BackBeat 903 Bluetooth Headset for about 3 months now and that has all the features your looking for plus they sound damn good as well.
I use the stock headphones with winamp, and double tap the pause button and it skips to the next track
But for a real solution with back.. you could get one of the little reciever thingies with a 3.5 jack, so you get wireless + controls + any headphone you like ^_^. But there could be some quality loss if its cheap..
Motorola's s9-HD also have theses foncions enabled.
Thanks for the replies. Those two seem to be ear-hugging types, are there any with regular design?
the best would be to use the Nokia remotes that came with the n95 and others. But apparently it doesn't work since the layout inside the jack are not the same between Samsung and Nokia... too bad
I have a question about this topic, I tried to use the apple in-ear headphones with the mic and the volume buttons on my SGS but when i fully plug it into the jack, theres no sound.... but if i leave it out abit then it works fine.... Do u guys know what is going on?
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
PhoenixFx said:
But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
Could you please tell me is this possible with bluetooth clips:
I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
baribalbear said:
Could you please tell me is this possible with bluetooth clips:
Click to expand...
Click to collapse
I don't think it works like that, but I have to check to confirm.
baribalbear said:
pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons.
Click to expand...
Click to collapse
When you are not using BT audio, I doubt the player will respond to BT player controls.
baribalbear said:
After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic.
Click to expand...
Click to collapse
I dont think you can split the mic and headset function like that, either you use the BT for both mic and headphone or not at all. (unless someone modifies the driver). But again, something I have to check to confirm.
For basic call and volume controls something like this might work.
Here is another alternative, but no mic (not released yet either).
PhoenixFx said:
Here is what I use (Motorola S605):
Click to expand...
Click to collapse
Very helpful, purchasing from ebay as we speak, im sick of not being able to switch song whilst cycling...
Just a question really, do you just use the standard samsung music player?
PhoenixFx said:
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
I like these, thanks.
How does this things work? Do you plug anything to the usb port or do you just enable blutooth and play? Also can you use previous/next buttons while the screen is locked? Can you do these with the default player or do you need anything like WidgetLocker and add the player to the lock screen?
Also are there any wired versions of these?
Related
Bluetooth headset.
What bluetooth headsets will work with the touch diamond?
other question: why should there be any headsets not working? i have a really cheap but nice looking samsung headset, no problem to get paired with the diamond. should work with any other headset, too!?
My existing is just a cheap iTouch bluetooth headset and it works perfectly. I don't think Diamond has any problem to work with other brands.
I have an old Motorola Bluetooth headset (4 Years) and it will not pair with my Diamond. Looks like its time to upgrade to a Jawbone!! hehehe
i have the jabra bt3030 its a stereo bluetooth headset working on A2DP works great and looks awesome!!
So can I listen to music through any bluetooth headset (that has headsets to play music)?
My Plantronics P590 works like a charm
DiamondMflexx said: i have the jabra bt3030 its a stereo bluetooth headset working on A2DP works great and looks awesome!! Click to expand... Click to collapse Say something about the sound, it is better (or/and louder) then original HS or same quality?
Here you go! dave94o said: So can I listen to music through any bluetooth headset (that has headsets to play music)? Click to expand... Click to collapse Theres a app called btAudio (keep a google-eye open for newer versions) that does exactly this, it will send ALL sound to the headset, despite of what windows had in mind for the sound (as in if it was gonna use headset or build-in speaker) Tho, it sometimes chokes when you dont shut down the app before you disable the bluetooth headset or phones bluetooth function, but i guess that kinda makes sense (its even sayd in the program to not do that, but im a sucker for trying such things hehe) And another thing, this happend for me too (taken from comments on some site, linked below) The program runs well however if you try to make a phone call with the blue tooth ear piece while the program is active the program is not available after the call is completed. I had to reset my phone to enable the program again. - source of comment Guess thats related to windows not being to happy theres multiple apps using the headset, lets hope for a next version which auto-disables when calling and re-enables when u hang up.
I'm waiting for this one (Jabra BT530, due end August according to Play.com)... http://www.mobilefun.co.uk/product/16778.htm Got the manual that Jabra put up on their support site for a day or two before taking it off. Manual says it also supports A2DP and can stream music.
And what about battery life? Could somebody using bluetooth stereos write how long the Diamond can last, and what is the overall impact on battery life while listening to music?
I use this headset, its got very good sound and is also nice and comfortable, since i have my tragus peirced i cant wear "normal" headphones! http://www.amazon.co.uk/Sony-DRBT20...6?ie=UTF8&s=electronics&qid=1216998998&sr=8-6 It also works on my pc and my PS3 as a wireless headset/mic!
I have proper enclosed stereo headphones Dell DH-200 with volume control, next and previous track plus play/pause buttons and it all works fine with HTC DT. The only think I am not sure about is which profile it is using, the sound is not as good as when I have it paired with my laptop, which would suggest a low speed profile as opposed to HQ.
You can change the bluetooth profile in Schap's Advanced Config. I've set bitpool to 70, max to 76 and min to 64. Now the sound quality is waaay better.
