Hi guys how are you ? I come here because I need your help, this afternoon my phone just shut down itself with the green famous message " Custom binary blocked by fap lock ". So I just go ODIN and installed the Firmware what I downloaded on SamMobile, after that my phone started normally until the moment where there ask you to set up your language, Wi-Fi, Hours ... my phone started to restart automatically for come back to this same set up. I just have time to set up my language and " Hop " again restart... . I tried to change ODIN version and other Firmware, USB driver aswell, restart my PC but nothing change. Any solutions guys ?
Related
Hello,
I just updated the firmware of my brand new Note 10.1 (N8000) using Kies, which seems to have failed - I can't even turn the device off. I'm a quite experienced computer user, but brand new to Android. Any help or feedback would be very much appreciated (esp. how I can at least turn off the device).
Problem Description:
I have a new Note 10.1 (a German device/I'm in Germany using the Vodafone network, but I guess that shouldn't matter) and installed Kies today. The application identified a new firmware and suggested an update, which I did via USB. Everything appeared to have gone all right - the file got downloaded, transferred to the device, which then showed that it was installing the updates (something like 95 items). No error message. The device then booted, and that's where it seems to be stuck: since then, the device is in an endless loop: Screen is black, a swirling animation comes up, than the Samsung Logo, which stays for like 12 seconds, the screen goes black and it starts from the beginning (in total the loop takes like 15 secondes). Kies cannot connect to the device, and I can't even turn it off, it's just stuck in this endless loop.
Before the update, the device was neither modified nor rooted (I only installed a few apps), and there was no error message during the update (at least none that I saw).
Can anyone help???
Get the firmware file from sammobile and flash with odin. You can find a lot of how to regarding Odin, just do a search and you will find a movie or tutorial.
Here is the fw
http://www.hotfile.com/dl/178817278/616d7ef/N8000XXBLJ9_N8000OXABLJ9_DBT.zip.html
The link is from sammobile, not a mirror, so it's safe.
Or you could just return it for an exchange.
Sent from my GT-N8010 using Tapatalk 2
To turn off, just press power until it turns off (about 10 seconds)...
Kies firmware failed N8010
ultramag69 said:
To turn off, just press power until it turns off (about 10 seconds)...
Click to expand...
Click to collapse
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
EagleTalon1 said:
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
Click to expand...
Click to collapse
I'm having the same issue!!!!!
Kies failed! Odin PASS and stuck in the logo!, it doesnt boot!
You may need to go into recovery and wipe data/cache partition. This will wipe your internal memory of everything but you will get an operational note...
Hi there,
I have a galaxy s6 SMG920F,
i rooted my device when i first purchased, I then decided i wanted to go back to stock so i could update software,
I downloaded a stock rom and proceeded to flash through Odin. v3.10 it got to the end and failed,
And now ii am stuck on a green screen that reads, An error has occurred while updating the software.
Ue the emergency recovery function in the smart switch pc software.
I have doen this twicem and get this error message, Failed to update due to an error. DO you want to run emergency software recover?......You must enter the recovery code from another pc. Please remember the recovery code.
I can still get on download mode, but apart fro that nothing, Including recovery mode vol up home and power.
Please help XDA, i hope i dont have a paperweight!
Thanks in advance
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
i have samsung ace3 7272
from 3 days i woke up i found my phone restarting ..after 20 second it restarted again and again over and over with no stop
i tried to do factory reset from mobile and from (Home+power+ up voulme ) but i couldnot !! i tried to root my mobile but when i open (power+home+up voulme ) and choose the root error ( E:failed to verify whole files signeture ) i downloaded software from internet and tried to put it and i couldnot .. my mobile dont accept any thing .. when i change any thing like turning off wifi when it restarts again it returns on like past i dont know what to do now please help me to fix this problem
try to update your firmware or change your firmware in other country like ksa or eu.
Dear friends...
I bought a brand new j710mn phone yesterday
Well I took it home and attempted to root it. I believe it was successfully rooted but I can't day for sure.
Now I am stuck on a boot screen that has red letters to the top saying custom binary blocked by FRP lock.
Ive been searching all over for a solution but no luck.
I have already tried the following.
1. Flashing stock firmware using Odin via the downloadING screen. But this is blocked by FRP
2. I have tried using Samsung switch.. but it appears as though it does not support the j710
3. I have searched for an sboot file but to no avail. As I've seen that it has worked for those who had a similar problem on their s6edge.
4. I have tried sideloading and installing files using adb and sdcard. But these options have been blocked by frp
5. Of importance I know my username and password for my Google account but I can't get passed the boot screen.
My firmware version is J710MNUBU1APL4
Thanks for anyone knowledgeable enough to assist.
Kind regards
i have the same problem
when i restart my J7 i find this hell error, well , after five hours searching,bricking, a solution dropped, follow this steps written by me.
First of all , install 7zip ,after , download the stock rom from your region, in sam mobile.
ok, now the tutorial starts...
1 - extracts the stock rom in a folder....
2 - rename the "hidden.img" file to "hidden.img.tar"
3 - select all other files(except hidden.im.tar) , right click , 7zip , compress in compacted file , in compress type select tar.
4 - open odin , selec the generated tar in AP/PA, connect the device in download mode already.
5 - flash the file , and when display get black , enter in download mode again and flash the "hidden.img.tar" file.
6 - after that , the device will restart and update system , and the better thing is.... NO FACTORY RESET! nothing will be deleted , all files will stay.
sorry for the bad english :^P