So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
You should check the Amazon listing to see which model number you have. It's probably SM-920F.
Once you have the correct firmware downloaded, Google a guide to flashing Galaxy S6 firmware with Odin. There are a lot of them out there.
krisztiana said:
So I tried to root my Samsung Galaxy S6 today using TWRP and it got stuck in a boot loop. I went to wipe to cache and accidentally wiped to system. So now there is no OS installed. I know I need to somehow put an OS on the device but I'm in Canada and when I go to samsung's site to download the firmware, there is no Canada option. I bought the phone off of amazon and it came with a European wall charger because it was imported, but how do I know what firmware to download?
Also, when I have found the right firmware, how do I flash it onto the device? I can no longer access TWRP, all I can get is the downloading screen thing. Can I use Odin/how do I use Odin?
Somebody help me I'm panicking because I broke my brand new phone!
Click to expand...
Click to collapse
On the back of the phone it should say which model you have, for example G920F, G920W8, G920P etc.
Download the proper firmware from Sammobile, then follow the tutorial that the following thread has a link to.
http://forum.xda-developers.com/galaxy-s6-edge/general/sm-g925f-s6-firmware-thread-t3078841
If the variant you have is the European model, G920F, I recomend you install the unbranded firmware.
IMPORTANT! MAKE SURE YOU HAVE THE PROPER FIRMWARE! INSTALLING THE WRONG FIRMWARE CAN HARD BRICK YOUR DEVICE!
I really hope this advice helped!
Really important is only that you pick the right model to download. The region isn't that important. Go to sammobile and download your stock rom, but be sure to not pick a branded one, because they are full of junk.
Also, you must use ODIN in that Download-Mode. Open ODIN, plug your device into your pc and see, if ODIN shows up your device. If yes, select "PDA" or "AP" (depending on ODIN Version) and select your ROM that you have downloaded. Then click on start. Don't touch your phone, your cable or your computer for best results. Wait ODIN say "PASS" with a green background. If this occurs, your phone should restart and after 10 mins or so, it should boot Android.
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
dwall87 said:
I did the same this as the OP, now I am stuck on the main "Samsung Galaxy S6 Edge Powered by Android" screen. I can boot into TWPR and into download. I have tried flashing zip from external SD card with USB-OTG with no luck, I have tried flashing from Odin, multiple Odin versions tried, multiple usb cords tried, multiple computers tried.. all result with <ID:x/xxx> Can't open serial(COM) port."
No matter what I do, I can't seem to get anything to take, not stock firmware or otherwise. Any suggestions.. donations for anyone who can help me solve. lol $$
Click to expand...
Click to collapse
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
get the model number of your phone and flash the latest firmware through Odin
Milian90 said:
i'm in the same situation , stuck in bootloop for the last 3 days ive tried everything on youtube and forums , with odin with smart swich with kies with twrp , nothing , same bootloop everytime. don'tknow what to do .....
Click to expand...
Click to collapse
In odin under options untick Auto Reboot.
Flash Rom
Phone wont reboot once rom has flashed successfully so you will need to do manual reboot.
Go into recovery mode and wipe data.
Reboot phone
that should help let us know if it works
wifi wont turn on
hi, i managed to install the firmware but now the wifi and bluetooth wont turn on, wifi toggle and bluetooth wont go on, it looks like is trying toget on but after 20 seconds justgo back to off. idont know what to do .........
I can't even get any firmware to load as odin continually stops within seconds of starting to flash phone, no matter what firmware I choose it's the same result failed flash?
Related
Hello,
Here's my issue, I have a Samsung Galaxy S3 i747M (Rogers Canada) and I decided to root my phone to connect a wireless controller for running emulators. I used ODIN 3 and rooted it with the proper ROM and it worked fine. I then noticed it had been running really slow and I wanted to update it to the latest Android platform but in order to do that I need to unroot the phone and return it to the stock ROM because I also figured out that I can hook up the controller with a USB so my phone doesn't need to be rooted anymore. I found the stock CF-Auto rom for my specific phone and carrier and reinstalled ODIN 3 on my computer. When I plug the phone into my computer with ODIN open it recognises it and the COM3 field turns yellow and in the txt box it says that its connected. I load the Stock ROM into PDA and run ODIN. It completes and I get the green "Complete" box and in the txt box it says Complete Disconnect Phone but when I restart my phone it loads the Samsung loading video and then just hangs at the Samsung logo with the blue LED blinking and the only way to shut down the phone is to remove the battery. I am still able to get to the download screen (Vol Down + Home + Power) and also when I loaded the stock ROM in ODIN it said to make sure that F. TIME RESET and AUTO REBOOT is selected but AUTO REBOOT is already checked and I cant turn on F. TIME RESET as the options terminal in ODIN is greyed out and I cant change the options, could this affect it? I know my phone can be saved as its only Soft Bricked its just a matter of how.....PLZ HELP!!!
think you have flashed the rom and theres no os to run other than blank try installing again or else install custom recovery and run a custom rom
Good Luck!
Ok I will try it again today, what is the custom recovery thing and custom rom you're talking about? Sorry im not very savvy when it comes to smart phones, links would help a bunch and someone mentioned to me today to DL a new CF-AUTO stock rom for my phone because it may be the wrong one even though it was labeled for my model. Know of any good sites to get Official Stock Roms for phones?