I can't connect my Jabra 320's (worked with SE W880i) to BT Stereo, it only see's the headphones as a handsfree unit on the HTC
Jawbone. Nothing else comes close (for hands free anyway!). And the new one even matches the Diamond... sort of!
Has anyone suffered the sound periodically dropping out for a second or two, mainly during the first minutes of connection but still persisting now and again several tracks down the playlist?
Stereo Bluetooth Problem
Hi, I have a Palm Treo 750 and an original jawbone bluetooth headset. I was wondering if there's a way for me to play music through my bluetooth headset? Thanks!
i highly doubt it, those types of bluetooth earpieces are designed specifically for talking and as far as i know do not support stereo sound. if you want to listen to music through bluetooth headphones you have to go out and purchase a pair of MotorROKR S9 headphones http://direct.motorola.com/hellomoto/s9/ i own a pair and they are wicked for listening to music, although i'm not a fan of the earbud types of headphones and if you don't have the right sized head they wont fit properly, however they do support stereo sound for music. another point about them, they suck for taking phone calls and talking with them, they pick up way too much background noise, i only use them for music. The only other alternative would be the logitech type, which i believe are more expensive but same idea. and they're not earbuds which appeals to me, i only bought the motorola type cuz they had been reduced to half as much as i remembered them being when i used to work for best buy lol. these are the logitech alternative (never used them so i don't know what they're like although i imagine they kick ass for listening to music) http://www.logitech.com/index.cfm/speakers_audio/headphones/devices/212&cl=US,EN Looking at the product info on the site, these do come with an adapter for any other music device with a jack plug-in that doesn't have built in bluetooth.
[Q] calls and media control using bluetooth and wired head phones
Is there any possibility to use bluetooth clips (Motorola S605, SE MW600, Nokia AD-57 etc.) as mic for answering calls and controlling player (play, pause, next, previous) and using wired headphones connected DIRECTLY to mobile phone in order to use high quality 3.5mm headphones instead of listening through them over bluetooth and having this ****ty sound? Thanks in advance.
Yes, for bluetooth for sure.
Well just to be sure - I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
Could anyone confirm my last post? Thanks.
Bump any answer?
Just tried, no go sorry. If you could find an AVRCP profile device without A2DP or mono-bluetooth output it might work, but I don't expect any exist.
Looking for some help with Bluetooth and Wired audio priorities
Hey guys, I've got a motorcycle helmet with a bluetooth add on which supports stereo music and phone calls. The stereo speakers are located in the helmet and they're great for around town but when I'm on the freeway I like to use earbuds instead. On my original Droid if I plugged in my headphones they would override the bluetooth audio but I would still be able to control some aspects of the music with my bluetooth controls (track forward, track back). Anyway on the Droid X if I plug in my headphones they do not override bluetooth audio, no sound comes through the headphones so in order to play music through my earbuds I have to turn off bluetooth all together. My question is this, is there somewhere I can edit bluetooth priorities? I would like plugged in headphones to have first priority, I'm sure it must be possible since the Droid allowed me to do this, but I'm not sure how to go about doing it. I would really appreciate any insight on this, I've heard tasker may be able to do this but so far have been unable to make it work. Thanks!
[Q] Bluetooth takes precedence over AUX to play audio
I'm in my car a lot. So I like to listen to podcasts, Pandora or music from my Infuse. The problem I'm having now is that I just got a Bluetooth speaker that mounts to my visor. What's happening is when I connect to the Bluetooth speaker and I want to listen to music instead of the music going through the auxiliary port it plays through my Bluetooth speaker. The only way I can fix this is to open my audio player (I use the one that came installed on the infuse) click the menu button and select "via phone." Then I get my podcast or music to play through the auxiliary port. Is there a quicker way to do this or an easier way? I can't just open up Pandora and with my Bluetooth speaker connected have it play through my auxiliary port. It always defaults to playing through bluetooth if it's enabled and connected. I have to manually open my music player select a song then hit menu and change it to "via phone" Its just frustrating. Any help is appreciated.
Dont think so. Why dont you just take your calls through the AUX port instead? i do that and it ways works fine. As for your bluetooth issue. Since your visor clip supports A2DP streamig it will automatically play through bluetooth since its connected Sent from Optimus-Prime's Samsung Infuse 4G
Optimus-Prime, I suppose I could take my calls through the aux port the only thing is I have to jack up the volume to be able to hear the person on the other end. I also have not tested the quality of using my phones speaker vs the quality of the visor mounted Motorola Bluetooth device. I'm hoping/thinking the Motorola will have better audio quality. This I have yet to determine.
rp350z said: Optimus-Prime, I suppose I could take my calls through the aux port the only thing is I have to jack up the volume to be able to hear the person on the other end. I also have not tested the quality of using my phones speaker vs the quality of the visor mounted Motorola Bluetooth device. I'm hoping/thinking the Motorola will have better audio quality. This I have yet to determine. Click to expand... Click to collapse Yeah I do that too on my car but no biggie for me. Sent from Optimus-Prime's Samsung Infuse 4G