Is there any possibility to use bluetooth clips (Motorola S605, SE MW600, Nokia AD-57 etc.) as mic for answering calls and controlling player (play, pause, next, previous) and using wired headphones connected DIRECTLY to mobile phone in order to use high quality 3.5mm headphones instead of listening through them over bluetooth and having this ****ty sound? Thanks in advance.
Yes, for bluetooth for sure.
Well just to be sure - I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
Could anyone confirm my last post? Thanks.
Bump any answer?
Just tried, no go sorry.
If you could find an AVRCP profile device without A2DP or mono-bluetooth output it might work, but I don't expect any exist.
Related
Is it possible to make bluetooth headset as a wireless mic? I would like to use the mic on my BT headset in conjunction with an Audio recorder to record lectures.
I know we can port music into the BT headset. But is it possible to port the mic to the PPC?
Good idea really. As long as I know, the headset really hooks up only during calls
I too am looking to do something like this, but haven't gotten very far yet. Please post any findings. I want to have a better mic to record live music during practices without having to carry a separate portable recorder. So far I have found the internal mic overloads easily and turning on the AGC still doesn't bring down the level enough and has a hard limiter action. So a wireless mic is the next thought. So far I have liked the Resco software the best for audio recording, though I found that mp3 format doesn't work on my FUZE and calls don't come through during playback.
Can anyone verify if darfri is correct that the mic in the headset is only available during a call? Could anyone with a BT headset verify or test if recording uses the internal or BT headset mic? Thanks, I haven't bought my BT headset yet. What I choose depends on how I use it.
just as the title says, is it possible to send music via bt to my stereo just like when i make or recieve calls?
not that i'd use this as a sole way to listen to music in my car, but i just started wondering if it were possible, and if so, how?
It's possible, but you have to make sure that your Stereo has the bluetooth profile for A2DP. It's the same pairing process, but instead of only streaming call audio it will stream any other audio too.
Also, the stereo will have a headphone icon under bluetooth preferences.
Hope this helps.
I do that all the time in my car. The sound quality is not as good as hooking up a cable through th aux jack. The nav direction also come through my car stereo.
Ah yes, I forgot about A2DP being needed... That would make my situation impossible... I'll just have to get a 3.5 mm to RCA plug for aux... Thanks guys.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had some trouble with this, but the key for me was making my Pioneer head unit "forget" my previous phone. Now it works great!
Actually there is a way to stream music wirelessly to your car stereo: mini FM transmitters. Quite cheap on ebay. I wouldn't bet on audio quality tho.
Are there any good in-ear headphones with working previous/next buttons to control next/previous track and volume in any music player?
Hi well I've been using the Altec Lansing BackBeat 903 Bluetooth Headset for about 3 months now and that has all the features your looking for plus they sound damn good as well.
I use the stock headphones with winamp, and double tap the pause button and it skips to the next track
But for a real solution with back.. you could get one of the little reciever thingies with a 3.5 jack, so you get wireless + controls + any headphone you like ^_^. But there could be some quality loss if its cheap..
Motorola's s9-HD also have theses foncions enabled.
Thanks for the replies. Those two seem to be ear-hugging types, are there any with regular design?
the best would be to use the Nokia remotes that came with the n95 and others. But apparently it doesn't work since the layout inside the jack are not the same between Samsung and Nokia... too bad
I have a question about this topic, I tried to use the apple in-ear headphones with the mic and the volume buttons on my SGS but when i fully plug it into the jack, theres no sound.... but if i leave it out abit then it works fine.... Do u guys know what is going on?
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
PhoenixFx said:
But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
Could you please tell me is this possible with bluetooth clips:
I connect wired headphones to SGS directly (not to the bluetooth clip 3.5mm hole), pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons. When the call comes I hear it in headphones and start-stop player or push call answer button on bluetooth clip. After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic. After call is ended I can start-stop playing music again by bluetooth buttons. This is 100% tested or it's is appeared to be working? Thanks.
baribalbear said:
Could you please tell me is this possible with bluetooth clips:
Click to expand...