Thanks
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Ok so I found the newest version of ODIN3 and my actual Stock ROM, /fingerscrossed
If it works Ill post up where I found everything incase someone else comes across this problem with the same phone
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
***RESOLVED***
Ok so, I downloaded ODIN3 by hitting up Google and downloading it from the first link which was from this site (My issue was an out of date ODIN3 program, hence the grayed out options)
I got the stock file for my Samsung Galaxy S3 i747M (Rogers Canada) from SAMMobile (<Google this should be the first link)
This site has everything you need for Samsung anything and its free you just make an account. Also don't make the mistake I did and assume the list of stock files that comes up is all that's there, you have to manually search for your phone model and a list of countries and carriers comes up for that phone. The file was even the most up to date version which was a plus.
Last night my mom asked me if I could format her tablet, because it was too slow (Even for that device), and had a lot of crap on it.
So... I took a look at it and started to google about the tablet. Turns out it hadn't been upgraded to the latest firmware; it was on Android 4.1.2, and as it says here: "sammobile.com/tag/gt-p3100/" the latest available firmware is 4.2.2 .
Thus I tried to update it via software update on the device, but it turned out it wasn't able to update because the tablet has been modified. Then I remembered that a long time ago I tried to root it without much success, but didn't try again because I got bored.
Then I downloaded the 4.2.2 firmware UK version (P3110XXDMH1_P3110OXADMH1_BTU), and flashed it via Odin. Sadly it went wrong and a "Failed!" sign appeared. I can't remember what step failed, but it booted anyways, but this time my PC recognized the device as a "GT-P3110". I thought that maybe it was because the UK firmware was a Vodafone version, so I downloaded the Russian brandless version (P3100XWDMK1_P3100SERDMK2_SER) and flashed; it failed again, but this time the tablet didn't turn on normally.
I can't boot it neither normally, recovery or Download mode, it shows only a message that says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again", which as I read on other android sites and this forum, it's a soft brick message.
Then I tried to do as it said, installed Kies and tried to fix what I've done, but when I enter the device data (Model and "S/N") it shows a message saying that the model info cannot be verified and that the device initialization can't continue.
imgur.com/Y89rnNg
imgur.com/OdZhT6C
So... This is as much info as I can remember about what could've gone wrong, please help me, if I can't fix it, mom will continue to be a liiiiittle too much angry
Beforehand thank you very much.
PS: I had to write wrong the links because I created this account just because I had this problem, so I can't post links.
Woah this happen to me once, but i try to flash it again and its work, this happen when i chose the wrong firmware zip, but it work when i instal the right one, maybe u flash wrong firmware bro, try flash the right rom bro
this message is like download mode, you can connect to pc and flash any firmware via odin
Yes, as said you can go in Download Mode and reflash another good ROM ! Make sure the .tar.md5 is not corrupted.
First my phone was rooted before this but I tried to install XPOSED but it didint work it had me doing a bootloop so i thought about wiping my phone and didint think my OS would get erased now my phone just stays at the SAMSUNG GALAXY S6 screen I installed TWRP but no luck there people told me to install that but no luck I hope I can get some help ive tried to install stock firmware with odin but it keeps saying FAIL please help!
bump
Here are official firmwares for your device. Boot your device into download mode and connect your phone, it should show up in Odin, then select the file you downloaded from sammobile and flash it from there. If you get any errors, please post the log here and I'll take a look at it.
I bought a used samsung s7 Sm-G930F but after using the phone for some days i saw an update release so i decided to update it but after download the update it couldnt install it due to some error i dont know is talking of. So after some days to went off and it couldnt come on. So i decided to flash the firmware BTU on it through odin3 but after get PASS in odin3 it keeps gets stuck on SAMSUNG. I have also try factory reset wipe cache before even doing the firmware flash. Also i try downgrading to 7.0 and 6.0 but didnt work. Please help am guessing am missing something. I also notice something when even i boot the phone in recovery mode and plug to my system, my system recognise as SM-G930S, while at the back is written SM-G930F. Pls provide with any possible solution to this issue.
Used phones are often rebranded as other models to try increase resale value. If it says G930S in download mode then that's the phone you have. If you tried flashing G930F software you've probably soft bricked it.
You could try flashing again but using G930S software.
Beanvee7 said:
Used phones are often rebranded as other models to try increase resale value. If it says G930S in download mode then that's the phone you have. If you tried flashing G930F software you've probably soft bricked it.
You could try flashing again but using G930S software.
Click to expand...
Click to collapse
Thanks for quick respond. In download it says Sm-g930f.but if i plug it to a system in recovery mode it shows as Sm-g930s. So am really confuse. And 8 have flash it with Sm-g920f firmware several times it keeps getting stuck on samsung logo sometimes it even load up to where i start setup with googke account and alk that but getting stuck again and couldnt respond at all.
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Willy1993 said:
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Click to expand...
Click to collapse
You should identify the exact device model.
Then check to download the stock Samsung firmware for this model.
You can read about it here:
[Stock Firmware] Official Stock Firmware for ALL Galaxy S6 Edge Variants [Latest]
Reserved
forum.xda-developers.com