Click to collapse
I don't think it works like that, but I have to check to confirm.
baribalbear said:
pair the bluetooth clip with SGS, start player and listen to music through headphones and have ability to start-stop player by bluetooth clip buttons.
Click to expand...
Click to collapse
When you are not using BT audio, I doubt the player will respond to BT player controls.
baribalbear said:
After pushing answer button I hear calling person's voice in headphones but talk to the bluetooth mic.
Click to expand...
Click to collapse
I dont think you can split the mic and headset function like that, either you use the BT for both mic and headphone or not at all. (unless someone modifies the driver). But again, something I have to check to confirm.
For basic call and volume controls something like this might work.
Here is another alternative, but no mic (not released yet either).
PhoenixFx said:
Here is what I use (Motorola S605):
Click to expand...
Click to collapse
Very helpful, purchasing from ebay as we speak, im sick of not being able to switch song whilst cycling...
Just a question really, do you just use the standard samsung music player?
PhoenixFx said:
Any Bluetooth headset supporting A2DP (Advanced Audio Distribution Profile : For Stereo audio) and AVRCP (Audio/Video Remote Control Profile) should work. There are plenty of BT headsets out there. Search for A2DP Bluetooth headsets (if they have media player controls then the chances are they support AVRCP too).
I use a Bluetooth clip, it gives a certain amount of wireless freedom and the ability to use any 3.5mm headphone. If you already have a good pair of headphones you like then a BT clip is perhaps the best way to go.
Here is what I use (Motorola S605):
With a display (SonyEricsson WM600 ):
Both of them have a built in Stereo FM radio as well, if you listen to radio that could come in handy (since the radio on SGS is mono ).
EDIT: One last thing, Audio quality over Bluetooth is slightly lower compared to a wired connection. This is due to the compression codec used in Bluetooth transmission. However, the difference depends entirely on your expectation of sound quality and the quality of your audio files. For example if you are an average user who is happy with a pair of $25 head/earphones listening to MP3s encoded at 128kbps then you won't notice a difference. But if you are an audiophile having $100+ headphones listening to 256kbps+ encoded MP3s then you’ll definitely notice a difference.
Click to expand...
Click to collapse
I like these, thanks.
How does this things work? Do you plug anything to the usb port or do you just enable blutooth and play? Also can you use previous/next buttons while the screen is locked? Can you do these with the default player or do you need anything like WidgetLocker and add the player to the lock screen?
Also are there any wired versions of these?
Dear all,
I would like to use my headphones with a bluetooth microphone or headset. I like my earphones and don't want to go through the wireless A2DP BT to listen to music, but in the same time I would like to have the possibility of a hands-free solution. So my question, is it possible to have the sound output on the earphones and the sound input on the mic of a bluetooth headset (like a clip-on on which I don't connect my earphones)
Is there anybody that can fiddle with his device if he has the proper hardware?
Thanks
i think its not possible. if i connect my phone to car, audio-output is only available via bluetooth
splinter03 said:
i think its not possible. if i connect my phone to car, audio-output is only available via bluetooth
Click to expand...
Click to collapse
it allso screws up your audio quality
I use a USB bluetooth dongle with a 3.5 mm headphone jack in my car in order to stream music from my phone. I plug the dongle into the lighter outlet for power and then connect the dongle to the aux jack in the car's stereo. Everything works great when playing any media. However, it won't connect for call audio. If I were to dial a phone number, the sound from the key touches play through the radio, but as soon as the call connects the audio plays through the phone's earpiece. I am not able to get the in call audio to stream through my bluetooth. When I go to the bluetooth settings, I see an option for media audio and nothing for in call audio. If anyone can help me get this fixed, that would be great. Also, I am on CM 10 RC 1, but this did the exact same thing on stock touchwiz.
Bump
I have the same issue on stock. This thread isn't the same as what you're asking, but he does state that he is trying to find a workaround to the same issue.
http://forum.xda-developers.com/showthread.php?t=1875877
Thanks for the reply. However, my issue is that once a call connects, the audio goes through the phone's earpiece. I can only stream media (youtube, Pandora, music, etc.) through Bluetooth, but calls won't connect to my Bluetooth setup at all.
I really hope someone has a solution to this.